Database Users

need help with axon 7 a2017u semi bricked

Hi
Yesterday I got my axon 7 and it worked perfect.
Now I was wanted to change the language
So I downloaded as file that in my language
And I tried to install him .
And it worked by the adb software when the axon connected to the computer
So I went to the application in my phone and changed it to my language after USB debugging and developer option is worked
Then the phone was changed to my language and crashed
Now the axon just show the start logo and stuck in restart loop. so I tried to do few thing through your forum , but nothing helped ..
I also cleared the cache through recovery mode but it also didn't help
Its like the axon can't upload the operating system
Thanks a lot for who will help me here.
Also if it possible to send money through PayPal
And if it's legal I will send 30$ to the first that will help me solve this problem

Can you share the link to the file you downloaded ?
Is it compatible with the version of your phone ?
If you can enter in recovery it's enough to save it.

billy_boolean said:
Can you share the link to the file you downloaded ?
Is it compatible with the version of your phone ?
If you can enter in recovery it's enough to save it.
Click to expand...
Click to collapse
Yea the reason it happened is because I installed wrong adb language on my axon through USB debugging and external app
Now it possible to get into recovery
I just don't know what to do next
I tried few things but I always keep getting errors

You can try to install TWRP.
You will have a lot of option.
There is no option to restor the phone in the official recovery ?

billy_boolean said:
You can try to install TWRP.
You will have a lot of option.
There is no option to restor the phone in the official recovery ?
Click to expand...
Click to collapse
I tried to use twrp but the computer doesn't recognize My axon

You need to install driver first...

billy_boolean said:
You need to install driver first...
Click to expand...
Click to collapse
I tried but after the install the drivers and cheak them in the device manager in my computer
The name of the driver was London marshesll something
And not what I saw in the guide - adb something
And it didn't recognize my device
I wrote also adb reboot bootloader
And it gives me error massage

I would be more then happy to give someone 30$ now..
Just that my axon will work

Did you root your phone, or just use ADB to sideload a file? If it's wasn't rooted/unlocked, then a factory reset should take care of it, as nothing done via ADB in that setup would impact the system partitions.
If you used the unofficial bootloader unlocking, then you'll have to follow other people's restore guides.

As @TeutonJon78 mention, a factory reset will do the job youan boot to stock recovery using adb
Code:
adb reboot recovery
Or doing it manually,
- Completely Power off your device
- Press and HOLD Volume UP and Power button.
- once you boot to recovery just use your volume buttons to navigate FACTORY RESET.
- Reboot System

holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo

liron lev said:
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
Click to expand...
Click to collapse
I will be honest man. I bricked mine too. Everybody has a step by step guide that they say works. I followed them step by step. They did not work. I have an RMA open on my phone and fedex is taking it to ZTE. Use the warranty. Until Zte puts online the full factory images for us to use there is no real way to fix these things.

liron lev said:
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
Click to expand...
Click to collapse
Are you from Israel?
---------- Post added at 11:40 PM ---------- Previous post was at 11:38 PM ----------
I know how to help you if you can tell me which bootloader version you have? Did you unlocked it? did you use Tenfar's method to root it?

