Help got stuck on download mode and i think lcd is broken, - Samsung Galaxy Tab A series Questions & Answers

Tried to flash latest gtaxlwifi for my 8.1 Oreo Galaxy Tab A 10.1 SM-T580,
after Odin finished, i encountered a problem. The device didn't respond to the power button, so i can go to the recovery for the first time.
After many tries, i managed to get it back to download mode. After that, i tried to go the recovery and my screen showed some red bars, like the lcd is all messed up.
Putting it back to download mode, the screen works fine.
What should i do, please help me.

The LCD isn't bad if download screen is good. May have some how flashed wrong firmware

TheMadScientist said:
The LCD isn't bad if download screen is good. May have some how flashed wrong firmware
Click to expand...
Click to collapse
I didn't flash a firmware i tried to flash a custom recovery.

oXydead said:
I didn't flash a firmware i tried to flash a custom recovery.
Click to expand...
Click to collapse
Well restore your stock firmware properly per your model and location and it should be good you probably flashed the wrong one or something for your current firmware

TheMadScientist said:
Well restore your stock firmware properly per your model and location and it should be good you probably flashed the wrong one or something for your current firmware
Click to expand...
Click to collapse
Tried but it fails.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 2473 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
on tablet
SW REV. CHECK FAIL (BOOTLOADER) DEVICE 4 BINARY 3

It does the same thing to me running android 7 Galaxy Tab A6 10.1 SM-T580. I tried installing different versions of twrp with different versions of odin. Does the same thing to me. some red lines, blue lines. Although if you shut down & then boot, it works normally.. but i guess no root for us!!

oXydead said:
Tried but it fails.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> userdata.img
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 2473 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
on tablet
SW REV. CHECK FAIL (BOOTLOADER) DEVICE 4 BINARY 3
Click to expand...
Click to collapse
thats the bootloader telling you your flashing older firmware than whats on the device hence trying to downgrade which isnt possible obviously with that error download a newer firmware with a bit 4 because your device is bit 4 nd your flashing bit 3

Managed to flash an older twrp. Tablet saved.
But when i tried to install a wifi version (that's the correct for me), it said error 7 u have the LTE version (not true) and you try to install a wifi version.
A tweak with Notepad++ did the job.

oXydead - I have the same issue - which old verison of TWRP worked for you?
Not to worry - found your comments in "[Recovery][T580] Official TWRP for Galaxy Tab A 10.1 WiFi 2016 (gtaxlwifi) by jcadduono"
Thanks

you can fix it:
https://forum.xda-developers.com/showpost.php?p=78478237&postcount=573
for Oreo (8.1) use the last Odin 3.13.1

Related

[HELP]Galaxy note 3 stuck on boot logo

hi i am using note 3 N9005 model with official poland lollipop 5.0 update for over a month but today suddenly my phone got some lag and tried restarted but fail as it kept stuck on samsung boot logo forever...i tried removing battery and waiting but still there was no good... then when i tried booting in recovery ( TWRP which i flashed while rooting) the same thing happened and mobile kept stuck on samsung logo and at top left it was written -
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I have a good experience in flashing , odin and all this recovery stuff but i have never seen mobile not even getting into recovery...as last resort i thought of flashing the official rom image from odin .. but when i tried it showed me FAIL message in red box where connected shows...and in log it said -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am very much in need of some serious help as i use this mobile as my daily driver..any help will be appreciated!!:good:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
dancapitan said:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
Click to expand...
Click to collapse
thanks for help but that also doesnt work...same error again in odin..

