Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
IronDrass said:
Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
Click to expand...
Click to collapse
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
Click to expand...
Click to collapse
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Sad to hear about it. Try using "USB Jig". It has worked for the note 3 so hopefully it will work for the note 4 too. It will bring your phone to the download mode. Then you can flash the official firmware for your 910F model. http://www.ebay.com/itm/Micro-USB-J...ng-Galaxy-S4-S3-S2-S-Note-3-2-1-/331298393201
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Click to expand...
Click to collapse
I think to perform this guide i should have a working Note N910F which I don't have .
IronDrass said:
I think to perform this guide i should have a working Note N910F which I don't have .
Click to expand...
Click to collapse
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
koka365 said:
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
Click to expand...
Click to collapse
Or it seems that you can use a USB JIG. I didnt know about the usb jig for note 4 but I guess there is one.
i bricked my note 4
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
I will try next week
salim333 said:
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
Click to expand...
Click to collapse
dyasten said:
I will try next week
Click to expand...
Click to collapse
Next week has passed, can we have the microsd image you have generated ?
rajkosto said:
Next week has passed, can we have the microsd image you have generated ?
Click to expand...
Click to collapse
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
You don't need the digitizer to work for this, only the microsd port, and hardware buttons.
dyasten said:
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
Click to expand...
Click to collapse
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
jawad.amjad said:
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
Click to expand...
Click to collapse
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
yashthemw said:
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
Click to expand...
Click to collapse
What's the decryption key ?
Usamad said:
What's the decryption key ?
Click to expand...
Click to collapse
Try this one
https://mega.nz/#!qt81HZiS!-XyNN1m_TEi8dvGrjnEQsxClpfzk7nT_0DliYFJDPew
Reporting via N910G
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Usamad said:
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Click to expand...
Click to collapse
It doesnt matters , what is there after n910f .
Flash the latest bootloader available for n910f .
Tsar3000 has recovery firmware for note 4 .
Search for "recovery firmware tsar3000 " on google.
In that file you will get a complete stock firmware (ap , bl , cp ,csc ,pit).
Download it and use the bootloader .
As far as i know , the flashing of those files on sd card , should be done via a functional
note 4 .
There is another method of creating debrick image , a tmobile user has already got one debrick image working .
Reporting via N910G
same problem bro, stuck at the t flash.
did anyone found a solution?
can we post a request to the guys that have a working N910F in the other threads (ROMS for example) so they make an image for our dead N910F.
Hey guys, i successfully created a Debrick.img for note 4 , used my own functional note 4 to create one .
http://forum.xda-developers.com/showthread.php?t=3488114
Don't forget to Press thanks .
Reporting Via N910G
Full Unbrick Solution N910F
Working solution: pastebin (dot) com/7KQxRRNF
^^ I'm not able to post outside links. So I had to improvise with pastebin.
Related
Hello All,
I Hard bricked my N9005 while downgrading form Stock 5.0 to stock N9005VJUBMI7 (4.3 ?).
Note 3 N9005 32GB .. was working well on Android 5.0, except GPS issue and battery drain issue. So, I thought will go back to older stock ROM.
While flashing N9005VJUBMI7 (from Sammobile ) on Odin, without any PIt file and Re-partition unchecked. Odin flash completed and it said successful.
But, after this, phone never booted. Power button doesn't work. Download mode keys won't work. Recovery mode keys won't work. Charger doesn't work. USB doesn't detect on PC. LED never lit. Is this state called HARD-BRICKED? Or its a step ahead and completely dead ?!
I tried the debrick.img on SD card method using the thread by ValenteL. Followed below steps:
On Windows 7, used win32DiskImager, and created the rescue micros SD card (16GB) using debrick image of 4.4.2. Inserted SD card on phone, put battery and tried to see if phone boots. Unfortunately, it didn't Tried to play around with all keys, long press for 30 secs, usb cable, charger.. etc. But, still no luck.
Please let me know if any suggestions to bring the device back alive!
Thanks in advance !!
maesiva said:
Hello All,
I Hard bricked my N9005 while downgrading form Stock 5.0 to stock N9005VJUBMI7 (4.3 ?).
Note 3 N9005 32GB .. was working well on Android 5.0, except GPS issue and battery drain issue. So, I thought will go back to older stock ROM.
While flashing N9005VJUBMI7 (from Sammobile ) on Odin, without any PIt file and Re-partition unchecked. Odin flash completed and it said successful.
But, after this, phone never booted. Power button doesn't work. Download mode keys won't work. Recovery mode keys won't work. Charger doesn't work. USB doesn't detect on PC. LED never lit. Is this state called HARD-BRICKED? Or its a step ahead and completely dead ?!