tabletalker7 said:
I will be honest man. I bricked mine too. Everybody has a step by step guide that they say works. I followed them step by step. They did not work. I have an RMA open on my phone and fedex is taking it to ZTE. Use the warranty. Until Zte puts online the full factory images for us to use there is no real way to fix these things.
Click to expand...
Click to collapse
Were you playing around with the rooting/unofficial bootloader? It should be very hard to actually brick the device without doing those things, and nothing a factory reset shouldn't fix.
If one's playing around with unofficial modifications, then they should take all precautions to make sure to know how to recover the device before hand. There's still a lot of moving pieces between potentially faulty TWRP bugs and no image file.
liron lev said:
holding up and down at the same time. get to fastboot mode it says secure boot: enabled and device state: locked. then i entered to recovery mode, and press on "wipe data/factory reset" (said it was successfully finished). then i pressed on "reboot system now". still its stuck on the zte logo
Click to expand...
Click to collapse
Did you let it sit for awhile? First runs after a factory reset can take up to even 10 minutes to boot fully. If it still doesn't work again, check if the recovery menu has another option like wipe cache/davlik, which maybe also needs to run if they have a bug in the recovery code about resetting data. If you hadn't touch anything using the tools on this forum, and none of the factory reset/wipe data/wipe cache stuff helps, then you probably have a faulty phone. Just sideloading an app shouldn't be able to corrupt a locked system partition.
The OP of this thread hasn't yet clarified if he was just sideloading files on a normal system (which should be totally fixable unless his phone has an actual flash problem) or if he had been tinkering with other things first.

TeutonJon78 said:
Were you playing around with the rooting/unofficial bootloader? It should be very hard to actually brick the device without doing those things, and nothing a factory reset shouldn't fix.
If one's playing around with unofficial modifications, then they should take all precautions to make sure to know how to recover the device before hand. There's still a lot of moving pieces between potentially faulty TWRP bugs and no image file.
Did you let it sit for awhile? First runs after a factory reset can take up to even 10 minutes to boot fully. If it still doesn't work again, check if the recovery menu has another option like wipe cache/davlik, which maybe also needs to run if they have a bug in the recovery code about resetting data. If you hadn't touch anything using the tools on this forum, and none of the factory reset/wipe data/wipe cache stuff helps, then you probably have a faulty phone. Just sideloading an app shouldn't be able to corrupt a locked system partition.
The OP of this thread hasn't yet clarified if he was just sideloading files on a normal system (which should be totally fixable unless his phone has an actual flash problem) or if he had been tinkering with other things first.
Click to expand...
Click to collapse
The factory reset made my phone lose it's IMEI. Everyone said follow this certain guide. After following that guide and getting more help after that I had an AXON 7 that wouldn't turn on at all. Without full factory images from ZTE I won't touch the software. ZTE can fix it.

tabletalker7 said:
The factory reset made my phone lose it's IMEI. Everyone said follow this certain guide. After following that guide and getting more help after that I had an AXON 7 that wouldn't turn on at all. Without full factory images from ZTE I won't touch the software. ZTE can fix it.
Click to expand...
Click to collapse
Which guide did you follow? A Factory reset form within the stock software or stock recovery shouldn't cause that problem at all, as it should only be wiping data, cache, Davlik, and potentially the "media" portion of the internal storage.

TeutonJon78 said:
Which guide did you follow? A Factory reset form within the stock software or stock recovery shouldn't cause that problem at all, as it should only be wiping data, cache, Davlik, and potentially the "media" portion of the internal storage.
Click to expand...
Click to collapse
The factory reset that made it lose the IMEI - it was completely stock then!

liron lev said:
Hi
Yesterday I got my axon 7 and it worked perfect.
Now I was wanted to change the language
So I downloaded as file that in my language
And I tried to install him .
And it worked by the adb software when the axon connected to the computer
So I went to the application in my phone and changed it to my language after USB debugging and developer option is worked
Then the phone was changed to my language and crashed
Now the axon just show the start logo and stuck in restart loop. so I tried to do few thing through your forum , but nothing helped ..
I also cleared the cache through recovery mode but it also didn't help
Its like the axon can't upload the operating system
Thanks a lot for who will help me here.
Also if it possible to send money through PayPal
And if it's legal I will send 30$ to the first that will help me solve this problem
Click to expand...
Click to collapse
I could help you, please pm.

i tried to use the appliction "morelocale2" to chnge my phone language.
i did turn on the usb debugging option through Developer Options.
it all went good until i tried to choose my language from the app (morelocale2) it change to my language got stucked and start looping over and over. (start up and shut dowm).
after that i cleand evrything such as: wipe data/factory and cache data, and then i restart the phone. it is stoped looping but got stucked on logo zte. and after i cleaned the data i waited few houres.
i also think i used an old version of "morelocale2".
and yes im from israel...

