Hello.
my DROID Turbo Lost IMEI...
The cause was me, but did the following operation.
Code:
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
fastboot erase mdm1m9kefs3
fastboot erase mdm1m9kefsc
The reasons that performed this are as follows.
When I reset NV with past Motorola device, I deleted efs (modemst1/modemst2)
I did a thing similar to it....
After having carried it out, it was understood, but the content of the partition seems to be as follows.
mdm1m9kefs1 = modemst1
mdm1m9kefs2 = modemst2
mdm1m9kefs3 = fsg.mbn
mdm1m9kefsc = ?
by the above,,, I want mdm1m9kefs3(fsg.mbn) and mdm1m9kefsc
fsg.mbn is always in official motorola firmware, but does not into the thing of quark which I downloaded
Te methods to take out are as follows
※req rooted
Code:
adb shell
su
# dd if=/dev/block/mmcblk0p31 of=/sdcard/p31
# dd if=/dev/block/mmcblk0p32 of=/sdcard/p32
exit
adb pull /sdcard/p31
adb pull /sdcard/p32
thanks ;(
sorry.....
sorry.
It was not necessary........
radio.img was in Quark XT1254 firmware which I downloaded.
When I looked in radio.img in HEX Editor, it was bundled.
Because flash was possible with Bootloader Locked, it was repaired!!!!
I am sorry for my impatience.
--------------- thread closed ---------------
fnoji111 said:
sorry.
It was not necessary........
radio.img was in Quark XT1254 firmware which I downloaded.
When I looked in radio.img in HEX Editor, it was bundled.
Because flash was possible with Bootloader Locked, it was repaired!!!!
I am sorry for my impatience.
--------------- thread closed ---------------
Click to expand...
Click to collapse
imei number 0000 or null ???
cascade128 said:
imei number 0000 or null ???
Click to expand...
Click to collapse
null.
fnoji111 said:
null.
Click to expand...
Click to collapse
How did you fix it?
cascade128 said:
How did you fix it?
Click to expand...
Click to collapse
He flashed radio.img which restored the partitions and his IMEI.
Steve-x said:
He flashed radio.img which restored the partitions and his IMEI.
Click to expand...
Click to collapse
I tried, imei number still null
????
how they lost their imei, we was doing?
cascade128 said:
I tried, imei number still null
Click to expand...
Click to collapse
You device is Moto Maxx XT1225?
The motorola model thinks that there is not fatal IMEI Null such as Galaxy Phone basically...
(It is a supposition by the experience)
Are you not repaired if you perform a flash of radio.img?
exp RETLA_XT1225_4.4.4_KXG21.50-9_cid12_subsidy-DEFAULT_CFC.xml.zip etc...
probably... It cannot work even if flash radio.img of verizon model
and
delete these two partition from fastboot.
Code:
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
fnoji111 said:
You device is Moto Maxx XT1225?
The motorola model thinks that there is not fatal IMEI Null such as Galaxy Phone basically...
(It is a supposition by the experience)
Are you not repaired if you perform a flash of radio.img?
exp RETLA_XT1225_4.4.4_KXG21.50-9_cid12_subsidy-DEFAULT_CFC.xml.zip etc...
probably... It cannot work even if flash radio.img of verizon model
and
delete these two partition from fastboot.
Code:
fastboot erase mdm1m9kefs1
fastboot erase mdm1m9kefs2
Click to expand...
Click to collapse
No, my device XT1254
Related
Haven't seen it around here, so I thought sharing is caring:
Image of Lollipop 5.0 RETEUALL for XT1092 version LXE22.46-19
DOWNLOAD http://motofirmware.com/files/file/1055-reteuall-xt1092-50-lxe2246-19-cid7-cfcxmlzip/
Enjoy!
How to flash (taken from https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images and modified)
After downloading the image for your device:
Unzip the image.
Put your device in fastboot mode. [e.g. by using "$ fastboot reboot"]
NOTE: You must use the Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory). Please do NOT use the Android fastboot utility [better known as "mfastboot.exe" - so you probably change the command "fastboot" to "mfastboot"]
Follow the flashing steps in the .xml file that was included in the package.
