Hi, I would like to talk in this thread about a new kind of head unit with MCU STM32.
Do you have ? How is working?
Personally I have bought two week ago and am using it from a week and is better than the px5 unit that I have to another car.
Is there something to do to root it ? And is there the possibility to have modded firmware as other px head unit?
following. i also need firmware for that same unit , mine got corrupt and now I dont have audio, boots to radio which does not tune, no sound . Can you get the firmware for this device for me from your device??
Hi, unfortunately I bought from bangood and I have not the firmware. I am looking for it too. I would like to root also.
If it's sound and tuner, are you sure that is a firmware problem and it is not hardware ? I suggest a return for warranty of unit is new.
Hi everyone! :fingers-crossed:
I have a 'blue aluminum' PX6 with STM32 arrived some days ago. From outside it looks just fine however when I started to test it thoroughly it was proved to be disappointing.
I attach software detail in a screenshot.
From software/OS point of view my unit is very unsophisticated.
- OS has been customized by the manufacturer, almost nothing like android 9 on a phone.
- 'Radio' is a startup app and cannot turn it off, very annoying for me.
- 'Settings' app is very customized with limited functionality, really basic.
- The system does some iteration of boot cycle sometimes, I have not yet figured out what is the trigger.
Personally, I would install a custom ROM such as for MTCD/MTCE variants as soon as I have it, sadly no ROM for STM32 variant yet.
I am very sad that such a "modern" hardware has such poor software.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ghino said:
Hi, unfortunately I bought from bangood and I have not the firmware. I am looking for it too. I would like to root also.
If it's sound and tuner, are you sure that is a firmware problem and it is not hardware ? I suggest a return for warranty of unit is new.
Click to expand...
Click to collapse
Hey,
I am also unskilled to extract the ROM from my unit (STM32).
I have seen a post on rooting this STM32 variant, you can try that.
Here is the link: https://forum.xda-developers.com/android-auto/android-head-units/rockchip-px6-mcu-stm32-t3976665/page5
Thank you for being active on this topic! :good:
HI! The root is work, but don't update th SU Binaries! My HU goes to bootloop after restart.
da012807 said:
HI! The root is work, but don't update th SU Binaries! My HU goes to bootloop after restart.
Click to expand...
Click to collapse
Oh, I am sorry to hear.
Does reset button help getting out the loop?
Thanks for the warning. :good:
No. The HU is in transit to Poland for warranty repair.
da012807 said:
No. The HU is in transit to Poland for warranty repair.
Click to expand...
Click to collapse
I hope it returns to you asap working better then ever before. By the way, how did you confirm that rooting was successful?
Hi! I ckecked with some apps they needs root acces.
Hi! I receive back the HU from Poland. It works well. Brand new Android 10. But the kernel version is 4.4.167+. I think, its only an Android 9 Pie.
Os version: KC1E0112-PA1-1.1.4.3.1 - BLINK161 - 20191129 - 701F
MCU version: STM32-20191028-11-KC6-41
da012807 said:
Hi! I receive back the HU from Poland. It works well. Brand new Android 10. But the kernel version is 4.4.167+. I think, its only an Android 9 Pie.
Os version: KC1E0112-PA1-1.1.4.3.1 - BLINK161 - 20191129 - 701F
MCU version: STM32-20191028-11-KC6-41
Click to expand...
Click to collapse
Great news!
You got a new MCU version also I guess.
Is that the 'general' blue aluminum version with plastic display you got?
I would be surprised if that is really Android 10, because my galaxy S10 just got update for Android 10 some days ago.
No. My HU from Aliexpress: https://www.aliexpress.com/item/32808121524.html?spm=a2g0s.9042311.0.0.66ca4c4do0qUhl
da012807 said:
No. My HU from Aliexpress: https://www.aliexpress.com/item/32808121524.html?spm=a2g0s.9042311.0.0.66ca4c4do0qUhl
Click to expand...
Click to collapse
Grats mate!
