Database Users

Zenfone A500KL csc mode only invalid boot image

Any expert who can HELP!!!
i have an asus a500KL zenfone 5 tried software update after reboot got ERROR: invalid boot image
i am fairly experienced with root access, custom roms however this device was never rooted and have been trying to fix this issue for a few days.
I am able to get to csc mode, also powering off and entering BLUE SCREEN csc mode holding power ands vol up for 3 cycles until the screen goes blue, even installed different drivers and full restart of pc and phone, still not work.
I have tried ALL the flash asus tools and everything. tried a few intels but they dont even begin to work as mine is an ARM.
fastboot recognises csc mode!!!
I can flash a boot.img but that is it, does not change the situation.
Everything else gets an error, something like ERROR: Security prevents this action or something about it being locked. I think it might mean the bootloader is locked and cant access anything pretty much.
I have tried every key combination under the sun. (Timing, P + (+), P + (-), P + (+ & -), in all combos and timing combos.
Power + Vol Down gets me to the SD Update option.
CLick the top to continue and the bottom to reboot.
I have tried both and they both take me to the ERROR: invalid boot image
im stumped.
Ive Messed with HTC, Samsungs, Sony, Huawei for gods sake, even iphones and have never come across an issue like this that is so impossible to fix. I think i may have hit my first brick.
Any help will be greatly appreciated.
Regards

I have the same problem...
I have tried everything and I am still stuck with csc mode.
Please help
Best!
jaza-g said:
Any expert who can HELP!!!
i have an asus a500KL zenfone 5 tried software update after reboot got ERROR: invalid boot image
i am fairly experienced with root access, custom roms however this device was never rooted and have been trying to fix this issue for a few days.
I am able to get to csc mode, also powering off and entering BLUE SCREEN csc mode holding power ands vol up for 3 cycles until the screen goes blue, even installed different drivers and full restart of pc and phone, still not work.
I have tried ALL the flash asus tools and everything. tried a few intels but they dont even begin to work as mine is an ARM.
fastboot recognises csc mode!!!
I can flash a boot.img but that is it, does not change the situation.
Everything else gets an error, something like ERROR: Security prevents this action or something about it being locked. I think it might mean the bootloader is locked and cant access anything pretty much.
I have tried every key combination under the sun. (Timing, P + (+), P + (-), P + (+ & -), in all combos and timing combos.
Power + Vol Down gets me to the SD Update option.
CLick the top to continue and the bottom to reboot.
I have tried both and they both take me to the ERROR: invalid boot image
im stumped.
Ive Messed with HTC, Samsungs, Sony, Huawei for gods sake, even iphones and have never come across an issue like this that is so impossible to fix. I think i may have hit my first brick.
Any help will be greatly appreciated.
Regards
Click to expand...
Click to collapse

Do you happen to be QDLOAD mode or QHSUSB? My experience working with SD400 devices, you need to nuke one of your partition to be able entering QDLOAD mode.
edit : For some reason I believe the CSC mode you got into is actually fastboot mode. Did you tried running any fastboot command? If fastboot cant detect, manually replace csc driver in device manager with fastboot driver.

Can you provide a picture of the error codes ?

http://imgur.com/QQ7OxDZ
like this i believe?Im having the same problem

Hi All,
If you have CSC MODE and ERROR: INVALID BOOT IMAGE
I found a solution, that is worked for me.
You don't have to turn on the USB debugging on your phone, connect to the PC, etc.
Steps:
1. Download recovery.img from Official Stock ROM (e.g. WW_12.4.5.58)
1.1. IMPORTANT: Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW
2. Download Official Firmware from asus.com/Phone/ZenFone_5_A500KL/HelpDesk_Download/ (e.g. UL-ASUS_T00P-WW-12.4.5.58-user.zip)
2.1. Read the Description!!!
2.2. IMPORTANT: Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW
3. Copy the recovery.img and the <firmware>.zip files to the root of external SD card
4. Power off your device
5. Simultanously push the Power + Volume Down button and waiting for the choice screen
5.1. Choice screen:
1. Enter SD download mode
2. Exit update mode
6. Choose the "1. Enter SD download mode"
7. Choose the "apply update from external storage"
8. Choose the the <firmware>.zip file (e.g. UL-ASUS_T00P-WW-12.4.5.58-user.zip)
9. Waiting for the installation finished
10. Choose the "reboot system now"
Best Regards,
R.

invalid boot image means doesn't go to boot loader, how can i update from sd card then ?

