after my phone is detected qhsub bulk in the pc (hardbrick). today when i put it the pc the message "kernel is not seandroid ..." apear in red small character at the corner of screen ,and then the battery is charging and the red led is on .but in the parameter of peripherals it is detected as unknown device(Port_#0002.Hub_#0003) . i tried to install samsung drivers but no result .
so can i flash a rom for this phone?
nounou2016 said:
after my phone is detected qhsub bulk in the pc (hardbrick). today when i put it the pc the message "kernel is not seandroid ..." apear in red small character at the corner of screen ,and then the battery is charging and the red led is on .but in the parameter of peripherals it is detected as unknown device(Port_#0002.Hub_#0003) . i tried to install samsung drivers but no result .
so can i flash a rom for this phone?
Click to expand...
Click to collapse
Is it showing up in odin?
Sent from my SM-N910G using Tapatalk
yes it show up , then i tried to flash a rom when it began emdiatly it failed "pit repartition not found" then i exit from odin and remove the battery , i download the pit partition ,then i tried to put the phone in download mode no result , again "qhsubs bulk". what is the solution for this?
what i can 't understand, before when it was hardbricked(qhsubs bulk) i didn't do anything , but after some days the download mode enable !!!!!
nounou2016 said:
yes it show up , then i tried to flash a rom when it began emdiatly it failed "pit repartition not found" then i exit from odin and remove the battery , i download the pit partition ,then i tried to put the phone in download mode no result , again "qhsubs bulk". what is the solution for this?
what i can 't understand, before when it was hardbricked(qhsubs bulk) i didn't do anything , but after some days the download mode enable !!!!!
Click to expand...
Click to collapse
Go to note4/511 and download each and every file except for the one named as apq8084.pit :
https://mega.nz/#F!QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng
This is a recovery firmware, load all the files in their respective slots of odin and select repartition & f.reset time, also untick auto reboot.
Thats it, flash.
For any further query, refer this thread:
https://forum.xda-developers.com/showthread.php?t=3488114
Reporting Via N910G.
i need your help , how can i remove the debrick img from sd card , my sd is 16 gb and now only 18mb because i write a debrick img in it
i format the sd card but no result
nounou2016 said:
i need your help , how can i remove the debrick img from sd card , my sd is 16 gb and now only 18mb because i write a debrick img in it
i format the sd card but no result
Click to expand...
Click to collapse
If you ask this question in the thread that I have mentioned above, then there is a slight chance that it will be answered. Cause I dont know how to do that.
Is your phone working now?
Reporting Via N910G.
yashthemw said:
If you ask this question in the thread that I have mentioned above, then there is a slight chance that it will be answered. Cause I dont know how to do that.
Is your phone working now?
Reporting Via N910G.
Click to expand...
Click to collapse
no my phone is not working i can't get the download mode and the led notification don't become red when it charges , so i the method od dyasten didn't work with me , and the phone just vibrate so how do you think of this http://www.droidsavvy.com/unbrick-qualcomm-mobiles/ ??
i did't try it because i think it can brick the phone forever , so ?
Related
Hello guys (and girls?)
I tried to root my Note 4 (SM-N910f) and failed! Now I cant even start my phone. It keeps restarting with some text and number up left corner.
When I try to restart phone via HOME BUTTON, POWER BUTTON AND VOLUME DOWN BUTTON a message appears and says that firmware recovery problem encountered.
what should i do?? (Besides paying for it)
Hacmemet said:
Hello guys (and girls?)
I tried to root my Note 4 (SM-N910f) and failed! Now I cant even start my phone. It keeps restarting with some text and number up left corner.
When I try to restart phone via HOME BUTTON, POWER BUTTON AND VOLUME DOWN BUTTON a message appears and says that firmware recovery problem encountered.
what should i do?? (Besides paying for it)
Click to expand...
Click to collapse
hi ,
in short ,this is what i have done in past ( to get out of soft brick )........................Flash correct stock ROM with Odin .!
Pull battery and insert again ,then same as above Home ,power, volume down to try to get into download mode ..?
if so ,connect to pc and flash correct stock via Odin.
futher ..
i have N910F ,stock Rom ,..BOC5 ..rooted with cf autoroot ( make sure you have correct zip, for you phone and software ? ) and running a custom recovery, CWM .( also make sure you have correct version CWM ..see screenshot is what i used to flash CWM )
Good luck
willcor said:
hi ,
in short ,this is what i have done in past ( to get out of soft brick )........................Flash correct stock ROM with Odin .!