A typical flashing sequence includes all these partitions, but might vary depending on your product - so please use the sequence in the .xml file in your package:
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img_sparsechunk.0
$ fastboot flash system system.img_sparsechunk.1
$ fastboot flash system system.img_sparsechunk.2
$ fastboot flash system system.img_sparsechunk.3
$ fastboot flash system system.img_sparsechunk.4
$ fastboot flash system system.img_sparsechunk.5
$ fastboot flash system system.img_sparsechunk.6
$ fastboot flash system system.img_sparsechunk.7
$ fastboot flash modem NON-HLOS.bin
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot erase customize [leave that out if you have special customization from motomaker]
$ fastboot erase clogo [leave that out if you have special customization from motomaker]
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
Click to expand...
Click to collapse
If you don't know how to flash it - don't! I am not responsible if anything goes wrong!
Whats the method to flash this ?
willy_907 said:
Whats the method to flash this ?
Click to expand...
Click to collapse
added a quick tutorial from motorola with a few modifications and notes.
Hi good afternoon , I Flashed with RSD LITE , and perfect. thank you very much
regards
Is there anyone who would be able to get hold of Motorola signed images? That would be aweosme.
Many thanks for this too
subhramani said:
Is there anyone who would be able to get hold of Motorola signed images? That would be aweosme.
Many thanks for this too
Click to expand...
Click to collapse
What would be the use for this? For devices without an unlockable bootloader? Just curious why this wouldn't suffice.
It will be useful when you want to lock the bootloader back again.
I'm sure you'll want it if you were from a country like mine.
subhramani said:
It will be useful when you want to lock the bootloader back again.
I'm sure you'll want it if you were from a country like mine.
Click to expand...
Click to collapse
Once you request for the unlock code and unlock the bootloader of your device its done, relocking won't help you to claim warranty if the service center guy looks it up.
nithin1992 said:
Once you request for the unlock code and unlock the bootloader of your device its done, relocking won't help you to claim warranty if the service center guy looks it up.
Click to expand...
Click to collapse
Worth keeping it justin case right?
I think it's time to finally unlock the bootloader of my phone, now I have the factory firmware for my model and variant
Thanks for this.
How to know if mine is RETEUALL or other?
Thanks
Edit: solved thanks
Hi, thanks for the upload.
I have a question, as my device is XT1092, the european version. But my carrier, Orange Spain, sells the Moto X unlocked, or they say so, and my phone version goes by 21.21.45.victara_oraeu.oraeuall.en.EU oraes. Should I be able to flash the ROM? I have experience doing so, so my question is just this one.
Thanks.
Yes, you can flash this image.
I myself flashed it on my French Orange Moto X (orafr).
-iNSiGhT- said:
Yes, you can flash this image.
I myself flashed it on my French Orange Moto X (orafr).
Click to expand...
Click to collapse
Good to know, thanks!
I'm pretty sure I flashed this file on my Orange Moto X but I still have "orafr" after "22.21.19.victara_reteu.reteuall.en.eu".
Is it the same for you ?
ichi go said:
Good to know, thanks!
I'm pretty sure I flashed this file on my Orange Moto X but I still have "orafr" after "22.21.19.victara_reteu.reteuall.en.eu".
Is it the same for you ?
Click to expand...
Click to collapse
I have that too, but since i flashed the retail modem (modem and fsg files) i think the "orafr" is related to the efs partition (something we don't "touch" during the flash process.
-iNSiGhT- said:
I have that too, but since i flashed the retail modem (modem and fsg files) i think the "orafr" is related to the efs partition (something we dont "touch" during the flash process.
Click to expand...
Click to collapse
OK, you're probably right.
Thanks for your answer.
NVM Posted in the wrong thread.
Hello to All
Can someone give me a good link to the mg file, the link is broken...
Thank you
cesarium said:
Hello to All
Can someone give me a good link to the mg file, the link is broken...
Thank you
Click to expand...