Steve Al-Mousa said:
invalid boot image means doesn't go to boot loader, how can i update from sd card then ?
Click to expand...
Click to collapse
boot doesnt mean bootloader...

thanks for the explaination, I'm not an expert in this, just having this problem since i upgraded the firmware by OTA rebooted and got stuck, I've tried all methods here but useless, i can go to csc only, i get invalid boot image when i go to sd download... any suggestions ?
thanks

Try this
https://forum.xda-developers.com/zenfone-5/general/stock-a500kl-zenfone-5-lte-t3303475

Did you ever get this sorted? I have the same issue......
Steve Al-Mousa said:
thanks for the explaination, I'm not an expert in this, just having this problem since i upgraded the firmware by OTA rebooted and got stuck, I've tried all methods here but useless, i can go to csc only, i get invalid boot image when i go to sd download... any suggestions ?
thanks
Click to expand...
Click to collapse

Dagk66 said:
Did you ever get this sorted? I have the same issue......
Click to expand...
Click to collapse
I have been informed by the stupid Asus Thailand that the main board should be changed

[Guide] Fix for boot-loop and bricked Honor 8 (probably others too)

The reason I'm making this thread is because I was trying to root my Honor 8 and things just didn't work out in TWRP. Rebooted my phone and I realized I had bricked it since it would not boot after 10 minutes. Solutions seem to be scattered throughout different threads so here's guide for when you're stuck in a boot loop or you bricked your Honor 8.
What you'll need:
1. The firmware currently you are on. @Coolyou posted a guide for a firmware finder. Here is the post.
2. SD Card
What to do:
Step 1.
Download the correct firmware. It will be a .zip file.
Step 2.
Create a folder called dload in the root of your SD card, not your internal storage. Copy the .zip file the folder and unzip it or unzip it else where and copy the content into the dload folder
Step 3.
Power off Honor 8 (if possible, sometimes it'll auto boot up when forced shutdown)
Step 4.
Make sure your device is not plugged into a computer as it will load into something else.
Hold Vol+ & Vol- & Power. It will being to install the firmware from the dload folder if done correctly. If it instantly fails that means you downloaded the incorrect firmware the device is already one.
You're done! However, if your device does not go past the startup logo within 3 minutes proceed to step 5.
Step 5 is probably necessary as everytime I've bricked my device, I've had to do the next step.
Step 5.
Power off. Hold power and Vol+. Once in Recovery mode (not eRecovery), clear cache and format your device. Once done, reboot.
Ta-da, you're device is now back to normal.

Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?

Let go off the power button after the first vibration. Also make sure your phone is not plugged to a pc. With pc connected it boots into eRecovery instead of recovery. Good luck!
Edit:Also the guide does not make it 100% specific but the dload folder on the sd card needs to have the update.app file right inside it. If the structure is sd\dload\folder\update.app it also won't work.

Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!

alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
i have same problem, you can fix this? help me please

Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.

thekubiaks said:
Add me to the list, two soft bricked Honor 8's. Once I made the jump to Nougat and installed the Nougat version of TWRP 3.0.1-1, I started having issues. So, I tried to downgrade to FRD-L04C567B150 from FRD-L04C567B320 and had big problems installing B150. Always getting unable to load /data Has to be something to do with the new data structure of Nougat I have a copy of the full stock rom of B150 and B162 and have wiped the phone. I am trying to dload full B150 from SDcard but will fail immediately and says Wrong Version. I can get to fastboot and ADB. I also tried custom ROMs but that wont work because they need the basic Nougat structure to work from. I don't have a clue how to proceed seeing that I can't even wipe the phone and install a Full stock ROM B150 or B162??
Any help would be extremely appreciated.
Click to expand...
Click to collapse
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.

