I have looked all over for a copy of the EDL firmware for the Axon 7 Mini B2017g Canadian model without success
I bricked mine when it was new when doing an update
I have tried lots of EDL firmwares but none of them work when using the EDL tool
If anyone has a copy of this firmware please send it to me via private email. Alternatively, if you have a backup of yours that you are prepared to share then that will be great. I will do a factory reset as soon as I can boot up
I am able to get into qualcom state 9008 so I have a chance of getting my phone back
Please help me someone
Thanks
thanks dear
tenfiftysix said:
I have looked all over for a copy of the EDL firmware for the Axon 7 Mini B2017g Canadian model without success
I bricked mine when it was new when doing an update
I have tried lots of EDL firmwares but none of them work when using the EDL tool
If anyone has a copy of this firmware please send it to me via private email. Alternatively, if you have a backup of yours that you are prepared to share then that will be great. I will do a factory reset as soon as I can boot up
I am able to get into qualcom state 9008 so I have a chance of getting my phone back
Please help me someone
Thanks
Click to expand...
Click to collapse
Hi,
Would you get any positive reply? I was playing with my mini 7 and now it is bricked. Never happen anything like that.
It would be great to have a copy of the Bell file.
Related
Hi Xda,
i m new here, sorry for my bad English.!
I have a note 4 n910f model and i installed "[5.0.1][N910F] DN ROM from E-Team v0.6" this rom on my Cell phone, it was all working fine and until yesterday my battery was like 13% and it suddenly turned off.
I plugged it to the charger and it was stuck at Samsung Logo, i thought its a boot loop so i Cleared Cache etc..
it didn't work, so i installed this rom again clearing all the Data and it was fine but today while i using Gmail and it suddenly turned off and then samsumg Logo came on the screen and then...:'(, nothing !!.
I plugged it to my laptop via usb cable and it was detected as "qhsusb_dload" so i installed Drivers and now it shows "qualcomm hs-usb qdloader 9008 ".
I think its Hard Bricked :crying:
Anyone with Same Device could help creating a Unbrick Disk image...
Turn download Mode on and Flash Stock Rom.
robotnikz said:
Turn download Mode on and Flash Stock Rom.
Click to expand...
Click to collapse
It doesn't, no Download no Recovery...
i think its Bricked
HusniBaig said:
It doesn't, no Download no Recovery...
i think its Bricked
Click to expand...
Click to collapse
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628
HusniBaig said:
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628
Click to expand...
Click to collapse
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?
Download Kies and use the Emergency recover.
NickVXD said:
Download Kies and use the Emergency recover.
Click to expand...
Click to collapse
Bro I tried it is not being detected by Kies..:'(
Rajada said:
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?
Click to expand...
Click to collapse
No Bro using a Debrick Image It will Boot from SD Card instead of its EMmc Memory...?
Got it..?
Anyone with N910F can get me system files dump,
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
HusniBaig said:
Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
Click to expand...
Click to collapse
HI, I am having the same problem with my note 4 N910F, Will this Debrick image generator work with Note 4?
HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.
Shared a Guide here
http://forum.xda-developers.com/note-4/help/samsung-official-debrick-guide-note-4-t3363248
[email protected]% said:
HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.
Click to expand...
Click to collapse
Hi, I've got the same problem, could you please send me the files so I could try on my sd card. Thanks
This Method Works Only If U Have A fine Working (Not Damaged EMMC)....
please i need the unbrick image for the note 4 sm-n910a for at&t. please if you have the note 4 ,do the file and send me to [email protected] .
the link of my bootloader : http://www.mediafire.com/file/vc49m...196496_REV00_user_low_ship_MULTI_CERT.tar.md5
the link of the method: http://www.mediafire.com/file/53n5r...comm_APQ8084+(includes+SM-N910F)++Rev+3_0.rar
the pit link: http://www.mediafire.com/file/o5wvr5ytx228pen/APQ8084_boot_recovery_v2.rar
password for this is daseul123
please help! scuse my english
thank
Need help please (sm-n910f)
don't have recovery and download mode no power on it shows a qualcomm hs-usb qdloader 9008 on device manager
can any one know to to debrick it please
thank in advance
Greetings everyone. So let me preface this by saying, I do know a fair bit about android, odin and the like so I am familiar with troubleshooting by reverting to stock via odin. I was on my S7 the other day and noticed that it had an update. So, I hit update and let it do it's thing. While updating the screen went pink then restarted.
Phone Info: **S7 Edge T-Mobile | SM-G935TZKATMB**
Now the only screen I am greeted with is:
SBL Error!
