error flashing firmware.
system.img.ext4 FAIL! (Write)
how can i fix this ?
Related
good day ,
anyone can help me with installing stock version of android 4.3 version on my GS4 ?! i have problem while using odin v3.09 to flash my Galaxy s4 i9505 to stock firmware version 4.3 with the md5 file downloaded from sammobile.com , here is some info about my phone :
having CWM recovery installed
running on custom ROM CM11 4.4.4
error message in odin is as below :
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
micphone7 said:
good day ,
anyone can help me with installing stock version of android 4.3 version on my GS4 ?! i have problem while using odin v3.09 to flash my Galaxy s4 i9505 to stock firmware version 4.3 with the md5 file downloaded from sammobile.com , here is some info about my phone :
having CWM recovery installed
running on custom ROM CM11 4.4.4
error message in odin is as below :
Odin v.3 engine (ID:5)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sbl1.mbn
NAND Write Start!!
sbl2.mbn
sbl3.mbn
rpm.mbn
aboot.mbn
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Download the official firmware of your country and carrier from samobile.Com and flash with odin
This will flash stock firmware and stock recovery
Sent from my GT-I9505 using Tapatalk
1eyedmonster said:
Download the official firmware of your country and carrier from samobile.Com and flash with odin
This will flash stock firmware and stock recovery
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I just bought it from thailand !
micphone7 said:
I just bought it from thailand !
Click to expand...
Click to collapse
You wont be able to flash 4.3 if youre on 4.4.2
"If someone helps, never forget to hit thanks ? "
Hey guys. I tried to install the N910CXXU1BOC5 firmware on my Note 4 and this is what I get in Odin :
...
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
For the first time ever I can't flash with odin. What should I do ? I tried both 3.04 and 3.10.6 versions of Odin and both return "FAIL" as result and now I can't use my phone. Please help
GeorgEveS said:
Hey guys. I tried to install the N910CXXU1BOC5 firmware on my Note 4 and this is what I get in Odin :
...
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
For the first time ever I can't flash with odin. What should I do ? I tried both 3.04 and 3.10.6 versions of Odin and both return "FAIL" as result and now I can't use my phone. Please help
Click to expand...
Click to collapse
make sure you follow all the steps, remember you have to unzip the file you downloaded then you will be able to flash it via Odin, remember to click on PDA, and Re Partition have to be disabled, only Auto Reboot and F.Reset Time should be checked, good luck, cheers:fingers-crossed:
make sure reactivation lock is uncheck at security settings...
I have one Samsung S5 4G+ SM-G901F on Orange network, Romania.
I want to downgrade from 5.0.2 G901FXXU1BOC4_G901FORL1BOC1_G901FXXU1BOC4 to 4.4.4 G901FXXU1ANH7_G901FORO1ANH2_G901FXXU1ANH6. Tried to flash with Odin this firmware from Sammobile and got this error:
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Also tried to use a PIT file G901F_pit_G901FXXU1ANH7_FTM but same error.
Now I flashed again 5.0.2, but how can I get back yo 4.4.4? I have understand it is something about new partitions size...
Thank you!
P.S. There is one thread about downgrade, but is for G900 models.
Hello Guys,
Im pretty new here but I really need someome to help me with this as Im totally lost here.
Yesterday I rooted my j3 sm-j320m and all went fine I converted the app I needed into systemapp and then unrooted the phone however by mistake I turned off developer options and with that OEM unlock so as expected when phone rebooted its now stuck on bootloop and error on screen with Custom Binary Blocked by FRP all in green letters.
So I downloaded the Stock firmware from sammobile and tried to flash it with Odin V3.13 however it got stucked on hidden.img and them Failed
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 1963 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried following another tutorial where it asked to Remove the hidden.img from Firmware by extracting the files and then use 7zip to create .tar image again and rename .md5 but Odin gives error hash value is invalid, tried removing .md5 from file and use it only as .tar but Odin wont read it.
I tried another tutorial where it says after error hidden.img Fails on Odin unplug phone and then re enter download mode and extract hidden.img file and rename .tar and flash it but now its stuck again on bootload but with two errors:
recovery is not seandroid enforcing
custom binary blocked by frp
All of that in green letters
Anyone knows how can I get the phone back up and running again?
Thanks
patbowling89 said:
Hello Guys,
Im pretty new here but I really need someome to help me with this as Im totally lost here.
Yesterday I rooted my j3 sm-j320m and all went fine I converted the app I needed into systemapp and then unrooted the phone however by mistake I turned off developer options and with that OEM unlock so as expected when phone rebooted its now stuck on bootloop and error on screen with Custom Binary Blocked by FRP all in green letters.
So I downloaded the Stock firmware from sammobile and tried to flash it with Odin V3.13 however it got stucked on hidden.img and them Failed
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 1963 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried following another tutorial where it asked to Remove the hidden.img from Firmware by extracting the files and then use 7zip to create .tar image again and rename .md5 but Odin gives error hash value is invalid, tried removing .md5 from file and use it only as .tar but Odin wont read it.
I tried another tutorial where it says after error hidden.img Fails on Odin unplug phone and then re enter download mode and extract hidden.img file and rename .tar and flash it but now its stuck again on bootload but with two errors:
recovery is not seandroid enforcing
custom binary blocked by frp
All of that in green letters
Anyone knows how can I get the phone back up and running again?
Thanks
Click to expand...
Click to collapse
Just flash the correct firmware for your device region and it will pass.
My galaxy grand prime suddenly went on a bootloop out of nowhere and i tried fixing it with factory reset and wiping the cache and i also tried flashing twrp and cwm recovery via odin and it was a success but when i tried going to recovery mode after i tried flasing twrp and cwm it says cant go to normal boot in odin mode.
i also tried flashing firmwares in wich i have downloaded from sammobile and always ends up failing like this
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> hyp.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> sec.dat
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Erase)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried flashing it with both new and old firmwares and tried doing it on many odin versions and with different pit files and with different usb cables and tried fixing it with samsung kies but still no luck.can somebody help me please
Hi there.
I tried to help one of our member which had exactly same problem like you..
You can refer to below thread :-
https://forum.xda-developers.com/grand-prime/help/please-help-to-flash-samsung-grand-t3867836
Good luck!