Ok, so I was running TWRP 2.8.5.0-trltedt and CM12 with its own kernel. N910G.
If I go to TWRP and install a custom Sh1twiz ROM via ZIP + nadia kernel it's fine and it works.
If I go to TWRP and wipe System, Dalvik and Internal Storage and then go into Download Mode and use Odin 3.10 to install an official ROM (N910GDTU1ANK3_N910GOLB1ANK3_N910GDTU1ANK3_HOME.tar.md5) from Sammobile then I get a:
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
The phone screen says:
Volume size is too big 92160 < 204800
ODIN: Invalid ext4 image
At this point if I restart the phone and try to enter TWRP (recovery) it doesn't work anymore, it goes into another screen that says:
"Firmware upgrade encountered an issue" etc.
If I go again into download mode and flash TWRP with Odin the flashing works.
Then, if I try to enter recovery it says something... I cant read it cause it happens too fast, but it's something related to "formatting", "cache", "wipe".
Then the phone restarts by itself and the phone seems to work.
However, if I go again in download mode and try to flash the original firmware with Odin, I get the same FAIL! (Ext4)... so this means the core problem was not fixed by TWRP.
I heard I may need to flash a PIT file with re-partition clicked?
But where do I find the right PIT file for N910G?
The thing is that even if the phone seems to work I am afraid that later I might find out that it doesnt work properly... after spending hours installing everything on it...
Related
I had installed the first leaked KitKat 4.4.2 on my rooted i9505 and it worked well. However when I tried to install the latest KitKat 4.4.2 I9505XXUFNAD_I9505OXXFNA2_I9505XXUFNAD_OXX firmware with odin, it fails. It can only boot up in download mode and in the recovery mode just shows the black screen of death. Is there any way to recover my i9505?
Here are the results I get with odin v3.09
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Does anyone know to resolve this?
Change of USB port in ur pc :fingers-crossed:
Joku1981 said:
Change of USB port in ur pc :fingers-crossed:
Click to expand...
Click to collapse
I've tried all the usb ports but the problem is still the same.
I've solved the problem. I was trying to flash in vmware on my macbook pro. I installed Boot Camp and then it flashed correctly.
hi i am using note 3 N9005 model with official poland lollipop 5.0 update for over a month but today suddenly my phone got some lag and tried restarted but fail as it kept stuck on samsung boot logo forever...i tried removing battery and waiting but still there was no good... then when i tried booting in recovery ( TWRP which i flashed while rooting) the same thing happened and mobile kept stuck on samsung logo and at top left it was written -
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I have a good experience in flashing , odin and all this recovery stuff but i have never seen mobile not even getting into recovery...as last resort i thought of flashing the official rom image from odin .. but when i tried it showed me FAIL message in red box where connected shows...and in log it said -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am very much in need of some serious help as i use this mobile as my daily driver..any help will be appreciated!!:good:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
dancapitan said:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
Click to expand...
Click to collapse
thanks for help but that also doesnt work...same error again in odin..
Hey guys. I tried to install the N910CXXU1BOC5 firmware on my Note 4 and this is what I get in Odin :
...
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
For the first time ever I can't flash with odin. What should I do ? I tried both 3.04 and 3.10.6 versions of Odin and both return "FAIL" as result and now I can't use my phone. Please help
GeorgEveS said:
Hey guys. I tried to install the N910CXXU1BOC5 firmware on my Note 4 and this is what I get in Odin :
...
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
For the first time ever I can't flash with odin. What should I do ? I tried both 3.04 and 3.10.6 versions of Odin and both return "FAIL" as result and now I can't use my phone. Please help
Click to expand...
Click to collapse
make sure you follow all the steps, remember you have to unzip the file you downloaded then you will be able to flash it via Odin, remember to click on PDA, and Re Partition have to be disabled, only Auto Reboot and F.Reset Time should be checked, good luck, cheers:fingers-crossed:
make sure reactivation lock is uncheck at security settings...
Tried to flash latest gtaxlwifi for my 8.1 Oreo Galaxy Tab A 10.1 SM-T580,
after Odin finished, i encountered a problem. The device didn't respond to the power button, so i can go to the recovery for the first time.
After many tries, i managed to get it back to download mode. After that, i tried to go the recovery and my screen showed some red bars, like the lcd is all messed up.
Putting it back to download mode, the screen works fine.
What should i do, please help me.
The LCD isn't bad if download screen is good. May have some how flashed wrong firmware
TheMadScientist said:
The LCD isn't bad if download screen is good. May have some how flashed wrong firmware
Click to expand...
Click to collapse
I didn't flash a firmware i tried to flash a custom recovery.
oXydead said:
I didn't flash a firmware i tried to flash a custom recovery.
Click to expand...
Click to collapse
Well restore your stock firmware properly per your model and location and it should be good you probably flashed the wrong one or something for your current firmware
TheMadScientist said:
Well restore your stock firmware properly per your model and location and it should be good you probably flashed the wrong one or something for your current firmware
Click to expand...
Click to collapse
Tried but it fails.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 2473 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
on tablet
SW REV. CHECK FAIL (BOOTLOADER) DEVICE 4 BINARY 3
It does the same thing to me running android 7 Galaxy Tab A6 10.1 SM-T580. I tried installing different versions of twrp with different versions of odin. Does the same thing to me. some red lines, blue lines. Although if you shut down & then boot, it works normally.. but i guess no root for us!!
oXydead said:
Tried but it fails.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 2473 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
on tablet
SW REV. CHECK FAIL (BOOTLOADER) DEVICE 4 BINARY 3
Click to expand...
Click to collapse
thats the bootloader telling you your flashing older firmware than whats on the device hence trying to downgrade which isnt possible obviously with that error download a newer firmware with a bit 4 because your device is bit 4 nd your flashing bit 3
Managed to flash an older twrp. Tablet saved.
But when i tried to install a wifi version (that's the correct for me), it said error 7 u have the LTE version (not true) and you try to install a wifi version.
A tweak with Notepad++ did the job.
oXydead - I have the same issue - which old verison of TWRP worked for you?
Not to worry - found your comments in "[Recovery][T580] Official TWRP for Galaxy Tab A 10.1 WiFi 2016 (gtaxlwifi) by jcadduono"
Thanks
you can fix it:
https://forum.xda-developers.com/showpost.php?p=78478237&postcount=573
for Oreo (8.1) use the last Odin 3.13.1
My galaxy grand prime suddenly went on a bootloop out of nowhere and i tried fixing it with factory reset and wiping the cache and i also tried flashing twrp and cwm recovery via odin and it was a success but when i tried going to recovery mode after i tried flasing twrp and cwm it says cant go to normal boot in odin mode.
i also tried flashing firmwares in wich i have downloaded from sammobile and always ends up failing like this
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> hyp.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> sec.dat
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Erase)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried flashing it with both new and old firmwares and tried doing it on many odin versions and with different pit files and with different usb cables and tried fixing it with samsung kies but still no luck.can somebody help me please
Hi there.
I tried to help one of our member which had exactly same problem like you..
You can refer to below thread :-
https://forum.xda-developers.com/grand-prime/help/please-help-to-flash-samsung-grand-t3867836
Good luck!