Hardbrick: System / Recovery / Fastboot not booting, LED flashing red-green - P8lite Q&A, Help & Troubleshooting

I bricked my P8Lite when flashing the original firmware from withing TWRP.
Now I can neither boot into System, Recovery nor Fastboot. I tried all Power / Volume button combinations.
The screen stays black, the LED is flashing red, then two times green and then red again.
I disconnected the battery and reconnected it, still no progress.
Can anyone help me?

p8liteuser said:
I bricked my P8Lite when flashing the original firmware from withing TWRP.
Now I can neither boot into System, Recovery nor Fastboot. I tried all Power / Volume button combinations.
The screen stays black, the LED is flashing red, then two times green and then red again.
I disconnected the battery and reconnected it, still no progress.
Can anyone help me?
Click to expand...
Click to collapse
What version of original firmware were you using? What wipe did you make?

XTutorials said:
What version of original firmware were you using? What wipe did you make?
Click to expand...
Click to collapse
I extracted the Huawei Firmware for P8Lite (the correct one, I checked that) with Huawei Update Extractor and then installed from within TWRP.
After that I wiped TWRP asked me to wipe the cache and I did so.

p8liteuser said:
I extracted the Huawei Firmware for P8Lite (the correct one, I checked that) with Huawei Update Extractor and then installed from within TWRP.
After that I wiped TWRP asked me to wipe the cache and I did so.
Click to expand...
Click to collapse
Why did you extract the update.app from the update.zip!?!?
Of course it is bricked. I'm pretty sure you didn't edit updater-script to symlink the files not write the update.app.
I've seen this kind of brick 2-3 months ago on general or help section, search and maybe you will find something helpful.

somewhere I had the similar issue. Try this once:
Shut down your mobile
Connect your mobile (while it's turned off) to laptop while pressing the vol down key
This should boot you into fastboot mode

amageek nope, wont help. had that same kind of brick. Need to buy a new phone. Even Huawei Care cant fix it .

p8tgames said:
amageek nope, wont help. had that same kind of brick. Need to buy a new phone. Even Huawei Care cant fix it .
Click to expand...
Click to collapse
That sucks man.. Anyways, congrats on your new phone

amageek said:
That sucks man.. Anyways, congrats on your new phone
Click to expand...
Click to collapse
It isnt that bad. I take that whole thing with houmor
But, if you got that thing you can plug into the eMMC chip, you can recover it. (Dont know what its called)