Pull battery and insert again ,then same as above Home ,power, volume down to try to get into download mode ..?
if so ,connect to pc and flash correct stock via Odin.
futher ..
i have N910F ,stock Rom ,..BOC5 ..rooted with cf autoroot ( make sure you have correct zip, for you phone and software ? ) andrunning a custom recovery, CWM .
Good luck
Click to expand...
Click to collapse
Hello, thanks for the reply!
I cant seem to find the right version (Bootloader?) for my Note 4. It also says that i need to connnect with Kies but Kies dosent seem to connect with my phone.
Hacmemet said:
Hello, thanks for the reply!
I cant seem to find the right version (Bootloader?) for my Note 4. It also says that i need to connnect with Kies but Kies dosent seem to connect with my phone.
Click to expand...
Click to collapse
hi ,
don't understand with what you mean right version ?
what device you have ..eg N910F........?
what software running on phone ..see phone .../settings /about device.....eg N910FXXUIBOC5
My thoughts on KIES is not good ..( never worked for me )
i flash my software /root /recovery via ODIN
good luck
Plz help me to root my phobe
Sent from my X1 Beats using XDA Free mobile app
dazzling dhana said:
Plz help me to root my phobe
Sent from my X1 Beats using XDA Free mobile app
Click to expand...
Click to collapse
hi ,
you seem to be in wrong "phone /device " forum ?
search for your correct phone /device using XDA search .
Bottom line ,never heard of a "phobe " ?
sorry ,can't help .
good luck
willcor said:
hi ,
don't understand with what you mean right version ?
what device you have ..eg N910F........?
what software running on phone ..see phone .../settings /about device.....eg N910FXXUIBOC5
My thoughts on KIES is not good ..( never worked for me )
i flash my software /root /recovery via ODIN
good luck
Click to expand...
Click to collapse
Hello
I cant start my phone up, i can eather go into download mode or a screen which says i need to recover firmware.
and yes I have SM-N910F .. I still dont know exactly what to do!
Hacmemet said:
Hello
I cant start my phone up, i can eather go into download mode or a screen which says i need to recover firmware.
and yes I have SM-N910F .. I still dont know exactly what to do!
Click to expand...
Click to collapse
hi ,
First ,im not sure what you mean with "start ". your phone,is it commpletely "dead " ?
if so have you plugged it into wallsocket/charged ? and then tried again ?
Can you boot up your phone /do you see Samsung logo ?
What happens when you do ...power /volume down/home button ...?
If you can boot and see Samsung logo, what i can suggest( at this stage )
is to search for video on XDA /or Youtube .
how to enter download mode ..
eg
https://www.youtube.com/watch?v=p-zvwUS6as4
This should give you idea about download mode .
good luck
willcor said:
hi ,
First ,im not sure what you mean with "start ". your phone,is it commpletely "dead " ?
if so have you plugged it into wallsocket/charged ? and then tried again ?
Can you boot up your phone /do you see Samsung logo ?
What happens when you do ...power /volume down/home button ...?
If you can boot and see Samsung logo, what i can suggest( at this stage )
is to search for video on XDA /or Youtube .
how to enter download mode ..
eg
https://www.youtube.com/watch?v=p-zvwUS6as4
This should give you idea about download mode .
good luck
Click to expand...
Click to collapse
Hello. I get to see the samsung Logo but that is as far it goes, then it restarts before it gets on dekstop and then over and over.
UNSLESS I PUSH home buttion, volume......then it goes to download mode - but my phone can recoer with kies and i dont know what to do with Odin.
Hacmemet said:
Hello. I get to see the samsung Logo but that is as far it goes, then it restarts before it gets on dekstop and then over and over.
UNSLESS I PUSH home buttion, volume......then it goes to download mode - but my phone can recoer with kies and i dont know what to do with Odin.
Click to expand...
Click to collapse
If your Phone is able to go in Recovery Mode(Press Powerbutton+Volume UP+HOME to go in RecoveryMode) Either its Stock Recovery Or Custom recovery....
Wipe/Format every thing......
Than try to Go in Download mode if Suceeded than you should Try to Download this & Flash VIA Odin its Stock Touchwiz Lollipop Multi CSC firmware....
or Download Your Rom from Sammobile Here
I hope your problem will be solved
Hacmemet said:
Hello. I get to see the samsung Logo but that is as far it goes, then it restarts before it gets on dekstop and then over and over.
