Database Users

Please Closed... / Lost IMEI

Hello.
my DROID Turbo Lost IMEI...
The cause was me, but did the following operation.
Code:
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
fastboot erase mdm1m9kefs3
fastboot erase mdm1m9kefsc
The reasons that performed this are as follows.
When I reset NV with past Motorola device, I deleted efs (modemst1/modemst2)
I did a thing similar to it....
After having carried it out, it was understood, but the content of the partition seems to be as follows.
mdm1m9kefs1 = modemst1
mdm1m9kefs2 = modemst2
mdm1m9kefs3 = fsg.mbn
mdm1m9kefsc = ?
by the above,,, I want mdm1m9kefs3(fsg.mbn) and mdm1m9kefsc
fsg.mbn is always in official motorola firmware, but does not into the thing of quark which I downloaded
Te methods to take out are as follows
※req rooted
Code:
adb shell
su
# dd if=/dev/block/mmcblk0p31 of=/sdcard/p31
# dd if=/dev/block/mmcblk0p32 of=/sdcard/p32
exit
adb pull /sdcard/p31
adb pull /sdcard/p32
thanks ;(

sorry.....
sorry.
It was not necessary........
radio.img was in Quark XT1254 firmware which I downloaded.
When I looked in radio.img in HEX Editor, it was bundled.
Because flash was possible with Bootloader Locked, it was repaired!!!!
I am sorry for my impatience.
--------------- thread closed ---------------

fnoji111 said:
sorry.
It was not necessary........
radio.img was in Quark XT1254 firmware which I downloaded.
When I looked in radio.img in HEX Editor, it was bundled.
Because flash was possible with Bootloader Locked, it was repaired!!!!
I am sorry for my impatience.
--------------- thread closed ---------------
Click to expand...
Click to collapse
imei number 0000 or null ???

cascade128 said:
imei number 0000 or null ???
Click to expand...
Click to collapse
null.

fnoji111 said:
null.
Click to expand...
Click to collapse
How did you fix it?

cascade128 said:
How did you fix it?
Click to expand...
Click to collapse
He flashed radio.img which restored the partitions and his IMEI.

Steve-x said:
He flashed radio.img which restored the partitions and his IMEI.
Click to expand...
Click to collapse
I tried, imei number still null

????
how they lost their imei, we was doing?

cascade128 said:
I tried, imei number still null
Click to expand...
Click to collapse
You device is Moto Maxx XT1225?
The motorola model thinks that there is not fatal IMEI Null such as Galaxy Phone basically...
(It is a supposition by the experience)
Are you not repaired if you perform a flash of radio.img?
exp RETLA_XT1225_4.4.4_KXG21.50-9_cid12_subsidy-DEFAULT_CFC.xml.zip etc...
probably... It cannot work even if flash radio.img of verizon model
and
delete these two partition from fastboot.
Code:
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2

fnoji111 said:
You device is Moto Maxx XT1225?
The motorola model thinks that there is not fatal IMEI Null such as Galaxy Phone basically...
(It is a supposition by the experience)
Are you not repaired if you perform a flash of radio.img?
exp RETLA_XT1225_4.4.4_KXG21.50-9_cid12_subsidy-DEFAULT_CFC.xml.zip etc...
probably... It cannot work even if flash radio.img of verizon model
and
delete these two partition from fastboot.
Code:
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
Click to expand...
Click to collapse
No, my device XT1254

i Have fastboot erase modem modemst1 modemst2 and i don't have backup

i have earsed modem , modemst1 , modemst2 using fastboot without taking a backup any ideas how to restore or does any one have a backup thanks

saifo11 said:
i have earsed modem , modemst1 , modemst2 using fastboot without taking a backup any ideas how to restore or does any one have a backup thanks
Click to expand...
Click to collapse
First you should have a custom recovery (e.g. TWRP) installed, if not, flash using fastboot. Then download and flash any ROM. You can find a lot of them easily in the A6000 sub forum here at XDA.

sasukay said:
First you should have a custom recovery (e.g. TWRP) installed, if not, flash using fastboot. Then download and flash any ROM. You can find a lot of them easily in the A6000 sub forum here at XDA.
Click to expand...
Click to collapse
i have flashed alot of roms but no luck , is there a backup for modemst1 and modemst2

saifo11 said:
i have flashed alot of roms but no luck , is there a backup for modemst1 and modemst2
Click to expand...
Click to collapse
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.