Click to collapse
http://www.androidgb.com/download-moto-x-2nd-gen-2014-android-5-0-lollipop-factory-image-784/
Nicolae-Daniel said:
http://www.androidgb.com/download-moto-x-2nd-gen-2014-android-5-0-lollipop-factory-image-784/
Click to expand...
Click to collapse
was searching for the 5.0 stock cause each time i've downgraded to stock 4.4.4 and OTA'd to the latest.. and it was timeboggling!
Thank you!
Hello, since i had gps issues i've reflashed the modem on adb and then erased modemst like this:
mfastboot flash modem [email protected]@[email protected]@NON-HLOS-64bit.bin
fastboot erase modemst1
fastboot erase modemst2
So the gps seems to be ok now, but the phone data is stuck on edge, and if i force 3g from the settings it doesn't connect at all
so i've putted stock recovery , wiped all data and installed a complete stock update but with no luck.
anyone have some idea?
EDIT: i've noticed that i don't have imei anymore... how to restore it?
reddevilx said:
Hello, since i had gps issues i've reflashed the modem on adb and then erased modemst like this:
mfastboot flash modem [email protected]@[email protected]@NON-HLOS-64bit.bin
fastboot erase modemst1
fastboot erase modemst2
So the gps seems to be ok now, but the phone data is stuck on edge, and if i force 3g from the settings it doesn't connect at all
so i've putted stock recovery , wiped all data and installed a complete stock update but with no luck.
anyone have some idea?
EDIT: i've noticed that i don't have imei anymore... how to restore it?
Click to expand...
Click to collapse
This is only a theory.
You need to else another rooted device ze550kl.
Commands for new device:
adb shell
su
cat /dev/block/mmcblk0p16 > /mnt/sdcard/modemst1.img
cat /dev/block/mmcblk0p17 > /mnt/sdcard/modemst2.img
Commands for old device:
adb reboot bootloader
fastboot flash modemst1 modemst1.img
fastboot flash modemst2 modemst2.img
The way to "/dev/block/mmcblk0p16" and "/dev/block/mmcblk0p17" is for a device ze500kl. I do not know to way for your device ze550kl.
Thank you Muminek111,
i've tried but with no luck, i've copied and flashed mmcblk0p16 and mmcblk0p17, the files exists but it doesn't change anything.
reddevilx said:
Thank you Muminek111,
i've tried but with no luck, i've copied and flashed mmcblk0p16 and mmcblk0p17, the files exists but it doesn't change anything.
Click to expand...
Click to collapse
I do not know if your device ze550kl has "modemst1" partition name "mmcblk0p16". It's the name for ze500kl device. You have to search in folder dev/block/............ I have the names in folder dev/block/platform/soc.0/7824900.sdhci/by-name.
You can flash back modem partition if you will know the name. The name of my modem partition is mmcblk0p38.
I don't understand;
this is the /dev/block/platform/7824900.sdhci
http://pastebin.com/Ebit7VFJ
this is /dev/block/platform/7824900.sdhci/by-name
http://pastebin.com/fx8FbBdU
modem is p35, modemst1 is p36 and modemst2 is p37?
i think i'm making a mistake because doing so i have a huge modemst2
i also don't understand why restoring a full twrp backup doesn't solve it
reddevilx said:
I don't understand;
this is the /dev/block/platform/7824900.sdhci
http://pastebin.com/Ebit7VFJ
this is /dev/block/platform/7824900.sdhci/by-name
http://pastebin.com/fx8FbBdU
modem is p35, modemst1 is p36 and modemst2 is p37?
i think i'm making a mistake because doing so i have a huge modemst2
i also don't understand why restoring a full twrp backup doesn't solve it
Click to expand...
Click to collapse
I think that the twrp recovery doesn't backs up all partitions.
This are my screenshots the folders from an apk Total Commander.
https://drive.google.com/file/d/0B7F3ZXr565GkYWJJT1ByX0VqQTQ/view?usp=drivesdk
https://drive.google.com/file/d/0B7F3ZXr565GkdXFxSVluSHAzUXM/view?usp=drivesdk
But everything shows to the folder dev/block/
Therefore is the command cat /dev/block/.......... > /mnt/sdcard/modemst1.img
OK, so now with total commander i found that
Modem is 41
Modemst1 is 18
Modemst2 is 19
i've flashed the new ones but i'm still with null imei.
