[Help Needed !!] HARD BRICKED Note 4 N910F - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi Xda,
i m new here, sorry for my bad English.!
I have a note 4 n910f model and i installed "[5.0.1][N910F] DN ROM from E-Team v0.6" this rom on my Cell phone, it was all working fine and until yesterday my battery was like 13% and it suddenly turned off.
I plugged it to the charger and it was stuck at Samsung Logo, i thought its a boot loop so i Cleared Cache etc..
it didn't work, so i installed this rom again clearing all the Data and it was fine but today while i using Gmail and it suddenly turned off and then samsumg Logo came on the screen and then...:'(, nothing !!.
I plugged it to my laptop via usb cable and it was detected as "qhsusb_dload" so i installed Drivers and now it shows "qualcomm hs-usb qdloader 9008 ".
I think its Hard Bricked :crying:
Anyone with Same Device could help creating a Unbrick Disk image...

Turn download Mode on and Flash Stock Rom.

robotnikz said:
Turn download Mode on and Flash Stock Rom.
Click to expand...
Click to collapse
It doesn't, no Download no Recovery...
i think its Bricked

HusniBaig said:
It doesn't, no Download no Recovery...
i think its Bricked
Click to expand...
Click to collapse
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628

HusniBaig said:
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628
Click to expand...
Click to collapse
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?

Download Kies and use the Emergency recover.

NickVXD said:
Download Kies and use the Emergency recover.
Click to expand...
Click to collapse
Bro I tried it is not being detected by Kies..:'(

Rajada said:
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?
Click to expand...
Click to collapse
No Bro using a Debrick Image It will Boot from SD Card instead of its EMmc Memory...?
Got it..?

Anyone with N910F can get me system files dump,
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45

Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45

HusniBaig said:
Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
Click to expand...
Click to collapse
HI, I am having the same problem with my note 4 N910F, Will this Debrick image generator work with Note 4?

HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.

Shared a Guide here
http://forum.xda-developers.com/note-4/help/samsung-official-debrick-guide-note-4-t3363248

[email protected]% said:
HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.
Click to expand...
Click to collapse
Hi, I've got the same problem, could you please send me the files so I could try on my sd card. Thanks

This Method Works Only If U Have A fine Working (Not Damaged EMMC)....

please i need the unbrick image for the note 4 sm-n910a for at&t. please if you have the note 4 ,do the file and send me to [email protected] .
the link of my bootloader : http://www.mediafire.com/file/vc49m...196496_REV00_user_low_ship_MULTI_CERT.tar.md5
the link of the method: http://www.mediafire.com/file/53n5r...comm_APQ8084+(includes+SM-N910F)++Rev+3_0.rar
the pit link: http://www.mediafire.com/file/o5wvr5ytx228pen/APQ8084_boot_recovery_v2.rar
password for this is daseul123
please help! scuse my english
thank

Need help please (sm-n910f)
don't have recovery and download mode no power on it shows a qualcomm hs-usb qdloader 9008 on device manager
can any one know to to debrick it please
thank in advance

Related

SM-N910F Bricked...

Hi,
Before post i've read everywhere, but i can't solve my problem.
I've a Note 4 n910f that is bricked. My phone doesn't go in recovery or bootloader and won't charge.
I've tried to made an sd-card with odin (t-flash mode) that was succesfully created but if I put it in the phone, when i try to turn it on it vibrate once. Without sd-card it does nothing.
Windows see my phone as "qhsusb_dload"
Anyone can help? thanks
enzo82 said:
Hi,
Before post i've read everywhere, but i can't solve my problem.
I've a Note 4 n910f that is bricked. My phone doesn't go in recovery or bootloader and won't charge.
I've tried to made an sd-card with odin (t-flash mode) that was succesfully created but if I put it in the phone, when i try to turn it on it vibrate once. Without sd-card it does nothing.
Windows see my phone as "qhsusb_dload"
Anyone can help? thanks
Click to expand...
Click to collapse
Hi ,
I have the same problem with my SM-N910F can you please send me the SD card image
thank you :highfive:
enzo82 said:
Hi,
Before post i've read everywhere, but i can't solve my problem.
I've a Note 4 n910f that is bricked. My phone doesn't go in recovery or bootloader and won't charge.
I've tried to made an sd-card with odin (t-flash mode) that was succesfully created but if I put it in the phone, when i try to turn it on it vibrate once. Without sd-card it does nothing.
Windows see my phone as "qhsusb_dload"
Anyone can help? thanks
Click to expand...
Click to collapse
How did you brick it? The reason I ask is because it's almost impossible to brick a Note 4.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button. *
Android.Ninja said:
How did you brick it? The reason I ask is because it's almost impossible to brick a Note 4.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button. *
Click to expand...
Click to collapse
I brick it flashing with ODIN a costum ROM but it was interrupted by ODIN fail message ( aboot error and SBl1 error ) and after that the note never turns on and when I plug it to my laptop it shows qualcomm hs-usb qdloader 9008 in device manager without qualcomm mmc storage usb under disk drive.
Help me please !!! :crying::crying::crying::crying:

Hard bricked note 4 SM-N910F (qualcomm hs-usb qdloader 9008)

Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
IronDrass said:
Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
Click to expand...
Click to collapse
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
Click to expand...
Click to collapse
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Sad to hear about it. Try using "USB Jig". It has worked for the note 3 so hopefully it will work for the note 4 too. It will bring your phone to the download mode. Then you can flash the official firmware for your 910F model. http://www.ebay.com/itm/Micro-USB-J...ng-Galaxy-S4-S3-S2-S-Note-3-2-1-/331298393201
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Click to expand...
Click to collapse
I think to perform this guide i should have a working Note N910F which I don't have .
IronDrass said:
I think to perform this guide i should have a working Note N910F which I don't have .
Click to expand...
Click to collapse
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
koka365 said:
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
Click to expand...
Click to collapse
Or it seems that you can use a USB JIG. I didnt know about the usb jig for note 4 but I guess there is one.
i bricked my note 4
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
I will try next week
salim333 said:
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
Click to expand...
Click to collapse
dyasten said:
I will try next week
Click to expand...
Click to collapse
Next week has passed, can we have the microsd image you have generated ?
rajkosto said:
Next week has passed, can we have the microsd image you have generated ?
Click to expand...
Click to collapse
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
You don't need the digitizer to work for this, only the microsd port, and hardware buttons.
dyasten said:
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
Click to expand...
Click to collapse
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
jawad.amjad said:
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
Click to expand...
Click to collapse
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
yashthemw said:
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
Click to expand...
Click to collapse
What's the decryption key ?
Usamad said:
What's the decryption key ?
Click to expand...
Click to collapse
Try this one
https://mega.nz/#!qt81HZiS!-XyNN1m_TEi8dvGrjnEQsxClpfzk7nT_0DliYFJDPew
Reporting via N910G
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Usamad said:
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Click to expand...
Click to collapse
It doesnt matters , what is there after n910f .
Flash the latest bootloader available for n910f .
Tsar3000 has recovery firmware for note 4 .
Search for "recovery firmware tsar3000 " on google.
In that file you will get a complete stock firmware (ap , bl , cp ,csc ,pit).
Download it and use the bootloader .
As far as i know , the flashing of those files on sd card , should be done via a functional
note 4 .
There is another method of creating debrick image , a tmobile user has already got one debrick image working .
Reporting via N910G
same problem bro, stuck at the t flash.
did anyone found a solution?
can we post a request to the guys that have a working N910F in the other threads (ROMS for example) so they make an image for our dead N910F.
Hey guys, i successfully created a Debrick.img for note 4 , used my own functional note 4 to create one .
http://forum.xda-developers.com/showthread.php?t=3488114
Don't forget to Press thanks .
Reporting Via N910G
Full Unbrick Solution N910F
Working solution: pastebin (dot) com/7KQxRRNF
^^ I'm not able to post outside links. So I had to improvise with pastebin.

[SOLVED] Galaxy J5 not booting and also can't boot into Download or Recovery mode

So, after I've updated my J500h to the newest firmware, my phone is stuck at the Samsung logo and the screen is also slowly turning green. So the problem is that I CAN'T boot into recovery or download mode. Odin recognizes the devices when it's hanging at the boot screen. ADB also recognizes the device after a few minutes:
Code:
E:/platform_tools>adb devices
List of devices attached:
18019a5b unauthorized
So, the problem is that I can't boot into download mode... Otherwise I would already flashed the stock firmware.
When connected to USB, the phone sometimes vibrates.
Can someone please help me? I've tried everything, but nothing helped
Does someone have any idea's to solve this problem? Looks like it's bricked.
gg. you just messed up the bootloader...
only way is jtag, nothing else...
H3XabyT3LV said:
gg. you just messed up the bootloader...
only way is jtag, nothing else...
Click to expand...
Click to collapse
Thanks for the answer. I will try jtag to restore the bootloader.
Fixed.
How
TheModzOn said:
Fixed.
Click to expand...
Click to collapse
tell us how?
First tried JTAG, didn't worked.
Searched on Google for a debrick.img file, found it, "flashed" it on my micro sdcard, booted from the sdcard and from that into Download Mode and flashed the stock Firmware
TheModzOn said:
First tried JTAG, didn't worked.
Searched on Google for a debrick.img file, found it, "flashed" it on my micro sdcard, booted from the sdcard and from that into Download Mode and flashed the stock Firmware
Click to expand...
Click to collapse
Please share it with me .. Please
Come on just share it already!
SPYMAN2000 said:
Come on just share it already!
Click to expand...
Click to collapse
frfwr963 said:
Please share it with me .. Please
Click to expand...
Click to collapse
Here it is (J500h 6.0.1 marshmallow): https://drive.google.com/file/d/0B-R9lQbH9_gCUFBKMWNoUmJyeUE/view?usp=sharing

