AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Click to expand...
Click to collapse
Hello Cruizertz, I have the same device but 1g/16g
In the radio app can you save the stations and not delete them when you turn on the device again? This happened to me when the seller sent me a firmware to solve another problem and now it doesn't give me a solution and I don't know how to get everything right again since I didn't make a backup copy.
fraldide said:
Hello Cruizertz, I have the same device but 1g/16g
In the radio app can you save the stations and not delete them when you turn on the device again? This happened to me when the seller sent me a firmware to solve another problem and now it doesn't give me a solution and I don't know how to get everything right again since I didn't make a backup copy.
Click to expand...
Click to collapse
Do you need the last update yet?
Hello Cruizertz,
yes a need!! where can i get it?
fraldide said:
Hello Cruizertz,
yes a need!! where can i get it?
Click to expand...
Click to collapse
I think you ask to me for update and not to Cruizertz, really?
Sorry I got the name wrong!! if it's you
Яндекс
Найдётся всё
disk.yandex.ru
First unzip the folder, and just copy the Update folder (inside there are more folders, don't touch). Second, put the Update folder on a flash drive and insert it into the USB² (you have two USB ports on the headunit, must be with the number USB².
Third: the system asks you if you want to update, you must give OK or wait 5 seconds. The copy of the files will begin, do not touch anything, and you will see how the lights blink
Fourth: do not touch anything, when the update is done the unit will turn off, and when it turns on again the lights will continue to flash, and after about 30 to 60 seconds it will start updating again. Never remove the flash drive or touch anything until the message appears at the bottom indicating that the update has finished.
When you're done, tap ok. Everything has been deleted from the headunit, and you must reinstall everything you had before.
Important: if you had the Apps from a vendor, such as Podofo or Jancar, they are deleted. If you had any map App too, but if you need Here Maps tell me.
If you are not sure what I explain, if you can wait, maybe 3 hours, I can do a video to show you
meidland said:
If you are not sure what I explain, if you can wait, maybe 3 hours, I can do a video to show you
Click to expand...
Click to collapse
Perfecto meidland, I think it's pretty clear what the process is like. I don't think I can try it today, but tomorrow I will. thanks. I'll tell you when I do.
fraldide said:
Perfecto meidland, I think it's pretty clear what the process is like. I don't think I can try it today, but tomorrow I will. thanks. I'll tell you when I do.
Click to expand...
Click to collapse
It's very easy, you will see. I forgot to tell you that is the last update at the moment, from 14.10.2022 or 10.14.2022 in English, I think
Thank you very much for your help meidland. I was able to search for a moment and have installed it and everything is working perfectly. It has corrected a problem that I had with the radio app, after a firmware that the seller had sent me to correct something else and then did not want to know anything. That's why I thank you, for helping me.
Greetings
Meidland please do a video to show the update process
meidland said:
Яндекс
Найдётся всё
disk.yandex.ru
First unzip the folder, and just copy the Update folder (inside there are more folders, don't touch). Second, put the Update folder on a flash drive and insert it into the USB² (you have two USB ports on the headunit, must be with the number USB².
Third: the system asks you if you want to update, you must give OK or wait 5 seconds. The copy of the files will begin, do not touch anything, and you will see how the lights blink
Fourth: do not touch anything, when the update is done the unit will turn off, and when it turns on again the lights will continue to flash, and after about 30 to 60 seconds it will start updating again. Never remove the flash drive or touch anything until the message appears at the bottom indicating that the update has finished.
When you're done, tap ok. Everything has been deleted from the headunit, and you must reinstall everything you had before.
Important: if you had the Apps from a vendor, such as Podofo or Jancar, they are deleted. If you had any map App too, but if you need Here Maps tell me.
Click to expand...
Click to collapse
Please link not work ...
Hi, after I update with the update from 10/14/22 was not a good update and I report to Factory and the said is better the update from 07/08/22 , I tried and is the best at the moment.
Link here
Firmware11-1024x600-220708-1241AutoUpdate.zip
drive.google.com
meidland said:
Hi, after I update with the update from 10/14/22 was not a good update and I report to Factory and the said is better the update from 07/08/22 , I tried and is the best at the moment.