EFS_Lenovo_A6000.qcn
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
EFS_Lenovo_A6000.qcn does this file need to be flashed

saifo11 said:
EFS_Lenovo_A6000.qcn does this file need to be flashed
Click to expand...
Click to collapse
No, actually I didn't created the zip and I don't know what it contained. But, as the zip name suggests, "modem and stuff", I thought it would contain the modemst1/st2 .bin files; and didn't know what else it would contain. So, you just have to flash the modemst1/st2 files and not any others. But, in case, you lost your IMEI too, after flashing the files; I suggested that thread to help you out with it.

sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
the post you provided worked thanks alot

what is this for? will this fix the bad signal on my carbon kitkat rom?

sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
Hello Sasukay..
Can you pls provide the link for downloading the modem files for lenovo k3 note. Or will this same file fix my network issues??

shamanth_gowda said:
Can you pls provide the link for downloading the modem files for lenovo k3 note.
Click to expand...
Click to collapse
Got this MODEM FIRMWARE FILES for LENOVO K3 Note on Lenovo K3 Note forum. I don't know if it works, but you can try flashing this patch, maybe it will.

sasukay said:
Got this MODEM FIRMWARE FILES for LENOVO K3 Note on Lenovo K3 Note forum. I don't know if it works, but you can try flashing this patch, maybe it will.
Click to expand...
Click to collapse
The link you provided is not opening

shamanth_gowda said:
The link you provided is not opening
Click to expand...
Click to collapse
https://drive.google.com/drive/u/0/...JhY0ZoakdUZW4xYXVjRGVzNnpuR21naWtVN1IxMTFQZ1U

sasukay said:
https://drive.google.com/drive/u/0/...JhY0ZoakdUZW4xYXVjRGVzNnpuR21naWtVN1IxMTFQZ1U
Click to expand...
Click to collapse
Thank you for the new link. But unfortunately this is not helping me in getting my signal back on my k3 note.
Please suggest me a solution.
Thanks in advance

shamanth_gowda said:
Thank you for the new link. But unfortunately this is not helping me in getting my signal back on my k3 note.
Please suggest me a solution.
Thanks in advance
Click to expand...
Click to collapse
I have K6 Power (K33A42) and also erased the modemst1 and -st2 parts. Could anybody share his backup of modemst1?
Flashing newest stock ROM did not helped.
Please...

I have created bcn file with my imei no but my device not recognized by my laptop is there any other method I can flash bcn file

sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
Unfortunatelly my K6 Power did not find modem partition during fastboot flashing... Is there any other method to flash this files?

doswar said:
I have created bcn file with my imei no but my device not recognized by my laptop is there any other method I can flash bcn file
Click to expand...
Click to collapse
Last time I checked it was qcn.?!! And to restore the qcn backup one has to boot the device into Qualcomm Diagnostic Mode and then restore the qcn backup using QPST software. You need qualcomm serial port drivers installed on your pc for your device to get detected.
mL-7 said:
Unfortunatelly my K6 Power did not find modem partition during fastboot flashing... Is there any other method to flash this files?
Click to expand...
Click to collapse
The modem partition could have been renamed with some other name, but it must be there. The files I provided were intended to be used on Lenonvo K3 Note and not K6 Power. So even if the files were flashed, they wouldn't have helped. Check Lenovo K6 Power sub forum there's this link to qcn file for Lenovo K6 Power which might come handy.
Good luck to both. I won't be able to help you with anything else now. GTG. I'm busy.