I tried the debrick.img on SD card method using the thread by ValenteL. Followed below steps:
On Windows 7, used win32DiskImager, and created the rescue micros SD card (16GB) using debrick image of 4.4.2. Inserted SD card on phone, put battery and tried to see if phone boots. Unfortunately, it didn't Tried to play around with all keys, long press for 30 secs, usb cable, charger.. etc. But, still no luck.
Please let me know if any suggestions to bring the device back alive!
Thanks in advance !!
Click to expand...
Click to collapse
You should have known that you can not downgrade from 5 to 4.3.
maesiva said:
Hello All,
I Hard bricked my N9005 while downgrading form Stock 5.0 to stock N9005VJUBMI7 (4.3 ?).
Note 3 N9005 32GB .. was working well on Android 5.0, except GPS issue and battery drain issue. So, I thought will go back to older stock ROM.
While flashing N9005VJUBMI7 (from Sammobile ) on Odin, without any PIt file and Re-partition unchecked. Odin flash completed and it said successful.
But, after this, phone never booted. Power button doesn't work. Download mode keys won't work. Recovery mode keys won't work. Charger doesn't work. USB doesn't detect on PC. LED never lit. Is this state called HARD-BRICKED? Or its a step ahead and completely dead ?!
I tried the debrick.img on SD card method using the thread by ValenteL. Followed below steps:
On Windows 7, used win32DiskImager, and created the rescue micros SD card (16GB) using debrick image of 4.4.2. Inserted SD card on phone, put battery and tried to see if phone boots. Unfortunately, it didn't Tried to play around with all keys, long press for 30 secs, usb cable, charger.. etc. But, still no luck.
Please let me know if any suggestions to bring the device back alive!
Thanks in advance !!
Click to expand...
Click to collapse
Remove battery fore some minutes then go download mode again and downgrade to nk2
kenny1991 said:
You should have known that you can not downgrade from 5 to 4.3.
Click to expand...
Click to collapse
Gee.. Got to know about it 'hard' way
What you suggest?
meawww said:
Remove battery fore some minutes then go download mode again and downgrade to nk2
Click to expand...
Click to collapse
Sorry, my phone is too adamant. It won't go to download mode. All I want is to get it into download mode! Would jig help? What you think? Spend some 3$ on eBay?
Worth a try with the jig before paying for a service centre repair .
JJEgan said:
Worth a try with the jig before paying for a service centre repair .
Click to expand...
Click to collapse
Tried the ebay JIG.. No luck. Note 3 still not up..
JIG is good.. ensured with other (working) Samsung phone. It puts into download mode, but not to my Note 3
Hi,
Before post i've read everywhere, but i can't solve my problem.
I've a Note 4 n910f that is bricked. My phone doesn't go in recovery or bootloader and won't charge.
I've tried to made an sd-card with odin (t-flash mode) that was succesfully created but if I put it in the phone, when i try to turn it on it vibrate once. Without sd-card it does nothing.
Windows see my phone as "qhsusb_dload"
Anyone can help? thanks
enzo82 said:
Hi,
Before post i've read everywhere, but i can't solve my problem.
I've a Note 4 n910f that is bricked. My phone doesn't go in recovery or bootloader and won't charge.
I've tried to made an sd-card with odin (t-flash mode) that was succesfully created but if I put it in the phone, when i try to turn it on it vibrate once. Without sd-card it does nothing.
Windows see my phone as "qhsusb_dload"
Anyone can help? thanks
Click to expand...
Click to collapse
Hi ,
I have the same problem with my SM-N910F can you please send me the SD card image
thank you :highfive:
enzo82 said:
Hi,
Before post i've read everywhere, but i can't solve my problem.
I've a Note 4 n910f that is bricked. My phone doesn't go in recovery or bootloader and won't charge.
I've tried to made an sd-card with odin (t-flash mode) that was succesfully created but if I put it in the phone, when i try to turn it on it vibrate once. Without sd-card it does nothing.
Windows see my phone as "qhsusb_dload"
Anyone can help? thanks
Click to expand...
Click to collapse
How did you brick it? The reason I ask is because it's almost impossible to brick a Note 4.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button. *
Android.Ninja said:
How did you brick it? The reason I ask is because it's almost impossible to brick a Note 4.
Developers don't need no stinkin' signature!
If I've been able to help you, please hit the "Thanks" button. *
Click to expand...
Click to collapse
I brick it flashing with ODIN a costum ROM but it was interrupted by ODIN fail message ( aboot error and SBl1 error ) and after that the note never turns on and when I plug it to my laptop it shows qualcomm hs-usb qdloader 9008 in device manager without qualcomm mmc storage usb under disk drive.