Link here
Firmware11-1024x600-220708-1241AutoUpdate.zip
drive.google.com
Click to expand...
Click to collapse
the official Podofo seller I bought the head unit from, sent me this link to my own 2gb/32gb unit... i'll try next day
Яндекс
Найдётся всё
disk.yandex.ru
I click on restore factory settings, and now, the radio is starting ... And not work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
isbsalgado88 said:
I click on restore factory settings, and now, the radio is starting ... And not work.
Click to expand...
Click to collapse
RonaldoRisso said:
the official Podofo seller I bought the head unit from, sent me this link to my own 2gb/32gb unit... i'll try next day
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
Update is ok, thanks so much
Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
What can i change on this system of mine, any upgrades supported on this unit??
Click to expand...
Click to collapse
can i install yt9213 or yt9216?
Cruizertz said:
AC8227L Android head unit 2gb/32gb
Sound Processor TM2313
MCU version jcnu20-0-2022.04.21_09:45
Panel Info MIPI_1024x600-2021/7/7 21:10:55
System Version: JCAC10003-OC2-V1.0.20R2-220509_1437-AA
Click to expand...
Click to collapse
I have the same unit 1gb 16gb my firmware has corrupted. Kindly help post a link where i can download and reinstall?
Related
Hi
I've update the MCU and after that I got 2 problems:
1) Radio not working at all ( try to change setting from Factory Settings and still not working).
2) AVIN ( the front camera ) it's work sometimes BUT mostly not working.
I've tried the following:
1) Go throw the settings and Factory settings make settings like original.
2) GO throw settings and Factory settings and try everything.
3) Change the MCU version ( until now I tried 8 files).
4) Flash the MCU and Flash the Rome ( also Conversely).
* I have chose the MCU file carefully based on the HU that I have.
Here is the link of the MCU that match the one that I have:
KLD MCU
Head Unit
Here is my ORIGINAL head unit info ( BEFORE UPDATES ):
MCU Version: MTCB-KLD1-V2.55
Android Version: 4.4.4_28052015
Kernel Version: 3.0.36+ [email protected] #262
Build Number: rk3188-eng4.4.4 28052015
I tried to search in this section looking for any solution but I got no luck
thanks
Same thing happened to me last night. Any solutions out there? My head unit is an Eonon GA5150F and I installed Mayalsks August ROM and the latest KLD mcu
rooot_999 said:
* I have chose the MCU file carefully based on the HU that I have.
Here is the link of the MCU that match the one that I have:
KLD MCU
Click to expand...
Click to collapse
Except that link points to 21 folders with MCU files in them. MOST of them are KLD, only a few are KLD1, which is what you have. Did you try the KLD1 MCU? And why are you shouting?
Well I tried KLD1, and it's the same.
I think we need the stock one.
By the way I figured how to run AVIN, you can do it through the steering wheel buttons(Mode) , this method works always, but still we need to run it through the screen.
For the radio issue I couldn't solve it until now.
I think we need to ask Eonon company to gives us the stock files.
Sent from my C6602 using XDA Free mobile app
Hello,
I have a problem with the radio too. I cant autosearch on the radio. If I put the frequency manually it works. But autosearch doesnt. Any idea? Trying to change in factory settings the type of radio but no change.
I have KDL2 v.267 from the factory, not done any update by me.
vlad_pelinescu said:
Hello,
I have a problem with the radio too. I cant autosearch on the radio. If I put the frequency manually it works. But autosearch doesnt. Any idea? Trying to change in factory settings the type of radio but no change.
I have KDL2 v.267 from the factory, not done any update by me.
Click to expand...
Click to collapse
Hi, this problem happened after update wrong MCU
Thanks for your answer. My MCU was never updated. So probably they (chinese) did it at the factory and put a bad MCU update? So you think i should downgrade to an older version. (kdl2 v2.67 is the newest version). I will try with KDL2 v2.55 an see if it works.
Sry for another of my post. I've tried a downgrade to kDL2 v2.55.Same problem. I've tried KDL 2.64. Same problem. But everything works on KDL and on KDL2 mcu update. Just the radio is not working.
vlad_pelinescu said:
Sry for another of my post. I've tried a downgrade to kDL2 v2.55.Same problem. I've tried KDL 2.64. Same problem. But everything works on KDL and on KDL2 mcu update. Just the radio is not working.