sasukay said:
Last time I checked it was qcn.?!! And to restore the qcn backup one has to boot the device into Qualcomm Diagnostic Mode and then restore the qcn backup using QPST software. You need qualcomm serial port drivers installed on your pc for your device to get detected.
The modem partition could have been renamed with some other name, but it must be there. The files I provided were intended to be used on Lenonvo K3 Note and not K6 Power. So even if the files were flashed, they wouldn't have helped. Check Lenovo K6 Power sub forum there's this link to qcn file for Lenovo K6 Power which might come handy.
Good luck to both. I won't be able to help you with anything else now. GTG. I'm busy.
Click to expand...
Click to collapse
sorry for mistake it's qcn but where I can get drivers

doswar said:
sorry for mistake it's qcn but where I can get drivers
Click to expand...
Click to collapse
Qualcomm USB drivers
Was just a google search away.

sasukay said:
Qualcomm USB drivers
Was just a google search away.
Click to expand...
Click to collapse
Thank you

Developers please help for resolve problem of sim 2 imei 0

because of modem update in hydrogen os 2.5 this whole mess starts pls help

Rohanlovely said:
because of modem update in hydrogen os 2.5 this whole mess starts pls help
Click to expand...
Click to collapse
This new modem firmware is quite unstable, I advise you against using it. My solution to get working second SIM was to restore OOS 3.1 modem and format modemst1, modemst2 and persist partitions. Not until after formatting the partitions did it work again (CM14 keept rebooting/crashing).

pitrus- said:
This new modem firmware is quite unstable, I advise you against using it. My solution to get working second SIM was to restore OOS 3.1 modem and format modemst1, modemst2 and persist partitions. Not until after formatting the partitions did it work again (CM14 keept rebooting/crashing).
Click to expand...
Click to collapse
How u got back the sim 2 working ?

pitrus- said:
This new modem firmware is quite unstable, I advise you against using it. My solution to get working second SIM was to restore OOS 3.1 modem and format modemst1, modemst2 and persist partitions. Not until after formatting the partitions did it work again (CM14 keept rebooting/crashing).
Click to expand...
Click to collapse
how do you format the partitions? through TWRP? so steps are, flash oos 3.1 then format the modemst1 and 2?

Rohandd said:
how do you format the partitions? through TWRP? so steps are, flash oos 3.1 then format the modemst1 and 2?
Click to expand...
Click to collapse
Sim 2 start working after that ?? U tried that ?

Like I said, both SIM cards work again after flashing OOS 3.1 ROM (or firmware files manually) and then using the ordinary fastboot format command to format modemst1 and modemst2, then used fastboot flash persist persist.img with the persist partition dump found in this forum.

pitrus- said:
Like I said, both SIM cards work again after flashing OOS 3.1 ROM (or firmware files manually) and then using the ordinary fastboot format command to format modemst1 and modemst2, then used fastboot flash persist persist.img with the persist partition dump found in this forum.
Click to expand...
Click to collapse
could you please list out the exact steps you have done to fix your issue?
there are many users who are getting this issue including me.
please list the steps with the links of files you flashed. it would be a great help.

​
pitrus- said:
Like I said, both SIM cards work again after flashing OOS 3.1 ROM (or firmware files manually) and then using the ordinary fastboot format command to format modemst1 and modemst2, then used fastboot flash persist persist.img with the persist partition dump found in this forum.
Click to expand...
Click to collapse

https://drive.google.com/file/d/0B9IqSEI0OM37RTM5M09Ib180U0E/view
I got it
Persist.img for oneplus 2?

Rohanlovely said:
https://drive.google.com/file/d/0B9IqSEI0OM37RTM5M09Ib180U0E/view
I got it
Persist.img for oneplus 2
Click to expand...
Click to collapse
Did you tried with this??
any fix??

ashu01 said:
Did you tried with this??
any fix??
Click to expand...
Click to collapse
My laptop windows crashed after repairing that i will try

Rohanlovely said:
My laptop windows crashed after repairing that i will try
Click to expand...
Click to collapse
can you join this telegram group link
https://telegram.me/joinchat/CbL5zUA-vInKg1B5M8baqQ