SET CP DEBUG
rdx_init!
skip print_summary_to_lcd
SBL ERROR
UPLOAD MODE
Things I've tried:.
1. Recovery mode (Goes to the sbl error screen)
2. Download mode (Goes to the sbl error screen)
3. USB Jig to force download mode (Goes to the sbl error screen, tested the jig on a friends phone, so it indeed works)
4. Opening Odin while the phone is connected to my pc. Shows a com port, but not able to actually flash anything.
The phone is showing in the device manager as a modem and I have tried an EDL cable which puts it into qualcom mode 8008. I am not sure if there is anything that can be done or not. I have a feeling that it might have to be repaired through JTAG. I have seen instances where a file from a working s7edge can be put onto an SD card to revive it but, I've had no luck in finding such a file online and do not know anyone locally with one to get them to do the backup process, Any help would be appreciated.
FIXED! Here is how to fix the issue
Steps to use emergency files (YOU WILL NEED OR MAKE AN EDL CABLE FOR THIS METHOD):
1. Open Files 35 - 50 - 55.rar navigate through to the folder 35 and then extract DEBUG_EMERGENCY_DOWNLOAD_FA60_G935AUCU5ARA2_CL1107 1963_QB16394537_REV02_user_mid_noship_MULTI_CERT.t gz somewhere you can find it, then navigate through the folders "nhols>common>tools>emergency download then extract all files to a new folder.
2. Put your phone into emergency download mode via your EDL cable Run the "recovery.bat" and then once asked input your qualcomm loader port number (found in device manager)
3. If all steps are done correctly then you should be able to use the vol down+home+power into download mode
Link to emergency files Emergency Files
Link to my reddit post as I was troubleshooting the issue Reddit Post
lmao im having same issue as we speak on a g935a myself! if u find a way please help me
I've fixed this issue if anyone still needs help with it!
oSlLENCEo said:
I've fixed this issue if anyone still needs help with it!
Click to expand...
Click to collapse
How did you fix it?
And what carrier SIM is in your phone, T-Mo right?
charter3554 said:
How did you fix it?
And what carrier SIM is in your phone, T-Mo right?
Click to expand...
Click to collapse
Yes, my phone is the s7 Edge T-Mo. Not able to post a link right now, so I'll message you with the information.
oSlLENCEo said:
Yes, my phone is the s7 Edge T-Mo. Not able to post a link right now, so I'll message you with the information.
Click to expand...
Click to collapse
please message me also! asap thanks
oSlLENCEo said:
Yes, my phone is the s7 Edge T-Mo. Not able to post a link right now, so I'll message you with the information.
Click to expand...
Click to collapse
Are you able to post a link now? I am having the same issues after trying to flash a combination file. Actually Chimera tried to flash it and now my phone won't get past this sbl error. I can enter EDL mode but that's about it. And i haven't been able to find the information online anywhere yet. It's becoming very frustrating. If you can't post a link can you send me a message with how to fix this please!?!?
Same Problem
Please help. I have the same problem... My phone is Galaxy S7 Edge. Had software update failed error and followed steps, but that also failed and now stuck with the sbl upload screen...
hello i need help to get out of sbl error. S7 g930p thank you
oSlLENCEo said:
I've fixed this issue if anyone still needs help with it!
Click to expand...
Click to collapse
hello i need help to get out of sbl error. thank you
Help spl error
Could u plz help me with this spl error upload mode on Samsung galaxy s7 edge sm-g935t. Thanks
Frustrated
oSlLENCEo said:
I've fixed this issue if anyone still needs help with it!
Click to expand...
Click to collapse
Yes, please help me with this before my s7 goes through a window lol
Hey guys, sorry I've not been active on this lately. I've had a ton of work. I'll be free tomorrow and will help anyone who has asked for it in this thread.
hec2k said:
lmao im having same issue as we speak on a g935a myself! if u find a way please help me
Click to expand...
Click to collapse
flash : Samsung_G935x_QC_Rooted_BOOT ,use modified odin (prince comsy),works for me
oSlLENCEo said:
Hey guys, sorry I've not been active on this lately. I've had a ton of work. I'll be free tomorrow and will help anyone who has asked for it in this thread.
Click to expand...
Click to collapse
Please help us, I hace the sane problem :bueno:
Hello friends I have an S7 g930p with SBL ERROR will not let me do anything, I HAVE THE EDL CABLE but there is no recognize port, I want to know if there is a combination to be able to recognize the port.
oscard0426 said:
Hello friends I have an S7 g930p with SBL ERROR will not let me do anything, I HAVE THE EDL CABLE but there is no recognize port, I want to know if there is a combination to be able to recognize the port.