Thank you anyway i've learned something new
You should back up the partition before every command erase partition.
I've made a backup from a working phone but it doesn't work, i think that the board may be faulty.
Thank you anyway
Hi all,
By mistakenly i run the command "fastboot clear all" on my moto x play (XT1562) Dual Sim,
Now IMEI number showing 0 so i am not able to register to a network because of this no calls/sms.
I done research on this and tried with by flashing custom ROM nothing works, then i went to moto x play service center they said need to change motherboard so i came back.
now i am fully confused
please anyone help me how to get back my IMEI number. and i run the getvar command in the information i am able to see my original IMEI number but when i dial *#06# both the IMEI number shows 0.
please plz... help me how i can solve this.
Thanks
About ur imei soln
Nmurthy2692 said:
Hi all,
By mistakenly i run the command "fastboot clear all" on my moto x play (XT1562) Dual Sim,
Now IMEI number showing 0 so i am not able to register to a network because of this no calls/sms.
I done research on this and tried with by flashing custom ROM nothing works, then i went to moto x play service center they said need to change motherboard so i came back.
now i am fully confused
please anyone help me how to get back my IMEI number. and i run the getvar command in the information i am able to see my original IMEI number but when i dial *#06# both the IMEI number shows 0.
please plz... help me how i can solve this.
Thanks
Click to expand...
Click to collapse
i hav similar problem few days back(moto x play xt 1562 imei 0)....moto care said i want to replace my motherboard which is very costly. so one of my frnds frnd resolve this problem..u cn whtsapp me on +918381086001 for further details..like to help u bye
Nmurthy2692 said:
Hi all,
By mistakenly i run the command "fastboot clear all" on my moto x play (XT1562) Dual Sim,
Thanks
Click to expand...
Click to collapse
First of all: don't listen anyone about replacing mainboard e.t.c.
Try to reflash your phone with latest factory firmware via RSD Lite or manually in fastboot mode. Then perform a factory reset and boot your smartphone into Android.
Hope it will help you.
Follow flashing instructions in this thread:
https://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
Download stock firmware here:
https://github.com/motoxplay/stock
Good luck!
summer.cat said:
First of all: don't listen anyone about replacing mainboard e.t.c.
Good luck!
Click to expand...
Click to collapse
Hi Thank you for your valuable time providing to solve my problem.
I tried flashing custom rom as you suggested ,
ROM Version which i download : XT1562_LUX_RETASIA_DS_6.0.1_MPDS24.107-52-5.xml
flashed it on fastboot mode still not showing any network and IMEI also 0.
I re-flash the modem by running these commands
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
then also same problem.
by the way while flashing 1st time i removed sim card from the phone and after flashing ROM i inserted sim card.
2nd time i did not removed sim card from the phone and tried flashing stock rom both the ways not working for me.
Please help me whats happening with my phone.
Thank you.
Nmurthy2692 said:
Hi Thank you for your valuable time providing to solve my problem.
I tried flashing custom rom as you suggested ,
ROM Version which i download : XT1562_LUX_RETASIA_DS_6.0.1_MPDS24.107-52-5.xml
flashed it on fastboot mode still not showing any network and IMEI also 0.
I re-flash the modem by running these commands
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
then also same problem.
by the way while flashing 1st time i removed sim card from the phone and after flashing ROM i inserted sim card.
2nd time i did not removed sim card from the phone and tried flashing stock rom both the ways not working for me.
Please help me whats happening with my phone.
Thank you.
Click to expand...
Click to collapse
Try these
http://www.androidbrick.com/ultimat...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
http://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-imei-baseband-repair-fix-part-2/
Solution
Nmurthy2692 said:
Hi Thank you for your valuable time providing to solve my problem.