Had the same problem
Hi,
Just to give you all a quick background. I was in the same situation as you. Flashed H2OS didn't like the jumpy signal therefore wanted to go back to OOS.
First boot of OOS resulted in no connectivity (no wifi, no data, no Bluetooth). I followed the method above and deleted modemst1 and modemst2 and formatted modemst (all done thru fastboot)
Once I did that I was able to boot into OOS to get the signals. As petris said above, wiping and then booting into the software results in a fresh re-write of those modem partitions.
At this point I factory resetted the OOS software (just to be safe) and also installed the stock recovery (somehow my device wasn't booting into TWRP everytime I installed it).
After the factory reset I checked my IMEI's and saw my IMEI2 as 0. Luckily I don't use slot 2 so getting it to show IMEI wasn't a priority. However my camera wasn't working. Everytime I opened up the camera it would show a black screen for 30 seconds and then close with a message showing "Unknown error"
At this point I tried searching the persist.img file that someone suggested in this thread. I downloaded that from google drive and clean flashed it thru fastboot.
After a reboot I was able to get the camera working again.
So all in all for now everything works as expected. I am on the latest OOS 3.1.0 software and have no intentions of doing anything else until there is fix for IMEI2. I am regularly checking oneplus forums where people like me have esclated the issues. I think on the recognized developers Naman is working for a fix and seeing into this issue.
TLDR : IMEI2 shows 0

ashu01 said:
can you join this telegram group link
https://telegram.me/joinchat/CbL5zUA-vInKg1B5M8baqQ
Click to expand...
Click to collapse
now new is problem started in my mobile telegram guys i able start d 2nd sim in my mobile but now sim 1 imei is 0

Rohanlovely said:
https://drive.google.com/file/d/0B9IqSEI0OM37RTM5M09Ib180U0E/view
I got it
Persist.img for oneplus 2
Click to expand...
Click to collapse
u tried it? works?

lockmunk said:
u tried it? works?
Click to expand...
Click to collapse
I tried and was fine.
First i did full wipe, then flash this zip + any rom and rom started fine.

pitrus- said:
Like I said, both SIM cards work again after flashing OOS 3.1 ROM (or firmware files manually) and then using the ordinary fastboot format command to format modemst1 and modemst2, then used fastboot flash persist persist.img with the persist partition dump found in this forum.
Click to expand...
Click to collapse
I get this error while trying to format modem
formatting 'modemst1' partition... Formatting is not supported for filesystem with type ''. FAILED ()
---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------
rajatdixit said:
Hi,
Just to give you all a quick background. I was in the same situation as you. Flashed H2OS didn't like the jumpy signal therefore wanted to go back to OOS.
First boot of OOS resulted in no connectivity (no wifi, no data, no Bluetooth). I followed the method above and deleted modemst1 and modemst2 and formatted modemst (all done thru fastboot)
Once I did that I was able to boot into OOS to get the signals. As petris said above, wiping and then booting into the software results in a fresh re-write of those modem partitions.
At this point I factory resetted the OOS software (just to be safe) and also installed the stock recovery (somehow my device wasn't booting into TWRP everytime I installed it).
After the factory reset I checked my IMEI's and saw my IMEI2 as 0. Luckily I don't use slot 2 so getting it to show IMEI wasn't a priority. However my camera wasn't working. Everytime I opened up the camera it would show a black screen for 30 seconds and then close with a message showing "Unknown error"
At this point I tried searching the persist.img file that someone suggested in this thread. I downloaded that from google drive and clean flashed it thru fastboot.
After a reboot I was able to get the camera working again.
So all in all for now everything works as expected. I am on the latest OOS 3.1.0 software and have no intentions of doing anything else until there is fix for IMEI2. I am regularly checking oneplus forums where people like me have esclated the issues. I think on the recognized developers Naman is working for a fix and seeing into this issue.
TLDR : IMEI2 shows 0
Click to expand...
Click to collapse
Did u get such type of an error:
formatting 'modemst1' partition... Formatting is not supported for filesystem with type ''. FAILED ()
If not just tel me the steps u followed

ashokmor007 said:
I get this error while trying to format modem
formatting 'modemst1' partition... Formatting is not supported for filesystem with type ''. FAILED ()
---------- Post added at 07:45 PM ---------- Previous post was at 07:43 PM ----------
Did u get such type of an error:
formatting 'modemst1' partition... Formatting is not supported for filesystem with type ''. FAILED ()
If not just tel me the steps u followed
Click to expand...
Click to collapse
Make sure your bootloader is unlocked

rajatdixit said:
Make sure your bootloader is unlocked
Click to expand...
Click to collapse
yes it is unlocked