Hard bricked note 4 sm-n910g death, qualcomm mode. Tried everything... help me

My note 4 dead while flashing with odin. No charging, no download mode, no response completely dead?. tried usb jig, Unbrick image everything. but no luck, nothing worked. No warranty for my mobile. It is Detected as Qualcomm HS_USB QDLoader 9008 in system ports. QFIL tool detects this but need 3 files. prog_emmc_firehose_xx.mbn , rawprogram0xml, and path0.xml. i googled it but no files for note 4. i believe QFIL tool bring back to life my device. Please help me to fix this.
Sudheerdarling said:
My note 4 dead while flashing with odin. No charging, no download mode, no response completely dead?. tried usb jig, Debrick image everything. but no luck, nothing worked. No warranty for my mobile. It is Detected as Qualcomm HS_USB QDLoader 9008 in system ports. QFIL tool detects this but need 3 files. prog_emmc_firehose_xx.mbn , rawprogram0xml, and path0.xml. i googled it but no files for note 4. i believe QFIL tool bring back to life my device. Please help me to fix this.
Click to expand...
Click to collapse
Have you referred this thread:
https://forum.xda-developers.com/showthread.php?t=3488114
Sent from my SM-N920G using Tapatalk
yashthemw said:
Have you referred this thread:
https://forum.xda-developers.com/showthread.php?t=3488114
Sent from my SM-N920G using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply, all ready i tried. but no luck . after a whole night freezing, followed everything as you sad, flashed image file in SDHC memory. tried to power on many times in different ways as per instructions. but not even vibrate. no power on. is any different method here?
Sudheerdarling said:
Thanks for your reply, all ready i tried. but no luck . after a whole night freezing, followed everything as you sad, flashed image file in SDHC memory. tried to power on many times in different ways as per instructions. but not even vibrate. no power on. is any different method here?
Click to expand...
Click to collapse
Hi Sudheer,
hav u fixed ur mobile ?
if yes tell me how i will giv a try...
mine is a N910G India model....i hav tried all the methods but unsuccessful...kindly help
SAME here same problem / u fixed it ?
is your phone stuck in qualcomm mode or are u trying to get into it?
what was the last thing you were doing or what was the cause of the fail?

Samsung J5 SM-J530F hard bricked?

Hi, i have a SM-J530F with black screen.. device manager recognized only as exynos7880.(win7 x64)0 And it appears as it is going on a bootloop. ( the device manager loops on connected/disconnected)
cannot enter download mode/recovery mode.
Usb jig to force download mode not working.
Battery full charged, 4.2volt
any ideas?
thanks in advance
Maybe you can go to nearest customer care service for quick help
You need someone with the same device to flash the .zip here to create an in brick image for your device. Then follow the steps here to unbrick https://forum.xda-developers.com/galaxy-j5/how-to/how-to-unbrick-galaxy-j5-sm-j500h-t3536287 its for a 2015 model but should also work for you
So find someone with the exact device model to flash the unbrick-Creator.zip and follow the guide
garylawwd said:
You need someone with the same device to flash the .zip here to create an in brick image for your device. Then follow the steps here to unbrick https://forum.xda-developers.com/galaxy-j5/how-to/how-to-unbrick-galaxy-j5-sm-j500h-t3536287 its for a 2015 model but should also work for you
So find someone with the exact device model to flash the unbrick-Creator.zip and follow the guide
Click to expand...
Click to collapse
thnks man will try it now and tell you how it go
Sei poi riuscito? L immagine del 2015 andava bene?
Qex said:
thnks man will try it now and tell you how it go
Click to expand...
Click to collapse
did it work?
Qex said:
Hi, i have a SM-J530F with black screen.. device manager recognized only as exynos7880.(win7 x64)0 And it appears as it is going on a bootloop. ( the device manager loops on connected/disconnected)
cannot enter download mode/recovery mode.
Usb jig to force download mode not working.
Battery full charged, 4.2volt
any ideas?
thanks in advance
Click to expand...
Click to collapse
did u fix it??
Hi all,
is there a way to get a J510FN debrick image?

Categories

Resources