Hi, my device is still not booting up after installing the matching dload firmware on my device from the honor 8 website (FRD-L09).
Is there still anything I can do to maybe get this fixed?
I created a nandroid backup of all partitions that I were able to back up, but even rolling back all partitions did not make it boot again.
Sadly, I am not able to get the device into e.g. fastboot mode anymore because it is not booting anymore and therefore cant get an adb shell on it.
I can still enter recovery mode, but when trying to boot it just stays at the blue screen with the white "honor" text after the short boot animation with the 3d text

Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks

Lorog said:
Hi,
my phone keeps entering eRecovery and my PC does not recognize it so please how can I access it to install files. I think I have installed a wrong boot.img and recovery.img version of firmware.
Please I need help.
Thanks
Click to expand...
Click to collapse
Same here on a Note 8 did you find a solution?

thekubiaks said:
UPDATE : It freaking worked!!! After an entire weekend of hair pulling and going way deep into Nougat and MM trying to find the cause, it was a simple Full ROM B162 that I dloaded and three fingered from the SD card (of course it has to be the exact ROM for your phone such as FRD-L04C567B###). WOW, two phones are back. I'll stay at FRD-L04C567B162 and like it.
Lesson Learned: When you try to do an eRecovery and the Honor 8 starts downloading new firmware from the internet it creates a new folder on the sd card called something like HwOC. In that folder is stored the new firmware that erecover plans to use on the recovery. IF this HwOC folder is present and you try to do a Full ROM three finger install with the B150 or B162 firmware in the dload folder, the recovery will stop and say something like invalid version. To fix, remove the HwOC folder so that only dload is present, now do the three finger start and the firmware will install without error. Worked twice for me.
Click to expand...
Click to collapse
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?

nickp22127 said:
Do you have the link for the b162 full firmware?
edit:
also what recovery did you have installed when you did this?
Click to expand...
Click to collapse
Its erecovery

tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
alec_trikki said:
i have same problem!
i can't reboot in download mode: it vibrates twice and reboot in blue screen always, even leaving power button after first vibration.
How can i fix this?
please help..!
Click to expand...
Click to collapse
tiagoesbastos said:
i have same problem, you can fix this? help me please
Click to expand...
Click to collapse
i have the same pblm...can u tell how did u managed to solve it???

oops, wrong thread

abbassbhai said:
i have the same pblm...how did u both managed to boot it then??
---------- Post added at 11:46 AM ---------- Previous post was at 11:45 AM ----------
i have the same pblm...can u tell how did u managed to solve it???
Click to expand...
Click to collapse
Do you find a solution? I have the same problem!

Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Did you find a solution? I have the same problem!

Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi, I have the exact same problem. Have you managed to fix it?

Same problems as other people above, couldn't load any recovery. Anyone can help us out?

Rakeen70210 said:
Unfortunately, I cant seem to get to the part where it detects my dload folder and installs from the UPDATE.APP file. My phone keeps auto restarting whenever I try to turn off, and since bootloader is locked, I cant flash any images. Every time I hold down Vol+, Vol-, and power button the phone just vibrates twice and goes to the blue honor boot logo. I have successfully managed to get to the Fastboot menu by holding down Vol- and power button, but this menu is useless as bootloader is locked. Is there anything I can do?
Click to expand...
Click to collapse
Hi even I have the same problem with Honor 8 Pro.. Did you get any solution??

Hi even I have the same problem with Honor 8 Did you get any solution??

[Solved] Bricked my P9 Lite (VNS-L31) while attempting B130 update from SD card

Hi there !
I just switched from a Windows Phone to a Huawei P9 Lite (VNS-L31), my first Android phone (never too late, I guess?).
I was following the instructions provided in this toolkit (https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873) to unlock the dual SIM support, as this phone is from Orange and locked to single SIM.
I successfully unlocked the bootloader, installed TWRP and rooted the phone. I got to the stage when updating the phone from the SD card is requested. Stock firmware was L31C109B120, new firmware is L31C432B130.
The update seemed to progress well, but actually no, as the phone is now bricked (black screen, screen will not power on, does not display anything).
Powering the phone with any combination of Vol+, Vol- and Power depressed results in nothing at all.
So I installed adb + fastboot and at least the phone is recognized in fastboot. I successfully unlocked the bootloader (again?) within fastboot with my unlock code.
Now I am able to manually flash the boot, recovery and system partitions from the B130 firmware. Unfortunately, this results in nothing, the phone will still not boot to anything else than fastboot mode.
I have limited knowledge/experience with Android phones, so I am kind of stuck now. I have read several topics and fastboot definitely seems to be the way to go, but there must be something that I am doing wrong.
I was wondering whether someone would be willing to give me some insight, please?
Any help would be highly appreciated!
Many thanks in advance,
Regards,
Eric.
[Edit]: I was able to flash the stock VNS-L31C432B130 firmware but not with fastboot... I had to use DC-Phoenix and pay 15€ to do so. Is there a free equivalent to DC-Phoenix yet?

