My unit will not power up
My backup camera turns unit on and works
And my Bluetooth phone turns it on and works
But can’t adjust nothing no buttons work
Related
Hi, i have a problem with my unit: JY-UOS03P4 (4GB px5 android 8)
When the unit is long time off, when i turn it on, the touch screen and the physic buttons don't work, only works the steering wheel buttons. For what i have to Reset the unit and loste all the FM frequencies....
Any idea of what i can do?
And some option to keep off the unit when i start the engine of the car and only turn it on when i press the power button?
Sorry for my english.
I have a Honda Fit 2015
I got the ASWC-1 set up and it senses the bluetooth keys in manual program. Atoto will not see those keys when press them. The other keys work fine if you pick the right head unit configuration. I've tried them all and none of the 3 bluetooth (pickup, hangup, ptt) will work with the Atoto. I've also tried manually programming them for vol up/down or other keys like source but it doesn't matter it does nothing.
Any suggestions?
I've recently purchased a Ford specific xtrons head unit which can with all leads and canbus box! However the unit does not power on and off when the key is inserted and will randomly power off while driving! Also the lights on the head unit do not switch on when I turn on my lights and the screen also doesn't dim! Any help would be much appreciated thanks
Hi all
Just picked up an Atoto A6 Pro for my 2014 CRV Touring.
Everything is wired correctly and I popped the unit in.
I am experiencing an issue where the device will not power cycle unless I press the power buttons on the unit itself.
No wake on ignition and it does not turn off with the key removed either.
I verified power is properly reaching the unit with a multimeter (checked ignition power and constant power).
And now I have tried reversing accessory/ignition power on the radio harness. Now the unit will turn on/off with ignition BUT it does not seem to receive any power when ignition is off. Causing it to lose stored time, and to slowly reboot each time the ignition is turned on.
Does anyone have any experience with this?
thanks
I have Junsun V1 head unit with LTE and canbox.
CAN settings is selected as "VW RZC".
Steering wheel buttons working good.
I have not connected KEY 1 and KEY 2. It`s not working. SWC is not working and that is ok, because CAN is working.
The problem is:
When I press volume UP on the wheel, volume down, next, prev - works good
When I press phone button on the steering wheel, the head unit open by default Bluetooth app.
So, when someone is calling to me, I can`t pick up the phone from the steering wheel, because Bluetooth app is opening.
Everything is coded in by CAN (VW RZC).
How to edit can settings? or how to upload new setting? How to change bluetooth for “pick up”?
Once again, please forget about key 1, key 2 and SWC.
Pure CAN recoding.
I would like to know the answer to how to recode CANBUS settings. My volume up and down keys work as expected, but my phone key opens the Bluetooth app also and I want to turn it into a "next track" button and the hang up button into a "previous track" button.
For your problem, there is a submenu in 8878. I think it is in "Other" but possibly in CAN that reverse volume up and down. That should fix that problem. If you can't figure it out I will check next time I'm in my van.