Related

[Q] Black screen and bootloop

Hi,
1. I rooted my phone successfully.
2. I installed droid2recovery.apk
3. Restarted. Installed CM10 and Gaaps (wrong version)
4. Reboot. Everything was normal with some annoyances due to the wrong version of Gaaps.
5. Checked and the phone was already rooted in CM10. Installed droid2recovery.apk again. Reboot.
6. Trapped in bootloop.
7. Reboot and enter in system recover.
8. Tried to install CM10 and correct Gaaps. Not possible due to failed to verify whole-file signature.
9. Discover that official recover mode doesn't install unofficial roms.
10. Searched for official roms of Milestone 2 BR. All links are broken.
11. I flashed downgrade_for_bl_3 with RSD Lite. Everything was ok. PASS.
12. Still bootloop. Enter in recover mode. Black screen. Can't see the android icon with exclamation mark.
Is my phone a paper holder now? Please advise.
I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???
douglasrac said:
I'm really without luck today.
I manage to flash a SBF with Android 2.3.6, exactly like the one I had. But then I couldn't root, not with the same method I rooted mine, not with any other method.
Then I downloaded another SBF and used RSD Lite to flash it, and the phone completely died. RSD reported everything OK, PASS, Finished, perfect.
Now nothing happens. The phone is off, black screen. Completely dead. But if I hit Power + Vol - + Camera, the computer recognize. But nothing on the screen. I'm re-flashing the same SBF again.
Why different thing happen when I proceed the same way as I did in the past?
Why can't I just flash a recover boot that accepts direct installation of Cyanogen Mod 10???
Click to expand...
Click to collapse
You have to flash that same Android 2.3.6 SBF file, you can't use any more that "another sbf". For rooting that 2.3.6 use this http://forum.xda-developers.com/showthread.php?t=1750277
http://forum.xda-developers.com/showthread.php?t=1758271 this can help too
After you get CM10 back running, do not use droid2recovery.apk anymore!
Thank you. That really helped.
After you get CM10 back running, do not use droid2recovery.apk anymore!
Click to expand...
Click to collapse
Why not?
Odp: [Q] Black screen and bootloop
douglasrac said:
Thank you. That really helped.
Why not?
Click to expand...
Click to collapse
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk
henediac said:
Because you already have recovery and you don't need it... doing this you can destroy something (maybe 2-init or 2-boot), and you will need to recover your phone using RSD Lite.
via tapatalk
Click to expand...
Click to collapse
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?
You can still flash other sbfs, but when do turn on, you need to go in recovery mode, than clear cache and data. It will start normally again.
To go to stock recovery hold when turn on "@" or "x", than when show the "android with ! " you hold volume - and foto or volume + and foto or the volume + and -, than you are in recovery.
Sorry about my English
I am showing all the option because I do not remember perfect what to do... But it works
Sent from my A953 using xda app-developers app
cant get it to work..anyone got a link to a froyo stock sbf?
@Yostarone
http://sbf.droid-developers.org/umts_milestone2/list.php
i don't know what froyo rom you want, so I put link to whole list. (build number for eu froyo is MILS2_U6_2.4.24).
paulimbr said:
Hi Douglas, did you get the milestone working again? I'm stucked with the same problem, the rsdlite recognize my cellphone I can flash it but the screen is black. Anything works
How do you fix it?
Click to expand...
Click to collapse
I didn't get it working. Did you?
douglasrac said:
I didn't get it working. Did you?
Click to expand...
Click to collapse
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it
lulli1 said:
boot into stock recovery and do a full wipe. This will solve your problem.
Press Power and x (on your Hardwarekeyboard) for several seconds. Release the buttons and you will see a yellow triangle with an exclamationmark in it. Now press vol up and down key together. voilla you got it
Click to expand...
Click to collapse
I wish it was that simple. After flashing the phone is completely dead. And now I cant even go to bootloader anymore.... :crying:
could your problem be battery related? do you have a chance to try using another battery?
lulli1 said:
could your problem be battery related? do you have a chance to try using another battery?
Click to expand...
Click to collapse
Hi,
Sorry for the late reply. I was charging the battery
No, the problem is not the battery. Nothing works anymore. The phone doesn't even turn ON. All Black screen, not even boot loop.
So I get into the bootloader and flash new room. I can see the SN Updated text. But that is it. After it doesn't work.
I flashed DOWNGRADE BL =3 and then I flashed MILA2_U6_3.12.0_SIGNED_US1MILESTONE2PERARB125LA016.0R_GSXMILETPERARLA_P022_A013_M006_HWp2a_WIG142538_Service1FF
Nothing. Black Screen.
Then I flash M2L_U6_4.5.2_51-27_R01_SIGNED_US1MILA2GBPERARB125LA001.0R_STABLE45LAMILETPERLA_P013_A028_M001_HWp2a_Service1FF.
Then I get boot loop.
:S