liron lev said:
i tried to use the appliction "morelocale2" to chnge my phone language.
i did turn on the usb debugging option through Developer Options.
it all went good until i tried to choose my language from the app (morelocale2) it change to my language got stucked and start looping over and over. (start up and shut dowm).
after that i cleand evrything such as: wipe data/factory and cache data, and then i restart the phone. it is stoped looping but got stucked on logo zte. and after i cleaned the data i waited few houres.
i also think i used an old version of "morelocale2".
and yes im from israel...
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.wanam
download this app
install it
search hebrew in hebrew
choose hebrew (iw)
accept the root prompt
reboot your phone
everything will be fine
If you have bootloop issues these are not related to the app!
if you need help with this contact me!
you have my info in pm.

[Guide] Fix for boot-loop and bricked Honor 8 (probably others too)

The reason I'm making this thread is because I was trying to root my Honor 8 and things just didn't work out in TWRP. Rebooted my phone and I realized I had bricked it since it would not boot after 10 minutes. Solutions seem to be scattered throughout different threads so here's guide for when you're stuck in a boot loop or you bricked your Honor 8.
What you'll need:
1. The firmware currently you are on. @Coolyou posted a guide for a firmware finder. Here is the post.
2. SD Card
What to do:
Step 1.
Download the correct firmware. It will be a .zip file.
Step 2.
Create a folder called dload in the root of your SD card, not your internal storage. Copy the .zip file the folder and unzip it or unzip it else where and copy the content into the dload folder
Step 3.
Power off Honor 8 (if possible, sometimes it'll auto boot up when forced shutdown)
Step 4.
Make sure your device is not plugged into a computer as it will load into something else.
Hold Vol+ & Vol- & Power. It will being to install the firmware from the dload folder if done correctly. If it instantly fails that means you downloaded the incorrect firmware the device is already one.
You're done! However, if your device does not go past the startup logo within 3 minutes proceed to step 5.
Step 5 is probably necessary as everytime I've bricked my device, I've had to do the next step.
Step 5.
Power off. Hold power and Vol+. Once in Recovery mode (not eRecovery), clear cache and format your device. Once done, reboot.
Ta-da, you're device is now back to normal.

Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?

Let go off the power button after the first vibration. Also make sure your phone is not plugged to a pc. With pc connected it boots into eRecovery instead of recovery. Good luck!
Edit:Also the guide does not make it 100% specific but the dload folder on the sd card needs to have the update.app file right inside it. If the structure is sd\dload\folder\update.app it also won't work.

Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!

alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
i have same problem, you can fix this? help me please

Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.

thekubiaks said:
Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.
Click to expand...
Click to collapse
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.

Hi, my device is still not booting up after installing the matching dload firmware on my device from the honor 8 website (FRD-L09).
Is there still anything I can do to maybe get this fixed?
I created a nandroid backup of all partitions that I were able to back up, but even rolling back all partitions did not make it boot again.
Sadly, I am not able to get the device into e.g. fastboot mode anymore because it is not booting anymore and therefore cant get an adb shell on it.
I can still enter recovery mode, but when trying to boot it just stays at the blue screen with the white "honor" text after the short boot animation with the 3d text

Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks

Lorog said:
Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks
Click to expand...
Click to collapse
Same here on a Note 8 did you find a solution?

thekubiaks said:
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.
Click to expand...
Click to collapse
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?

nickp22127 said:
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?
Click to expand...
Click to collapse
Its erecovery

tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...can u tell how did u managed to solve it???

oops, wrong thread

abbassbhai said:
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
i have the same pblm...can u tell how did u managed to solve it???
Click to expand...
Click to collapse
Do you find a solution? I have the same problem!

Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Did you find a solution? I have the same problem!

Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi, I have the exact same problem. Have you managed to fix it?

Same problems as other people above, couldn't load any recovery. Anyone can help us out?

Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi even I have the same problem with Honor 8 Pro.. Did you get any solution??

Hi even I have the same problem with Honor 8 Did you get any solution??

Hardbrick: System / Recovery / Fastboot not booting, LED flashing red-green

I bricked my P8Lite when flashing the original firmware from withing TWRP.
Now I can neither boot into System, Recovery nor Fastboot. I tried all Power / Volume button combinations.
The screen stays black, the LED is flashing red, then two times green and then red again.
I disconnected the battery and reconnected it, still no progress.
Can anyone help me?

p8liteuser said:
I bricked my P8Lite when flashing the original firmware from withing TWRP.
Now I can neither boot into System, Recovery nor Fastboot. I tried all Power / Volume button combinations.
The screen stays black, the LED is flashing red, then two times green and then red again.
I disconnected the battery and reconnected it, still no progress.
Can anyone help me?
Click to expand...
Click to collapse
What version of original firmware were you using? What wipe did you make?

XTutorials said:
What version of original firmware were you using? What wipe did you make?
Click to expand...
Click to collapse
I extracted the Huawei Firmware for P8Lite (the correct one, I checked that) with Huawei Update Extractor and then installed from within TWRP.
After that I wiped TWRP asked me to wipe the cache and I did so.

p8liteuser said:
I extracted the Huawei Firmware for P8Lite (the correct one, I checked that) with Huawei Update Extractor and then installed from within TWRP.
After that I wiped TWRP asked me to wipe the cache and I did so.
Click to expand...
Click to collapse
Why did you extract the update.app from the update.zip!?!?
Of course it is bricked. I'm pretty sure you didn't edit updater-script to symlink the files not write the update.app.
I've seen this kind of brick 2-3 months ago on general or help section, search and maybe you will find something helpful.

somewhere I had the similar issue. Try this once:
Shut down your mobile
Connect your mobile (while it's turned off) to laptop while pressing the vol down key
This should boot you into fastboot mode

amageek nope, wont help. had that same kind of brick. Need to buy a new phone. Even Huawei Care cant fix it .

p8tgames said:
amageek nope, wont help. had that same kind of brick. Need to buy a new phone. Even Huawei Care cant fix it .
Click to expand...
Click to collapse
That sucks man.. Anyways, congrats on your new phone

amageek said:
That sucks man.. Anyways, congrats on your new phone
Click to expand...
Click to collapse
It isnt that bad. I take that whole thing with houmor
But, if you got that thing you can plug into the eMMC chip, you can recover it. (Dont know what its called)

Mate 8 problems

Hi hope someone can help?
I've messed up my mate 8 by downloading the firmware app and inadvertently flashed with wrong firmware.
I've got a L29C636 Which I believe is Asia model
but I've used DC Phoenix and tried to flash a C636 Stock rom.
It all flashes ok but the second step wants to put the phone in update mode which I can never do.
I've tried using a C636 update.app and put it on a SD card in the dload folder but it does nothing when I press vol up + vol down + power, all I get is the huawei logo for ages then either
your device has failed verification and may not work properly
or if I hold the power button for long enough it gives me the standard EMUI wipe data/factory reset and wipe cache etc
Anyone any idea to recover?
By using DC Phoenix I managed to glean I think I've got NXT-L29C432B192 but have also seen NXT-C900B170 too!
Mighty confused, can anyone offer any advice please?