Hello
I think you should disconnect the cable and press on volume + and power erevovery wipe factory, cache. Restart
If it does not work, start again.
With the toolkit, bootloader code, installs twrp,
Go download c432oeminfo double sim.zip Badwolf
Fashe c432oeminfo.zip.
switch off.
Doad b130.

Yes, this solution saved my phone... And u can try flash with fastboot any partition (recovery, system....)
Odoslané z VNS-L21 pomocou Tapatalku

Thank you for your help, guys!
Yet, nothing happens when I disconnect the cable and try to reboot the phone while holding Vol+ and Power. Vol- and power or Vol+, Vol- and Power do not deal any better result unfortunately. The screen remains off.
I believe I should delete/flash something through fastboot, but I do not know what! I believe I have tried everything I could think of, and I am running out of ideas...
Yet the phone is accessible through fastboot, so all hope is not lost, right?

Well, I have good news: I managed to reflash my phone by following this thread: https://forum.xda-developers.com/hua...green-t3485836
You have to download and use DC-Phoenix to flash a stock firmware to the phone.
The bad part is that it is a paid service that will cost you 15€... but for me it was worth it in comparison with having a dead phone.
I wonder why no one has come up with a free equivalent to DC-Phoenix yet?

P9 lite stuck at "Your device booting now screen..."cant enter fastboot

Hi!
So i treid to install the twpr recovery via srk tool huawei
after i unlocked the bootloader and reboot the phone i got the ÿour device is booting now screen and i cant do anything
i tried to restart the phone then press the vol down + the usb cable and doesnt work i still get the same screen
can't acces erecovery, can't enter fastboot, i can't do anything
what do i do now?

Nickoll_no1 said:
Hi!
So i treid to install the twpr recovery via srk tool huawei
after i unlocked the bootloader and reboot the phone i got the ÿour device is booting now screen and i cant do anything
i tried to restart the phone then press the vol down + the usb cable and doesnt work i still get the same screen
can't acces erecovery, can't enter fastboot, i can't do anything
what do i do now?
Click to expand...
Click to collapse
Device stuck in device is booting now ? or the 3 option screen ?

Kcetin20 said:
Device stuck in device is booting now ? or the 3 option screen ?
Click to expand...
Click to collapse
The device is stuck in the "device is booting now':crying:

Same Problem...
Nickoll_no1 said:
The device is stuck in the "device is booting now':crying:
Click to expand...
Click to collapse
BLN-L24N - Honor 6x
Sooo, I have the same problem , here's my story. Please help I've resorted to using a SGH-T599N... Its embarrassing... I'd almost rather have an iPhone...
So Little ol' me was messing around/ deleted google play services/ reboot to twrp to recover but device ended up bricked. At the time, still able to access fastboot. I flashed recovery and firmware. I then tried dload roll back method and when it cleared the phone bootloader locked. So I unlocked bootloader again but when device re-booted the following screen came up and still remains:
" ' Your device has been unlocked and cant be trusted. ' -- ' Your device is booting now... ' " (No options are available.)
I eventually tried to restart to fastboot or erecovery BUT Everytime I try to power down the device, it tries to power up again but needs to charge for a minute before trying to boot itself back up. .(even after being on the charger for hours this happens). The problem with that is I can't get into fastboot or force dload because it automatically starts itself/ has to be plugged in until it turns back on. (Yes i've tried button mashing/ button holding/ etc. did not help)
How do I get the phone to charge, without it booting up? I have a feeling that if I can get it to start (without it first having to charge) I can get it to fastboot/ or erecovery. I have already tried to let the battery COMPLETELY drain.
Outside of that, I know the whole roll back and dload stuff. Currently it flashes the honor logo screen and then sits at "Your device is booting now..."
Bootloader is unlocked
OH! I should clarify, it boots on its own. I've tried disconnecting the battery, having it on the charger without the
battery. With the battery, Starting phone up by re-connecting the battery. No positive results
I'm about to start messing around with firmware flashing utilities, I just don't know of any. I wish there was a way to flash without being in fastboot mode. (I know very little of perl/python/linux, but I am a quick learner if you point me in the right direction.
Thank you in advance

