Related
Ok, hope you guys can help me here, just got my HD, to replace my old XDA Orbit, now my Orbit obviously doesnt have 3G or HSDPA so it never bothered me before but now i have a capable phone and i dont seem to be getting the service.
At the moment dispite being slap bang in the middle of a high overerage area for both 3G and HSDPA i can only seem to get EDGE, my bandwidth is a low 300kbps
Is there something im missing here, the auto network settings fired up and setup EDGE/GPRS fine, no probs there but have i missed something for 3G?
The settings are setup to use HSDPA where available in the settings menu
im using Duttys 1.7 ROM
read the post above
http://forum.xda-developers.com/showthread.php?t=474972
Sorry for my assumption, the XDA Orbit would be a UK O2 based phone, cheers tho
Im fully away that the states isnt running compatable frequencies for the HD but im pretty sure O2 UK is.
My SIM card is however rather old, could that have something to do with it.
I cant see how it could unless there are settings that O2 have to enable their end, kinda hoping someone heard of something similar.
dazza9075 said:
My SIM card is however rather old, could that have something to do with it.
I cant see how it could unless there are settings that O2 have to enable their end, kinda hoping someone heard of something similar.
Click to expand...
Click to collapse
Well I'm in Aus and when I moved from GSM to 3G I needed a new USim to do it.
Maybe ring and ask O2?
1) check you have a USIM as poster above says as an older 2g sim won't work with 3g
2) if you, then try turning network selection to 3g/umts instead of auto - just to see if that kicks it over to 3g. You should probably put it back to auto after this test - or your phone wont be able to drop back to 2g when it cant find a 3g signal.
Good thread, it solved my problem! Thanks!
Type *#*#4636#*#*
Select Phone Information
Choose WCDMA only
this worked thanks!
kolyan said:
Type *#*#4636#*#*
Select Phone Information
Choose WCDMA only
Click to expand...
Click to collapse
What happens if no 3g is available? Does this apply to the uk as well?
at&t
two questions:
1. Will this enable 3g use on at&t's network?
2. Is it possible to revert?
1. No
2. Yes, just tap in the same code and switch it back.
You can switch back by using the same code.
If you do not have 3G while this is set to 3G only you will not have any data service, unless you switch it back.
It will not make 3G work on ATT (different frequency)
for those who weren't paying attention when they did this, the default setting is "WCDMA Preferred".
i dont understand why you wouldn't leave it as that????
neilosb said:
i dont understand why you wouldn't leave it as that????
Click to expand...
Click to collapse
Well, because if you are out of 3G coverage area, you don't have and data coverage any more, no web, no email, no syncs, no map. nothing.
Wow, Thank you for the trick, after I did the trick, I tested my 3G speed 4 times to make sure it, My 3G speed is increased greatly. Before this trick I only got about 480 kbit/s, now I tested 4 time I get average 780 kbit/s. That is cool!
Thank again.
Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
It is a software bug and I think I sort it out after flashing the phone. For now I sorted out the problem using Networks app by Philipp Mangalov and switching network to LTE/GSM auto
Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?
Indopilot said:
Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?
Click to expand...
Click to collapse
I only have 3G and the phone shows that I have internet, but when I try to actually use the data it just says no connection on apps.
zbysogi said:
Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?
Click to expand...
Click to collapse
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA
sachak said:
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA
Click to expand...
Click to collapse
GravityBox is a perfect solution for this problem. You can set up an icon in notification bar allowing You to toggle between 2G/3G/4G
zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse
same problem
This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.
TerryWebbs said:
This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.
Click to expand...
Click to collapse
Could you tell me some app that resolve this?
Thanks
I've got a UMI Super and had this issue as well:
try this app:
Network by Philipp Mangelow
https://play.google.com/store/apps/details?id=de.mangelow.network
4g Umi Super on Giff Gaff
You need Giff Gaff settings in access point name. If you try and use O2 4g it doesn't work even though Giff Gaff uses O2 network. Settings are really easy to input but MUST be Giff Gaff not O2.
zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse
There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.
4G on a Umi Super on GiffGaff.
zbysogi said:
There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.
Click to expand...
Click to collapse
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.
Maz Jones said:
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.
Click to expand...
Click to collapse
Well said. I just shake my head in despair when I see how totally clueless people try to be teachers and Internet gurus with very limited knowledge about the task at hand. These comments should come with warning stickers.
For those who want to be able to switch between 3G/4G and LTE only, use this nifty little APK that I've attached below. It will allow you to enter engineer mode without using the dial code.
Hi
This is a bug implemented in Android 7.0.
I had the same.
