My Note 3 - LTE (SM-N9005) screen got stuck after trying to flash the ROM through ODIN. I was on 4.3 and tried to update my phone to KK 4.4. Every time the phone turns ON, it shows the same screen and I can't use it.
I am unable to go to Recovery mode by pressing (Vol UP+Home+Power) buttons but able to go to Downloading mode by pressing (Vol Down+Home+Power).
Can someone here please help me resolve this issue?
sshamim said:
My Note 3 - LTE (SM-N9005) screen got stuck after trying to flash the ROM through ODIN. I was on 4.3 and tried to update my phone to KK 4.4. Every time the phone turns ON, it shows the same screen and I can't use it.
I am unable to go to Recovery mode by pressing (Vol UP+Home+Power) buttons but able to go to Downloading mode by pressing (Vol Down+Home+Power).
Can someone here please help me resolve this issue?
Click to expand...
Click to collapse
Just remove the battery and put it back again and fire it up
edit:
you need to reflash with stock firmware again, check if it the correct firmware to your device before download and flash it
Could not do normal boot (Odin Mode) error - Need Help
Vasastan said:
Just remove the battery and put it back again and fire it up
Click to expand...
Click to collapse
Already did it multiple times but problem still persist
edit:
you need to reflash with stock firmware again said:
how to confirm that the firmware is the correct one? I've downloaded multiple firmwares from Sammobile.com site for my phone.
thanks for replying back.
Click to expand...
Click to collapse
Hello, anybody can help me ?
My phone Samsung S7 SM-G935F is root using the method Team Win Recovery Project 3.0.0-0 hero2lte, but when restarted only appears the black screen, i try to enter to download mode, but i can`t in to TWRP for to do an [Wipe] -> [Format Data], anybody have some solution ?
I`m trying the different combinations but always appears the black screen:
Hold [Volume Up] + [Home] ----Nothing
Hold [Volume Down] + [Home] + [Power] ----Download mode
Hold [Volume Up] + [Home] + [Power] ----Nothing
Hold [Volume Down] + [Volume Up] + [Home] + [Power] ----Nothing
I tried to put 3 photos but i can post extern links.
Thanks a lot.
To boot into recovery mode:
Press and hold “Volume UP + Power + Home” buttons together and as soon as you see Galaxy S7 Edge Boot logo, release all three buttons.
When you see an exclamation mark on screen, press and hold Power button and hit the Volume Up button once.
└ Note: This step won’t be necessary if you’ve a custom recovery like TWRP installed.
You could boot into download mode and try again via ODIN.
If you get really stuck, you can reflash your original firmware via ODIN.
nobnut said:
To boot into recovery mode:
Press and hold “Volume UP + Power + Home” buttons together and as soon as you see Galaxy S7 Edge Boot logo, release all three buttons.
When you see an exclamation mark on screen, press and hold Power button and hit the Volume Up button once.
└ Note: This step won’t be necessary if you’ve a custom recovery like TWRP installed.
You could boot into download mode and try again via ODIN.
If you get really stuck, you can reflash your original firmware via ODIN.
Click to expand...
Click to collapse
Thanks for your answer Nobnut, really is a big problem, this is my only phone now.
The first option is not possible, i have tried several times but i can`t get enter to TWRP.
The second option i thins is better because i can enter in download mode and odin recognize mi phone, what would i do next ? i think i must to reflash my original firmware, have you info about it ?
Ah, my phone is SM-G935F, from Sunrise Switzerland.
I have the info
Ok i got the info, i can do this via Odin.
But...
Do you think that my phone is bricked oder have solution ?
In this case, do you know what is the ROM that i need ?
Your phone is fine. It is not bricked.
It depends on where you bought the phone, or where you live. It is all determined by the CSC code you want/need. I am from the UK and my phone is unbranded, so my CSC is BTU.
I don't know what your CSC code should be.
If you are from Germany, it will probably be one of DBT, DTM, DUT, EPL, MAN, MBC, OXA*, VD2, VIA, XEG. If you are unsure, I *think* that DBT is unbranded. You can flash any of them though.
If you know it, you can download the correct firmware from various websites.
I however use this great tool. Just fill in your CSC and model number 'SM-G935F'. Select 'Check CR32' and 'Decrypt automatically'.