at&t stock firmware galaxy s7 G930a b4

Does anyone know where I can find the stock firmware for my at&t galaxy s7 SM-930A APB4? I found APB5 but ODIN won't flash it as it's saying its the incorrect matching firmware. I have searched far and wide trying to find the firmware for my phone. It's like I somehow managed to snag the most niche phone on the planet with no stock firmware. Thanks!
PB5 should flash fine. Try a different odin
This is what I get when I try to flash APB5
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And then on my Galaxy s7 it says "SW REV CHECK FAIL : [system]Fused 3 > Binary 1
iscream612 said:
This is what I get when I try to flash APB5
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And then on my Galaxy s7 it says "SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Click to expand...
Click to collapse
A quick search I ran found that it seems you may be trying to downgrade. What version were you on prior to this? It sounds like you were either on a T-Mobile firmware or on the latest PI2 firmware (Based on that "Fused 3"). If you don't remember but you haven't taken any updates since you got it, could you provide the date you got it? Then I could help. Thanks.
SkyAttacksX said:
A quick search I ran found that it seems you may be trying to downgrade. What version were you on prior to this? It sounds like you were either on a T-Mobile firmware or on the latest PI2 firmware (Based on that "Fused 3"). If you don't remember but you haven't taken any updates since you got it, could you provide the date you got it? Then I could help. Thanks.
Click to expand...
Click to collapse
I was on the newest Sept bootloader update. With the help of a couple people I was able to flash the unlocked firmware.
http://forum.xda-developers.com/att-galaxy-s7/how-to/please-shed-light-att-s7-root-failures-t3481904
Joe3681 is currently uploaded the Sept AT&T firmware so soon I should be able to flash back to at&T and be all set.
Thanks!!

s7 edge 935f jammed on powered by android screen

Hey guys/gals . my phone locked up after a restart from updating magisk and now stuck on the s7 edge powered by android screen. i have tried to open twrp but it wont leave the earlier mentioned screen. i can however enter download mode. i tried using ODIN3 v3.12 reflashing the same BL, AP, CP and CSC but with no luck. i have also tried to flash the stock FW but get error on phone saying SW REV. CHECK FAIL. DEVICE: 2 BINARY: 1 after Odin fails and the log reads
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The flash files I have used previously that worked are
twrp-3.1.0-0-hero2lte.img.tar (Used in BL for Root)
AP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (stock)
BL_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5 (stock)
HOME_CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5(Stock)
Is this recoverable or am I looking at an expensive paperweight. cheers
Edit. I can now boot into TWRP and download mode now, Just can't seem to get it to take an OS, the storage it showing up fine in TWRP and on a pc, except its empty space.
Any advice to solve this would be much appreciated

[help] galaxy grand prime sm-g530h on bootloop

My galaxy grand prime suddenly went on a bootloop out of nowhere and i tried fixing it with factory reset and wiping the cache and i also tried flashing twrp and cwm recovery via odin and it was a success but when i tried going to recovery mode after i tried flasing twrp and cwm it says cant go to normal boot in odin mode.
i also tried flashing firmwares in wich i have downloaded from sammobile and always ends up failing like this
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> hyp.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> sec.dat
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Erase)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried flashing it with both new and old firmwares and tried doing it on many odin versions and with different pit files and with different usb cables and tried fixing it with samsung kies but still no luck.can somebody help me please
Hi there.
I tried to help one of our member which had exactly same problem like you..
You can refer to below thread :-
https://forum.xda-developers.com/grand-prime/help/please-help-to-flash-samsung-grand-t3867836
Good luck!

Help Need. Flash TWRP Custom Rom to Samsung Note 4 (SM-N910F)

Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Here are my steps.
1. Factory Reset Wipe out all Data
2. Go Back into the phone and enabled USB Debugging.
3. Go into Recovery (Down + Home + Power)
4. Odin Flash with Auto-reboot off (TWRP -twrp-3.6.2_9-0-trlte.img)
5. I got error from odin
--------------
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 13 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
--------------
It keeps failing. with the error log above.
I tried a couple of TWRP version, it fails with same error.
I tried a couple of Odin version, it fails with same error.
Is the bootloader lock ? Please help and shine me a light with this lost soul.
Thank you very much.
mixtmxim said:
Note sure if this is the right thread to post.
Phone Model : Samsung SM-N910F (Samsung Note 4)
I am using Odin v3.13.1.
TWRP -twrp-3.6.2_9-0-trlte.img
Click to expand...
Click to collapse
afaik Odin can only flash tar or tar.md5 files so choose
twrp-3.6.2_9-0-trlte.img.tar.​Personally on that old device I use Odin 3.09 as I somewhere read it suits better.
mixtmxim said:
......
Is the bootloader lock ? Please help and shine me a light with this lost soul.....
Click to expand...
Click to collapse
No. Not on this old device (at least not on my N910F)
kit kat or marshmallow?

Categories

Resources