Hm..it looks not so cheap hardwarewise.
In an alternate universe where I have a car to fit this model I probably bought one too. :cyclops:
OperatorB said:
Grats mate!
Hm..it looks not so cheap hardwarewise.
In an alternate universe where I have a car to fit this model I probably bought one too. :cyclops:
Click to expand...
Click to collapse
Thx! I'm still waiting for rooting and hope to custom rom for this MCU
Anyone has an STM32 Android firmware in .img format? Needed badly
da012807 said:
Thx! I'm still waiting for rooting and hope to custom rom for this MCU
Click to expand...
Click to collapse
I have mine rooted... No problems with the firmware... Never got any errors or anything... Maybe I was lucky and they sent me one which was made with attention
pal.istvan2000 said:
I have mine rooted... No problems with the firmware... Never got any errors or anything... Maybe I was lucky and they sent me one which was made with attention
Click to expand...
Click to collapse
how did you root it?
.
rb1213 said:
how did you root it?
Click to expand...
Click to collapse
Uhmm... I just installed supersu and copied all files needed for root in their places... Reboot, Then busybox and there I have the root...
Related
Hey guys, I am really unsure where to ask or even if this is the forum to go to, but I've came across a few of these Chinese headunits online and they seem to be priced so well that I'd like to play around with it.
Example,
http://m.tomtop.com/7-inch-universa...-with-rear-view-camera-k3839.html?aid=CRM0223
This is a 7" double din unit that I'd like to see if it's possible to install some other kind of operating system other then what's preloaded on this.
A fellow forum member has purchased it and it looks like a decent unit that will match our older (2003) volkswagens interior.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does anybody know if it's possible to load up a different OS/Android onto these units? This one specifically is sold as Model 7018B
Thanks
It's definitely not running Android. Might be a WINCE unit, or proprietary. I very highly doubt you can load anything else onto it. If you do want an Android radio you have to be sure to search for "pure android car radio". Also suggest not getting a AN21-U unit and try for the units with a RK3188 processor and look over to the unit with the MTCB MCU. http://forum.xda-developers.com/android-auto/mtcb-android-head-unit-general
Bump
I wanna know also if someone found a way to install android on these
xuw said:
Bump
I wanna know also if someone found a way to install android on these
Click to expand...
Click to collapse
100% Impossible. Most of these run MIPS CPU's.
7018b vers. Nr.
If you have acces can you tell me the under setting/verso.info the 3 strings? I did a firmware update and can't nowhere find the right firmware i load one wrong and now is not working....
Pls help!!
Hi
I bought the same but i made a firmware update that i found and now nothing works! Do you have the original firmware?
basilkara said:
Hi
I bought the same but i made a firmware update that i found and now nothing works! Do you have the original firmware?
Click to expand...
Click to collapse
You need to open unit. There is board number written inside.
You need firmware for board version, not for the model. I installed firmware from gearbest and it bricked my unit (it was listed for model 7018b).
After few days searching i found out on other website about that.
It will be like this:
Model: 7018B
Board: 7022B-C500-V0.1
and then you can find firmware. Also you cant flash firmware through sdcard as there is no working firmware for that model.
You need to use CH431 programmer and flash directly eeprom chip.
7018b
Did you guy got any news about the firmware, I just did the same from that website
i have purchased same unit with ali express 2gb ram 32 gb internal memeory andorid... i can install all applications via playstores including sygic and google maps... is it not andorid ?
Hi! Is there any page you recommend that explains the proceadure? This just happens to mine and it says "No Signal". It doesn't read the sdcard any more.
Jordaliz09 said:
Hi! Is there any page you recommend that explains the proceadure? This just happens to mine and it says "No Signal". It doesn't read the sdcard any more.
Click to expand...
Click to collapse
I have a strange problem with this device.
All other phones got connected via bluetooth and play music fine.
Only Oneplus 7T when connected
music stutters.
Any workaround for it.