Click 'Check Update' and then download it when it finds it.
Unzip and flash the parts in ODIN. Your phone will be factory reset.
See screenshots below.
nobnut[/QUOTE said:
Hi, i using the sanfirm, for my phone with region AUT i cant get firmware available, would u help me ?
I can see more info because my phone is in the black screen, what can i do ?
Click to expand...
Click to collapse
donko2937 said:
Hi, i using teh sanfirm, for my phone with region AUT i cant get firmware availabe, would u help me ?
Click to expand...
Click to collapse
For some reason the AUT firmware isn't available on Samsung's servers. It should become available soon.
You have other choices:
1. You can try and install Smart Switch on your PC and *hopefully* you will be able to recover your device to its normal state.
or
2. Choose either BTU or XEU in SamFirm and flash one of those in ODIN until AUT becomes available. It will get your phone up and running again and both have the German language available. Your phone will work perfectly. Both of them are unbranded.
nobnut said:
For some reason the AUT firmware isn't available on Samsung's servers. It should become available soon.
You have other choices:
1. You can try and install Smart Switch on your PC and *hopefully* you will be able to recover your device to its normal state.
or
2. Choose either BTU or XEU in SamFirm and flash one of those in ODIN until AUT becomes available. It will get your phone up and running again and both have the German language available. Your phone will work perfectly. Both of them are unbranded.
Click to expand...
Click to collapse
Ok, very very thanks my friend, i`m working in the first option, smart swich, i`ll write you in minutes, you`ll be available some time more ?
donko2937 said:
Ok, very very thanks my friend, i`m working in the first option, smart swich, i`ll write you in minutes, you`ll be available some time more ?
Click to expand...
Click to collapse
I'll only be here for about 1 hour from now. I will check back.
I have just checked and the only Swiss firmware available right now is for Swisscom.
EDIT: Have you tried flashing TWRP in ODIN again? Try it a second time
nobnut said:
I'll only be here for about 1 hour from now. I will check back.
I have just checked and the only Swiss firmware available right now is for Swisscom.
Click to expand...
Click to collapse
Du you think that with this frmware i can work good ?
donko2937 said:
Du you think that with this frmware i can work good ?
Click to expand...
Click to collapse
It will work but it will have all of the Swisscom branding (bootanimation and any bloatware they install). If I were in your position, I would flash BTU or XEU. Then when AUT is released, I would flash back to that.
EDIT: Have you tried flashing TWRP in ODIN again? Try it a second time
donko2937 said:
Du you think that with this frmware i can work good ?
Click to expand...
Click to collapse
Ok Smart Switch can`t connect to my phone, i tried with Kies and the phone can be connected to the pc because is in the black screen, is connected but i can see the phone in the pc, now what i need to do ?
donko2937 said:
Ok Smart Switch can`t connect to my phone, i tried with Kies and the phone can be connected to the pc because is in the black screen, is connected but i can see the phone in the pc, now what i need to do ?
Click to expand...
Click to collapse
Don't panic!
First try booting into download mode again and reflash TWRP. It might work the second time.
nobnut said:
It will work but it will have all of the Swisscom branding (bootanimation and any bloatware they install). If I were in your position, I would flash BTU or XEU. Then when AUT is released, I would flash back to that.
EDIT: Have you tried flashing TWRP in ODIN again? Try it a second time
Click to expand...
Click to collapse
Well, i have my wife`s cell, i can take info from her if i need configuration extra.
Ok and where you founded the swisscom rom ? i download it as soon as possible.
And ... are you sure that when i flashed my room i`ll dont get again the black screen ?
donko2937 said:
Ok and where you founded the swisscom rom ? i download it as soon as possible.
And ... are you sure that when i flashed my room i`ll dont get again the black screen ?
Click to expand...
Click to collapse
I have sent you a private message with the link as I am not allowed to post these types of links in the forum.
It is not available directly from SamFirm. It is only available from a website which I hate called SamMobile.
---------- Post added at 02:13 PM ---------- Previous post was at 02:12 PM ----------
donko2937 said:
And ... are you sure that when i flashed my room i`ll dont get again the black screen ?
Click to expand...
Click to collapse
You will be fine because when you flash the full firmware, it will put the stock recovery partition back and it will factory reset your device.
nobnut said:
I have sent you a private message with the link as I am not allowed to post these types of links in the forum.