Click to expand...
Click to collapse
Ever get your radio working ?
chgogolfpro said:
Ever get your radio working ?
Click to expand...
Click to collapse
Yep. With the Mayalsks rom it works like charm. After installing Maya's ROM the radio start working.
radio fix
vlad_pelinescu said:
Yep. With the Mayalsks rom it works like charm. After installing Maya's ROM the radio start working.
Click to expand...
Click to collapse
I had this same problem. Reloaded the factor rom setting so i was back to the way it was when i bought it and still no radio. turns out it was a setting under factory settings. my pin to get abscesses was 121212 not 126 like the manual said. i had to select TDA7786 and do a factory reset and it worked fine. i have a pic but not sure how to add it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for bumping this but I really don't know what to do.
I have a MTCD XRC which have worked somewhat well but now the radio is totally dead. I can't auto search channels, there is no radio noice or nothing. Audio works otherwise but the radio is totally gone.
I tried to do a factory reset, no change.
I went to factory settings to see what radio was selected like the photo above but I only have "YES" and "NO" to select, nothing else!
Anybody? Please?
Edit: It just died while listening to the radio in the middle of a song, it just went quiet and I have not been able to get it working again after that :/
Have you tried to upgrade the MCU?
also which room are you using? Is it stock?
rooot_999 said:
Have you tried to upgrade the MCU?
also which room are you using? Is it stock?
Click to expand...
Click to collapse
Yes I upgraded to the latest MCU for my model (XRC) and installed Maylask latest rom then the radio just went quiet and auto search not working. I then tried to change back both rom and MCU to stock, but still not working
I tried the above in factory settings but the only options I have under radio is "YES" and "NO". I can not select radio chip
I have the same issue. The 121212 (and m123456) codes work for getting to "factory settings" but on the Radio menu there's just YES/NO and no way to select a tuner chip. Anyone have any ideas? This is on a PX3 2GB Android 7.1.2 headunit.
Update: Switched to the Mayalsks ROM but that didn't help. I was hoping I would get to choose a radio module but it is still just YES/NO.
nirudha said:
I have the same issue. The 121212 (and m123456) codes work for getting to "factory settings" but on the Radio menu there's just YES/NO and no way to select a tuner chip. Anyone have any ideas? This is on a PX3 2GB Android 7.1.2 headunit.
Update: Switched to the Mayalsks ROM but that didn't help. I was hoping I would get to choose a radio module but it is still just YES/NO.
Click to expand...
Click to collapse
Any update on that one??
Hello guys i just got this unit a month ago rk3399 px6 android 9, 4gb + 64gb with ips display. I realize this unit is quite hot after 15-30 minutes of running music or video. After looking at other people installing heatsink & fan, i start buying the tools i need ( drill, mini grinder, 4cm usb fan (i choose usb because i can unplug when i dont want to use it by opening my drawer), heatsink ( not yet arrive), and super glue.
I just finish install the fan and i was happy with the result. Before installing the fan the temperature is around 42-78 C and after installing the fan the temperature is around 32-52 C.
The hardest part is making a hole in this project
The only problem i find in this unit is the brightness, i have set it to the lowest number but at night it still too bright and hurt my eyes. If any of you have solution please share.
You guys can share knowledge in this thread about STM32.
Sorry for my bad english.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i Have a headunit like this exactly but with 32gig rom. did a factory reset now radio and audio nolonger work.can you help?
simbac said:
i Have a headunit like this exactly but with 32gig rom. did a factory reset now radio and audio nolonger work.can you help?
Click to expand...
Click to collapse
Have you try another factory reset, i did mine and the radio and audio still working.
trulu said:
Have you try another factory reset, i did mine and the radio and audio still working.
Click to expand...