I have purchased a 7018B , 2GB , 16GB internal storage. It came with Oreo 8.1 installed and works great with Sygic GPS as well as Google Maps & Waze. I have also installed VLC for music playback. I have about 20GB music loaded onto a 32GB MicroSD. Great value - does all I want it to do.
jknightnz said:
I have purchased a 7018B , 2GB , 16GB internal storage. It came with Oreo 8.1 installed and works great with Sygic GPS as well as Google Maps & Waze. I have also installed VLC for music playback. I have about 20GB music loaded onto a 32GB MicroSD. Great value - does all I want it to do.
Click to expand...
Click to collapse
Are you a bot or are you paid to leave fake reviews?
I purchased a chinese head unit the other day with the Allwinner R16 A9 Cortex single din head unit currently I cant post links but I will add one later or pictures the best I can I have the model number
Hizpo
AD601UN7001
Not paying attention I downloaded and flashed the wrong file i thought I chose single din file but instead got the file for double din radio an now my screen shows nothing bu lines through it although everything else works fine radio and music apps i just cant see the screen or what I am selecting I have been looking for the stock/original flash files for this radio without any luck hoping i can recover it with a bootable disk option of some sort to reflash it any help would be much appreciated currently stuck with a very expensive brick
I believe 2din vs 1din does not make any difference in terms of ROM version, screen resolution does. Is there a chance you've downloaded wrong resolution ROM? If so, just download yours and reflash.
ste2002 said:
I believe 2din vs 1din does not make any difference in terms of ROM version, screen resolution does. Is there a chance you've downloaded wrong resolution ROM? If so, just download yours and reflash.
Click to expand...
Click to collapse
Long story short the file i ended up flashing i got off the russian forums because thats the only place i could find files for my specific unit but i didn't read the small print at the bottom that had files linked somewhere else and i wasnt suppose to do a certain update because it makes the screen stop working an I was originally trying to fix the battery threshold level to keep unit from restarting from acc to on position it took the update fine just when it restarted the unit the screen hasnt worked since so I've been trying to find a way to either make a auto update recovery disk of some sort or connect a pc to it through adb or something an anither thing to note is i have no back up or anything of my unit an its been a pain trying to find one i messaged the original seller to see if they could help me out an send me the stock files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The information on the unit comes back as a Allwinner T3-P3 single din 7 inch touch screen unit with android 6.0 R 16 A9 cortex processor the manufacturer goes by Hizpo
JBT1061 said:
I purchased a chinese head unit the other day with the Allwinner R16 A9 Cortex single din head unit currently I cant post links but I will add one later or pictures the best I can I have the model number
Hizpo
AD601UN7001
Not paying attention I downloaded and flashed the wrong file i thought I chose single din file but instead got the file for double din radio an now my screen shows nothing bu lines through it although everything else works fine radio and music apps i just cant see the screen or what I am selecting I have been looking for the stock/original flash files for this radio without any luck hoping i can recover it with a bootable disk option of some sort to reflash it any help would be much appreciated currently stuck with a very expensive brick
Click to expand...
Click to collapse
Do you have it figured out? I have the same unit and I´m struggling with bluetooth issues.
fstuff138 said:
Do you have it figured out? I have the same unit and I´m struggling with bluetooth issues.
Click to expand...
Click to collapse
No, but I still have the unit and to be honest they sent me another one and it still work i suppose i got break it out and get my tools out and dive in getting my hands dirty and try to extract the firmware file myself from the unit
Hello guys i just got this unit a month ago rk3399 px6 android 9, 4gb + 64gb with ips display. I realize this unit is quite hot after 15-30 minutes of running music or video. After looking at other people installing heatsink & fan, i start buying the tools i need ( drill, mini grinder, 4cm usb fan (i choose usb because i can unplug when i dont want to use it by opening my drawer), heatsink ( not yet arrive), and super glue.
I just finish install the fan and i was happy with the result. Before installing the fan the temperature is around 42-78 C and after installing the fan the temperature is around 32-52 C.
