My galaxy grand prime suddenly went on a bootloop out of nowhere and i tried fixing it with factory reset and wiping the cache and i also tried flashing twrp and cwm recovery via odin and it was a success but when i tried going to recovery mode after i tried flasing twrp and cwm it says cant go to normal boot in odin mode.
i also tried flashing firmwares in wich i have downloaded from sammobile and always ends up failing like this
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> hyp.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> sec.dat
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Erase)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried flashing it with both new and old firmwares and tried doing it on many odin versions and with different pit files and with different usb cables and tried fixing it with samsung kies but still no luck.can somebody help me please
Hi there.
I tried to help one of our member which had exactly same problem like you..
You can refer to below thread :-
https://forum.xda-developers.com/grand-prime/help/please-help-to-flash-samsung-grand-t3867836
Good luck!
Related
I had installed the first leaked KitKat 4.4.2 on my rooted i9505 and it worked well. However when I tried to install the latest KitKat 4.4.2 I9505XXUFNAD_I9505OXXFNA2_I9505XXUFNAD_OXX firmware with odin, it fails. It can only boot up in download mode and in the recovery mode just shows the black screen of death. Is there any way to recover my i9505?
Here are the results I get with odin v3.09
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Does anyone know to resolve this?
Change of USB port in ur pc :fingers-crossed:
Joku1981 said:
Change of USB port in ur pc :fingers-crossed:
Click to expand...
Click to collapse
I've tried all the usb ports but the problem is still the same.
I've solved the problem. I was trying to flash in vmware on my macbook pro. I installed Boot Camp and then it flashed correctly.
I trying to install a custom recovery on my note 3.
Litteraly tried all odin versions, they all start the flash, then end up failed. (see below)
I tried it on 2 PCs, tried heimdall as well. Heimdall stops with a PIT failed to flash error.
I'm on 4.4.2
Are the any known issues that I couldn't find? Or it's something wrong with the phone?
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try the TWRP app in play store.
gabriellehr said:
I trying to install a custom recovery on my note 3.
Litteraly tried all odin versions, they all start the flash, then end up failed. (see below)
I tried it on 2 PCs, tried heimdall as well. Heimdall stops with a PIT failed to flash error.
I'm on 4.4.2
Are the any known issues that I couldn't find? Or it's something wrong with the phone?
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Reactivation lock maybe?
hi i am using note 3 N9005 model with official poland lollipop 5.0 update for over a month but today suddenly my phone got some lag and tried restarted but fail as it kept stuck on samsung boot logo forever...i tried removing battery and waiting but still there was no good... then when i tried booting in recovery ( TWRP which i flashed while rooting) the same thing happened and mobile kept stuck on samsung logo and at top left it was written -
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I have a good experience in flashing , odin and all this recovery stuff but i have never seen mobile not even getting into recovery...as last resort i thought of flashing the official rom image from odin .. but when i tried it showed me FAIL message in red box where connected shows...and in log it said -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am very much in need of some serious help as i use this mobile as my daily driver..any help will be appreciated!!:good:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
dancapitan said:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
Click to expand...
Click to collapse
thanks for help but that also doesnt work...same error again in odin..
I rooted my friends s5 through odin all worked fine. I then moved a fake gps app into the system files (which i did on my s5 neo, no problem). I restarted the s5 then it got stuck on the samsung loading screen. I then downloaded an andriod recovery app to get photos before a factory reset in the recovery, this failed and the phone got stuck in recovery mode. I managed to stop it booting straight to recovery, but doing this stopped me from going into recovery full stop. I downloaded new firmware files from sam mobile and proceeded to flash them whith odin. This fails at a certain point and the phone has gone into emergancy recovery screen. Its was running 6.1 and tried re flashing with an 6.1 firmware. only thing i can think of is that the phone is unlocked and the firmware is hg3 but its a three simcard in there. Couldn't find firmehere for any network.
The log files from odin:
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> NON-HLOS.bin
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> NON-HLOS.bin
<ID:0/004> rpm.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
Hi all,
Good day,
I trying to use Kingo Root to root my phone but halfway it failed. It stuck in Odin mode.
I tried to use Odin 3 to recover it back but it seems is not working.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what causing it stuck in system.img?
Please help to save my phone, almost 24hr since it died.
What model ??
DragonMebius said:
Hi all,
Good day,
I trying to use Kingo Root to root my phone but halfway it failed. It stuck in Odin mode.
I tried to use Odin 3 to recover it back but it seems is not working.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what causing it stuck in system.img?
Please help to save my phone, almost 24hr since it died.
Click to expand...
Click to collapse
Looks like you need pit file for revive you phone from death.