Hello Guys,
Im pretty new here but I really need someome to help me with this as Im totally lost here.
Yesterday I rooted my j3 sm-j320m and all went fine I converted the app I needed into systemapp and then unrooted the phone however by mistake I turned off developer options and with that OEM unlock so as expected when phone rebooted its now stuck on bootloop and error on screen with Custom Binary Blocked by FRP all in green letters.
So I downloaded the Stock firmware from sammobile and tried to flash it with Odin V3.13 however it got stucked on hidden.img and them Failed
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 1963 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried following another tutorial where it asked to Remove the hidden.img from Firmware by extracting the files and then use 7zip to create .tar image again and rename .md5 but Odin gives error hash value is invalid, tried removing .md5 from file and use it only as .tar but Odin wont read it.
I tried another tutorial where it says after error hidden.img Fails on Odin unplug phone and then re enter download mode and extract hidden.img file and rename .tar and flash it but now its stuck again on bootload but with two errors:
recovery is not seandroid enforcing
custom binary blocked by frp
All of that in green letters
Anyone knows how can I get the phone back up and running again?
Thanks
patbowling89 said:
Hello Guys,
Im pretty new here but I really need someome to help me with this as Im totally lost here.
Yesterday I rooted my j3 sm-j320m and all went fine I converted the app I needed into systemapp and then unrooted the phone however by mistake I turned off developer options and with that OEM unlock so as expected when phone rebooted its now stuck on bootloop and error on screen with Custom Binary Blocked by FRP all in green letters.
So I downloaded the Stock firmware from sammobile and tried to flash it with Odin V3.13 however it got stucked on hidden.img and them Failed
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 1963 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried following another tutorial where it asked to Remove the hidden.img from Firmware by extracting the files and then use 7zip to create .tar image again and rename .md5 but Odin gives error hash value is invalid, tried removing .md5 from file and use it only as .tar but Odin wont read it.
I tried another tutorial where it says after error hidden.img Fails on Odin unplug phone and then re enter download mode and extract hidden.img file and rename .tar and flash it but now its stuck again on bootload but with two errors:
recovery is not seandroid enforcing
custom binary blocked by frp
All of that in green letters
Anyone knows how can I get the phone back up and running again?
Thanks
Click to expand...
Click to collapse
Just flash the correct firmware for your device region and it will pass.
Related
hi i am using note 3 N9005 model with official poland lollipop 5.0 update for over a month but today suddenly my phone got some lag and tried restarted but fail as it kept stuck on samsung boot logo forever...i tried removing battery and waiting but still there was no good... then when i tried booting in recovery ( TWRP which i flashed while rooting) the same thing happened and mobile kept stuck on samsung logo and at top left it was written -
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
I have a good experience in flashing , odin and all this recovery stuff but i have never seen mobile not even getting into recovery...as last resort i thought of flashing the official rom image from odin .. but when i tried it showed me FAIL message in red box where connected shows...and in log it said -
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I am very much in need of some serious help as i use this mobile as my daily driver..any help will be appreciated!!:good:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
dancapitan said:
some silent update from samsung messed your phone.
put in download mode and reflash another official rom with odin.
Click to expand...
Click to collapse
thanks for help but that also doesnt work...same error again in odin..
Hi,
Hope someone can help me. I'm having problems rooting my Note 4 N910F. Initially I tried CF's autoroot but my phone went into a loop with the message "CF Auto Root, Set Warranty bit : recovery" message appearing in the top left. I could not get it out of this, so then tried to install TWRP recovery. This seemed to be successful as the phone rebooted and i was able to use my phone again. See Odin log :
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
However when I tried to get into TWRP it simply boots into the stock android recovery. When i try to do a OTA update now I get the message " The operating system on your device has been modified...."
Thanks
Paul
Ok Think I've worked this out for myself. Think with CF autoroot I needed a special file that was posted by a Tony on here for my version of the N910F. Tried the TWRP again with Odin and did not do an automatic reboot this time. Pulled the battery and booted into recovery and have TWRP. Seems my phone was automatically replacing TWRP with stock recovery.