The hardest part is making a hole in this project
The only problem i find in this unit is the brightness, i have set it to the lowest number but at night it still too bright and hurt my eyes. If any of you have solution please share.
You guys can share knowledge in this thread about STM32.
Sorry for my bad english.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i Have a headunit like this exactly but with 32gig rom. did a factory reset now radio and audio nolonger work.can you help?
simbac said:
i Have a headunit like this exactly but with 32gig rom. did a factory reset now radio and audio nolonger work.can you help?
Click to expand...
Click to collapse
Have you try another factory reset, i did mine and the radio and audio still working.
trulu said:
Have you try another factory reset, i did mine and the radio and audio still working.
Click to expand...
Click to collapse
thanx for the reply I did it a couple of times but still nothing. I think maybe the device lost its factory settings. how do I enter the factory settings menu on this device? And where can I get the firmware for this device as well. Will you be able to make a dump of the software for me from your unit maybe it can work after reinstallation.
simbac said:
thanx for the reply I did it a couple of times but still nothing. I think maybe the device lost its factory settings. how do I enter the factory settings menu on this device? And where can I get the firmware for this device as well. Will you be able to make a dump of the software for me from your unit maybe it can work after reinstallation.
Click to expand...
Click to collapse
Sorry i cant help much, i dont know how to extract the firmware from my unit, have you contact the seller for help?
trulu said:
Sorry i cant help much, i dont know how to extract the firmware from my unit, have you contact the seller for help?
Click to expand...
Click to collapse
i did contact banggood thats where l bought it, the seller does not have the firmware. dont know how that could be possible
simbac said:
i did contact banggood thats where l bought it, the seller does not have the firmware. dont know how that could be possible
Click to expand...
Click to collapse
Since they are reseller, ask them to contact seller in china who help them selling the unit. Maybe they will help.
Hi, I have the same unit from bangood too. Is it possible to root? My rds radio show only station name and not the song name as other rds radio..can it be fixed? It is any possibility for a firmware as other PX6 unit?
ghino said:
Hi, I have the same unit from bangood too. Is it possible to root? My rds radio show only station name and not the song name as other rds radio..can it be fixed? It is any possibility for a firmware as other PX6 unit?
Click to expand...
Click to collapse
Sorry, i use spotify and music, dont know much bout the radio.
I dont think this unit can be root. Since no one support/help modified the firmware or software.
guys help me I need firmware and mcu for this device is corrupted. Banggod dont have the firmware of they just dont want to give me
This unit seems good to me. It is new so there are not firmware and mods but we need some a modder that looking to it. For firmware I think bangood is only a restseller would find the product or.
simbac said:
guys help me I need firmware and mcu for this device is corrupted. Banggod dont have the firmware of they just dont want to give me
Click to expand...
Click to collapse
II have a firmware from Erisin for this device. Unfortunately I can not set any links here.
I have a firmware zip for this unit, the update file is called 'os_update_KC1E0101-P01-1.1.4.3.1_20190819_182727.zip'
What would be the best way to post the zip?
hanspatt said:
II have a firmware from Erisin for this device. Unfortunately I can not set any links here.
Click to expand...
Click to collapse
Thanx for the reply can you use google drive and pm me or email the link to my email address [email protected]. thanx in advance
---------- Post added at 09:09 PM ---------- Previous post was at 09:08 PM ----------
mcrw27 said:
I have a firmware zip for this unit, the update file is called 'os_update_KC1E0101-P01-1.1.4.3.1_20190819_182727.zip'
What would be the best way to post the zip?
Click to expand...
Click to collapse
can you try google drive maybe and email me the link if possible. thanx in advance. my email is [email protected]
hello also I would need this firmware and mcu please where I can download it
[email protected]
mcrw27 said:
I have a firmware zip for this unit, the update file is called 'os_update_KC1E0101-P01-1.1.4.3.1_20190819_182727.zip'
What would be the best way to post the zip?
Click to expand...