I tried flashing custom rom as you suggested ,
ROM Version which i download : XT1562_LUX_RETASIA_DS_6.0.1_MPDS24.107-52-5.xml
flashed it on fastboot mode still not showing any network and IMEI also 0.
I re-flash the modem by running these commands
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
then also same problem.
by the way while flashing 1st time i removed sim card from the phone and after flashing ROM i inserted sim card.
2nd time i did not removed sim card from the phone and tried flashing stock rom both the ways not working for me.
Please help me whats happening with my phone.
Thank you.
Click to expand...
Click to collapse
Can u reach me..if ur problem does not get solved I cn help feel free to contact 9975877687..bye
I have a similar unsolved problem here:
https://forum.xda-developers.com/mot...mei-0-t3857049
---------- Post added at 06:07 PM ---------- Previous post was at 06:03 PM ----------
Has a definitive solution been found to all this?
I also accidentally run the ****ing command "fastboot erase all"
Motorola could not make protected partitions as on other phones to avoid these accidents? holy ****..
Use the following commands and flash the stock given in the below link.
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Link:- https://github.com/motoxplay/stock
Is this issue solved ?
I know the thread is old but I believe i can help.
adukale said:
Is this issue solved ?
I know the thread is old but I believe i can help.
Click to expand...
Click to collapse
Hey, I've been trying to fix my imei on my mxp, but I've tried the solutions in this thread already and it doesn't seem to work. Can you please help me?
i downloaded factory image of 7.12.29 oreo
i used flash_factory.bat
it reflashed partitioning
apparently it had a command "fastboot flash modem_a NON-HLOS.bin"
the NON-HLOS.bin file does not exist in images folder nor in any fastboot rom
now i dont have any connectivity... signal.. wifi etc..
can anybody provide NON-HLOS.bin file for the A1
Hello,
Inside the fastboot ROM file "tissot_images_7.12.19_20171219.0000.00_7.1_d39fa89aaf.tgz" (Nougat 7.1.2) ... in the file "flash_all_lock_crc.bat" for example, these lines appear:
fastboot %* flash modem_a %~dp0images\modem.img || @ECHO "Flash modem_a error" && exit /B 1
fastboot %* flash modem_b %~dp0images\modem.img || @ECHO "Flash modem_b error" && exit /B 1
It seems that the file is called "modem.img", not "NON-HLOS.bin".
May be?
Regards!
PS: Sorry for my English!
i managed to flash all images from fast boot to partitions manually step by step
except something called fsg and persist partitions
which i managed to flash through twrp using dd command via terminal
now it boots but i dont have imei number "says imei number unknown"
and it reboots after less than a minute
i read something about qcn file restore and editing from another mi A1
and that i can edit it to put my imei numbers back
anybody please provide a valid qcn number and how can i restore it
m.hashem said:
i managed to flash all images from fast boot to partitions manually step by step
except something called fsg and persist partitions
which i managed to flash through twrp using dd command via terminal
now it boots but i dont have imei number "says imei number unknown"
and it reboots after less than a minute
i read something about qcn file restore and editing from another mi A1
and that i can edit it to put my imei numbers back
anybody please provide a valid qcn number and how can i restore it
Click to expand...
Click to collapse
if it is under warranty just brick your phone and give it to service centre they will flash it and give you back
m.hashem said:
i downloaded factory image of 7.12.29 oreo
i used flash_factory.bat
it reflashed partitioning
apparently it had a command "fastboot flash modem_a NON-HLOS.bin"
the NON-HLOS.bin file does not exist in images folder nor in any fastboot rom
now i dont have any connectivity... signal.. wifi etc..
can anybody provide NON-HLOS.bin file for the A1
Click to expand...
Click to collapse
i have same problem last night
then i reflash 7.12.19 using miflash 2016.08.30.0
my imei normal again
Wow! The file NON-HLOS.bin is the modem for other Xiaomi phone. May be you use a batch file (flash_factory.bat) for other phone, not Mi A1. Please use Mi Flash with right rom.
this is method not working
bangir said:
i have same problem last night
then i reflash 7.12.19 using miflash 2016.08.30.0
my imei normal again
Click to expand...