1 Just force in your parameters 2G/3G networks
2 wait for network authentification (no more excalamtion mark)
3 go back to 4G
Every thing will be OK to next switch off or plane mode.
Rgds,
LTE band 7 (2600) not working
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks
bemo00 said:
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks
Click to expand...
Click to collapse
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).
SimurghXDA said:
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).
Click to expand...
Click to collapse
Is it safe to change the IMEI number? and where can I find another number for a UMI device?
GPS is working fine, it fixes pretty fast, but I'm not sure about interruption in the signal because I haven't used it enough yet
i am having issues with my phone now, i only get E (edge speed all the time ever i pay my bill) i have a gig of LTE data and i always get edge speed no matter where i am in the 5 burrows of NY. this was not the case before, i never gotten LTE from the beginning because tmobile uses different bands then what this phone has< that i understand and will address another time but i use to always get H+ service watch was great and idk what happen but after some updates my service degraded and i cant figure out what it is if its ether my sim card going bad (i dont know anyone with another tmobile phone) or if my phone is messing up. I called the company and they said everything is ok on their end and that i have coverage and lte capability and insisted that it was my phone. i tried back flashing a while back and to no avail. i am about to attempt to deepflash back to factory image back when the phone first came out but i was wondering if that will even downgrade the modem or make a difference?
Install guru network app , via playstore , and check all fully tests , and lock network profile! And bands , try !
sahafdeen said:
Install guru network app , via playstore , and check all fully tests , and lock network profile! And bands , try !
Click to expand...
Click to collapse
yes, its related to bands avalible on your phone
for instance, my carrier uses B1-2100mhz and b8-900mhz for 3g. My phone doesnt work on 900mhz 3g so i disabled it
now i got full lte and 3g(H+) all the time
try disabling one of them and see for yourself
Jure_aleksic said:
yes, its related to bands avalible on your phone
for instance, my carrier uses B1-2100mhz and b8-900mhz for 3g. My phone doesnt work on 900mhz 3g so i disabled it
now i got full lte and 3g(H+) all the time
try disabling one of them and see for yourself
Click to expand...
Click to collapse
Hmm,I haven't tried disabling bands, I'll try that although I'm phone must have gotten damaged because even a stock deep flash didn't fix it
its hardware related
Jure_aleksic said:
its hardware related
Click to expand...
Click to collapse
I have no choice but to believe that but I wonder how I never mistreat this phone and I never even dropped it before it still in a very tough case
its xiaomi's fault
btw u can enable lte bands if they are missing
Nothing worked, Well I guess my phone is broken. And I have to spend money I don't have to buy an new one[emoji34] do I even want to buy another xiaomi phone with this unplanned error.
Hi everyone. I have a Leeco Pro 3 X727. I am on Firmware 20s I am having issues to get 4G/LTE signal.
First thing, In my City there is 4G signal, even a couple a days ago I went to my carrier and change my Sim for the newset, just in case.
The last Rom where I had LTE signal IICR was AEX5.4 around May's days. After I changed to CDroid, then to DotsOS... Whatever all I can get its H+ signal. Couple a days ago I change to Carbon Rom 6.1 (Oreos) and the first install, in the configuration I get LTE, but after change to Wifi for finish install all apps, I cant get LTE again. I flashed back Dots, Cdroid and I am now and AEX5.7 and I I have the same issue, just 3G/H+, not LTE or 4G. Also, after flashing firmware 20S I get LTE signal for a While so I think that is not the problem...
I tried almost all APN setting and Nothing. Chang Rom, change Recovery, change Kernel... Nothing just 3g/H+.... My friends with same Carrier have LTE signal...
So, is there anything I can do...? Flash any app, setting?
Help please.
kukuteku said:
Hi everyone. I have a Leeco Pro 3 X727. I am on Firmware 20s I am having issues to get 4G/LTE signal.
First thing, In my City there is 4G signal, even a couple a days ago I went to my carrier and change my Sim for the newset, just in case.
The last Rom where I had LTE signal IICR was AEX5.4 around May's days. After I changed to CDroid, then to DotsOS... Whatever all I can get its H+ signal. Couple a days ago I change to Carbon Rom 6.1 (Oreos) and the first install, in the configuration I get LTE, but after change to Wifi for finish install all apps, I cant get LTE again. I flashed back Dots, Cdroid and I am now and AEX5.7 and I I have the same issue, just 3G/H+, not LTE or 4G. Also, after flashing firmware 20S I get LTE signal for a While so I think that is not the problem...
I tried almost all APN setting and Nothing. Chang Rom, change Recovery, change Kernel... Nothing just 3g/H+.... My friends with same Carrier have LTE signal...