[Q] Defy Plus No Recovery

Hi,
I have had my motorola Defy Plus running cyanogen for a year or so. Various versions, 2nd init.
Recently I decided to upgrade to Cyanogen version http://forum.xda-developers.com/showthread.php?t=2515036
Got it installed and running ok but there were some glitches (maybe) so I started from scratch to be sure.
The method I used to completely re-initialise the phone is as follows.
repartitioned SD, wiped and flashed
DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_USAJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
booted into stock android. installed framaroot - rooted.
installed 2nd init
installed twrp
updated recovery
wipe/reset
install cyanogen
The first time I did this it worked (but with some gapps glitches so to trouble shoot I thought I would start again.
Now this is the problem.
the second time when I tried to flash the stock rom RSD lite hung with "please manually reboot the phone"
After this it is impossible to get into stock recovery from the android triangle screen. When pressing both volume buttons the only thing that happens is the screen brightness toggles between light and dim.
I can get the phone to connect to RSD lite and I can flash ROMS - I have tried a few but I cannot get recovery, Always after flashing RSD says please manually reboot phone. The automatic reboot does nothing but get to the motorola or triangle screen, or a black screen sometimes.
Just to clarify - I have googled and tried many solutions, the main problem is that there is no stock recovery from the triangle screen so no solution that relies on this is working,
Any help appreciated. Thanks.
Stock recovery is included in the ... stock ROM (duh) so you need to install completely the stock ROM. But anyway at what serve stock recovery for you?
pgreed said:
Stock recovery is included in the ... stock ROM (duh) so you need to install completely the stock ROM. But anyway at what serve stock recovery for you?
Click to expand...
Click to collapse
The one that usually works is DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_US AJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
Which is the retail UK version for my phone. However when I try to flash it now with RSD it gets to the reboot stage but I am not sure it completes.
deMangler said:
The one that usually works is DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_US AJRDNGIBRRTGB_P023_A025_M002_Service1FF.sbf.gz
Which is the retail UK version for my phone. However when I try to flash it now with RSD it gets to the reboot stage but I am not sure it completes.
Click to expand...
Click to collapse
I think what would solve my problem would be a way of installing the above rom (which I believe includes the bootloader). I need to solve the problem of the flashing not progressing beyond the reboot stage.
I am using RSD Lite version 6.1.4
Any help appreciated. Thanks.
Boot in recovery. Do a total wipe (factory reset). Reboot in bootloader. Flash the .sbf.
pgreed said:
Boot in recovery. Do a total wipe (factory reset). Reboot in bootloader. Flash the .sbf.
Click to expand...
Click to collapse
There is no functioning recovery, so it is impossible to do a wipe. It is possible to flash a stock ROM (which should restore the recovery) using RSD lite but the process does not get past the reboot stage.
download again the sbf or flash another sbf.
pgreed said:
download again the sbf or flash another sbf.
Click to expand...
Click to collapse
Thanks - good advice I have been trying that. Meanwhile I will be looking out for other ways of solving the problem. I will let this thread know if anything works.
Thanks everyone.
deMangler said:
Thanks - good advice I have been trying that. Meanwhile I will be looking out for other ways of solving the problem. I will let this thread know if anything works.
Thanks everyone.
Click to expand...
Click to collapse
I am not supposed to be cynic. That was happened to me a few times and eventually I can managed to make a complete flash. Try again.
pgreed said:
I am not supposed to be cynic. That was happened to me a few times and eventually I can managed to make a complete flash. Try again.
Click to expand...
Click to collapse
Thanks - I will let you know if it works.
deMangler said:
Thanks - I will let you know if it works.
Click to expand...
Click to collapse
I had the same problem and solved.After flash with RSD lite it stusk on Moto logo and pulsing,pullsing...,So disconenct from cable and remove baterry.Then conect baterry and turn on fone with Volume + and power at the same time to go into recovery.Yes it show a warning in triangle and I thing IM FU**ED it have no recovery.But just pushing the butons wtih angry(not remember the order) and it come in stock recovery.Then wipe everything that can wiped and reboot.It works and phone go to work.
same here - but your report helped!
I had the same problem and did what you did... boot with vol+down and power and got to the triangle. then press UP+DOWN fast after another. what follows is the recovery!
propov said:
I had the same problem and solved.After flash with RSD lite it stusk on Moto logo and pulsing,pullsing...,So disconenct from cable and remove baterry.Then conect baterry and turn on fone with Volume + and power at the same time to go into recovery.Yes it show a warning in triangle and I thing IM FU**ED it have no recovery.But just pushing the butons wtih angry(not remember the order) and it come in stock recovery.Then wipe everything that can wiped and reboot.It works and phone go to work.
Click to expand...
Click to collapse