UNSLESS I PUSH home buttion, volume......then it goes to download mode - but my phone can recoer with kies and i dont know what to do with Odin.
Click to expand...
Click to collapse
hi ,
well if you can see Samsung logo ,that good !!
your phone seems to be soft bricked..( not really very big problem ,don't worry ..!!!! )
Only way to fix , is to flash your current stock ROM .
if you prefer Kies well ,i stated in above post that i don't think much of Kies .
One point i would like to point out.
Download mode ...
first pull battery ..then insert battery
if you hold buttons ..home +power + volume ......you get to a triangle warning........then press volume up again ..download mode (you will see same as screenshot( its an old foto of my Note 2 , but similar ) ....download mode ..Green Android man ..note if you want to get out of this ..pull battery )
good luck
post note
i have had same problem as you in past once or twice...!
fixed it with reflashing correct stock rom .
So just try to think positively ,it really very small issue .
THanks DUDE!!!
i do "wipe system" via recovery . and now I have Official recovery , becuse i install it by mistake
and my phone It does not connect to computer .
how i can fix it ? are there something like recovery (update.zip) to install it from official recovery ? or any thing please
sorry for my language bad .
Wrong thread
shohag2018 said:
Wrong thread
Click to expand...
Click to collapse
i'm sorry , but please help me !
iM7umd said:
i'm sorry , but please help me !
Click to expand...
Click to collapse
You'll want to use ODIN to restore your phone to normal. Your computer will not recognized your phone as a USB storage device, but ODIN should be able to see it.
You'll need to find the correct ODIN files for your phone type (Tmobile, Verizon, etc and the ROM combo). If you just go to "http://forum.xda-developers.com/galaxy-s5" you'll see different sections based on the service provider; the ODIN files will be in there somewhere.
Once you find the thread there will be accompanying instructions on what to do.
Donut42 said:
You'll want to use ODIN to restore your phone to normal. Your computer will not recognized your phone as a USB storage device, but ODIN should be able to see it.
You'll need to find the correct ODIN files for your phone type (Tmobile, Verizon, etc and the ROM combo). If you just go to "http://forum.xda-developers.com/galaxy-s5" you'll see different sections based on the service provider; the ODIN files will be in there somewhere.
Once you find the thread there will be accompanying instructions on what to do.
Click to expand...
Click to collapse
thank's for your reply .
I've experimented with many files ODIN. but any of them did not succeed !
and before this problem, No computer connects to mobile !
model phone : G-900F :crying:
download mode working? press all at the same time: vol down + menu + power button. then follow instruction (press vol up to confirm enter download mode).
once your phone on download mode then connect to PC. ODIN should recognize your phone n flash it. (i assume your PC has all driver installed and u have correct firmware for yr variant)
Don"t freak out.
iM7umd said:
thank's for your reply .
I've experimented with many files ODIN. but any of them did not succeed !
and before this problem, No computer connects to mobile !
model phone : G-900F :crying:
Click to expand...
Click to collapse
Mohammed this thread is probably going to be closed. because again its not where it should be. so PM me if this isn't clear .
i wipe system every time i try a new ROM. so dont panic okay
whatever the issue with RECOVERY it doesn't matter if the odin mode or download is still reachable.
if u having trouble with PC recognizing odin mode on your phone. try to make sure u have both samsung usb and google usb drivers.
( NOTE: if it still doesnt recognized it try another usb cable. )
http://developer.samsung.com/technical-doc/view.do?v=T000000117
http://developer.android.com/sdk/win-usb.html
and if it does launch ODIN 3.09 . and make sure that u have the right firmware for g-900f in good state not corrupted.
an-_-dro said:
download mode working? press all at the same time: vol down + menu + power button. then follow instruction (press vol up to confirm enter download mode).
once your phone on download mode then connect to PC. ODIN should recognize your phone n flash it. (i assume your PC has all driver installed and u have correct firmware for yr variant)
Click to expand...
Click to collapse
it's work ! but i can't connect the device to my computer. i try some device other, it's connect !
i have samsung drives .
dark3bod said:
Mohammed this thread is probably going to be closed. because again its not where it should be. so PM me if this isn't clear .
i wipe system every time i try a new ROM. so dont panic okay
whatever the issue with RECOVERY it doesn't matter if the odin mode or download is still reachable.
if u having trouble with PC recognizing odin mode on your phone. try to make sure u have both samsung usb and google usb drivers.