Help me please !!! :crying::crying::crying::crying:
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help
after my phone is detected qhsub bulk in the pc (hardbrick). today when i put it the pc the message "kernel is not seandroid ..." apear in red small character at the corner of screen ,and then the battery is charging and the red led is on .but in the parameter of peripherals it is detected as unknown device(Port_#0002.Hub_#0003) . i tried to install samsung drivers but no result .
so can i flash a rom for this phone?
nounou2016 said:
after my phone is detected qhsub bulk in the pc (hardbrick). today when i put it the pc the message "kernel is not seandroid ..." apear in red small character at the corner of screen ,and then the battery is charging and the red led is on .but in the parameter of peripherals it is detected as unknown device(Port_#0002.Hub_#0003) . i tried to install samsung drivers but no result .
so can i flash a rom for this phone?
Click to expand...
Click to collapse
Is it showing up in odin?
Sent from my SM-N910G using Tapatalk
yes it show up , then i tried to flash a rom when it began emdiatly it failed "pit repartition not found" then i exit from odin and remove the battery , i download the pit partition ,then i tried to put the phone in download mode no result , again "qhsubs bulk". what is the solution for this?
what i can 't understand, before when it was hardbricked(qhsubs bulk) i didn't do anything , but after some days the download mode enable !!!!!
nounou2016 said:
yes it show up , then i tried to flash a rom when it began emdiatly it failed "pit repartition not found" then i exit from odin and remove the battery , i download the pit partition ,then i tried to put the phone in download mode no result , again "qhsubs bulk". what is the solution for this?
what i can 't understand, before when it was hardbricked(qhsubs bulk) i didn't do anything , but after some days the download mode enable !!!!!
Click to expand...
Click to collapse
Go to note4/511 and download each and every file except for the one named as apq8084.pit :
https://mega.nz/#F!QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng
This is a recovery firmware, load all the files in their respective slots of odin and select repartition & f.reset time, also untick auto reboot.
Thats it, flash.
For any further query, refer this thread:
https://forum.xda-developers.com/showthread.php?t=3488114
Reporting Via N910G.
i need your help , how can i remove the debrick img from sd card , my sd is 16 gb and now only 18mb because i write a debrick img in it
i format the sd card but no result
nounou2016 said:
i need your help , how can i remove the debrick img from sd card , my sd is 16 gb and now only 18mb because i write a debrick img in it
i format the sd card but no result
Click to expand...
Click to collapse
If you ask this question in the thread that I have mentioned above, then there is a slight chance that it will be answered. Cause I dont know how to do that.
Is your phone working now?
Reporting Via N910G.
yashthemw said:
If you ask this question in the thread that I have mentioned above, then there is a slight chance that it will be answered. Cause I dont know how to do that.
Is your phone working now?
Reporting Via N910G.
Click to expand...
Click to collapse
no my phone is not working i can't get the download mode and the led notification don't become red when it charges , so i the method od dyasten didn't work with me , and the phone just vibrate so how do you think of this http://www.droidsavvy.com/unbrick-qualcomm-mobiles/ ??
i did't try it because i think it can brick the phone forever , so ?
Hi guys can you help me please i am facing a big problem with my Samsung note 4 SM-n910F stock Rom 6.0.1 android i slept last night and i left my phone charging normal then in the morning my phone never turns on and when I plug the usb cable on my laptop it shows a qualcomm hs-usb qdloader 9008 on device manager can you help me please it is my only phone i use i wrote many threads in different forums with no response at all
Very mysterious. There can be 2 reasons: 1. Your samsung device may have updated last night, this may happen even if you have turned it off. Your samsung device may have lost power during updating and failed verfication. I think so because you wrote that it shows blackscreen in but still appears in qcom port. 2. Your hardware may have been damaged, it may happen. You can first try to download your stock firmware https://www.sammobile.com/firmwares/ and odin tool, to unbrick your device. good luck.
JonasHS said:
Very mysterious. There can be 2 reasons: 1. Your samsung device may have updated last night, this may happen even if you have turned it off. Your samsung device may have lost power during updating and failed verfication. I think so because you wrote that it shows blackscreen in but still appears in qcom port. 2. Your hardware may have been damaged, it may happen. You can first try to download your stock firmware https://www.sammobile.com/firmwares/ and odin tool, to unbrick your device. good luck.
Click to expand...