Stuck in recovery with black screen, can't enter fastboot

I followed this guide in order to root my brand new p8lite.
The thing is that now I have a black screen. If I plug my phone via usb, adb shows me that the device is in recovery.
By adb shows me that the device is in recovery I mean this:
Code:
# adb devices
List of devices attached
W3D7N16712000718 recovery
What I did:
Checked the model. It's an ALE-L21
Chapter 1: not a windows user, but managed to get adb up and running on my linux machine.
Chapter 2: everything went fine, bootloader unlocked
Chapter 3: my phone booted up just fine
Chapter 4: skipped it, as my phone was booting fine into system
Chapter 5:
So you want to convert to a single/dual sim?
Click to expand...
Click to collapse
My answer: "no thanks", so I skipped it
Chapter 6: I did the upgrade through OTA BEFORE reading the guide. Double checked I was running 6.0, so I skipped it
Chapter 7: Downloaded the file, flashed trought fastboot. And now I'm here.
I think I may have ****ed up things in the last 3 chapters.
What I tried to fix this:
Code:
# adb reboot bootloader
phone rebooted then huawei logo then blackscreen. adb still shows it's in recovery
After searching in the forum, I came by
Code:
adb reboot-bootloader
(notice the hypen). Firing that command put my phone into fastboot. Couldn't believe it, but I took the chance to flash the files found in chapter 4 (bootloader, recovery, cust and system, in this order). No luck, still reboot, logo, black screen
Now, no matter the presence of the hypen in the command, my phone keeps going into recovery (after the usual reboot, logo, black screen)
Tried to hold down POWER to shut it down. After a while it reboots, logo and black screen again. Laptop keeps saying device is into recovery
Tried to download the official 6.0 update, put on a sd card (dload/UPDATE.APP), held down POWER+VOLUP+VOLDOWN. Again, reboot, logo, black screen. recovery mode, again.
Frustrated, I unplugged the phone. After a while, it rebooted, logo and blackscreen without me touching it. Weird. It did it again a couple of times, but now it has stopped (with a black screen and, if plugged in, adb. says is into recovery)
I really don't know what to do, please help me.
UPDATE:
After leaving a night on its own, the phone was noticeably hot.
Also, when unplugged, if I hold POWER it shows me the logo a couple of time before going black screen.
Ok. But can you enter in recovery?
Another question: you said that u flashed the necessary files. What about flashing directly twrp as recovery, and from twrp make all wipes, and afther that flash from twrp some zip-ped firmwares?
tamaskurti said:
Ok. But can you enter in recovery?
Click to expand...
Click to collapse
Apparently yes (or at least, adb says I'm into recovery). However, I just get a black screen.
Tapping randomly on the screen doesn't give any kind of feedback (no vibration, no beeps, nothing).
tamaskurti said:
Another question: you said that u flashed the necessary files. What about flashing directly twrp as recovery, and from twrp make all wipes, and afther that flash from twrp some zip-ped firmwares?
Click to expand...
Click to collapse
Since I started having those problems after I flashed TWRP, I thought it was a better idea to flash stock recovery (alongside bootloader, cust and system) and restart from there.
I have the same issue...
Have you solved the issue? In case you solved, how?
mmennella said:
I have the same issue...
Have you solved the issue? In case you solved, how?
Click to expand...
Click to collapse
Not yet. I brought the phone to a local repair shop. Tomorrow they should bring it back, hope they have good news
Mmmmmm... I go to buy new One. Huawei must have a way to reflash, but i can't wait. Thanks a lot
Inviato dal mio Redmi 3 utilizzando Tapatalk
S1cK94 said:
Not yet. I brought the phone to a local repair shop. Tomorrow they should bring it back, hope they have good news
Click to expand...
Click to collapse
i brought it to my local repairshop and they sent my phone to manufacters central repair and they fixed it for free.
AfrikanDionysus Solution
Huawei P8 lites are region specific like Middle east asia america etc so before you go in make sure you know your build number in my case ALE-L21C185B560 its the UAE variant now if you've messed go to the huawei website download the rom specific to your region any other region won't work!!! get a clean sd card extract the file and copy it to the root of the sd card its normally an update.app inside a folder named dload shutdown the phone now press vol+ and vol - and the power button till it starts installing.. If you've messed up your recovery and can get to fastboot by plugging in the phone then pressing vol down and power.. use the Huawei extractor tool and extract the recovery from the just downloaded rom and flash it.. then retry the restore as stated.. im sure you can google all the tools you need to get so im not putting any links !!! Ahsante !:good::good::good:

[Guide] Fix for boot-loop and bricked Honor 8 (probably others too)