Click to collapse
this is method not working
gautamaurya said:
this is method not working
Click to expand...
Click to collapse
What happens if you try to re-flash your modem with the flash_all or flash_all_except_storage scripts from here: https://forum.xda-developers.com/mi-a1/how-to/ota-official-fastboot-image-n2g47h-7-12-t3728929 ?
Can you please report, if it works and if should not work, please attach the terminal/ shell outpout of the failed flashing attempt here.
modemst1 and modemst2
hey ... i managed to flash the fastboot rom via miflash via hsusb 9008 mode through miflash tool (run as administrator)
the remainig problem is 2 partitions modemst1 and modemst2
which are dev/block/mmcblk0p14 & 15 respectively
can somebody please send me a backup of modemst1 and modemst2
it's doable via twrp
fastboot boot twrp3.1.1.1.img
advanced
terminal
dd if=/dev/block/mmcblk0p14 of=/sdcard/modemst1.img
dd if=/dev/block/mmcblk0p15 of=/sdcard/modemst2.img
i'll flash them back and edit the imei numbers via hex after qcn backup
thanks everybody
m.hashem said:
hey ... i managed to flash the fastboot rom via miflash via hsusb 9008 mode through miflash tool (run as administrator)
the remainig problem is 2 partitions modemst1 and modemst2
which are dev/block/mmcblk0p14 & 15 respectively
can somebody please send me a backup of modemst1 and modemst2
it's doable via twrp
fastboot boot twrp3.1.1.1.img
advanced
terminal
dd if=/dev/block/mmcblk0p14 of=/sdcard/modemst1.img
dd if=/dev/block/mmcblk0p15 of=/sdcard/modemst2.img
i'll flash them back and edit the imei numbers via hex after qcn backup
thanks everybody
Click to expand...
Click to collapse
I have done some digging in order to assist you to get this fixed. I think I have 2 very hot leads (untested as I don't have any issues with my IMEI):
1. http://www.androidbrick.com/ultimat...agon-xiaomi-mi5-imei-and-baseband-repair-fix/ & http://www.androidbrick.com/ultimate-guide-qualcomm-snapdragon-imei-baseband-repair-fix-part-2/
2. https://androidmtk.com/use-qualcomm-smartphone-write-imei-tool (looks almost to easy, but worth a try?)
Please report your feedback here
hey bro how to the editting modem1st.img
m.hashem said:
i downloaded factory image of 7.12.29 oreo
i used flash_factory.bat
it reflashed partitioning
now i dont have any connectivity... signal.. wifi etc..
Click to expand...
Click to collapse
Hello!
I made the same mistake. Is there a way to solve this problem?
m.hashem said:
i downloaded factory image of 7.12.29 oreo
i used flash_factory.bat
it reflashed partitioning
apparently it had a command "fastboot flash modem_a NON-HLOS.bin"
the NON-HLOS.bin file does not exist in images folder nor in any fastboot rom
now i dont have any connectivity... signal.. wifi etc..
can anybody provide NON-HLOS.bin file for the A1
Click to expand...
Click to collapse
Same problem here. Phone doesn't work correctly now. Boots, freezes and reboots. :crying:
persist image problem
https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/
try ghis to restore persist img from twrp see if it fixes the freeze and reboot problem
also download the persist.img from the guide not from a fastboot rom... it should be 32 mb in size
i actually bricked my phone via doing fastboot flash partition partition-both-gpt.bin from fastboot folder then fastvoot reboot.... warning this bricks the phone completely... theres no bootloader now... i gave it to service center... ill take my chances for replacement
m.hashem said:
https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/
try ghis to restore persist img from twrp see if it fixes the freeze and reboot problem
also download the persist.img from the guide not from a fastboot rom... it should be 32 mb in size
i actually bricked my phone via doing fastboot flash partition partition-both-gpt.bin from fastboot folder then fastvoot reboot.... warning this bricks the phone completely... theres no bootloader now... i gave it to service center... ill take my chances for replacement
Click to expand...
