Related
[Q] Galaxy Note 3(N9005) - HARD BRICKED, Detected on PC as "QHSUSB_BULK" device
My Note 3 (SM N9005 - Lollipop Version) has been hard bricked. It doesn't powering up, no sign of any light/vibration. Looks like a dead phone.
When I connect my phone on PC, Device manager detect it as "QHSUSB_BULK" device. But on Odin 3.09 it doesn't detect anything.
Please please help me, PLEASE...........
Olyul said:
My Note 3 (SM N9005 - Lollipop Version) has been hard bricked. It doesn't powering up, no sign of any light/vibration. Looks like a dead phone.
When I connect my phone on PC, Device manager detect it as "QHSUSB_BULK" device. But on Odin 3.09 it doesn't detect anything.
Please please help me, PLEASE...........
Click to expand...
Click to collapse
Possible solution: HERE.
Joku1981 said:
Possible solution: HERE.
Click to expand...
Click to collapse
I have tried, it didn't work. I was using lollipop version.
debrick.img didn't work as I couldn't find the image file of lollipop.
PLEASE HELP ME TO GET OUT OF THIS PROBLEM!!!
Same here, i have a N9005 and tried all debrick img's present in the forums with a 32gb SD Card and no success.
Is there a Lollipop debrick image? Or if i have access to another N9005 (without root) how can i create one?
Regards.
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails.....is there a solution for this.....please help
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode and is detected by odin, but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
spamming please
Dear all,
Could somebody help me please. My Note 3 LTE (N9005) can not make/ receive calls. I can use internet, play song, etc...
When I make/ receive call phone is hanging too long and also call is can not reach to another phone.
I have tried to fix too many way.
1. EFS restore.
2. Cache clear (even flash new rom also)
3. Update kernel.
4. Restore my old working backup before.
PS. I'm using Audax ROM (lolipop).
I hope someone can help me out from this things.
Thanks in advance.
Hi Xda,
i m new here, sorry for my bad English.!
I have a note 4 n910f model and i installed "[5.0.1][N910F] DN ROM from E-Team v0.6" this rom on my Cell phone, it was all working fine and until yesterday my battery was like 13% and it suddenly turned off.
I plugged it to the charger and it was stuck at Samsung Logo, i thought its a boot loop so i Cleared Cache etc..
it didn't work, so i installed this rom again clearing all the Data and it was fine but today while i using Gmail and it suddenly turned off and then samsumg Logo came on the screen and then...:'(, nothing !!.
I plugged it to my laptop via usb cable and it was detected as "qhsusb_dload" so i installed Drivers and now it shows "qualcomm hs-usb qdloader 9008 ".
I think its Hard Bricked :crying:
Anyone with Same Device could help creating a Unbrick Disk image...
Turn download Mode on and Flash Stock Rom.
robotnikz said:
Turn download Mode on and Flash Stock Rom.
Click to expand...
Click to collapse
It doesn't, no Download no Recovery...
i think its Bricked
HusniBaig said:
It doesn't, no Download no Recovery...
i think its Bricked
Click to expand...
Click to collapse
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628
HusniBaig said:
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628
Click to expand...
Click to collapse
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?
Download Kies and use the Emergency recover.
NickVXD said:
Download Kies and use the Emergency recover.
Click to expand...
Click to collapse
Bro I tried it is not being detected by Kies..:'(
Rajada said:
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?
Click to expand...
Click to collapse
No Bro using a Debrick Image It will Boot from SD Card instead of its EMmc Memory...?
Got it..?
Anyone with N910F can get me system files dump,
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
HusniBaig said:
Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
Click to expand...
Click to collapse
HI, I am having the same problem with my note 4 N910F, Will this Debrick image generator work with Note 4?
HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.
Shared a Guide here
http://forum.xda-developers.com/note-4/help/samsung-official-debrick-guide-note-4-t3363248
[email protected]% said:
HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.
Click to expand...
Click to collapse
Hi, I've got the same problem, could you please send me the files so I could try on my sd card. Thanks
This Method Works Only If U Have A fine Working (Not Damaged EMMC)....
please i need the unbrick image for the note 4 sm-n910a for at&t. please if you have the note 4 ,do the file and send me to [email protected] .
the link of my bootloader : http://www.mediafire.com/file/vc49m...196496_REV00_user_low_ship_MULTI_CERT.tar.md5
the link of the method: http://www.mediafire.com/file/53n5r...comm_APQ8084+(includes+SM-N910F)++Rev+3_0.rar
the pit link: http://www.mediafire.com/file/o5wvr5ytx228pen/APQ8084_boot_recovery_v2.rar
password for this is daseul123
please help! scuse my english
thank
Need help please (sm-n910f)
don't have recovery and download mode no power on it shows a qualcomm hs-usb qdloader 9008 on device manager
can any one know to to debrick it please
thank in advance
Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Update - I found out the phone was still under warranty so I sent it away to be repaired. It was repaired and I now have a working phone !
ylmcc said:
Tried installing custom recovery didn't work out like I had hoped now im stuck with a phone that isn't detected by odin or kies but by MiFlash
Please tell me there is something I can do to fix it or get it to some sort of working order..? Is there a jtag tool or usb jig I can use?
Click to expand...
Click to collapse
What have you done to reach that state? I know that you're desperate but you must give some details if you want help.