MSDB714 said:
BLN-L24N - Honor 6x
Sooo, I have the same problem , here's my story. Please help I've resorted to using a SGH-T599N... Its embarrassing... I'd almost rather have an iPhone...
So Little ol' me was messing around/ deleted google play services/ reboot to twrp to recover but device ended up bricked. At the time, still able to access fastboot. I flashed recovery and firmware. I then tried dload roll back method and when it cleared the phone bootloader locked. So I unlocked bootloader again but when device re-booted the following screen came up and still remains:
" ' Your device has been unlocked and cant be trusted. ' -- ' Your device is booting now... ' " (No options are available.)
I eventually tried to restart to fastboot or erecovery BUT Everytime I try to power down the device, it tries to power up again but needs to charge for a minute before trying to boot itself back up. .(even after being on the charger for hours this happens). The problem with that is I can't get into fastboot or force dload because it automatically starts itself/ has to be plugged in until it turns back on. (Yes i've tried button mashing/ button holding/ etc. did not help)
How do I get the phone to charge, without it booting up? I have a feeling that if I can get it to start (without it first having to charge) I can get it to fastboot/ or erecovery. I have already tried to let the battery COMPLETELY drain.
Outside of that, I know the whole roll back and dload stuff. Currently it flashes the honor logo screen and then sits at "Your device is booting now..."
Bootloader is unlocked
OH! I should clarify, it boots on its own. I've tried disconnecting the battery, having it on the charger without the
battery. With the battery, Starting phone up by re-connecting the battery. No positive results
I'm about to start messing around with firmware flashing utilities, I just don't know of any. I wish there was a way to flash without being in fastboot mode. (I know very little of perl/python/linux, but I am a quick learner if you point me in the right direction.
Thank you in advance
Click to expand...
Click to collapse
So on ny phobe the mainboard is dead so i guess the internal storage is corrupted
I need to change that and i guess you need too...
It's not so expensive(like 40$ for my phone)

Nickoll_no1 said:
So on ny phobe the mainboard is dead so i guess the internal storage is corrupted
I need to change that and i guess you need too...
It's not so expensive(like 40$ for my phone)
Click to expand...
Click to collapse
do you have a part number?

MSDB714 said:
do you have a part number?
Click to expand...
Click to collapse
I dont think i was to a local service...it' s not so expensive but it's not cheap either

Mate 8 problems

Hi hope someone can help?
I've messed up my mate 8 by downloading the firmware app and inadvertently flashed with wrong firmware.
I've got a L29C636 Which I believe is Asia model
but I've used DC Phoenix and tried to flash a C636 Stock rom.
It all flashes ok but the second step wants to put the phone in update mode which I can never do.
I've tried using a C636 update.app and put it on a SD card in the dload folder but it does nothing when I press vol up + vol down + power, all I get is the huawei logo for ages then either
your device has failed verification and may not work properly
or if I hold the power button for long enough it gives me the standard EMUI wipe data/factory reset and wipe cache etc
Anyone any idea to recover?
By using DC Phoenix I managed to glean I think I've got NXT-L29C432B192 but have also seen NXT-C900B170 too!
Mighty confused, can anyone offer any advice please?

BlackCat1969 said:
Hi hope someone can help?
I've messed up my mate 8 by downloading the firmware app and inadvertently flashed with wrong firmware.
I've got a L29C636 Which I believe is Asia model
but I've used DC Phoenix and tried to flash a C636 Stock rom.
It all flashes ok but the second step wants to put the phone in update mode which I can never do.
I've tried using a C636 update.app and put it on a SD card in the dload folder but it does nothing when I press vol up + vol down + power, all I get is the huawei logo for ages then either
your device has failed verification and may not work properly
or if I hold the power button for long enough it gives me the standard EMUI wipe data/factory reset and wipe cache etc
Anyone any idea to recover?
By using DC Phoenix I managed to glean I think I've got NXT-L29C432B192 but have also seen NXT-C900B170 too!
Mighty confused, can anyone offer any advice please?
Click to expand...
Click to collapse
ok dc phoenix thinks I have nxt-l29-C636B180 now
Do you think I could try to get this firmware and flash with that? Anyone know where to get that? I can't find it anywhere.
When I use adb and phone in fastboot mode and use adb devices I get nothing even though device manager has driver loaded called Android Sooner Single ADB Interface
Am I wasting my time as ADB can't see it over USB?
Anyone any pointers please?