Help me save my e4

I made a huge mistake and flashed a keystore to my keymaster partition on my motorola e4 and now it won't boot anymore. Surprisingly fastboot let me flash it but won't let me erase. I know how to fix it but need a keymaster partition backup from an E4 the same as mine. I guess this isn't included in stock firmware flashed through fastboot. Can someone with a rooted TMobile E4 help me by running a command and posting the outputted .img here so I can fix my E4?
Command I need
Code:
dd if=/dev/block/bootdevice/by-name/keymaster of=/sdcard/keymaster.img
Keymasterbak for good measure?
Code:
dd if=/dev/block/bootdevice/by-name/keymasterbak of=/sdcard/keymasterbak.img

Geofferey said:
I made a huge mistake and flashed a keystore to my keymaster partition on my motorola e4 and now it won't boot anymore. Surprisingly fastboot let me flash it but won't let me erase. I know how to fix it but need a keymaster partition backup from an E4 the same as mine. I guess this isn't included in stock firmware flashed through fastboot. Can someone with a rooted TMobile E4 help me by running a command and posting the outputted .img here so I can fix my E4
Click to expand...
Click to collapse
Will a MetroPCS one do?
Sent from my Asus P027 using XDA Labs

xt1768 imei 0

I picked up a Moto E4 (perry) xt1768 for Lineage OS. I don't know if it was something I did (one of my earlier builds failed to boot) or was already like that, but I found out after I put in a SIM when Lineage 14.1 seemed to be otherwise running OK, that the phone says IMEI is 0, radio is off, and won't connect to network. fastboot getvars does show a reasonable value but no ROM I have tried can see it.
I searched for possible fixes, tried reflashing stock with and without SIM inserted etc, but so far nothing I tried has helped. Any new ideas?

aaopt said:
I picked up a Moto E4 (perry) xt1768 for Lineage OS. I don't know if it was something I did (one of my earlier builds failed to boot) or was already like that, but I found out after I put in a SIM when Lineage 14.1 seemed to be otherwise running OK, that the phone says IMEI is 0, radio is off, and won't connect to network. fastboot getvars does show a reasonable value but no ROM I have tried can see it.
I searched for possible fixes, tried reflashing stock with and without SIM inserted etc, but so far nothing I tried has helped. Any new ideas?
Click to expand...
Click to collapse
Try
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Sent from my mata using XDA Labs

sd_shadow said:
Try
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
Thanks for responding but I guess my multiple attempts to flash to stock already included those commands. Only thing is that the flash script has fsg before modemst1/2, but I presume the order should not matter.

aaopt said:
Thanks for responding but I guess my multiple attempts to flash to stock already included those commands. Only thing is that the flash script has fsg before modemst1/2, but I presume the order should not matter.
Click to expand...
Click to collapse
It does matter
Sent from my Moto E (4) using Tapatalk

aaopt said:
I picked up a Moto E4 (perry) xt1768 for Lineage OS. I don't know if it was something I did (one of my earlier builds failed to boot) or was already like that, but I found out after I put in a SIM when Lineage 14.1 seemed to be otherwise running OK, that the phone says IMEI is 0, radio is off, and won't connect to network. fastboot getvars does show a reasonable value but no ROM I have tried can see it.
I searched for possible fixes, tried reflashing stock with and without SIM inserted etc, but so far nothing I tried has helped. Any new ideas?
Click to expand...
Click to collapse
Hi
have a look here
[allaboutflashing-dot c o m /motorola-e4-mediatek-xt1762-imei-repair-without-box-free-solution/]

Hi,
I have the same problem with XT1768//Moto E4 Amazon prime one // bootloader locked // Qualcomm Snapdragon chip.
It's my wife phone, issue(null imei) appear out of the blue...
I did try the above fastboot commands with files got from here: https://firmwarefile.co/flash-file-motorola-moto-e4-xt1768-firmware-download-stock-rom/
but without success...same null IMEI.
Do you have any ideas how to fix the Qualcomm E4 ? thanks