I had installed the first leaked KitKat 4.4.2 on my rooted i9505 and it worked well. However when I tried to install the latest KitKat 4.4.2 I9505XXUFNAD_I9505OXXFNA2_I9505XXUFNAD_OXX firmware with odin, it fails. It can only boot up in download mode and in the recovery mode just shows the black screen of death. Is there any way to recover my i9505?
Here are the results I get with odin v3.09
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Does anyone know to resolve this?
Change of USB port in ur pc :fingers-crossed:
Joku1981 said:
Change of USB port in ur pc :fingers-crossed:
Click to expand...
Click to collapse
I've tried all the usb ports but the problem is still the same.
I've solved the problem. I was trying to flash in vmware on my macbook pro. I installed Boot Camp and then it flashed correctly.
Ok, so I was running TWRP 2.8.5.0-trltedt and CM12 with its own kernel. N910G.
If I go to TWRP and install a custom Sh1twiz ROM via ZIP + nadia kernel it's fine and it works.
If I go to TWRP and wipe System, Dalvik and Internal Storage and then go into Download Mode and use Odin 3.10 to install an official ROM (N910GDTU1ANK3_N910GOLB1ANK3_N910GDTU1ANK3_HOME.tar.md5) from Sammobile then I get a:
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
The phone screen says:
Volume size is too big 92160 < 204800
ODIN: Invalid ext4 image
At this point if I restart the phone and try to enter TWRP (recovery) it doesn't work anymore, it goes into another screen that says:
"Firmware upgrade encountered an issue" etc.
If I go again into download mode and flash TWRP with Odin the flashing works.
Then, if I try to enter recovery it says something... I cant read it cause it happens too fast, but it's something related to "formatting", "cache", "wipe".
Then the phone restarts by itself and the phone seems to work.
However, if I go again in download mode and try to flash the original firmware with Odin, I get the same FAIL! (Ext4)... so this means the core problem was not fixed by TWRP.
I heard I may need to flash a PIT file with re-partition clicked?
But where do I find the right PIT file for N910G?
The thing is that even if the phone seems to work I am afraid that later I might find out that it doesnt work properly... after spending hours installing everything on it...
Im trying to return to stock and Odin fails at the very end of the flash each time. I was running blisspop before trying to flash, and i did a factory reset as well before trying to flash.
this is what the log says in odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You put the phone in recovery mode or download mode during flashing?
skrcer1 said:
Im trying to return to stock and Odin fails at the very end of the flash each time. I was running blisspop before trying to flash, and i did a factory reset as well before trying to flash.
this is what the log says in odin
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Download mode
androidtweaker1 said:
You put the phone in recovery mode or download mode during flashing?
Click to expand...
Click to collapse
Download mode
Are all the usb drivers installed?
skrcer1 said:
Download mode
Click to expand...
Click to collapse
androidtweaker1 said:
Are all the usb drivers installed?
Click to expand...
Click to collapse
Yes I have successfully flashed on this PC before
androidtweaker1 said:
You put the phone in recovery mode or download mode during flashing?
Click to expand...
Click to collapse
lol what question man stop kiding
ext 4 fail mean not same pit with your phone ty another stock rom or trick pit option with your pit ( if you want only this rom )
popmpopm said:
lol what question man stop kiding
ext 4 fail mean not same pit with your phone ty another stock rom or trick pit option with your pit ( if you want only this rom )
Click to expand...
Click to collapse
I tried using a different pit and it didn't seem to help.
I asked because some people use recovery mode while flashing.
Thanks for the additional info though :good:
popmpopm said:
lol what question man stop kiding
ext 4 fail mean not same pit with your phone ty another stock rom or trick pit option with your pit ( if you want only this rom )
Click to expand...
Click to collapse
popmpopm said:
lol what question man stop kiding
ext 4 fail mean not same pit with your phone ty another stock rom or trick pit option with your pit ( if you want only this rom )
Click to expand...
Click to collapse
how do I find the correct pit file for my rom? Im pretty sure i have the correct one but just in case??
androidtweaker1 said:
I asked because some people use recovery mode while flashing.
Thanks for the additional info though :good:
Click to expand...
Click to collapse
custom roms work and this stock rom actually did boot up even though it said failed in odin, although it was buggy in some places. Any ideas how to go back completely to stock?
What version of odin you using.
Asking because I was unable to flash stock whenever I used 3.10
3.07 worked for me
skrcer1 said:
custom roms work and this stock rom actually did boot up even though it said failed in odin, although it was buggy in some places. Any ideas how to go back completely to stock?
Click to expand...
