Hello guys, I have a problem with my Galaxy Note 3 phone. Touch no longer works well. When I touch the phone, it does not respond at the same moment. It responds about two seconds later. The matter itself is with the touch buttons, the volume up and down button, the power button and the home button, the touch is a press extended on the screen, the problem I only face it in the operating system, but when I close the phone and go to the menu through which we format the phone, the volume up and down button and the power button are working normally. I temporarily solved the problem by installing another operating system, but after a week the problem returned again
I can't use my phone please help me
Post lacks details what model what firmware etc etc .
JJEgan said:
Post lacks details what model what firmware etc etc .
Click to expand...
Click to collapse
My original model of My note 3 is sm-n900 h3g
But now I'm using an installed rom (note 8 rom)
I don't know how to get the other informations
Flash stock rom and test .
How to do this?
but as you are using a custom rom just restore your backup .
Download stock rom and flash via Odin /
Firmware on many sites sammobile samsung- updates etc .
Instructions :
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
But the problem was present since the previous rom (the official ROM for the Note 3), the problem appeared suddenly, and the custom rom I was using last year(the custom rom that I'm using now) had no problems, the problem is present and sometimes when I restart the phone the problem disappears until I restart the phone again
Then you require a service repair shop .
Her is a video about the problem I face
https://youtu.be/t6jzcUCWbbQ
Related
Hello Friends,
I am new user of XDE Development forum. If anything wrong then really sorry.
Anyway, I have an android device Samsung Galaxy Y GT-S5360. I need to install custom Rom. I have tried many times but failed. Here i am telling about the the thinks i have done already but didn't stressful.
I have downloaded
1.din3 v1.85.
2. Galaxy Y Rom from Sammobile.
That files only include one file called: S5360DDLA1_S5360ODDLA1_S5360DDLA1_HOME.tar.md5
3. I didn't find any
"pit" binary file
"DefaultCalDataWithBoot_...." md5 file
"PDA_...." md5 file
"MODEM_...." md5 file
"GT-S5360-MULTI-CSC-...." md5 file
But in a tutorial of Galaxy y flashing they said these files needed to Update Rom.
4. When i pressed at starting time Volume Down+ Home+ Power then show this message
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
5. My phone doesn't have rooted. Now i am unable to go to the recovery mode by pressing Volume Down+ Home+ Power Button.
I need a complete solution to How To Update My Galaxy Y Rom from PC.
Thanks in advance
find the thread of doky he has the stockrom...if you want a custom just flash one using CWM..
Step by step tutorial - Official updates with ODIN
alaminip said:
Hello Friends,
I am new user of XDE Development forum. If anything wrong then really sorry.
Anyway, I have an android device Samsung Galaxy Y GT-S5360. I need to install custom Rom. I have tried many times but failed. Here i am telling about the the thinks i have done already but didn't stressful.
I have downloaded
1.din3 v1.85.
2. Galaxy Y Rom from Sammobile.
That files only include one file called: S5360DDLA1_S5360ODDLA1_S5360DDLA1_HOME.tar.md5
3. I didn't find any
"pit" binary file
"DefaultCalDataWithBoot_...." md5 file
"PDA_...." md5 file
"MODEM_...." md5 file
"GT-S5360-MULTI-CSC-...." md5 file
But in a tutorial of Galaxy y flashing they said these files needed to Update Rom.
4. When i pressed at starting time Volume Down+ Home+ Power then show this message
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
5. My phone doesn't have rooted. Now i am unable to go to the recovery mode by pressing Volume Down+ Home+ Power Button.
I need a complete solution to How To Update My Galaxy Y Rom from PC.
Thanks in advance
Click to expand...
Click to collapse
--------------------
Downloadload DDLA1 from this link
http://hotfile.com/dl/146493408/c579b55/S5360DDLA1_S5360ODDLA1_ODD.zip.html
extract this zip file
Follow the steps - with odin installation
1. connect your mobile with pc
2. open odin
3. swithch off your mobile
4. go to download mode (Press Down volumu key + power + home buttons)
5. in odin, it showing com port in yellow color when your device detect.