Click to collapse
thank you very much broo my device is fixed freezee and reboots problem
Ok. But what is the persist partition? Someone tried already? Doesn't want to brick my phone completely.
how to the editting qcn file beacuse my imei 0 null please help me editting brother
m.hashem said:
https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/
try ghis to restore persist img from twrp see if it fixes the freeze and reboot problem
also download the persist.img from the guide not from a fastboot rom... it should be 32 mb in size
i actually bricked my phone via doing fastboot flash partition partition-both-gpt.bin from fastboot folder then fastvoot reboot.... warning this bricks the phone completely... theres no bootloader now... i gave it to service center... ill take my chances for replacement
Click to expand...
Click to collapse
The freeze and reboot problem is fixed. Thanks. Still one problem. IMEI1 is 0 and IMEI2 is null. Anyone has an idea?
Nordland_ua said:
Hello!
I made the same mistake. Is there a way to solve this problem?
Click to expand...
Click to collapse
Me tooo
Sent from my Mi A1 using Tapatalk
https://www.androidfilehost.com/?fid=673956719939818468
Replace the IMEi with UR Own IMEI . if not it's illegal to use this QCN
Password : testnreport
if you don't know how to change IMEI Using hex editor , try my method . DO NOT use QCN to restore .
(hex and imei provided in order for u to find n replace)
i lost my imei n spent me about 6days n 8 hours per day to find a way to fix it .
actually it's easy to fix the problem .
My own method
1. download the older rom (7.8.23) Link
2. Use flash_all.bat
3.reboot into fastboot mode , erase modemst1 and modemst2 .
fastboot erase modemst1
fastboot erase modemst2
4. reboot
5. go to phone , enter *#*#717717#*#*
6.got to settings enable USB Debugging (ADB)
7. disconnect your phone n connect it back
8.Use WriteDualIMEI(W+G_eMMC) Remember run as administrator , enter your IMEI .
9.if success , go to phone enter *#*#717717#*#* to disable the diag port
10. reboot
Done .
Hello friends, well, I have a problem with my moto g5 plus, the IMEI is at 0 and the IMEI SV is also at 0, I already tried the Pixel experience 8.1.0 method and nothing, also other methods that I have seen on the internet but both IMEI follow in 0, any solution to the problem?
I would appreciate it
DrakonMann said:
Hello friends, well, I have a problem with my moto g5 plus, the IMEI is at 0 and the IMEI SV is also at 0, I already tried the Pixel experience 8.1.0 method and nothing, also other methods that I have seen on the internet but both IMEI follow in 0, any solution to the problem?
I would appreciate it
Click to expand...
Click to collapse
Have you ever flashed someone else's persist file?
Sent from my Moto G5 Plus using XDA Labs
Wolfcity said:
Have you ever flashed someone else's persist file?
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
unfortunately yes, I restored a backup of a treble rom and then I saw that had persist and EFS
DrakonMann said:
unfortunately yes, I restored a backup of a treble rom and then I saw that had persist and EFS
Click to expand...
Click to collapse
Try flashing from from stock firmware
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
sd_shadow said:
Try flashing from from stock firmware
Code:
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
Click to expand...
Click to collapse
I tried and it didn't work :/
DrakonMann said:
unfortunately yes, I restored a backup of a treble rom and then I saw that had persist and EFS
Click to expand...
Click to collapse
In this case you're most probably screwed if you don't have a backup of your own persist file.
All infos about this problem can be found here. @NZedPred who made that thread is the man to ask but do not have to much hope.
https://forum.xda-developers.com/g5-plus/how-to/fix-persist-resolve-imei0-explanation-t3825147
Sent from my Moto G5 Plus using XDA Labs
Wolfcity said:
In this case you're most probably screwed if you don't have a backup of your own persist file.
All infos about this problem can be found here. @NZedPred who made that thread is the man to ask but do not have to much hope.
https://forum.xda-developers.com/g5-plus/how-to/fix-persist-resolve-imei0-explanation-t3825147
Sent from my Moto G5 Plus using XDA Labs
Click to expand...
Click to collapse
**** man, i dont have backup of my efs & persist, well, i check this thread, thnks man.