Click to collapse
nope its didn't update at all no update support for my device the latest rom is already installed years ago stock rom android 6.0.1 the latest supported rom for my device when i plug it on my pc i hear usb sound normal
This is 90% of all cases software errors. You should try using odin with stock formware. If that does not work, I'm afraid there's a short circuit on the ssd drive.
JonasHS said:
This is 90% of all cases software errors. You should try using odin with stock formware. If that does not work, I'm afraid there's a short circuit on the ssd drive.
Click to expand...
Click to collapse
but i can't go put it in download mode for odin
pasted from a random site:
This is for Samsung note4 N910F:
For avoiding any more confusions , i have gathered all the links that are important .
These are the only files that you will need to debrick a n910f ,download them all and you are good to go :
This is the debrick.img :
https://mega.nz/#!PpVXga4R!AAAAAAAAA...AAAQ9oBW-CmsNk
The next is win32diskimager :
https://mega.nz/#!PtUDGArB!AAAAAAAAA...AAAOtL_pacxLGc
Qualcomm drivers: https://mega.nz/#!4lNliRYJ!3blyZgKug...2UjUIckEFhMRks
This is the recovery firmware for n910f (go to note4/511 and download each and every file ):
https://mega.nz/#F!QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng
This is the procedure:
-Open win32diskimager, load the debrick.img(3.74gb for n910f
-Flash it on a blank sd card, the card should be completely formatted and should be in fat32 format.
[/B ]-Once done, put that sd card in your bricked device.
-Connect it to your pc.
-Hold the power button for at least 10 sec or try the download mode key trio.
-It should vibrate.
-If it doesnt, hold it in front of an air conditioner,
let it cool( this has been tested).
-If it still doesnt vibrates, remove the battery, hold the power button for 10sec and then insert the battery.
-Now again try to press power button.
>So, once it vibrates, leave it for around 5min.
-Then press the volume down key+power+home.
-It should boot in to download mode.
-Now you can flash stock rom or recovery firmware
recommend flashing customs roms tho stock rom sucks
if I helped, please press Like!!!
notnoelchannel said:
pasted from a random site:
This is for Samsung note4 N910F:
For avoiding any more confusions , i have gathered all the links that are important .
These are the only files that you will need to debrick a n910f ,download them all and you are good to go :
This is the debrick.img :
https://mega.nz/#!PpVXga4R!AAAAAAAAA...AAAQ9oBW-CmsNk
The next is win32diskimager :
https://mega.nz/#!PtUDGArB!AAAAAAAAA...AAAOtL_pacxLGc
Qualcomm drivers: https://mega.nz/#!4lNliRYJ!3blyZgKug...2UjUIckEFhMRks
This is the recovery firmware for n910f (go to note4/511 and download each and every file ):
https://mega.nz/#F!QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng
This is the procedure:
-Open win32diskimager, load the debrick.img(3.74gb for n910f
-Flash it on a blank sd card, the card should be completely formatted and should be in fat32 format.
[/B ]-Once done, put that sd card in your bricked device.
-Connect it to your pc.
-Hold the power button for at least 10 sec or try the download mode key trio.
-It should vibrate.
-If it doesnt, hold it in front of an air conditioner,
let it cool( this has been tested).
-If it still doesnt vibrates, remove the battery, hold the power button for 10sec and then insert the battery.
-Now again try to press power button.
>So, once it vibrates, leave it for around 5min.
-Then press the volume down key+power+home.
-It should boot in to download mode.
-Now you can flash stock rom or recovery firmware
recommend flashing customs roms tho stock rom sucks
if I helped, please press Like!!!
Click to expand...
Click to collapse
i can't download its ask a key to download from mega
Lone_Wolf21 said:
i can't download its ask a key to download from mega
Click to expand...
Click to collapse
Galaxy Note 4 N910T FIXED HARD BRICKED
Hi, i know that this is not the developer's side of the forum, but since i haven't posted a lot, i'm unable to create it over there, but, i have good news for you guys who have a NOTE 4 N910T (T-MOBILE) THIS PROCESS WORKS WITH THE 32GB DEVICE...
forum.xda-developers.com
notnoelchannel said:
Galaxy Note 4 N910T FIXED HARD BRICKED
Hi, i know that this is not the developer's side of the forum, but since i haven't posted a lot, i'm unable to create it over there, but, i have good news for you guys who have a NOTE 4 N910T (T-MOBILE) THIS PROCESS WORKS WITH THE 32GB DEVICE...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks bro
Hello Lone_Wolf21,
I just wanted to ask if you tried this at all, and if it worked? If so, did you lose any data?
Thank you in advance.
Put it in a freezer bag & toss it in the freezer for a hour or 2 try turning it on after that.