BlackCat1969 said:
Hi hope someone can help?
I've messed up my mate 8 by downloading the firmware app and inadvertently flashed with wrong firmware.
I've got a L29C636 Which I believe is Asia model
but I've used DC Phoenix and tried to flash a C636 Stock rom.
It all flashes ok but the second step wants to put the phone in update mode which I can never do.
I've tried using a C636 update.app and put it on a SD card in the dload folder but it does nothing when I press vol up + vol down + power, all I get is the huawei logo for ages then either
your device has failed verification and may not work properly
or if I hold the power button for long enough it gives me the standard EMUI wipe data/factory reset and wipe cache etc
Anyone any idea to recover?
By using DC Phoenix I managed to glean I think I've got NXT-L29C432B192 but have also seen NXT-C900B170 too!
Mighty confused, can anyone offer any advice please?
Click to expand...
Click to collapse
ok dc phoenix thinks I have nxt-l29-C636B180 now
Do you think I could try to get this firmware and flash with that? Anyone know where to get that? I can't find it anywhere.
When I use adb and phone in fastboot mode and use adb devices I get nothing even though device manager has driver loaded called Android Sooner Single ADB Interface
Am I wasting my time as ADB can't see it over USB?
Anyone any pointers please?

Huawei P9 Lite Mini (SLA-L22) Unbrick

Hello,
I am a new user and I have a problem.
I have tried unlocking the bootloader using this tool: https://github.com/SkyEmie/huawei-honor-unlock-bootloader, but after a few days of unsuccessful unlocking I gave up and rebooted the phone; it tried to reboot, but it had hanged on the Huawei screen (powered by Android). I have tried recovering with Huawei's eRecovery (Power + Volume up + USB, Error: "Getting package info failed") and via factory reset key combo (Power + Volume up + NO USB, Failed: goes to 3% of factory resetting and then reboot and repeat forever, sometimes goes up to 99% and just hangs). I have foud that some people put the UPDATE.APP into the dload folder on the root of a micro SD card and use TeamMT firmware finder to download the correct firmware. The problem is that I don't know which exact firmware to use, but that doesn't matter because they are all unavailable (says just "An error ocurred" whe I click on the download link).
I should point out that the phone is NOT unlocked.
Any help is greatly appreciated.
English is not my primary language, so please excuse any of my mistakes.
Stay healthy

M8V22 said:
Hello,
I am a new user and I have a problem.
I have tried unlocking the bootloader using this tool: https://github.com/SkyEmie/huawei-honor-unlock-bootloader, but after a few days of unsuccessful unlocking I gave up and rebooted the phone; it tried to reboot, but it had hanged on the Huawei screen (powered by Android). I have tried recovering with Huawei's eRecovery (Power + Volume up + USB, Error: "Getting package info failed") and via factory reset key combo (Power + Volume up + NO USB, Failed: goes to 3% of factory resetting and then reboot and repeat forever, sometimes goes up to 99% and just hangs). I have foud that some people put the UPDATE.APP into the dload folder on the root of a micro SD card and use TeamMT firmware finder to download the correct firmware. The problem is that I don't know which exact firmware to use, but that doesn't matter because they are all unavailable (says just "An error ocurred" whe I click on the download link).
I should point out that the phone is NOT unlocked.
Any help is greatly appreciated.
English is not my primary language, so please excuse any of my mistakes.
Stay healthy
Click to expand...
Click to collapse
Hi, if you want flash Stock ROM using dload method (SD card etc.), download and install Service ROM . I think your region is C432 (? - it's very important!) , if so, then download https://androidhost.ru/2AK0
firmware for Dual SIM ,
or, https://androidhost.ru/30QS for Single SIM.
Instructions can be found in ReleaseDoc folder.
The process will erase all your data.

Hello,
thank you very much for your reply. I followed the instructions You provided and flashed the file for the dual sim model and the phone started booting android. It again hanged at the Huawei logo, but this time while loading Android, and not before (the difference is that on the first screen before loading OS is says Powered by Android and on the second one it does not). I then factory resetted it and waited some time and it booted completely fine. After around half an hour it gave me a notification about a system update (ver. SLA-L22C432B176), which was applied completely successfully.
Thank you very much for your help once again.

M8V22 said:
Thank you very much for your help once again.
Click to expand...
Click to collapse
No problem