Click to collapse
Any luck? I think your firmware is the right one for my device. please help
Hi, can you send link in pm,please?
mcrw27 he promised to lay out the firmware and disappeared somewhere.
mandarino22121958 said:
hello also I would need this firmware and mcu please where I can download it
[email protected]
Click to expand...
Click to collapse
i have send the link to you
really thanks thanks, now I have to figure out how to load it on the device because I currently have a blue screen.
do you have any idea how to do it?
Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks
jitenm said:
Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Could you detail brand and model and attach a photo of the unit?
ultradj83 said:
Could you detail brand and model and attach a photo of the unit?
Click to expand...
Click to collapse
Hi
I cannot post a link to the website yet but here are the specs on the site. It does not have a brand name on it.
From bidborbuy.co.za
VW 7" Android 8.1 Touch Screen Car Radio For VW Multimedia Player with GPS Navigation Bluetooth USB
Specifications:
Model: VW Player
Decoding Chip: MTK 8227L
Cpu: A7 1.3GHZx4
Size:7 Inch
Memory 1G Storage 16G
FM Radio:87.5~108MHz
Voltage:12V
Bluetooth: Bluetooth 4.0
USB: USB2.0
Audio Amplifier: TDA7388
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!
jitenm said:
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!
Click to expand...
Click to collapse
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Thanks! Will give this a try
I have a backup unit to install if i break this one so I will play around
Not MTCB.... Requesting Mod move
DIdn't work unfortunately.
I will need to find the chinese original k2001n_nwd firmware for this to get back to normal :laugh:
Will do some digging
Hi again
Managed to source the correct firmware from the russian forums.
The only issue I have is that the gain settings revert back to 0 when saving the config. I am trying to increase the bluetooth/usb volumes but it does not save the changes.
Anyone have a fix for this?
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
I can't acces to the link
Alessolabestia said:
I can't acces to the link
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Can give again the link for i try whit mine
Thanks
Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
ultradj83 said:
Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?
Click to expand...
Click to collapse
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
copas15 said:
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
Click to expand...
Click to collapse
Please send a picture and model specs as I'm not sure what mirror you have...
Greshare GS18950 DMSM5BE Android 8.1 DVR Mirror firmware, tools and bugs list
Hello there. This is the DMSM5BE: DMSM5BE_116_Media_Sleep_2020120715 firmware and tools attached. Known bugs: Wi-Fi off after reboot Bluetooth off after reboot CarKeeper app video streaming not working Park Monitor not working Awful UI...
forum.xda-developers.com
I need miudrive screen please
Hello , I also purchased the same.. with 1Gb ram. Is there any way to increase the RAM externally? I mean like using a class 10 memory card? Maybe its a dumb idea as I'm not a techie. I wanted to increase the RAm because Waze is not fluid smooth in the device. Thanks in advance
請問usb讀不到，要如何處理，謝謝！！
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Click to expand...
Click to collapse
Hello Cruizertz, I have the same device but 1g/16g
In the radio app can you save the stations and not delete them when you turn on the device again? This happened to me when the seller sent me a firmware to solve another problem and now it doesn't give me a solution and I don't know how to get everything right again since I didn't make a backup copy.
fraldide said:
Hello Cruizertz, I have the same device but 1g/16g
In the radio app can you save the stations and not delete them when you turn on the device again? This happened to me when the seller sent me a firmware to solve another problem and now it doesn't give me a solution and I don't know how to get everything right again since I didn't make a backup copy.
Click to expand...
Click to collapse
Do you need the last update yet?
Hello Cruizertz,
yes a need!! where can i get it?
fraldide said:
Hello Cruizertz,
yes a need!! where can i get it?
Click to expand...
Click to collapse
I think you ask to me for update and not to Cruizertz, really?
Sorry I got the name wrong!! if it's you
Яндекс
Найдётся всё
disk.yandex.ru
First unzip the folder, and just copy the Update folder (inside there are more folders, don't touch). Second, put the Update folder on a flash drive and insert it into the USB² (you have two USB ports on the headunit, must be with the number USB².