The reason I'm making this thread is because I was trying to root my Honor 8 and things just didn't work out in TWRP. Rebooted my phone and I realized I had bricked it since it would not boot after 10 minutes. Solutions seem to be scattered throughout different threads so here's guide for when you're stuck in a boot loop or you bricked your Honor 8.
What you'll need:
1. The firmware currently you are on. @Coolyou posted a guide for a firmware finder. Here is the post.
2. SD Card
What to do:
Step 1.
Download the correct firmware. It will be a .zip file.
Step 2.
Create a folder called dload in the root of your SD card, not your internal storage. Copy the .zip file the folder and unzip it or unzip it else where and copy the content into the dload folder
Step 3.
Power off Honor 8 (if possible, sometimes it'll auto boot up when forced shutdown)
Step 4.
Make sure your device is not plugged into a computer as it will load into something else.
Hold Vol+ & Vol- & Power. It will being to install the firmware from the dload folder if done correctly. If it instantly fails that means you downloaded the incorrect firmware the device is already one.
You're done! However, if your device does not go past the startup logo within 3 minutes proceed to step 5.
Step 5 is probably necessary as everytime I've bricked my device, I've had to do the next step.
Step 5.
Power off. Hold power and Vol+. Once in Recovery mode (not eRecovery), clear cache and format your device. Once done, reboot.
Ta-da, you're device is now back to normal.
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Let go off the power button after the first vibration. Also make sure your phone is not plugged to a pc. With pc connected it boots into eRecovery instead of recovery. Good luck!
Edit:Also the guide does not make it 100% specific but the dload folder on the sd card needs to have the update.app file right inside it. If the structure is sd\dload\folder\update.app it also won't work.
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
i have same problem, you can fix this? help me please
Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.
thekubiaks said:
Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.
Click to expand...
Click to collapse
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.
Hi, my device is still not booting up after installing the matching dload firmware on my device from the honor 8 website (FRD-L09).
Is there still anything I can do to maybe get this fixed?
I created a nandroid backup of all partitions that I were able to back up, but even rolling back all partitions did not make it boot again.
Sadly, I am not able to get the device into e.g. fastboot mode anymore because it is not booting anymore and therefore cant get an adb shell on it.
I can still enter recovery mode, but when trying to boot it just stays at the blue screen with the white "honor" text after the short boot animation with the 3d text
Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks
Lorog said:
Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks
Click to expand...
Click to collapse
Same here on a Note 8 did you find a solution?
thekubiaks said:
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.
Click to expand...
Click to collapse
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?
nickp22127 said:
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?
Click to expand...
Click to collapse
Its erecovery
tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...can u tell how did u managed to solve it???
oops, wrong thread
abbassbhai said:
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
i have the same pblm...can u tell how did u managed to solve it???
Click to expand...
Click to collapse
Do you find a solution? I have the same problem!
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Did you find a solution? I have the same problem!
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi, I have the exact same problem. Have you managed to fix it?
Same problems as other people above, couldn't load any recovery. Anyone can help us out?
Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi even I have the same problem with Honor 8 Pro.. Did you get any solution??
Hi even I have the same problem with Honor 8 Did you get any solution??

P8 and bricks? How to get rid of?

Hi, my phone will not start. Still stands on the logo 'Huawei' and resets. I tried the method of '3 keys' but has the same thing. They differ by the ADB and the phone was on LOGO 'Huawei'. I have no strength. Does anyone have any idea? Regards.
francyPL said:
Hi, my phone will not start. Still stands on the logo 'Huawei' and resets. I tried the method of '3 keys' but has the same thing. They differ by the ADB and the phone was on LOGO 'Huawei'. I have no strength. Does anyone have any idea? Regards.
Click to expand...
Click to collapse
Hold power button and down button while keeping phone connected to pc and you should enter fastboot mode from there extract your desire firmware by Huawei update extractor and flash
System Cust Boot And Recovery after extracting
HaiderHady said:
Hold power button and down button while keeping phone connected to pc and you should enter fastboot mode from there extract your desire firmware by Huawei update extractor and flash
System Cust Boot And Recovery after extracting
Click to expand...
Click to collapse
Hello, I did so I have uploaded even ROM B052, and the phone starts this logo Huawei and resets it again Huawei logo. I can not even enter the recovery. Do you still have any idea? Thanks
francyPL said:
Hello, I did so I have uploaded even ROM B052, and the phone starts this logo Huawei and resets it again Huawei logo. I can not even enter the recovery. Do you still have any idea? Thanks
Click to expand...
Click to collapse
Sorry dude no idea
Hi.
Take out all SIM and the SD, then try to flash TWRP and make ALL wipes.
Then do the unbrick procedure. The first boot can take up to 30 minutes, so keep the battery charged.
If this still does not work, you may try to disconnect everything and the battery, then do the unbrick procedure.
I managed to reanimate a hardbrick with this method. See my other post.
good luck!
Radias

Categories

Resources