It is not available directly from SamFirm. It is only available from a website which I hate called SamMobile.
---------- Post added at 02:13 PM ---------- Previous post was at 02:12 PM ----------
You will be fine because when you flash the full firmware, it will put the stock recovery partition back and it will factory reset your device.
Click to expand...
Click to collapse
Thanks for your message, now i`m downloadin the ROM, i think that all is ok, well, you know about it !!!
Problem solved !!!
donko2937 said:
Thanks for your message, now i`m downloadin the ROM, i think that all is ok, well, you know about it !!!
Click to expand...
Click to collapse
Finally my S7 is working without problems.
I had installate an new rom and all is okey, after i rooted my phone again and all is good.
Thanks to nobnut for the help, really is a good member in this forum.
nobnut said:
Your phone is fine. It is not bricked.
It depends on where you bought the phone, or where you live. It is all determined by the CSC code you want/need. I am from the UK and my phone is unbranded, so my CSC is BTU.
I don't know what your CSC code should be.
If you are from Germany, it will probably be one of DBT, DTM, DUT, EPL, MAN, MBC, OXA*, VD2, VIA, XEG. If you are unsure, I *think* that DBT is unbranded. You can flash any of them though.
If you know it, you can download the correct firmware from various websites.
I however use this great tool. Just fill in your CSC and model number 'SM-G935F'. Select 'Check CR32' and 'Decrypt automatically'.
Click 'Check Update' and then download it when it finds it.
Unzip and flash the parts in ODIN. Your phone will be factory reset.
See screenshots below.
Click to expand...
Click to collapse
Just wondering: there are 5 files in the ZIP; of 4 files you know where to place them in Odin (AP, CP etc); but where do you place the 5th file?
henklbr said:
Just wondering: there are 5 files in the ZIP; of 4 files you know where to place them in Odin (AP, CP etc); but where do you place the 5th file?
Click to expand...
Click to collapse
If you see in the zip file comes tws files CSC ..... CSC_AUT_....... and HOME_CSC_AUT_.......
I think they are the same file, but i choosed the file that starts with CSC
please anyone help me
i was tying to install latest firmware G935FXXS1APG3 through odin
i got this messafe on me screen please check photo
Use the emergency recovery function in the smart switch pc software
i cannot boot into download mode
smart switch doesnt recognize samsung g7 edge nor does kies
thank you
alleshi said:
please anyone help me
i was tying to install latest firmware G935FXXS1APG3 through odin
i got this messafe on me screen please check photo
Use the emergency recovery function in the smart switch pc software
i cannot boot into download mode
smart switch doesnt recognize samsung g7 edge nor does kies
thank you
Click to expand...
Click to collapse
you need to reinstall the samsung drivers on your computer then plug in your phone, open smart switch and follow instructions.
Previously your phone installed the drivers, since you have a problem with your phone, you need to install the driver on your computer to recognize the phone not the other way around.
Emergency Recovery function with Smart switch
Hi
I got the same blue screen but my smart switch program doesn't recognise the model number and S/N.
The phone was purchased in India.
I disconnected, updated drivers and reconnected.
I have SM-J500F and it has Marshmallow 6.0.1
hsd1 said:
Hi
I got the same blue screen but my smart switch program doesn't recognise the model number and S/N.
The phone was purchased in India.
I disconnected, updated drivers and reconnected.
I have SM-J500F and it has Marshmallow 6.0.1
Click to expand...
Click to collapse
It doesn't have to recognize your model and s/n, just write them yourself.
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Caezer99 said:
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
Thank you... I'll try that once again.
sajjid_9 said:
Thank you... I'll try that once again.
Click to expand...
Click to collapse
If you still need help you can PM me... Make sure to keep trying because sometimes people cannot get the timing correct!
Hi, i have a question. My phone don't show me the option software installation when I connect it with my pc or Mac, and I have some other issues with my firmware. Can I reinstall the stock firmware with Odin without rooting my device and without tripping the knox?
My phone is: sm g935f
caezer99 said:
i have actually encountered this before.
Just do this:
• hold power & volume down until the phone turns off ( assuming that there is no way for you to battery pull )
• immediately without letting go of the power & volume down button, press the home button as well.