Click to collapse
im using 3.10, ill try 3.07 and report back.
androidtweaker1 said:
I asked because some people use recovery mode while flashing.
Thanks for the additional info though :good:
Click to expand...
Click to collapse
androidtweaker1 said:
What version of odin you using.
Asking because I was unable to flash stock whenever I used 3.10
3.07 worked for me
Click to expand...
Click to collapse
Still a fail...
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOC7_G900FOJK1BOC2_G900FXXU1BOC7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
Same as before, I put in the pit file, put in the firmware, factory wiped my phone, put into download mode, plugged it in then started the flash.
I remember I had the same issue before but the XEO (polish firmware) flashed properly, I just tried it again and it works. Why wont my other stock firmware work? It should be the same european pit as the XEO firmware. Maybe a different bootloader or something? Or maybe it is a different pit? I want to install the ILO firmware, what pit does it need?
If you have custom recovery try flashing a stock rom through that method. If using Odin method, try taking the battery out of your phone first, put it back in and then boot phone directly into download mode, then try flashing. From the log you posted it looks as though you have a bad stock rom file. Try downloading another one or use different version of Odin like 3.07. Here is the link to all the CSC codes that may help: http://forum.xda-developers.com/showthread.php?t=800257 If you cant find any help with that link try this one: http://www.galaxys5update.com/galaxy-s5-sm-g900f-europe-android-4-4-2-g900fxxu1ance-firmware-stock-rom-list/ Hope this helps you out some.
skrcer1 said:
Still a fail...
<ID:0/003> Added!!
<ID:0/003> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1BOC7_G900FOJK1BOC2_G900FXXU1BOC7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
Same as before, I put in the pit file, put in the firmware, factory wiped my phone, put into download mode, plugged it in then started the flash.
I remember I had the same issue before but the XEO (polish firmware) flashed properly, I just tried it again and it works. Why wont my other stock firmware work? It should be the same european pit as the XEO firmware. Maybe a different bootloader or something? Or maybe it is a different pit? I want to install the ILO firmware, what pit does it need?
Click to expand...
Click to collapse
try to flash this last stock rom mega:///#!1AgXRSJC!qLhH124dDQE7marSruk89mAbVROJxGFF3bvXloyHYFc
for xeo you have last boj1
hi,
this happened to me and i followed the instructions from here : https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/
and this fixed it so i could go back to complete stock
odin 3.09 and usb 2.0 cable try
Usb 2.0 port used for flash frm lap
So I looked inside the md5 file and there is no such file hidden.img.ext4 maybe that is what the problem is? Can someone really show the line to normal stock ROM that can be flashed without all those trouble.
guys just tried flashing again with 6.0.1 netherlands and the same thing is happening, i think the problem was the XEO csc from the xeo 5.0 firmware but how do i fix it?!?!?!?!
My galaxy grand prime suddenly went on a bootloop out of nowhere and i tried fixing it with factory reset and wiping the cache and i also tried flashing twrp and cwm recovery via odin and it was a success but when i tried going to recovery mode after i tried flasing twrp and cwm it says cant go to normal boot in odin mode.
i also tried flashing firmwares in wich i have downloaded from sammobile and always ends up failing like this
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> hyp.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> sec.dat
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Erase)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried flashing it with both new and old firmwares and tried doing it on many odin versions and with different pit files and with different usb cables and tried fixing it with samsung kies but still no luck.can somebody help me please
Hi there.
I tried to help one of our member which had exactly same problem like you..
You can refer to below thread :-
https://forum.xda-developers.com/grand-prime/help/please-help-to-flash-samsung-grand-t3867836
Good luck!
Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Here are my steps.
1. Factory Reset Wipe out all Data
2. Go Back into the phone and enabled USB Debugging.
3. Go into Recovery (Down + Home + Power)
4. Odin Flash with Auto-reboot off (TWRP -twrp-3.6.2_9-0-trlte.img)
5. I got error from odin
--------------
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 13 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
--------------
It keeps failing. with the error log above.
I tried a couple of TWRP version, it fails with same error.
I tried a couple of Odin version, it fails with same error.
Is the bootloader lock ? Please help and shine me a light with this lost soul.
Thank you very much.
mixtmxim said:
Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Click to expand...
Click to collapse
afaik Odin can only flash tar or tar.md5 files so choose
twrp-3.6.2_9-0-trlte.img.tar.​Personally on that old device I use Odin 3.09 as I somewhere read it suits better.
mixtmxim said:
......
Is the bootloader lock ? Please help and shine me a light with this lost soul.....
Click to expand...
Click to collapse
No. Not on this old device (at least not on my N910F)
kit kat or marshmallow?