Third: the system asks you if you want to update, you must give OK or wait 5 seconds. The copy of the files will begin, do not touch anything, and you will see how the lights blink
Fourth: do not touch anything, when the update is done the unit will turn off, and when it turns on again the lights will continue to flash, and after about 30 to 60 seconds it will start updating again. Never remove the flash drive or touch anything until the message appears at the bottom indicating that the update has finished.
When you're done, tap ok. Everything has been deleted from the headunit, and you must reinstall everything you had before.
Important: if you had the Apps from a vendor, such as Podofo or Jancar, they are deleted. If you had any map App too, but if you need Here Maps tell me.
If you are not sure what I explain, if you can wait, maybe 3 hours, I can do a video to show you
meidland said:
If you are not sure what I explain, if you can wait, maybe 3 hours, I can do a video to show you
Click to expand...
Click to collapse
Perfecto meidland, I think it's pretty clear what the process is like. I don't think I can try it today, but tomorrow I will. thanks. I'll tell you when I do.
fraldide said:
Perfecto meidland, I think it's pretty clear what the process is like. I don't think I can try it today, but tomorrow I will. thanks. I'll tell you when I do.
Click to expand...
Click to collapse
It's very easy, you will see. I forgot to tell you that is the last update at the moment, from 14.10.2022 or 10.14.2022 in English, I think
Thank you very much for your help meidland. I was able to search for a moment and have installed it and everything is working perfectly. It has corrected a problem that I had with the radio app, after a firmware that the seller had sent me to correct something else and then did not want to know anything. That's why I thank you, for helping me.
Greetings
Meidland please do a video to show the update process
meidland said:
Яндекс
Найдётся всё
disk.yandex.ru
First unzip the folder, and just copy the Update folder (inside there are more folders, don't touch). Second, put the Update folder on a flash drive and insert it into the USB² (you have two USB ports on the headunit, must be with the number USB².
Third: the system asks you if you want to update, you must give OK or wait 5 seconds. The copy of the files will begin, do not touch anything, and you will see how the lights blink
Fourth: do not touch anything, when the update is done the unit will turn off, and when it turns on again the lights will continue to flash, and after about 30 to 60 seconds it will start updating again. Never remove the flash drive or touch anything until the message appears at the bottom indicating that the update has finished.
When you're done, tap ok. Everything has been deleted from the headunit, and you must reinstall everything you had before.
Important: if you had the Apps from a vendor, such as Podofo or Jancar, they are deleted. If you had any map App too, but if you need Here Maps tell me.
Click to expand...
Click to collapse
Please link not work ...
Hi, after I update with the update from 10/14/22 was not a good update and I report to Factory and the said is better the update from 07/08/22 , I tried and is the best at the moment.
Link here
Firmware11-1024x600-220708-1241AutoUpdate.zip
drive.google.com
meidland said:
Hi, after I update with the update from 10/14/22 was not a good update and I report to Factory and the said is better the update from 07/08/22 , I tried and is the best at the moment.
Link here
Firmware11-1024x600-220708-1241AutoUpdate.zip
drive.google.com
Click to expand...
Click to collapse
the official Podofo seller I bought the head unit from, sent me this link to my own 2gb/32gb unit... i'll try next day
Яндекс
Найдётся всё
disk.yandex.ru
I click on restore factory settings, and now, the radio is starting ... And not work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
isbsalgado88 said:
I click on restore factory settings, and now, the radio is starting ... And not work.
Click to expand...
Click to collapse
RonaldoRisso said:
the official Podofo seller I bought the head unit from, sent me this link to my own 2gb/32gb unit... i'll try next day
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
Update is ok, thanks so much
Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Click to expand...
Click to collapse
can i install yt9213 or yt9216?
Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
Click to expand...
Click to collapse
I have the same unit 1gb 16gb my firmware has corrupted. Kindly help post a link where i can download and reinstall?