I have Junsun V1 head unit with LTE and canbox.
CAN settings is selected as "VW RZC".
Steering wheel buttons working good.
I have not connected KEY 1 and KEY 2. It`s not working. SWC is not working and that is ok, because CAN is working.
The problem is:
When I press volume UP on the wheel, volume down, next, prev - works good
When I press phone button on the steering wheel, the head unit open by default Bluetooth app.
So, when someone is calling to me, I can`t pick up the phone from the steering wheel, because Bluetooth app is opening.
Everything is coded in by CAN (VW RZC).
How to edit can settings? or how to upload new setting? How to change bluetooth for “pick up”?
Once again, please forget about key 1, key 2 and SWC.
Pure CAN recoding.
I would like to know the answer to how to recode CANBUS settings. My volume up and down keys work as expected, but my phone key opens the Bluetooth app also and I want to turn it into a "next track" button and the hang up button into a "previous track" button.
For your problem, there is a submenu in 8878. I think it is in "Other" but possibly in CAN that reverse volume up and down. That should fix that problem. If you can't figure it out I will check next time I'm in my van.
Related
I have the unit fully installed and working except for the "next" button on my steering wheel. The volume buttons work fine. I am able to map the button to "next track" but the music apps don't respond. I made sure the option to respond to hardware buttons is enabled in the app (dsub).
The same app on my phone will let me use the skip button on BT headphones.
I also remapped the button to "home" to verify its not a vehicle side problem and it worked fine. Hitting "next" on the steering wheel took me to the home screen. I still get the confirmation beep no matter what it is mapped to.
The button input is a varying resistance type if that matters. '09 lincoln towncar using the crux SWC adapter. Only 3 buttons; vol+, vol-, and next.
Any ideas? I was toying with remapping the button to some other function and setting a tasker event to skip track. End call? That should do nothing unless I'm on a call.
I have a Honda Fit 2015
I got the ASWC-1 set up and it senses the bluetooth keys in manual program. Atoto will not see those keys when press them. The other keys work fine if you pick the right head unit configuration. I've tried them all and none of the 3 bluetooth (pickup, hangup, ptt) will work with the Atoto. I've also tried manually programming them for vol up/down or other keys like source but it doesn't matter it does nothing.
Any suggestions?
I have installed an Android 8.1 HU (plug & play and all working).
The only issue I can see is on the SWC buttons, the "next" button is sending the signal as the previous function and the "previous" button is sending the signal as the next function. Used for MP3 music and radio stations.
All other SW buttons are working as expected (vol +, vol -, aswering calls, mute, etc)
After entering to "Car Infortainment > Steering Wheel Buttons" I can see the attached image.
If I press the "next" or "previous" button on the screen with my finger, it starts to blink, then I press the desired button on my SW.
It seems this is not the correct procedure, because I have tried all the options and still, the next and previous buttons are doing the wrong job (pressing the same or the oposstive button).
Anyone knows how to reset in the right way the SWC buttons through the attached image interface?
what did the reseller suggest when contacted for support?
marchnz said:
what did the reseller suggest when contacted for support?
Click to expand...
Click to collapse
Seller has not idea about what advanced/factory settings is and the HU factory is not sharing the real codes for access (they are afraid something might crash).
I could access thanks to a code suggestion from a XDA Dev user.
marchnz said:
what did the reseller suggest when contacted for support?
Click to expand...
Click to collapse
Marchnz, do you know how to reset the SWC buttons in this interface?
So i bought a witson head unit for my ford focus mk3. Everything seems to work fine only i want to remap the voice control button on the steering wheel. Its seems like its hard mapped so when i click on the button it automatically opens the ford sync app. I would like to remove this and make it do something else.
Did you have the same issue as i did and got it fixed please let me know how you remapped the voice control button
Hi all
I installed an Android (10) multimedia in my car. It was purchased from a seller called Autotop on Aliexpress, and everything seem to be working well including the steering wheel buttons.
Only problem is that I would like to set each button on the steering to do other functions then set by default and it simply doesn't work.
When I go to Settings > Steering wheel settings, it asked me to push the buttons and program them, but when I do that either nothing happenes or the buttons who are already set will do the action they supposed to, means the app doesn't communicate with the steering buttons.
Will appreciate any help to program these buttons.
*I noticed a similar thread here from 3 yrs ago, no solution there, hopefully now there is.