Does anyone know where I can find the stock firmware for my at&t galaxy s7 SM-930A APB4? I found APB5 but ODIN won't flash it as it's saying its the incorrect matching firmware. I have searched far and wide trying to find the firmware for my phone. It's like I somehow managed to snag the most niche phone on the planet with no stock firmware. Thanks!
PB5 should flash fine. Try a different odin
This is what I get when I try to flash APB5
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And then on my Galaxy s7 it says "SW REV CHECK FAIL : [system]Fused 3 > Binary 1
iscream612 said:
This is what I get when I try to flash APB5
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And then on my Galaxy s7 it says "SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Click to expand...
Click to collapse
A quick search I ran found that it seems you may be trying to downgrade. What version were you on prior to this? It sounds like you were either on a T-Mobile firmware or on the latest PI2 firmware (Based on that "Fused 3"). If you don't remember but you haven't taken any updates since you got it, could you provide the date you got it? Then I could help. Thanks.
SkyAttacksX said:
A quick search I ran found that it seems you may be trying to downgrade. What version were you on prior to this? It sounds like you were either on a T-Mobile firmware or on the latest PI2 firmware (Based on that "Fused 3"). If you don't remember but you haven't taken any updates since you got it, could you provide the date you got it? Then I could help. Thanks.
Click to expand...
Click to collapse
I was on the newest Sept bootloader update. With the help of a couple people I was able to flash the unlocked firmware.
http://forum.xda-developers.com/att-galaxy-s7/how-to/please-shed-light-att-s7-root-failures-t3481904
Joe3681 is currently uploaded the Sept AT&T firmware so soon I should be able to flash back to at&T and be all set.
Thanks!!
Related
I get this error:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried installing TWRP via the manager app and now my phone will only boot into download mode. Any help available?
Fail auth indicates that you are flashing a firmware that has a lower version of the boot loader than the one on the phone.
http://forum.xda-developers.com/showthread.php?t=2926642
When the I try to flash my phone with odin, I end up getting the same error code. Is there anyway I can reflash it to stock.
My phone is not working at all. I have no clue what I did. I tried to use kies to get me to stock but it gave me an error and now I have a "Firmware upgrade encountered an issue." It is stuck at download mode. Can someone help with this.
I trying to install a custom recovery on my note 3.
Litteraly tried all odin versions, they all start the flash, then end up failed. (see below)
I tried it on 2 PCs, tried heimdall as well. Heimdall stops with a PIT failed to flash error.
I'm on 4.4.2
Are the any known issues that I couldn't find? Or it's something wrong with the phone?
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try the TWRP app in play store.
gabriellehr said:
I trying to install a custom recovery on my note 3.
Litteraly tried all odin versions, they all start the flash, then end up failed. (see below)
I tried it on 2 PCs, tried heimdall as well. Heimdall stops with a PIT failed to flash error.
I'm on 4.4.2
Are the any known issues that I couldn't find? Or it's something wrong with the phone?
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Reactivation lock maybe?
Hi all,
I'm having an issue with flashing any custom recovery to my international international N910F variant of the Galaxy Note 4 using Odin (multiple versions).
Can anyone shed some light on this and how to fix?
Odin output of failure:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks!
I had the same thing. Downloaded the newest version of ODIn (V3.09) and flashed the latest version of TWRP:
http://www.techerrata.com/file/twrp2/trltexx/openrecovery-twrp-2.8.5.0-trltexx.img.tar
Then it worked.
AT&T
Galaxy S7
Android security patch level: Sept 1, 2016
Baseband version: G930AUCS4API2
Build number: MMB2M.G930AUCS4API2
I attempted to root my phone with the guide you can find by The Unlockr (David Cogen)
I followed the steps exactly but unfortunately it would freeze on AT&T symbol...
So I tried flashing stock firmwares with no luck. So I wiped data/restored factory settings and fortunately my phone runs. However I keep getting a popup saying "Security Notice: Unauthorized actions have been detected." Which I am assuming means I tripped KNOX. =(
Is there a way to remove this trip? Does anyone know a firmware that SHOULD flash properly on my phone?
Here is the error I get when I try to flash the 2 firmwares I have found (G930AUCS2APF2, G930AUCU1APB5)
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for any help you can provide..
iscream612 said:
AT&T
Galaxy S7
Android security patch level: Sept 1, 2016
Baseband version: G930AUCS4API2
Build number: MMB2M.G930AUCS4API2
I attempted to root my phone with the guide you can find by The Unlockr (David Cogen)
I followed the steps exactly but unfortunately it would freeze on AT&T symbol...
So I tried flashing stock firmwares with no luck. So I wiped data/restored factory settings and fortunately my phone runs. However I keep getting a popup saying "Security Notice: Unauthorized actions have been detected." Which I am assuming means I tripped KNOX. =(
Is there a way to remove this trip? Does anyone know a firmware that SHOULD flash properly on my phone?
Here is the error I get when I try to flash the 2 firmwares I have found (G930AUCS2APF2, G930AUCU1APB5)
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for any help you can provide..
Click to expand...
Click to collapse
You may be on a newer bootloader which is why you are receiving the pit file error when flashing lower firmware
Sent from my SM-G930P using XDA-Developers mobile app
iscream612 said:
AT&T
Galaxy S7
Android security patch level: Sept 1, 2016
Baseband version: G930AUCS4API2
Build number: MMB2M.G930AUCS4API2
I attempted to root my phone with the guide you can find by The Unlockr (David Cogen)
I followed the steps exactly but unfortunately it would freeze on AT&T symbol...
So I tried flashing stock firmwares with no luck. So I wiped data/restored factory settings and fortunately my phone runs. However I keep getting a popup saying "Security Notice: Unauthorized actions have been detected." Which I am assuming means I tripped KNOX. =(
Is there a way to remove this trip? Does anyone know a firmware that SHOULD flash properly on my phone?
Here is the error I get when I try to flash the 2 firmwares I have found (G930AUCS2APF2, G930AUCU1APB5)
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for any help you can provide..
Click to expand...
Click to collapse
The september patch has a new bootloader which means you can't downgrade below API2. And no, you didn't trip knox. That notification pops up regardless when the security log detects that the phone is rooted, So you should be fine. API3 G930U firmware flashes perfectly and works really well, I recommend using it.
G930U Firmware >
http://forum.xda-developers.com/att...4api3-firmware-download-t3481159#post69147585
VenomMOD said:
The september patch has a new bootloader which means you can't downgrade below API2. And no, you didn't trip knox. That notification pops up regardless when the security log detects that the phone is rooted, So you should be fine. API3 G930U firmware flashes perfectly and works really well, I recommend using it.
G930U Firmware >
http://forum.xda-developers.com/att...4api3-firmware-download-t3481159#post69147585
Click to expand...
Click to collapse
You are the man, thank you so much! And big thanks to joe3681 for paying/uploading the firmware for us! :good:
VenomMOD said:
G930U Firmware >
Click to expand...
Click to collapse
Also, what firmware is this? Custom? From another carrier? It's definitely different than my old at&t firmware..
iscream612 said:
Also, what firmware is this? Custom? From another carrier? It's definitely different than my old at&t firmware..
Click to expand...
Click to collapse
It's the firmware of the Unlocked S7 variant, which is Official Samsung firmware. No AT&T bloat or anything.
Performance and battery life have gotten better on this Firmware, and no overheating either.
VenomMOD said:
Performance and battery life have gotten better on this Firmware, and no overheating either.
Click to expand...
Click to collapse
I really do enjoy the idea of no bloat and better performance/battery life. Theres just some things that I will miss, like at&t advanced text messaging..
Hello I am new to this process but I am running my S8, SM-950U1, on Android 8.0.0 Oreo.
I want to root it by adding safestrap but I need to be on Nougat to do this.
Does anyone know how to properly downgrade from android 8.0.0 to android 7.0.0?
Side Note: I have tried to flash the 7.0.0 firmware onto my phone and this is the error message
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Sweggyp said:
Hello I am new to this process but I am running my S8, SM-950U1, on Android 8.0.0 Oreo.
I want to root it by adding safestrap but I need to be on Nougat to do this.
Does anyone know how to properly downgrade from android 8.0.0 to android 7.0.0?
Side Note: I have tried to flash the 7.0.0 firmware onto my phone and this is the error message
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
1. You are not using latest Odin version ( 3.13.1 )
2. Due to boot loader versions you can not downgrade from Oreo to nougat.
Sweggyp said:
Hello I am new to this process but I am running my S8, SM-950U1, on Android 8.0.0 Oreo.
I want to root it by adding safestrap but I need to be on Nougat to do this.
Does anyone know how to properly downgrade from android 8.0.0 to android 7.0.0?
Side Note: I have tried to flash the 7.0.0 firmware onto my phone and this is the error message
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
5th digit from end in your firmware is you current bootloader bit number. Im gonna assume its a 5.
After you have safe strap you can then use safe strap to insall the bit 5 combination bootloader then flash any nougat system IMG that has been extracted from a bit 2 firmware and su and busy box. There are several guides posted on this now. You cannot just flash a nougat firmware which is bit 2.
---------- Post added at 07:12 AM ---------- Previous post was at 07:11 AM ----------
spawnlives said:
1. You are not using latest Odin version ( 3.13.1 )
2. Due to boot loader versions you can not downgrade from Oreo to nougat.
Click to expand...
Click to collapse
With safe strap you can downgrade to nougat. As long as its a bit 5 and if your still on the oreo betas which are bit 2 you can downgrade.