So, is there anything I can do...? Flash any app, setting?
Help please.
Click to expand...
Click to collapse
Only use the X7272 5.8.20s firmware - Then you should be able to get it with the correct APN and setting
Don't choose Global, you want the LTE/GSM/UMTS/CDMA setting. If you are still having issues, use the program LTE Discovery or Network Guru.
There are Magsisk
What network are you trying to connect to? What country are you in?
Go to Settings -> Backup & reset -> Network settings reset -> RESET SETTINGS
xBane_ said:
What network are you trying to connect to? What country are you in?
Click to expand...
Click to collapse
Dominican Republic.
Orange / Altice
tsongming said:
Only use the X7272 5.8.20s firmware - Then you should be able to get it with the correct APN and setting
Don't choose Global, you want the LTE/GSM/UMTS/CDMA setting. If you are still having issues, use the program LTE Discovery or Network Guru.
There are Magsisk
Click to expand...
Click to collapse
I am Root.
None works.
fivefour said:
Go to Settings -> Backup & reset -> Network settings reset -> RESET SETTINGS
Click to expand...
Click to collapse
Nothing. Still "Orange 3G" and conexión icon show H+.
Honestly, I'd say something is wrong with your phone or wrong with your cell towers. The only LTE Band that Orange/Altice supports in DR is B3 (sorta strange that there's only one band, but for a relatively small country I suppose it doesn't matter) and the LEX727 and LEX720 both have band 3, as well as the only GSM(3g)/UMTS(4g) bands that Orange/Altice supports (that being GSM:1800/1900 and UMTS B8 (900GSM)) At first my assumption was that Orange/Altice was a CDMA network, but as far as I can see, there are no CDMA networks in DR!
Edit: download the speedtest app, and see if you're getting the same speeds as a phone that shows it's connected to LTE. If you are, there's no issue besides the phone reporting the connection wrong. If you're slower, though...
xBane_ said:
Honestly, I'd say something is wrong with your phone or wrong with your cell towers. The only LTE Band that Orange/Altice supports in DR is B3 (sorta strange that there's only one band, but for a relatively small country I suppose it doesn't matter) and the LEX727 and LEX720 both have band 3, as well as the only GSM(3g)/UMTS(4g) bands that Orange/Altice supports (that being GSM:1800/1900 and UMTS B8 (900GSM)) At first my assumption was that Orange/Altice was a CDMA network, but as far as I can see, there are no CDMA networks in DR!
Edit: download the speedtest app, and see if you're getting the same speeds as a phone that shows it's connected to LTE. If you are, there's no issue besides the phone reporting the connection wrong. If you're slower, though...
Click to expand...
Click to collapse
Maybe the problem is Orange Altice. The 4G coverage its very new in my city. I al ready tested speed and its 3G 5mb/3mb
Thanks for answering!
kukuteku said:
Maybe the problem is Orange Altice. The 4G coverage its very new in my city. I al ready tested speed and its 3G 5mb/3mb
Thanks for answering!
Click to expand...
Click to collapse
Oh! I think I know the issue! When I looked at Orange's website (trying to find network specs, which strangely for a network that supports BYOD, they don't have listed, or at least I couldn't find it) I saw that they have subscribers pay for data, as is standard practice in the US (where I live). But the thing that caught my eye is that you also pay for speed.
So... Let me take a guess here. You pay either RD$1499 Or RD$1349 for their 5mbps unlimited plan?
Basically, my assumption is that if you're paying for one of their lower speed tiers, they put you on a 4g or 3g network to save LTE bandwidth for the people who pay more than you.
Tell me if any of this sounds familiar... I feel like I may've found your problem!
xBane_ said:
Oh! I think I know the issue! When I looked at Orange's website (trying to find network specs, which strangely for a network that supports BYOD, they don't have listed, or at least I couldn't find it) I saw that they have subscribers pay for data, as is standard practice in the US (where I live). But the thing that caught my eye is that you also pay for speed.
So... Let me take a guess here. You pay either RD$1499 Or RD$1349 for their 5mbps unlimited plan?
Basically, my assumption is that if you're paying for one of their lower speed tiers, they put you on a 4g or 3g network to save LTE bandwidth for the people who pay more than you.
Tell me if any of this sounds familiar... I feel like I may've found your problem!
Click to expand...
Click to collapse
Mmmmm suspect ... actually I have an even lower plan, RD $ 580 (USD$12) and I only use the data when I buy additional packages ... Most times I use Wi-Fi and just use Data when I am not at home/job and the 3G its veeeery looooow speed... Thank bro, that could be the problem.