Hope this helps somebody else out!
Hey guys/gals . my phone locked up after a restart from updating magisk and now stuck on the s7 edge powered by android screen. i have tried to open twrp but it wont leave the earlier mentioned screen. i can however enter download mode. i tried using ODIN3 v3.12 reflashing the same BL, AP, CP and CSC but with no luck. i have also tried to flash the stock FW but get error on phone saying SW REV. CHECK FAIL. DEVICE: 2 BINARY: 1 after Odin fails and the log reads
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The flash files I have used previously that worked are
twrp-3.1.0-0-hero2lte.img.tar (Used in BL for Root)
AP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (stock)
BL_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5 (stock)
HOME_CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5(Stock)
Is this recoverable or am I looking at an expensive paperweight. cheers
Edit. I can now boot into TWRP and download mode now, Just can't seem to get it to take an OS, the storage it showing up fine in TWRP and on a pc, except its empty space.
Any advice to solve this would be much appreciated
Can someone please help me out
This morning i was running AlexisRom on my Galaxy s8 (SM-G950FD) which is an s9 port for s8 but the headphone jack wasn't working on the rom so i downloaded a stock rom from Sammobile and tried to flash it through odin, and after i put in the BL, AP, CP and CSC file and pressed start, it gives me a fail and says :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2753 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> param.bin
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my phone in the download mode, it comes up in red writing:
[CM] SW Rev. CHECK FAIL. DEVICE 3. BINARY 2
Also, i cannot get into recovery at all by pressing Bixby + Vol up + Power, it just bootloops
If i try install TWRP, my phone boots and shows the Samsung screen and says in pink writing on the top:
RECOVERY image signature check fail!!!!
Reboot to avoid warranty bit set!!
And i am 100% sure that the phone works as i had it working yesterday perfectly fine.
The roms i have installed before this one:
Stock S8 Rom
AMBASADII ROM FOR S8/S8+
Alexisrom s9 port for s8
Someone please help me out, if you need more details please ask!
THANKS <3
For anyone who has the same problem as me, here is a fix i found after almost giving up,
Go to Sammobile.com or Shell.BoxWares.com and download the latest firmware for your phone model, even if it isn't your country, still download and flash it, i live in ireland, so i should have 3IE Firmware but i downloaded the Indonesian firmware and it flashed without a single hassle
Its due to bootloader issue
xNexeon said:
Can someone please help me out
This morning i was running AlexisRom on my Galaxy s8 (SM-G950FD) which is an s9 port for s8 but the headphone jack wasn't working on the rom so i downloaded a stock rom from Sammobile and tried to flash it through odin, and after i put in the BL, AP, CP and CSC file and pressed start, it gives me a fail and says :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2753 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> param.bin
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my phone in the download mode, it comes up in red writing:
[CM] SW Rev. CHECK FAIL. DEVICE 3. BINARY 2
Also, i cannot get into recovery at all by pressing Bixby + Vol up + Power, it just bootloops
If i try install TWRP, my phone boots and shows the Samsung screen and says in pink writing on the top:
RECOVERY image signature check fail!!!!
Reboot to avoid warranty bit set!!
And i am 100% sure that the phone works as i had it working yesterday perfectly fine.
The roms i have installed before this one:
Stock S8 Rom
AMBASADII ROM FOR S8/S8+
Alexisrom s9 port for s8
Someone please help me out, if you need more details please ask!
THANKS <3
Click to expand...
Click to collapse
You are trying to flash a old bootloader on top of new bootloader version, downgrading is not allowed AFAIK
There is a simple reason for this. If you came from TWRP as "reboot to download", this creates the problem. Turn off the phone. Go to download mode with Vol_Down+Bixby+Power and then press Vol_Up button. When I enter download mode like this, it flashes without any problems.
Answer, apparently I was using v4 bootloader, thought I was on most recent, but I wasn't. Had a hard time finding newer/current firmwares for my device, but was able to find v5, flashed and went perfectly
So I'm trying to reset my phone as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks