Related
Really do not know where to put this as some mantnce to this section needs to be done.
this is to go back in stock for new 2015 4G LTE t-mo phones
if you ever need this , very probably your phone is already unlocked and rooted.
you need to know basic fastboot precedure
and use this file posted in other forum
http://motofirmware.center/files/category/51-moto-e-4g-2nd-generation/
select the SURNIA RETUS xml file
download to your PC and extract in same folder togheter with fastboot comands files
reboot your phone in fastboot mode
flash these cmd in order:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot oem config carrier tmo
fastboot oem fb_mode_clear
fastboot reboot
your are done your phone is in original state
you will have back the bootloader unlock status warning again
hope it helps somebody else
Hi there. Just one question that can't let me alone, can i flash this if my phone is from another region? The model i have is the XT1527, i unlocked the bootloader, but i prefer to use the Tmobile version, as i have it with a moto x 2nd gen.
My phone is 4g LTE of course, but the question that if other region can be flashed is not clear to me... hope you can help me if you know anything about it, thanks.
Arturo777 said:
Hi there. Just one question that can't let me alone, can i flash this if my phone is from another region? The model i have is the XT1527, i unlocked the bootloader, but i prefer to use the Tmobile version, as i have it with a moto x 2nd gen.
My phone is 4g LTE of course, but the question that if other region can be flashed is not clear to me... hope you can help me if you know anything about it, thanks.
Click to expand...
Click to collapse
it should work if hardware is compatible.....now they have lollipo 5.1 just uploaded
...i dont'n know about wifi and network signal....but if you have unlocked your bootloader you can always flash original firmware back (make sure is availble as xml file)
Help, please.
Should I flash this like any other ROM? I live in Colombia, would that affect the cellphone networks or anything? I have the XT1527.
so flashing t-mobile would enable wifi calling?
From every where , i'm getting this link to download the factory image of MotoG4Plus XT1643 (indian version) :
-- can not paste Entire link here as i don't have 10 posts. Still , here's the link with / replaced by ' ' :
filefactoryfile 6jgqz4jlyiyj G4_XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml.zip
However , for some reason my ISP has blocked the site.
Can anyone who has this file upload it to drive or some other folder ? Or give me some other link ?
Or , if anyone has a nandroid backup of their phone via twrp , can you send me that ?
I badly need to get my phone working by today , ASAP.
Thanks a lot !
-> Story : I wanted to move to CyanogenMod13 , so i did a backup of my phone via twrp and wiped it clean. However , i forgot to move backup to laptop , and now i don't have any backup. Plus, in CM13 i can not receive any phone calls.
varun196 said:
From every where , i'm getting this link to download the factory image of MotoG4Plus XT1643 (indian version) :
-- can not paste Entire link here as i don't have 10 posts. Still , here's the link with / replaced by ' ' :
filefactoryfile 6jgqz4jlyiyj G4_XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml.zip
However , for some reason my ISP has blocked the site.
Can anyone who has this file upload it to drive or some other folder ? Or give me some other link ?
Or , if anyone has a nandroid backup of their phone via twrp , can you send me that ?
I badly need to get my phone working by today , ASAP.
Thanks a lot !
-> Story : I wanted to move to CyanogenMod13 , so i did a backup of my phone via twrp and wiped it clean. However , i forgot to move backup to laptop , and now i don't have any backup. Plus, in CM13 i can not receive any phone calls.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?a=show&w=files&flid=72578. Go to this page and download firmware named amz. This is the correct firmware for indian varient..
Hi ! thanks a lot for that !
In the meantime , i found a link to XT1643. and i installed it , everything works fine , except that my baseband is unknown. Is there any way to restore just the baseband info ? cause everything else works fine.
I'm on a slow net plan , and if i can just fix that part , i will be saved from downloading 1Gb software all over again.
varun196 said:
Hi ! thanks a lot for that !
In the meantime , i found a link to XT1643. and i installed it , everything works fine , except that my baseband is unknown. Is there any way to restore just the baseband info ? cause everything else works fine.
I'm on a slow net plan , and if i can just fix that part , i will be saved from downloading 1Gb software all over again.
Click to expand...
Click to collapse
Flash the above rom mentioned in the link.They rom you flashed previously would have been of other region.the above link is correct for xt1643 indian variant.
anhoxhrs said:
Flash the above rom mentioned in the link.They rom you flashed previously would have been of other region.the above link is correct for xt1643 indian variant.
Click to expand...
Click to collapse
Hello !
i can not find how to flash the amz .tgz file : twrp does not recognize the file ,
and in the file there are no sparsechunks which i can install unlike in the american version.
I followed the commands below to install
G4_XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml.zip
And since then i'm having my baseband unknown. I'm trying to re run the same commands , but now from the amz folder's data , but no avail. Can someone identify the problem ? :
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
varun196 said:
Hello !
i can not find how to flash the amz .tgz file : twrp does not recognize the file ,
and in the file there are no sparsechunks which i can install unlike in the american version.
I followed the commands below to install
G4_XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml.zip
And since then i'm having my baseband unknown. I'm trying to re run the same commands , but now from the amz folder's data , but no avail. Can someone identify the problem ? :
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Flash this rom throughe adb https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/view
Thank you everyone ! I was able to get my phone working by using the amz link , and slightly modifying some of the commands i listed above.
varun196 said:
Thank you everyone ! I was able to get my phone working by using the amz link , and slightly modifying some of the commands i listed above.
Click to expand...
Click to collapse
What did you modify?i dint see any mistake.
anhoxhrs said:
What did you modify?i dint see any mistake.
Click to expand...
Click to collapse
The steps were not for indian version. In the amz - indian version , you can not simply follow all the steps : a few (~2) files are not there , and there are no chunks. I was making some mistake before , but next time got it correct.
I did the same but my wifi is not working now. Dont have my laptop also with me. Is there a flashable zip available?
Sent from my Moto G (4) using Tapatalk
Garry1313 said:
I did the same but my wifi is not working now. Dont have my laptop also with me. Is there a flashable zip available?
Click to expand...
Click to collapse
Stock moto roms are not in flashable zip format.You may have flashed the wrong rom on yout device.Like you have a g4 of us and flash firmware of the uk model.
varun196 said:
The steps were not for indian version. In the amz - indian version , you can not simply follow all the steps : a few (~2) files are not there , and there are no chunks. I was making some mistake before , but next time got it correct.
Click to expand...
Click to collapse
what did you modify i also have moto g4 plus and i have flashed it now my fingerprint doesnt work hmm
I got my phone working https://drive.google.com/file/d/0B1N6dGU7FEXsSjR3QUtsRU1RTVk/view
by using this rom, thanks guys.
Hi,
I was flashing many different ROMs in attempt to find a solution to something I was trying to accomplish. In the end, I gave up and decided to go back to stock. I used this instruction to revert back to stock: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
I followed the instruction under Android 6.0, MPH24.49-18-3 FIRMWARE that said to do:
fastboot flash partition gpt.bin
fastboot reboot bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
I remember when flashing system, there was an invalid sparse header message, but it kept going, so I let it. After that I rebooted bootloader and flashed TWRP again. I then rebooted bootloader once more and entered TWRP. There, I proceeded normally. But then I realized that there was something wrong when I couldn't do the full wipe. I went to look in the mount setting and saw that TWRP was not able to mount internal. The internal was also listed as 0MB. I'm guessing that I need to re-partition/format the internal (or I don't know what I'm talking about lol). Either way, I'm now unable to flash a ROM. Can someone please help me?
Thank you in advance.
try http://forum.xda-developers.com/moto-x-style/development/windows-tool-moto-x-style-pure-edition-t3199905
then flash android 6.0 maybe trupure 2.9 and then get the modem from trupure and flash it
goldentequila said:
Hi,
I was flashing many different ROMs in attempt to find a solution to something I was trying to accomplish. In the end, I gave up and decided to go back to stock. I used this instruction to revert back to stock: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
I followed the instruction under Android 6.0, MPH24.49-18-3 FIRMWARE that said to do:
fastboot flash partition gpt.bin
fastboot reboot bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
I remember when flashing system, there was an invalid sparse header message, but it kept going, so I let it. After that I rebooted bootloader and flashed TWRP again. I then rebooted bootloader once more and entered TWRP. There, I proceeded normally. But then I realized that there was something wrong when I couldn't do the full wipe. I went to look in the mount setting and saw that TWRP was not able to mount internal. The internal was also listed as 0MB. I'm guessing that I need to re-partition/format the internal (or I don't know what I'm talking about lol). Either way, I'm now unable to flash a ROM. Can someone please help me?
Thank you in advance.
Click to expand...
Click to collapse
Its incomplete comanda... Where is the main spunk files??
These are the main firmware files
---------- Post added at 04:06 PM ---------- Previous post was at 04:00 PM ----------
goldentequila said:
Hi,
I was flashing many different ROMs in attempt to find a solution to something I was trying to accomplish. In the end, I gave up and decided to go back to stock. I used this instruction to revert back to stock: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
I followed the instruction under Android 6.0, MPH24.49-18-3 FIRMWARE that said to do:
fastboot flash partition gpt.bin
fastboot reboot bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
I remember when flashing system, there was an invalid sparse header message, but it kept going, so I let it. After that I rebooted bootloader and flashed TWRP again. I then rebooted bootloader once more and entered TWRP. There, I proceeded normally. But then I realized that there was something wrong when I couldn't do the full wipe. I went to look in the mount setting and saw that TWRP was not able to mount internal. The internal was also listed as 0MB. I'm guessing that I need to re-partition/format the internal (or I don't know what I'm talking about lol). Either way, I'm now unable to flash a ROM. Can someone please help me?
Thank you in advance.
Click to expand...
Click to collapse
Its incomplete comanda... Where is the main spunk files??
These are the main firmware files
Check all the files that u have flashed
goldentequila said:
Hi,
I was flashing many different ROMs in attempt to find a solution to something I was trying to accomplish. In the end, I gave up and decided to go back to stock. I used this instruction to revert back to stock: http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
I followed the instruction under Android 6.0, MPH24.49-18-3 FIRMWARE that said to do:
fastboot flash partition gpt.bin
fastboot reboot bootloader
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
I remember when flashing system, there was an invalid sparse header message, but it kept going, so I let it. After that I rebooted bootloader and flashed TWRP again. I then rebooted bootloader once more and entered TWRP. There, I proceeded normally. But then I realized that there was something wrong when I couldn't do the full wipe. I went to look in the mount setting and saw that TWRP was not able to mount internal. The internal was also listed as 0MB. I'm guessing that I need to re-partition/format the internal (or I don't know what I'm talking about lol). Either way, I'm now unable to flash a ROM. Can someone please help me?
Thank you in advance.
Click to expand...
Click to collapse
Find 18-4 firmware, it's newer anyway... the sparse chunk size error is the problem, the system.img file in that firmware file is too large for the phone to flash via fastboot (thus, it probably isn't an official image, or it's an image for the engineering flash tool, not fastboot). The proper image file with have 6-11 sparce chunks you need to flash individually.
acejavelin said:
Find 18-4 firmware, it's newer anyway... the sparse chunk size error is the problem, the system.img file in that firmware file is too large for the phone to flash via fastboot (thus, it probably isn't an official image, or it's an image for the engineering flash tool, not fastboot). The proper image file with have 6-11 sparce chunks you need to flash individually.
Click to expand...
Click to collapse
I think i made it worse lol... Because I was getting many errors (random reboots), I decided to do a full wipe to install a ROM fresh. When wiping in TWRP, I accidentally wiped "internal" too. I'm guessing that I need to do something to correct this before I can flash 18-4 firmware. Please let me know if you know what I need to do. Thank you.
goldentequila said:
I think i made it worse lol... Because I was getting many errors (random reboots), I decided to do a full wipe to install a ROM fresh. When wiping in TWRP, I accidentally wiped "internal" too. I'm guessing that I need to do something to correct this before I can flash 18-4 firmware. Please let me know if you know what I need to do. Thank you.
Click to expand...
Click to collapse
TWRP shouldn't be a part of this, nor should it matter whats on your internal storage, this is all done with fastboot.
Factory reset in stock recovery, reboot to bootloader, then flash the complete image with fastboot.
Sagar_1401 said:
Its incomplete comanda... Where is the main spunk files??
These are the main firmware files
---------- Post added at 04:06 PM ---------- Previous post was at 04:00 PM ----------
Its incomplete comanda... Where is the main spunk files??
These are the main firmware files
Check all the files that u have flashed
Click to expand...
Click to collapse
The instruction in that post said to not worry about the sparse error message, so I went with it. This is what the post said.
"You may notice a "sparse header error" when flashing at the beginning. Don't worry about it, all is well. The current AutoFlashFirmware.bat file doesn't work with this Firmware file. Flash the files manually!"
Also, i posted above too, but I just accidentally wiped internal via TWRP too. Do you know what I need to do now in order to get my phone back? I've found solutions for other phones regarding this situation, but I haven't come across one for Moto X Pure. This is what happens when you work on your phone all day long and some more into late night lol...
acejavelin said:
TWRP shouldn't be a part of this, nor should it matter whats on your internal storage, this is all done with fastboot.
Factory reset in stock recovery, reboot to bootloader, then flash the complete image with fastboot.
Click to expand...
Click to collapse
Thank you for your ongoing support. I just want to make sure I'm doing this right. I found this firmware: http://forum.xda-developers.com/showpost.php?p=69103575&postcount=243
Could you please tell me if you think that's what I should flash?
Also, if you don't mind, will you please share exact fastboot commands/process? I just don't want to make any more mistakes and make things worse. I apologize for being needy.
goldentequila said:
Thank you for your ongoing support. I just want to make sure I'm doing this right. I found this firmware: http://forum.xda-developers.com/showpost.php?p=69103575&postcount=243
Could you please tell me if you think that's what I should flash?
Also, if you don't mind, will you please share exact fastboot commands/process? I just don't want to make any more mistakes and make things worse. I apologize for being needy.
Click to expand...
Click to collapse
Yes, look in my signature and use the non-relock option: http://forum.xda-developers.com/mot...de-return-to-stock-relock-bootloader-t3489110
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
acejavelin said:
Yes, look in my signature and use the non-relock option: http://forum.xda-developers.com/mot...de-return-to-stock-relock-bootloader-t3489110
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Thank you very much for that. You mentioned that I would need to factory reset in stock recovery first. Do I just fastboot flash a stock recovery from the firmware zip file from 18-4, boot into its recovery, reset, and then follow the instruction above?
goldentequila said:
Thank you very much for that. You mentioned that I would need to factory reset in stock recovery first. Do I just fastboot flash a stock recovery from the firmware zip file from 18-4, boot into its recovery, reset, and then follow the instruction above?
Click to expand...
Click to collapse
Boot, flash, whatever... It is best to do a factory reset in the default recovery first, but it isn't essential.
acejavelin said:
Boot, flash, whatever... It is best to do a factory reset in the default recovery first, but it isn't essential.
Click to expand...
Click to collapse
Oh ok. Thanks again. I'll report back if I succeed (or not) later today. I appreciate your help.
acejavelin said:
Boot, flash, whatever... It is best to do a factory reset in the default recovery first, but it isn't essential.
Click to expand...
Click to collapse
Thank you so much for your help. It worked perfectly. Now I have my phone back :victory:
goldentequila said:
Thank you so much for your help. It worked perfectly. Now I have my phone back :victory:
Click to expand...
Click to collapse
Glad I could help. You're welcome.
Lol it was sparsechunk i just got confused with it and said spunk??
Hii !! How long will it take for the fastboot rom to arrive for Moto g4 plus Indian retail xt1643 ... With 1st Feb 2018 security patch ???
Vs1607 said:
Hii !! How long will it take for the fastboot rom to arrive for Moto g4 plus Indian retail xt1643 ... With 1st Feb 2018 security patch ???
Click to expand...
Click to collapse
https://drive.google.com/file/d/1qR9MUUQCNUQ6sAivz2OTkc4TW88vmszv/edit
Already available since a month.
smog2699 said:
https://drive.google.com/file/d/1qR9MUUQCNUQ6sAivz2OTkc4TW88vmszv/edit
Already available since a month.
Click to expand...
Click to collapse
Where'd you find it ?? I mean I've been searching this whole time and couldn't find it ?
.
.
.
Just curious ! ?
Vs1607 said:
Where'd you find it ?? I mean I've been searching this whole time and couldn't find it Just curious ! ?
Click to expand...
Click to collapse
It was posted in the forum at least three times.
thorin0815 said:
It was posted in the forum at least three times.
Click to expand...
Click to collapse
Hi thorin0815, Vs1607,
Just a off thread question. If a flash this image it will wipe the data? My issue is described on below link. Please help me.
https://forum.xda-developers.com/moto-g4-plus/help/stock-moto-g4-plus-getting-rebooted-t3781480
hardythaker said:
Hi thorin0815, Vs1607,
Just a off thread question. If a flash this image it will wipe the data? My issue is described on below link. Please help me.
https://forum.xda-developers.com/moto-g4-plus/help/stock-moto-g4-plus-getting-rebooted-t3781480
Click to expand...
Click to collapse
If you want to avoid wiping your data whilst flashing the fastboot stock ROM, you can omit the 'fastboot erase userdata' command and you do not have to re-lock your bootloader (re-locking will wipe your data).
However, if you are experiencing instabilities as you mentioned, a data wipe is a useful troubleshooting step, and may help you determine if your data is corrupted or whether you may have a more serious hardware/firmware issue.
echo92 said:
If you want to avoid wiping your data whilst flashing the fastboot stock ROM, you can omit the 'fastboot erase userdata' command and you do not have to re-lock your bootloader (re-locking will wipe your data).
However, if you are experiencing instabilities as you mentioned, a data wipe is a useful troubleshooting step, and may help you determine if your data is corrupted or whether you may have a more serious hardware/firmware issue.
Click to expand...
Click to collapse
Okay thanks for your comments. I will give it a try. Just one question is that the latest firmware. Because I had recently updated the ROM.
hardythaker said:
Okay thanks for your comments. I will give it a try. Just one question is that the latest firmware. Because I had recently updated the ROM.
Click to expand...
Click to collapse
NPJS25.93-14-15 as of writing is the latest firmware, Feb 2018 security patch. What ROM did you update to?
echo92 said:
NPJS25.93-14-15 as of writing is the latest firmware, Feb 2018 security patch. What ROM did you update to?
Click to expand...
Click to collapse
April ota is the last , but no one have it
leap_ahead said:
April ota is the last , but no one have it
Click to expand...
Click to collapse
Yeah the update note appears to be up but as you mentioned it's not been released yet to any channel. So for now the latest firmware we have is the Feb 2018 build.
echo92 said:
If you want to avoid wiping your data whilst flashing the fastboot stock ROM, you can omit the 'fastboot erase userdata' command and you do not have to re-lock your bootloader (re-locking will wipe your data).
However, if you are experiencing instabilities as you mentioned, a data wipe is a useful troubleshooting step, and may help you determine if your data is corrupted or whether you may have a more serious hardware/firmware issue.
Click to expand...
Click to collapse
Can i use this below commands. Also my bootloader is already locked, I have not unlocked the bootloader. Should I have to add any addtional command to above script like fastboot oem lock begin command.
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
[STRIKE]fastboot erase userdata[/STRIKE]
fastboot erase customize
fastboot erase clogo
fastboot reboot
hardythaker said:
Can i use this below commands. Also my bootloader is already locked, I have not unlocked the bootloader. Should I have to add any addtional command to above script like fastboot oem lock begin command.
<Snip>
Click to expand...
Click to collapse
Okay, as your bootloader is locked, there's no need for the OEM lock commands. Using them, regardless of if your bootloader is locked or not, will erase your data.
Those commands look okay, just ensure in your flashing script that you have that erase userdata command removed (not just struck out). Your command list a look like:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase customize
fastboot erase clogo
fastboot reboot
If this flash doesn't get your device going, you may have to wipe your data or consider a service repair as a locked bootloader gives us limited options for rescue.
echo92 said:
Okay, as your bootloader is locked, there's no need for the OEM lock commands. Using them, regardless of if your bootloader is locked or not, will erase your data.
Those commands look okay, just ensure in your flashing script that you have that erase userdata command removed (not just struck out). Your command list a look like:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase customize
fastboot erase clogo
fastboot reboot
If this flash doesn't get your device going, you may have to wipe your data or consider a service repair as a locked bootloader gives us limited options for rescue.
Click to expand...
Click to collapse
Thanks mate. Am going to flash this tomorrow. Will surely let you know the outcome. Anyway if all this allow me to use my phone at least for an hour, I will take the backup of the necessary data and then will proceed with wipe data/factory reset.
echo92 said:
Okay, as your bootloader is locked, there's no need for the OEM lock commands. Using them, regardless of if your bootloader is locked or not, will erase your data.
Those commands look okay, just ensure in your flashing script that you have that erase userdata command removed (not just struck out). Your command list a look like:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase customize
fastboot erase clogo
fastboot reboot
If this flash doesn't get your device going, you may have to wipe your data or consider a service repair as a locked bootloader gives us limited options for rescue.
Click to expand...
Click to collapse
Okay so I have flash the phone using above commands, but no luck, exact same issue is persists and even nothing has been changed on the phone, not even lock screen wallpaper.
So now do you have any more suggestion please let me know if not will proceed with Data Wipe. Also Even if I wipe user data and after that can I recover files using some Andrioid File Recovery Tools out there.
Waiting for your reply and will proceed as you will suggest. Thanks.
hardythaker said:
Okay so I have flash the phone using above commands, but no luck, exact same issue is persists and even nothing has been changed on the phone, not even lock screen wallpaper.
So now do you have any more suggestion please let me know if not will proceed with Data Wipe. Also Even if I wipe user data and after that can I recover files using some Andrioid File Recovery Tools out there.
Waiting for your reply and will proceed as you will suggest. Thanks.
Click to expand...
Click to collapse
That's not good, if a flash doesn't fix things.
1)Try to wipe your data via a factory reset. I think you can try to keep your internal storage by selecting to only wipe userdata in the stock recovery (boot to recovery, hold the power key then press the volume up key to get past the 'No Command screen', then under wipe data/factory reset, there should be an option to wipe userdata only). Then wipe cache/Dalvik in that same menu, and see if your device boots. I do not know if file recovery tools will work on non-rooted devices (due to restrictions on reading the data partition).
2)If that doesn't work, your device may have a serious hardware fault that only a service centre can resolve.
echo92 said:
That's not good, if a flash doesn't fix things.
1)Try to wipe your data via a factory reset. I think you can try to keep your internal storage by selecting to only wipe userdata in the stock recovery (boot to recovery, hold the power key then press the volume up key to get past the 'No Command screen', then under wipe data/factory reset, there should be an option to wipe userdata only). Then wipe cache/Dalvik in that same menu, and see if your device boots. I do not know if file recovery tools will work on non-rooted devices (due to restrictions on reading the data partition).
2)If that doesn't work, your device may have a serious hardware fault that only a service centre can resolve.
Click to expand...
Click to collapse
Okay so seems like am in serious trouble.
1) Done wipe data (user data only) with no luck.
2) Done wipe data with userdata and personalized content, still...
3) Flash stock ROM along with "Fastboot Erase userdata", but no joy.
Should I unlock the bootloader now and try to install TWRP and from there if I can go some where
And now I have kept the phone on Welcome Screen, its not getting rebooted, Am able to go till Select WIFI, even am able to connect to WIFI. Then on next screen it is asking me to "Accept Moto T&C", after that it will show me Checking Connectivity > Checking For Update > Checking Info.......and this is the point where it get restarted. Can you guess what is the issue, seems like its some network or connectivity hardware issue.
hardythaker said:
Okay so seems like am in serious trouble.
1) Done wipe data (user data only) with no luck.
2) Done wipe data with userdata and personalized content, still...
3) Flash stock ROM along with "Fastboot Erase userdata", but no joy.
Should I unlock the bootloader now and try to install TWRP and from there if I can go some where
And now I have kept the phone on Welcome Screen, its not getting rebooted, Am able to go till Select WIFI, even am able to connect to WIFI. Then on next screen it is asking me to "Accept Moto T&C", after that it will show me Checking Connectivity > Checking For Update > Checking Info.......and this is the point where it get restarted. Can you guess what is the issue, seems like its some network or connectivity hardware issue.
Click to expand...
Click to collapse
You'd only be able to unlock your bootloader if you enabled OEM unlocking in Settings>Developer Options, and you can only get to Developer Options if you can properly boot into the system (as a security measure)....
Hmm, if it's holding on the Setup Assistant now, can you use mobile data to set up instead of Wi-Fi? If it is an issue with the Wi-Fi, maybe using the mobile signal could get around that.
echo92 said:
You'd only be able to unlock your bootloader if you enabled OEM unlocking in Settings>Developer Options, and you can only get to Developer Options if you can properly boot into the system (as a security measure)....
Hmm, if it's holding on the Setup Assistant now, can you use mobile data to set up instead of Wi-Fi? If it is an issue with the Wi-Fi, maybe using the mobile signal could get around that.
Click to expand...
Click to collapse
Tried with mobile data too, but still same issue. Anyway am in service center now let's see what they say.
echo92 said:
You'd only be able to unlock your bootloader if you enabled OEM unlocking in Settings>Developer Options, and you can only get to Developer Options if you can properly boot into the system (as a security measure)....
Hmm, if it's holding on the Setup Assistant now, can you use mobile data to set up instead of Wi-Fi? If it is an issue with the Wi-Fi, maybe using the mobile signal could get around that.
Click to expand...
Click to collapse
Okay so after one-month of stupidity from service center and some other guys finally I myself resolved the issue.
1) Service center tried to flash the rom but didn't resolved the issue.
2) They changed the battery, but still the same issue.
3) They said that this is motherboard issue and it will cost 5200 INR.
Then gave my phone on yaantra .com to repair it they kept the phone for 5 days and said the same thing that it is a motherboard issue as network circuit is not working properly.
( In between this I end up buying OnePlus 6 :victory: :victory: )
Then I bought one new damaged phone in which motherboard was working fine. I replaced that motherboard with mine and still the same issue. After this I started disconnecting parts one by one which are there on display pannel. After checking speaker, vibrator, flash, when I disconnected the fingerprint sensor and rebooted the phone it was totally fine and no more reboots.
I never thought that a corrupted/damaged fingerprint scanner can do this kind of wired issue to a phone. .Now this will be a spare phone without fingerprint scanner. Thanks for your help @echo92
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
First I need to know which firmware exactly do you flashed on your device?
Baseband not found is normal...
WoKoschekk said:
First I need to know which firmware exactly do you flashed on your device?
Baseband not found is normal...
Click to expand...
Click to collapse
I'm not sure, can you tell me how to find it,
Sorry for being so stupid
Barb28n said:
I'm not sure, can you tell me how to find it,
Sorry for being so stupid
Click to expand...
Click to collapse
Ok... I guess you flashed the wrong firmware. But that's no problem. Just answer the questions below and you'll get a link to the correct firmware. Once you flash it your device will be fine again.
do you have a moto g6 plus?
where are you from? there are different firmwares
e.g. for Europe, India, etc.
It is the moto g6 plus, international version,
WoKoschekk said:
Ok... I guess you flashed the wrong firmware. But that's no problem. Just answer the questions below and you'll get a link to the correct firmware. Once you flash it your device will be fine again.
do you have a moto g6 plus?
where are you from? there are different firmwares
e.g. for Europe, India, etc.
Click to expand...
Click to collapse
It is the moto g6 plus, international version, bought from Amazon, Just wondering if I had the right firmware, and put it on the sd card,could I flash it from there? the bootloader is unlocked, but not rooted.
Thanks for any help
Barb28n said:
It is the moto g6 plus, international version, bought from Amazon, Just wondering if I had the right firmware, and put it on the sd card,could I flash it from there? the bootloader is unlocked, but not rooted.
Thanks for any help
Click to expand...
Click to collapse
No, you have to flash it via fastboot. However you can also try the Lenovo moto flash tool that does it for you
Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
What exactly have you done...? Do you know how to flash a new firmware or not??
---------- Post added at 05:53 AM ---------- Previous post was at 05:19 AM ----------
A little guide to get the correct firmware for your device:
1. go to fastboot mode
2. type the following command
Code:
fastboot getvar ro.carrier
the output will be:
Code:
ro.carrier: [I]your software channel[/I]
3. follow this link:
https://mirrors.lolinet.com/firmware/moto/evert/official/
and choose "your software channel"
(e.g. reteu / retail / retin, etc.)
4. download the latest firmware
***********************************************
How to flash a new firmware
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
But do not use the firmware from this page!!
!!Only use the firmware you downloaded in step 4. !!
juampapo546 said:
No, you have to flash it via fastboot. However you can also try the Lenovo moto flash tool that does it for you
Click to expand...
Click to collapse
Can you explain how to do that please, I think I tried the moto flash tool,and it couldn't find my phone.
Barb28n said:
Can you explain how to do that please, I think I tried the moto flash tool,and it couldn't find my phone.
Click to expand...
Click to collapse
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
WoKoschekk said:
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Click to expand...
Click to collapse
Thanks, I will try it, I have done it before,but not for a while. Trying to keep this a se
cret from Hubby as he will go ballistic!! LOL
WoKoschekk said:
https://forum.xda-developers.com/g6-plus/how-to/firmware-moto-g6-g6plus-t3789274
Click to expand...
Click to collapse
Thank you, thankyou, it worked, now I have to try and get rid of the warning message about the bootloader being unlocked, You are an absolute star !!!
Barb28n said:
Thank you, thankyou, it worked, now I have to try and get rid of the warning message about the bootloader being unlocked, You are an absolute star !!!
Click to expand...
Click to collapse
Download and extract the logo.zip attachment. It contains a logo.bin file. Copy logo.bin to /sdcard (internal storage), open terminal app and type:
Code:
su
dd if=/sdcard/logo.bin of=/dev/block/by-name/logo`getprop ro.boot.slot_suffix`
Reboot and enjoy your new logo!
On the top left corner you'll see the 'Verity mode is set to disabled' message which is quiet normal.
I am having the same exact problem as the OP (except I haven't done anything to my phone lately, it just ran out of battery, shut down, and went into endless bootloop after I charged it up).
I tried following the above instructions (my software channel is RETLA) and found two "latest" versions as of this posting (and both zip files were found identical by the diff command, as were their contents after I unzipped them)-- XT1926-6_EVERT_RETLA_SS_9.0_PPWS29.116-11-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and XT1926-7_EVERT_RETLA_DS_9.0_PPWS29.116-11-13_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip.
I tried flashing the XT1926-7 one and my phone is still in a boot loop. Since the other file is identical, I'm not expecting it to work either. So, which version of these firmwares is the correct one to use?
I thought that the point was that all these would work with a G6plus in the RETLA channel and some were just newer than others.
Thanks.
---------- Post added at 07:00 AM ---------- Previous post was at 06:07 AM ----------
I tried an earlier one, XT1926-7_EVERT_RETLA_DS_9.0_PPWS29.116-11-8_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip and got...
Can't load Android system. Your data may be corrupt. If you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device.
Click to expand...
Click to collapse
I went back to the earliest available 9.0 firmware, XT1926-7_EVERT_RETLA_9.0_PPW29.116-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip, flashed that, and still the above message.
Can anybody help?
Thanks.
---------- Post added at 07:03 AM ---------- Previous post was at 07:00 AM ----------
I do have TWRP installed on my SD card. Can that be used to unbrick the phone?
---------- Post added at 07:20 AM ---------- Previous post was at 07:03 AM ----------
...and wiping the cache from TWRP didn't fix it either -- still the same message about data being corrupt. Now I'm truly out of ideas.
Boot into fastboot mode to see which FW is the correct one for you.
Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
Well, i read this post and answers till the end, as it describes very well my problem, but no such solution, so if someone could help would be great !
The device is Moto G6 plus XT1926-8 and i still have all acess to fastboot, and recovery by pressing keys, i've already flashed this roms:
XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-18_subsidy-DEFAULT_regulatory-DEFAULT_CFC
XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-15_subsidy-DEFAULT_regulatory-DEFAULT_CFC
stockrom.net_XT1926-8_EVERT_RETBR_9.0_PPWS29.116-16-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC
in this order, but always got an infinite bootloop that sometime comes to inicial screens where you can click "start" set wifi, etc, but the device always restart no matter i click into it, or wait till a suposed "end" of restart rotine, that never came, always come to a restart showing my unlocked bootloader screen etc etc. I could suggest now try flashing a android 8 version rom, but for my experience, i have fear (not knowledge) that could something go wrong with radios and i finish not getting signal, so i came here looking for some help, if anyone knows something please help ! i will monitor this page so i can get any answer ! Thanks in advance !
ASPViTo said:
if anyone knows something please help ! i will monitor this page so i can get any answer ! Thanks in advance !
Click to expand...
Click to collapse
I've got some questions:
- did you flash Magisk or other tools like a "disable-dm_verity.zip"?
- userdata erased?
- correct boot slot?
Boot into recovery and try to "wipe (user)data". Maybe this will fix the bootloop.
Barb28n said:
Hi, I have looked for this problem, but cannot find any answers. I tried to flash a copy of the official rom on my phone, The bootloader is unlocked but not rooted. It seemed to go well, but now is on a permante startup loop.
I can get into fastboot and recovery, is there any way I can recover from this?
in fastboot it says baseband not found.
Any help will be really appreciated
Click to expand...
Click to collapse
WoKoschekk said:
I've got some questions:
- did you flash Magisk or other tools like a "disable-dm_verity.zip"?
- userdata erased?
- correct boot slot?
Boot into recovery and try to "wipe (user)data". Maybe this will fix the bootloop.
Click to expand...
Click to collapse
Hi bro, and thanks for the attention !
Answers: No, never used magisk. No other tools for root, if is this your question ! Only tool i have used is "Moto Auto Flash Tool v8.2 By Jamesjerss" that i used to unlock bootloader. All other flash process was done was using that list of commands everyone knows:
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash bluetooth BTFM.bin
mfastboot flash dsp dspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system_b system_other.img
mfastboot flash oem oem.img
mfastboot flash oem_b oem_other.img
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
mfastboot erase carrier
mfastboot erase userdata
mfastboot erase DDR
mfastboot oem fb_mode_clear
mfastboot reboot
About that command "mfastboot erase userdata" you mention,
I found that this command is always used in the list above "user data erased" was used on all tryes of flashsing!
- correct boot slot?
I dont know what you mean about, maybe something like "fix" boot slot, if so, no, i dont know how to do it, if you can provide a link for me to read about, i thank you, if there was a chance of the device stop this infinites restarts.
Boot into recovery and wipe all data, i did every flash attempt, that had fail, as way to recover the device, no sucess so far, phone stills rebooting to unlocked bootloader screen that goes to motorola logo, that goes to briefly entrance of welcome screen, or nor this, restart reboot again, i observed that after various tries it hangs alone and stills a black screen, that only goes out if i long press power button looking a forced shut off, but it doenst stays turned of, this restart process, restart again. Any clues or ideas ?
ASPViTo said:
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
Click to expand...
Click to collapse
Did you use exactly the same commands? Apart from the fact that you should count 0,1,2,3 and 4 your firmware has only two vendor.img sparse files.
WoKoschekk said:
Did you use exactly the same commands? Apart from the fact that you count 0,1,2,3 and 4 your firmware has only two vendor.img sparse files.
Click to expand...
Click to collapse
mfastboot getvar max-sparse-size
mfastboot oem fb_mode_set
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash modem NON-HLOS.bin
mfastboot flash fsg fsg.mbn
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash bluetooth BTFM.bin
mfastboot flash dsp dspso.bin
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
mfastboot flash system system.img_sparsechunk.8
mfastboot flash system system.img_sparsechunk.9
mfastboot flash system system.img_sparsechunk.10
mfastboot flash system system.img_sparsechunk.11
mfastboot flash system system.img_sparsechunk.12
mfastboot flash system_b system_other.img
mfastboot flash oem oem.img
mfastboot flash oem_b oem_other.img
mfastboot flash vendor vendor.img_sparsechunk.0
mfastboot flash vendor vendor.img_sparsechunk.1
mfastboot flash vendor vendor.img_sparsechunk.3
mfastboot flash vendor vendor.img_sparsechunk.4
mfastboot flash vendor vendor.img_sparsechunk.5
mfastboot flash vendor vendor.img_sparsechunk.6
mfastboot flash vendor vendor.img_sparsechunk.7
mfastboot flash vendor vendor.img_sparsechunk.8
mfastboot flash vendor vendor.img_sparsechunk.9
mfastboot flash vendor vendor.img_sparsechunk.10
mfastboot flash vendor vendor.img_sparsechunk.11
mfastboot flash vendor vendor.img_sparsechunk.12
mfastboot erase carrier
mfastboot erase userdata
mfastboot erase DDR
mfastboot oem fb_mode_clear
mfastboot reboot
used this one, something that can improved ?
ASPViTo said:
used this one, something that can improved ?
Click to expand...
Click to collapse
yes, don't use it!
Where did you get the firmware from?
---------- Post added at 11:00 PM ---------- Previous post was at 10:44 PM ----------
Every single command applies to the corresponding file within the firmware.zip. The first command list you posted is the correct one but those two lines vendor.img...3+4 are useless because the files don't exist and cannot be flashed. Delete them and try again.