Click to collapse
thanx for the reply I did it a couple of times but still nothing. I think maybe the device lost its factory settings. how do I enter the factory settings menu on this device? And where can I get the firmware for this device as well. Will you be able to make a dump of the software for me from your unit maybe it can work after reinstallation.
simbac said:
thanx for the reply I did it a couple of times but still nothing. I think maybe the device lost its factory settings. how do I enter the factory settings menu on this device? And where can I get the firmware for this device as well. Will you be able to make a dump of the software for me from your unit maybe it can work after reinstallation.
Click to expand...
Click to collapse
Sorry i cant help much, i dont know how to extract the firmware from my unit, have you contact the seller for help?
trulu said:
Sorry i cant help much, i dont know how to extract the firmware from my unit, have you contact the seller for help?
Click to expand...
Click to collapse
i did contact banggood thats where l bought it, the seller does not have the firmware. dont know how that could be possible
simbac said:
i did contact banggood thats where l bought it, the seller does not have the firmware. dont know how that could be possible
Click to expand...
Click to collapse
Since they are reseller, ask them to contact seller in china who help them selling the unit. Maybe they will help.
Hi, I have the same unit from bangood too. Is it possible to root? My rds radio show only station name and not the song name as other rds radio..can it be fixed? It is any possibility for a firmware as other PX6 unit?
ghino said:
Hi, I have the same unit from bangood too. Is it possible to root? My rds radio show only station name and not the song name as other rds radio..can it be fixed? It is any possibility for a firmware as other PX6 unit?
Click to expand...
Click to collapse
Sorry, i use spotify and music, dont know much bout the radio.
I dont think this unit can be root. Since no one support/help modified the firmware or software.
guys help me I need firmware and mcu for this device is corrupted. Banggod dont have the firmware of they just dont want to give me
This unit seems good to me. It is new so there are not firmware and mods but we need some a modder that looking to it. For firmware I think bangood is only a restseller would find the product or.
simbac said:
guys help me I need firmware and mcu for this device is corrupted. Banggod dont have the firmware of they just dont want to give me
Click to expand...
Click to collapse
II have a firmware from Erisin for this device. Unfortunately I can not set any links here.
I have a firmware zip for this unit, the update file is called 'os_update_KC1E0101-P01-1.1.4.3.1_20190819_182727.zip'
What would be the best way to post the zip?
hanspatt said:
II have a firmware from Erisin for this device. Unfortunately I can not set any links here.
Click to expand...
Click to collapse
Thanx for the reply can you use google drive and pm me or email the link to my email address [email protected]. thanx in advance
---------- Post added at 09:09 PM ---------- Previous post was at 09:08 PM ----------
mcrw27 said:
I have a firmware zip for this unit, the update file is called 'os_update_KC1E0101-P01-1.1.4.3.1_20190819_182727.zip'
What would be the best way to post the zip?
Click to expand...
Click to collapse
can you try google drive maybe and email me the link if possible. thanx in advance. my email is [email protected]
hello also I would need this firmware and mcu please where I can download it
[email protected]
mcrw27 said:
I have a firmware zip for this unit, the update file is called 'os_update_KC1E0101-P01-1.1.4.3.1_20190819_182727.zip'
What would be the best way to post the zip?
Click to expand...
Click to collapse
Any luck? I think your firmware is the right one for my device. please help
Hi, can you send link in pm,please?
mcrw27 he promised to lay out the firmware and disappeared somewhere.
mandarino22121958 said:
hello also I would need this firmware and mcu please where I can download it
[email protected]
Click to expand...
Click to collapse
i have send the link to you
really thanks thanks, now I have to figure out how to load it on the device because I currently have a blue screen.
do you have any idea how to do it?
Hi, I would like to talk in this thread about a new kind of head unit with MCU STM32.
Do you have ? How is working?
Personally I have bought two week ago and am using it from a week and is better than the px5 unit that I have to another car.
Is there something to do to root it ? And is there the possibility to have modded firmware as other px head unit?
following. i also need firmware for that same unit , mine got corrupt and now I dont have audio, boots to radio which does not tune, no sound . Can you get the firmware for this device for me from your device??
Hi, unfortunately I bought from bangood and I have not the firmware. I am looking for it too. I would like to root also.
If it's sound and tuner, are you sure that is a firmware problem and it is not hardware ? I suggest a return for warranty of unit is new.
Hi everyone! :fingers-crossed:
I have a 'blue aluminum' PX6 with STM32 arrived some days ago. From outside it looks just fine however when I started to test it thoroughly it was proved to be disappointing.
I attach software detail in a screenshot.
From software/OS point of view my unit is very unsophisticated.
- OS has been customized by the manufacturer, almost nothing like android 9 on a phone.
- 'Radio' is a startup app and cannot turn it off, very annoying for me.
- 'Settings' app is very customized with limited functionality, really basic.
- The system does some iteration of boot cycle sometimes, I have not yet figured out what is the trigger.
Personally, I would install a custom ROM such as for MTCD/MTCE variants as soon as I have it, sadly no ROM for STM32 variant yet.
I am very sad that such a "modern" hardware has such poor software.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ghino said:
Hi, unfortunately I bought from bangood and I have not the firmware. I am looking for it too. I would like to root also.
If it's sound and tuner, are you sure that is a firmware problem and it is not hardware ? I suggest a return for warranty of unit is new.
Click to expand...
Click to collapse
Hey,
I am also unskilled to extract the ROM from my unit (STM32).
I have seen a post on rooting this STM32 variant, you can try that.
Here is the link: https://forum.xda-developers.com/android-auto/android-head-units/rockchip-px6-mcu-stm32-t3976665/page5
Thank you for being active on this topic! :good:
HI! The root is work, but don't update th SU Binaries! My HU goes to bootloop after restart.
da012807 said:
HI! The root is work, but don't update th SU Binaries! My HU goes to bootloop after restart.
Click to expand...
Click to collapse
Oh, I am sorry to hear.
Does reset button help getting out the loop?
Thanks for the warning. :good:
No. The HU is in transit to Poland for warranty repair.
da012807 said:
No. The HU is in transit to Poland for warranty repair.
Click to expand...
Click to collapse
I hope it returns to you asap working better then ever before. By the way, how did you confirm that rooting was successful?
Hi! I ckecked with some apps they needs root acces.
Hi! I receive back the HU from Poland. It works well. Brand new Android 10. But the kernel version is 4.4.167+. I think, its only an Android 9 Pie.
Os version: KC1E0112-PA1-1.1.4.3.1 - BLINK161 - 20191129 - 701F
MCU version: STM32-20191028-11-KC6-41
da012807 said:
Hi! I receive back the HU from Poland. It works well. Brand new Android 10. But the kernel version is 4.4.167+. I think, its only an Android 9 Pie.
Os version: KC1E0112-PA1-1.1.4.3.1 - BLINK161 - 20191129 - 701F
MCU version: STM32-20191028-11-KC6-41
Click to expand...
Click to collapse
Great news!
You got a new MCU version also I guess.
Is that the 'general' blue aluminum version with plastic display you got?
I would be surprised if that is really Android 10, because my galaxy S10 just got update for Android 10 some days ago.
No. My HU from Aliexpress: https://www.aliexpress.com/item/32808121524.html?spm=a2g0s.9042311.0.0.66ca4c4do0qUhl
da012807 said:
No. My HU from Aliexpress: https://www.aliexpress.com/item/32808121524.html?spm=a2g0s.9042311.0.0.66ca4c4do0qUhl
Click to expand...
Click to collapse
Grats mate!
Hm..it looks not so cheap hardwarewise.
In an alternate universe where I have a car to fit this model I probably bought one too. :cyclops:
OperatorB said:
Grats mate!
Hm..it looks not so cheap hardwarewise.
In an alternate universe where I have a car to fit this model I probably bought one too. :cyclops:
Click to expand...
Click to collapse
Thx! I'm still waiting for rooting and hope to custom rom for this MCU
Anyone has an STM32 Android firmware in .img format? Needed badly
da012807 said:
Thx! I'm still waiting for rooting and hope to custom rom for this MCU
Click to expand...
Click to collapse
I have mine rooted... No problems with the firmware... Never got any errors or anything... Maybe I was lucky and they sent me one which was made with attention
pal.istvan2000 said:
I have mine rooted... No problems with the firmware... Never got any errors or anything... Maybe I was lucky and they sent me one which was made with attention
Click to expand...