Click to expand...
Click to collapse
Are you getting into EDL mode properly? Your screen should be black if you are in EDL mode, and you'll get a Qualcomm loader device in your ports section of device manager.
oSlLENCEo said:
Are you getting into EDL mode properly? Your screen should be black if you are in EDL mode, and you'll get a Qualcomm loader device in your ports section of device manager.
Click to expand...
Click to collapse
Hi,
I already have EDL cable. can you tell me how to put in to EDL mode. thank.
Thank you so much!
So i have it recognize the qualcom port and i do the recover file, but any button combo will not work. If i have it in edl do i need to press the buttons? Also i need the firmware for a 935t. Can anybody help me out as i know im just missing steps. Thank you
Hello bro
I have Samsung S7 US Cellular variant model is SM-G930R4 and I have the exactly same error on my screen, it came during an update which went fail at the end and initially it was showing a blue screen written instruction to use Verizon update app to download the right firmware but then somehow went into this SBL ERROR screen.
Could you please guide where to find the files as you use for S7 Edge above?
Really appreciate for your help!
Regards
Hello,
as per subject I need help rooting my device I tried all methods, @tdm method is using the US version and it is different from the EU one.
my spec:
7.1.1 (stock)
ZTE B2017GV1.2.0B13
Bootloader Locked
tulip is not working, I can't get the device to enter fastboot/EDL mode no matter how I tried.
please help guys :crying::crying::crying:
If you cannot get to EDL mode, try an EDL cable (aka. deep flash cable). Like this:
https://www.amazon.com/gp/aw/d/B0792YKWPZ
I bought one. It works great. But it takes a couple weeks to ship from China.
If you are impatient, you can try this method, but be very careful:
http://en.miui.com/thread-310325-1-1.html
I have also tried this method and it works.
Note, you can unplug the phone to retrieve the wire. Once in EDL mode, the phone will stay in EDL mode until it is reset.
axtenar said:
Hello,
as per subject I need help rooting my device I tried all methods, @tdm method is using the US version and it is different from the EU one.
my spec:
7.1.1 (stock)
ZTE B2017GV1.2.0B13
Bootloader Locked
tulip is not working, I can't get the device to enter fastboot/EDL mode no matter how I tried.
please help guys :crying::crying::crying:
Click to expand...
Click to collapse
Have you tried Axon 7 EDL tool? It forces the phone into EDL mode and works for the mini too.
donev_go said:
Have you tried Axon 7 EDL tool? It forces the phone into EDL mode and works for the mini too.
Click to expand...
Click to collapse
For mini is [Axon7 mini EDL Tool].
Recently rooted my galaxy s10+, seemed to work fine at first, just the camera app causing the phone to crash, right now it's in a constant reboot loop where i can't enter recovery or download mode.
Phone is instantly rebooting when I plug in a usb cable so adb won't recognize the device nor will my pc in general.
Read up on a lot of threads online & what got recommended on older threads was booting from a debrick image off of your sd card, although i'm unsure if this'll work. regardless not that I can no longer boot the phone I'm unsure of how to generate this file to begin with, which is why I was hoping one of you guys might be able to help me out with generating or linking me to said debrick image.
Or if anyone knows of another way to possibly fix my phone, please do let me know.
Thanks in advance,
A galaxy s10+ user
I don't think there is a debrick image for the S10 or S10 plus. You might want to try flashing your stock firmware in Odin.
Not sure how I am supposed to flash it without having acces to Recovery or Download mode. Any suggestions
You can't get into recovery or download mode? Sounds like you might be hard bricked then. In that case, a phone repair shop might be your best bet.
Carry on with key combi v down and Bixby plus power
Sent from my SM-G975F using Tapatalk
followed this thread https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145
ended up soft bricking my v35 i used with a project FI sim card. Spent hours working on this and I am at the point where I will pay to have my computer controlled and this taken care of for me. I have tried flashing every partition in qfil and cannot get the device to boot. Shoot me a message if you can unbrick this phone. Im using verizon on my galaxy s8+ but the screen is cracked and i cannot afford a new phone so i though id fix this one. Unfortunately its taking too much time for me to figure out what is wrong with it. I can boot into 9008 with the button dance but no combination of .img files in qfil ever get download mode to reconize the phone as something other than unknown or any back to stock firmware. Thanks guys.
Did you try to flash abl_a, abl_b, laf_a and laf_b partitions? Were you on Oreo or Pie? Which files are using to replace? Try abl and laf from the Android version you had. Try following my post #74 on that same thread, i think the files i posted there are from Pie but not sure.