• if the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
thank you so much!!!!!!!! I thought my tablet died. Thanks so much!!!
Caezer99 said:
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
Thank you i can atleast boot into download mode thanks to your tutorial. now i have to get through a succesfull odin stock firmware instalation. which failed me before.
Caezer99 said:
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
Hi so i have this issue on my s8 but ive had it the BL and it still errors out on me have you got any other ideas of it do it.
I found a way you wouldn't expect. Run odin, flash a recovery, flash stock rom, and you good to go. Odin acctually find the device. .
sebbialsvikk said:
I found a way you wouldn't expect. Run odin, flash a recovery, flash stock rom, and you good to go. Odin acctually find the device. .
Click to expand...
Click to collapse
This worked for me on a SM-T510 (2019) tablet.
Hi, I'm using p585y and install official firmware but from another region because my region don't have update yet
After flashing everything works fine, then after restarting, the tablet won't boot it said something about fap lock or something
And now I cannot flash the same firmware again said it was block or something
I don't understand what triggered the fap lock
Is it because I accidentally tap check update after successfully flashed or restarted
Now it stuck and won't even turn off , any idea ?
Thanks
Find your proper firmware and flash it back in download mode with Odin. Press and hold power + volume down + home button
Thanks I'll try it, can it works even if current installed is 7 and the original region correct is 6?
And do you know what really happened? How to properly install with different region code?
x4080 said:
Hi, I'm using p585y and install official firmware but from another region because my region don't have update yet
After flashing everything works fine, then after restarting, the tablet won't boot it said something about fap lock or something
And now I cannot flash the same firmware again said it was block or something
I don't understand what triggered the fap lock
Is it because I accidentally tap check update after successfully flashed or restarted
Now it stuck and won't even turn off , any idea ?
Thanks
Click to expand...
Click to collapse
The FRP lock is the "theft prevention" security feature. It is too late now, but anytime you plan on flashing rather than letting Samsung update your tablet, you should enable "developer" and then turn on "OEM Enable". I'm hoping that you remember your Google login and password for the tablet because you'll need them.
As the other poster noted, you need to hold the Home, Vol Down and Power buttons to turn the tablet off. Then, as soon as the screen turns black, switch from Vol down to Vol up. (If you don't switch fast enough, it will just put you into Odin download mode. Try again.) If you switched in time, it should put you in the "Restore" screen. Choose "Factory Reset" and then reboot. If it tells you it can't reset because of the FRP lock, you'll need to go back to the Odin download mode by again holding Home, Vol down and Power for ten seconds, but this time don't switch buttons. When the green screen appears, release all button and press Vol up. Then use Odin to flash your original version of the stock ROM.
Then, the very first time you get a successful boot, you need to put in the Google login and password before it will let you proceed. If you don't remember them, you are in trouble.
I understand now, and I have solve it using original firmware and Odin using Samsung firmware downloader tool developed by xda member
Thanks for your help
Hello guys, I have a problem with my Galaxy Note 3 phone. Touch no longer works well. When I touch the phone, it does not respond at the same moment. It responds about two seconds later. The matter itself is with the touch buttons, the volume up and down button, the power button and the home button, the touch is a press extended on the screen, the problem I only face it in the operating system, but when I close the phone and go to the menu through which we format the phone, the volume up and down button and the power button are working normally. I temporarily solved the problem by installing another operating system, but after a week the problem returned again
I can't use my phone please help me
Post lacks details what model what firmware etc etc .
JJEgan said:
Post lacks details what model what firmware etc etc .
Click to expand...
Click to collapse
My original model of My note 3 is sm-n900 h3g
But now I'm using an installed rom (note 8 rom)
I don't know how to get the other informations
Flash stock rom and test .
How to do this?
but as you are using a custom rom just restore your backup .
Download stock rom and flash via Odin /
Firmware on many sites sammobile samsung- updates etc .
Instructions :
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
But the problem was present since the previous rom (the official ROM for the Note 3), the problem appeared suddenly, and the custom rom I was using last year(the custom rom that I'm using now) had no problems, the problem is present and sometimes when I restart the phone the problem disappears until I restart the phone again
Then you require a service repair shop .
Her is a video about the problem I face
https://youtu.be/t6jzcUCWbbQ