( NOTE: if it still doesnt recognized it try another usb cable. )
http://developer.samsung.com/technical-doc/view.do?v=T000000117
http://developer.android.com/sdk/win-usb.html
and if it does launch ODIN 3.09 . and make sure that u have the right firmware for g-900f in good state not corrupted.
Click to expand...
Click to collapse
i'm sorry for this , I did not know where I put this problem !
anyway , thank's for your reply . and i'll tell you what happened in detail.
please .. any kernel.zip work with official recovery ! .
i did replacement for charge port ! but it's don't work also ! ..
please any body help me ?
Hello ! anybody ..
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
nemo0002253 said:
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
Click to expand...
Click to collapse
Download this all samsung recovery and flash via odin. Helped for me with bootloop.
https://www.dropbox.com/s/c3byn50jvboo7nv/All samsung recovery.tar?dl=0
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
nemo0002253 said:
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
Click to expand...
Click to collapse
Install the latest verson of kies on you computer.
Then in kies under "Tools" choose "firmware upgrade and initialisation".
Then give you model number "SM-N910?", next give serial number of the phone (you can find that on the sticker behind the battery in your phone).
Then you get a message that the "device can be initialised to its original setting"
Press ok and ok again. Then put your phone in download mode and connect to the computer and press "start upgrade".
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
nemo0002253 said:
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
Click to expand...
Click to collapse
Happened to me also 2 days ago.
Your mobile only can enter download mode ? but when u try to go to recovery or just power it , nothing happened , right ??
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
APCOtech said:
Well , do as @dewingerd said
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Ify2gen2 said:
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Click to expand...
Click to collapse
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
APCOtech said:
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
Click to expand...
Click to collapse
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Ify2gen2 said:
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Click to expand...
Click to collapse
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
APCOtech said:
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
Click to expand...
Click to collapse
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Ify2gen2 said:
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Click to expand...
Click to collapse
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
thanks i will give a try and post my feedback
APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Ify2gen2 said:
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Click to expand...
Click to collapse
You are welcome , what matters is your phone is back
APCOtech said:
You are welcome , what matters is your phone is back
Click to expand...
Click to collapse
yes my phone is back but not fully back. I am having a bad IMEI, phone is not registering on network and i have mistakenly delected my EFS backup........my bad!
Can i get a working EFS backup of the same phone model (n910c) and restore it on my note 4 n910c? will it restore back my IMEI?
APCOtech said:
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
vzaen said:
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
Click to expand...
Click to collapse
Try to download the appropriate firmware with Samfirm_reborn0.3.6.2 you'll find on Github. Unpack the .zip and start as admin.
Insert full device name and region and additionally check "binary nature" box.
It should download the latest! ROM multiple file format from Samsungs servers directly, at least it did for all my 7 devices (just in case) before I rooted them.
BUT I know that for N910V nothing is found and don't know about S model.
KIES I never used as I read it sometimes conflicts with Odin.
If files are downloaded flash with Odin adding the different files in their input fields. (selve explaining names)
Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
IronDrass said:
Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
Click to expand...
Click to collapse
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
Click to expand...
Click to collapse
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Sad to hear about it. Try using "USB Jig". It has worked for the note 3 so hopefully it will work for the note 4 too. It will bring your phone to the download mode. Then you can flash the official firmware for your 910F model. http://www.ebay.com/itm/Micro-USB-J...ng-Galaxy-S4-S3-S2-S-Note-3-2-1-/331298393201
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Click to expand...
Click to collapse
I think to perform this guide i should have a working Note N910F which I don't have .
IronDrass said:
I think to perform this guide i should have a working Note N910F which I don't have .
Click to expand...
Click to collapse
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
koka365 said:
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
Click to expand...
Click to collapse
Or it seems that you can use a USB JIG. I didnt know about the usb jig for note 4 but I guess there is one.
i bricked my note 4
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
I will try next week
salim333 said:
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
Click to expand...
Click to collapse
dyasten said:
I will try next week
Click to expand...
Click to collapse
Next week has passed, can we have the microsd image you have generated ?
rajkosto said:
Next week has passed, can we have the microsd image you have generated ?
Click to expand...