Click to collapse
how did you root it?
.
rb1213 said:
how did you root it?
Click to expand...
Click to collapse
Uhmm... I just installed supersu and copied all files needed for root in their places... Reboot, Then busybox and there I have the root...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hello I have new firmware for car radio from ullgo if anyone need to download
This Firmware for
Autor: Tcx
Date: 2019-09-04 Notice:
1. Update the system and add AutoPlay function Autor: Tcx
Date: 2019-08-19 Notice:
1. Update the system, compatible with 1280x720 UI 2. Update the TW service, and the MCU will judge the current DSP
V9.3.1_20180809.134925_CLC1-FD-DSP {BJC
Update to DSP}
https://drive.google.com/file/d/1fJbhrJBpNQUi4zH0KRdSklViBRcbcbxB/view?usp=sharing
Hi, is it compatible with below:
I have this one
I contacted the seller and sent me the firmware
Hi , thanks for the link ?, any instruction how to do the update? Copy to USB drive and the unit will auto detect ?
please download and unzip it on your computer without folder and copy the files you get directly to root of your usb flash
[email protected] said:
View attachment 4973225
please download and unzip it on your computer without folder and copy the files you get directly to root of your usb flash
Click to expand...
Click to collapse
Hi. Do you know android os version?
andason said:
Hi. Do you know android os version?
Click to expand...
Click to collapse
Android 8.1
Can someone help me connect android auto to ts9-sp9853i head unit. My phone is note 8, I can't even use mirror link at all. How do you guys connect your phone with this unit? Thanks
Sent from my SM-N950W using Tapatalk
jeffrox82 said:
Can someone help me connect android auto to ts9-sp9853i head unit. My phone is note 8, I can't even use mirror link at all. How do you guys connect your phone with this unit? Thanks
Sent from my SM-N950W using Tapatalk
Click to expand...
Click to collapse
You need to install Headunit Reloaded Emulator to connect androidauto
Yes I just did and it worked! Emil was the author of the program was really helpful!
Sent from my SM-N950W using Tapatalk
Anyone know why i get an error message as it tries to update?
xnrxjose said:
Anyone know why i get an error message as it tries to update?
Click to expand...
Click to collapse
can you send photo from erro
Iraqmix68 said:
can you send photo from erro
Click to expand...
Click to collapse
xnrxjose said:
Click to expand...
Click to collapse
Did you have the same version what i have
Iraqmix68 said:
View attachment 5148753
Did you have the same version what i have
Click to expand...
Click to collapse
xnrxjose said:
View attachment 5148757
Click to expand...
Click to collapse
You have Seicane Model H656N I think this software does not fit your head unit
Iraqmix68 said:
You have Seicane Model H656N I think this software does not fit your head unit
Click to expand...
Click to collapse
Ooh thought android update would have been universal. Since its same model #
Do you know which one i need?
xnrxjose said:
Ooh thought android update would have been universal. Since its same model #
Do you know which one i need?
Click to expand...
Click to collapse
I think you can find your software at the Russian forum https://4pda.ru/forum/index.php?showtopic=939604
Iraqmix68 said:
I think you can find your software at the Russian forum https://4pda.ru/forum/index.php?showtopic=939604
Click to expand...
Click to collapse
Awesome man thanks
[email protected] said:
hello I have new firmware for car radio from ullgo if anyone need to download
This Firmware for
Autor: Tcx
Date: 2019-09-04 Notice:
1. Update the system and add AutoPlay function Autor: Tcx
Date: 2019-08-19 Notice:
1. Update the system, compatible with 1280x720 UI 2. Update the TW service, and the MCU will judge the current DSP
V9.3.1_20180809.134925_CLC1-FD-DSP {BJC
Update to DSP}
https://drive.google.com/file/d/1fJbhrJBpNQUi4zH0KRdSklViBRcbcbxB/view?usp=sharing
Click to expand...
Click to collapse
Hello good day!!
This firmware does not work for me, I decompress it in the root of the Flashdrive and also put the compressed file, but since the system update it does not show me anything, as if there were no Flashdrive. Comparing with other firmwares that I have found searching the internet, this one seems to be missing files so it does not detect it. Putting other firmwares in the Flashdrive unit if it detects them and lets me update, but not with this one.
Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks
jitenm said:
Hi Everyone
Recently purchased a unit with the below specs:
APPVER: K2001N_NWD_S212701.20191226.212334.01
PlatformVER: K20N-2019/12/26
MCUVER: V3.0-FF01-20190909-A02-CAN0000-00-00-DVD0000000000-00
BTVER: GOC_XR829_4.0/2019/10/24
CANAPPVER: v19.12.23A
CANBOXVER: raise
I have 2 questions:
1. Where can I find firmware for this unit?
2. The "factory settings" menu seems to have an issue on "Gain Settings". I make changes to the gain on the ports but when it reboots it goes back to 0.
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Could you detail brand and model and attach a photo of the unit?
ultradj83 said:
Could you detail brand and model and attach a photo of the unit?
Click to expand...
Click to collapse
Hi
I cannot post a link to the website yet but here are the specs on the site. It does not have a brand name on it.
From bidborbuy.co.za
VW 7" Android 8.1 Touch Screen Car Radio For VW Multimedia Player with GPS Navigation Bluetooth USB
Specifications:
Model: VW Player
Decoding Chip: MTK 8227L
Cpu: A7 1.3GHZx4
Size:7 Inch
Memory 1G Storage 16G
FM Radio:87.5~108MHz
Voltage:12V
Bluetooth: Bluetooth 4.0
USB: USB2.0
Audio Amplifier: TDA7388
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!
jitenm said:
Please send me the link, I was not concentrating and loaded a Russian version this afternoon :laugh:
Trying to find the original version but not winning, I would appreciate the link.
Thanks!
Click to expand...
Click to collapse
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
ultradj83 said:
Hardware is really similar to my unit, both based on 8227L and TDA7388.
I can send the firmware I'm running to you, but no idea if it will run, it might brick your unit.
It works quite fine, but there's 2 problems:
1. Sometimes GPS is slow to fix.
2. On incoming calls it takes up to 10 seconds to start incoming voice, while outgoing voice starts immediately.
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Thanks! Will give this a try
I have a backup unit to install if i break this one so I will play around
Not MTCB.... Requesting Mod move
DIdn't work unfortunately.
I will need to find the chinese original k2001n_nwd firmware for this to get back to normal :laugh:
Will do some digging
Hi again
Managed to source the correct firmware from the russian forums.
The only issue I have is that the gain settings revert back to 0 when saving the config. I am trying to increase the bluetooth/usb volumes but it does not save the changes.
Anyone have a fix for this?
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
I can't acces to the link
Alessolabestia said:
I can't acces to the link
Click to expand...
Click to collapse
ultradj83 said:
Here it is: https://we.tl/t-VvRCthiTed
Mind that you may brick your unit: normally there should be a CRC and model check before flash begins, but talking about chinese stuff nothing is safe...
Click to expand...
Click to collapse
Can give again the link for i try whit mine
Thanks
Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
ultradj83 said:
Dear,
as a long time has passed I don't remember exactly what file I shared through that link...
What's your modem (a pic might be useful)?
What's your problem?
Click to expand...
Click to collapse
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
copas15 said:
i brick my unit and i need image for allwinner t3 k2001 i thinks is ( t3-p2 )
Click to expand...
Click to collapse
Please send a picture and model specs as I'm not sure what mirror you have...
Greshare GS18950 DMSM5BE Android 8.1 DVR Mirror firmware, tools and bugs list
Hello there. This is the DMSM5BE: DMSM5BE_116_Media_Sleep_2020120715 firmware and tools attached. Known bugs: Wi-Fi off after reboot Bluetooth off after reboot CarKeeper app video streaming not working Park Monitor not working Awful UI...
forum.xda-developers.com
I need miudrive screen please
Hello , I also purchased the same.. with 1Gb ram. Is there any way to increase the RAM externally? I mean like using a class 10 memory card? Maybe its a dumb idea as I'm not a techie. I wanted to increase the RAm because Waze is not fluid smooth in the device. Thanks in advance
請問usb讀不到，要如何處理，謝謝！！
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}