It was given to me with 5.1.1 installed however it failed mid process and while on 5.1.1 it kept freezing and acting weird such as boot with weird errors and they only appeared after it was updated, I decided to root it with odin and it never fully rebooted after the was root applied. I finally got it to boot to stock and rooted and decided to install a custom recovery which was twrp while selecting the recovery it said if its a wrong location it will brick, with this in mind I checked the model with the one on their site and it seemed to make sense and applied it.
This caused the original problem which made it boot straight to download mode with it saying it could not normal boot. I then googled the problem and one said the pit was corrupted and downloaded the correct file. I then applied this through odin with stock firmware and it refuse to flash. At the time I was thinking a restart on the device would help, but it resulted in not booting at all and not being detected....
It does not light up or make a vibration when its connected or powered on if there is any solution it would be great...
Can anyone help or point in the right direction?
Hard brick SM-910F
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
[email protected] said:
Hello! If this is the good recovery for the N910F he would have from start.
Try to boot via the recovery flight up + home + power.
If you TWRP flash a custom in a first time rom
Click to expand...
Click to collapse
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
ylmcc said:
Nothing however the pc did detect a new driver called qualcomm hs-usb qdloader 9008
Click to expand...
Click to collapse
qualcomm emergency download mode. is it called.
Tunestwo said:
qualcomm emergency download mode. is it called.
Click to expand...
Click to collapse
Anything I can do to get some sort of os on the phone now?
in this case via Odin tries to reinstall the tar of the official rom N910F .
ylmcc said:
Anything I can do to get some sort of os on the phone now?
Click to expand...
Click to collapse
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
mangui said:
Can you tell us if you can get on recovery screen, either TRWP or stock, or download mode.
Click to expand...
Click to collapse
The phone does not display or respond when the keys are pressed, just a black screen..
Battlehero said:
You could try installing these drivers:
https://www.androidfilehost.com/?fid=24499762636000789
Reboot just in case and try to connect your device again.
(In download mode, with the key combination)
Click to expand...
Click to collapse
Chrome detected a virus in the rar
ylmcc said:
The phone does not display or respond when the keys are pressed, just a black screen..
Chrome detected a virus in the rar
Click to expand...
Click to collapse
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Battlehero said:
Really? I just scanned it with VirusTotal and it is clean.
Virus Total Results
32Bit.exe scan results
64Bit.exe scan results
Click to expand...
Click to collapse
I'll download it again but windows defender detected it too.
Edit - Yep did it again, here is a link to a photo of what I get but from virus total I don't get why its being flagged perhaps false positive ??
Update
Found a jtag service that is cheap will update once I get it back...
sm-n910f
I got a brick note 4 and i want to fix it
I search over the internet for this solution and found a method
Sd card repair boot but it did not work at all
I need help
thank you in advance
Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
IronDrass said:
Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
Click to expand...
Click to collapse
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
Click to expand...
Click to collapse
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Sad to hear about it. Try using "USB Jig". It has worked for the note 3 so hopefully it will work for the note 4 too. It will bring your phone to the download mode. Then you can flash the official firmware for your 910F model. http://www.ebay.com/itm/Micro-USB-J...ng-Galaxy-S4-S3-S2-S-Note-3-2-1-/331298393201
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Click to expand...
Click to collapse
I think to perform this guide i should have a working Note N910F which I don't have .
IronDrass said:
I think to perform this guide i should have a working Note N910F which I don't have .
Click to expand...
Click to collapse
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
koka365 said:
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
Click to expand...
Click to collapse
Or it seems that you can use a USB JIG. I didnt know about the usb jig for note 4 but I guess there is one.
i bricked my note 4
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
I will try next week
salim333 said:
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
Click to expand...
Click to collapse
dyasten said:
I will try next week
Click to expand...
Click to collapse
Next week has passed, can we have the microsd image you have generated ?
rajkosto said:
Next week has passed, can we have the microsd image you have generated ?
Click to expand...
Click to collapse
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
You don't need the digitizer to work for this, only the microsd port, and hardware buttons.
dyasten said:
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
Click to expand...
Click to collapse
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
jawad.amjad said:
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
Click to expand...
Click to collapse
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
yashthemw said:
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
Click to expand...
Click to collapse
What's the decryption key ?
Usamad said:
What's the decryption key ?
Click to expand...
Click to collapse
Try this one
https://mega.nz/#!qt81HZiS!-XyNN1m_TEi8dvGrjnEQsxClpfzk7nT_0DliYFJDPew
Reporting via N910G
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Usamad said:
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Click to expand...
Click to collapse
It doesnt matters , what is there after n910f .
Flash the latest bootloader available for n910f .
Tsar3000 has recovery firmware for note 4 .
Search for "recovery firmware tsar3000 " on google.
In that file you will get a complete stock firmware (ap , bl , cp ,csc ,pit).
Download it and use the bootloader .
As far as i know , the flashing of those files on sd card , should be done via a functional
note 4 .
There is another method of creating debrick image , a tmobile user has already got one debrick image working .
Reporting via N910G
same problem bro, stuck at the t flash.
did anyone found a solution?
can we post a request to the guys that have a working N910F in the other threads (ROMS for example) so they make an image for our dead N910F.
Hey guys, i successfully created a Debrick.img for note 4 , used my own functional note 4 to create one .
http://forum.xda-developers.com/showthread.php?t=3488114
Don't forget to Press thanks .
Reporting Via N910G
Full Unbrick Solution N910F
Working solution: pastebin (dot) com/7KQxRRNF
^^ I'm not able to post outside links. So I had to improvise with pastebin.
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help