Click to collapse
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
You don't need the digitizer to work for this, only the microsd port, and hardware buttons.
dyasten said:
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
Click to expand...
Click to collapse
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
jawad.amjad said:
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
Click to expand...
Click to collapse
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
yashthemw said:
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
Click to expand...
Click to collapse
What's the decryption key ?
Usamad said:
What's the decryption key ?
Click to expand...
Click to collapse
Try this one
https://mega.nz/#!qt81HZiS!-XyNN1m_TEi8dvGrjnEQsxClpfzk7nT_0DliYFJDPew
Reporting via N910G
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Usamad said:
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Click to expand...
Click to collapse
It doesnt matters , what is there after n910f .
Flash the latest bootloader available for n910f .
Tsar3000 has recovery firmware for note 4 .
Search for "recovery firmware tsar3000 " on google.
In that file you will get a complete stock firmware (ap , bl , cp ,csc ,pit).
Download it and use the bootloader .
As far as i know , the flashing of those files on sd card , should be done via a functional
note 4 .
There is another method of creating debrick image , a tmobile user has already got one debrick image working .
Reporting via N910G
same problem bro, stuck at the t flash.
did anyone found a solution?
can we post a request to the guys that have a working N910F in the other threads (ROMS for example) so they make an image for our dead N910F.
Hey guys, i successfully created a Debrick.img for note 4 , used my own functional note 4 to create one .
http://forum.xda-developers.com/showthread.php?t=3488114
Don't forget to Press thanks .
Reporting Via N910G
Full Unbrick Solution N910F
Working solution: pastebin (dot) com/7KQxRRNF
^^ I'm not able to post outside links. So I had to improvise with pastebin.
Hello there can you help me
My device got hardbricked by accidentally flashing s4 firmware..
I made my sd card as a usb jig(created by win32 disk manager), thanks to XDA posts. Then I used odin to flash s3 firmware . Odin shows no any errors .after sucess flash mobile go upto samsung logo ,then it get struck & show a blue screen for a second then it goes restarting.
Plz help I even tried PIT partion procedure,Nand erase ,
Inserting a bootloader it always give me same result
And when I removed sd card it show black screen wont even on.if I insert sd card s3 will be alive again.
Hello Desham123
Will u plz provide complete info about ur device so I can help u.?
? Device: GTI9300I or GTI9301i
?Firmware downloading link ( you hv downloaded from )
?Have you used any custom recovery? Like TWRP or CWM or Philz?
?plz provide above information. It'll help me to short out ur problem. ☺
deshanm123 said:
Hello there can you help me
My device got hardbricked by accidentally flashing s4 firmware..
I made my sd card as a usb jig(created by win32 disk manager), thanks to XDA posts. Then I used odin to flash s3 firmware . Odin shows no any errors .after sucess flash mobile go upto samsung logo ,then it get struck & show a blue screen for a second then it goes restarting.
Plz help I even tried PIT partion procedure,Nand erase ,
Inserting a bootloader it always give me same result
And when I removed sd card it show black screen wont even on.if I insert sd card s3 will be alive again.
Click to expand...
Click to collapse
Hard bricked means a dead phone, so you will have to change the board.
Using the SDCard as a portable Nand isn't practical, you should replace the board eventually..
PankajRastogi said:
Will u plz provide complete info about ur device so I can help u.?
? Device: GTI9300I or GTI9301i
?Firmware downloading link ( you hv downloaded from )
?Have you used any custom recovery? Like TWRP or CWM or Philz?
?plz provide above information. It'll help me to short out ur problem. ☺
Click to expand...
Click to collapse
Sir your help will be appreciated.
I have downloaded them all for GTI9300I. But I donot know the correct procedure.
I created debrick disk image when I inserted that to phone it ill show samsung logo .then I do the wipe & factory rest .then I connect odin then I flash the rom.it get boot up to samsung logo it get restarted.
Also when I remove my sd card it will be dead again (no respond screen totally blacked ,couldnt do without sd card)
Please will you help me to correct me if im wrong .
is it wrong with sd card im using 2gb card which is not sandisk and not class 10
I have even pit file but donot know what to do
I do these above produres using stock recovery mode . I got twrp flash file also but I have no idea what to do
Please guide me & i will take total responsibility im tired of my s3
https://forum.xda-developers.com/galaxy-s3-neo/general/how-to-unbrick-t2911301 try this