Then browse files
PIT ---------- -totoro_0623.pit
Bootloader ---- BOOT_S5360DDLA1_REV05.tar.md5
PDA ---------- PDA_S5360DDLA1_REV05.tar.md5
Phone -------- MODEM_S5360DDLA1_REV05.tar.md5
CSC ---------- GT-S5360-MULTI-CSC-ODDLA1.tar.md5
then press start button.
I am not resposible for any damage or any other things to your devise, lot of people and me also try this method, there is no proble to me.
krishna_nirvana said:
--------------------
Downloadload DDLA1 from this link
hotfile.com/dl/146493408/c579b55/S5360DDLA1_S5360ODDLA1_ODD...................
extract this zip file
Follow the steps - with odin installation
1. connect your mobile with pc
2. open odin
3. swithch off your mobile
4. go to download mode (Press Down volumu key + power + home buttons)
5. in odin, it showing com port in yellow color when your device detect.
Then browse files
PIT ---------- -totoro_0623.pit
Bootloader ---- BOOT_S5360DDLA1_REV05.tar.md5
PDA ---------- PDA_S5360DDLA1_REV05.tar.md5
Phone -------- MODEM_S5360DDLA1_REV05.tar.md5
CSC ---------- GT-S5360-MULTI-CSC-ODDLA1.tar.md5
then press start button.
I am not resposible for any damage or any other things to your devise, lot of people and me also try this method, there is no proble to me.
Click to expand...
Click to collapse
Thanks friend. I am going to try out this. Could you please tell me:
1. About the Android Version for that link's ROM.
2. Is that Version able Bengali Language Support?
3. If electricity is gone during flashing time then any problem for Phone?
4. How many times need to finish the Flashing?
Friend I am waiting for your great response. Thanks again.
Lol, i pressed thanks instead of quote, Nevermind
1. About the Android Version for that link's ROM.
2.3.6
2. Is that Version able Bengali Language Support?
Its Indian ROM, didn't test for bengali language though.
3. If electricity is gone during flashing time then any problem for Phone?
Maybe you will have to flash the rom again
4. How many times need to finish the Flashing?
40 seconds to 1 min.
Aashik said:
Lol, i pressed thanks instead of quote, Nevermind
1. About the Android Version for that link's ROM.
2.3.6
2. Is that Version able Bengali Language Support?
Its Indian ROM, didn't test for bengali language though.
3. If electricity is gone during flashing time then any problem for Phone?
Maybe you will have to flash the rom again
4. How many times need to finish the Flashing?
40 seconds to 1 min.
Click to expand...
Click to collapse
Thanks friend. I have sucesfully flashed my phone.
But still i am facing problem. When i pressed (Volume Down+ Power+Home) buttons to go to recovery mode then still show this message:
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
Now i can't root the device. I want to root my device but can't access the recovery area (Volume Down+ Power+Home)
Please any solutions for this problem?
alaminip said:
Thanks friend. I have sucesfully flashed my phone.
But still i am facing problem. When i pressed (Volume Down+ Power+Home) buttons to go to recovery mode then still show this message:
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
Now i can't root the device. I want to root my device but can't access the recovery area (Volume Down+ Power+Home)
Please any solutions for this problem?
Click to expand...
Click to collapse
Volume Down + Power + Home ---- for Download Mode.
Volume UP + Power + Home ---- for Recovery Mode.
If you want root your mobile, you can go to recovery mode (Volume UP + Power + Home)
then select "update.zip" file from sd card, after then restart your mobile.
If you need updated.zip file, download form this link
http://forum.xda-developers.com/showthread.php?t=1378660
krishna_nirvana said:
Volume Down + Power + Home ---- for Download Mode.
Volume UP + Power + Home ---- for Recovery Mode.
If you want root your mobile, you can go to recovery mode (Volume UP + Power + Home)
then select "update.zip" file from sd card, after then restart your mobile.
If you need updated.zip file, download form this link
http://forum.xda-developers.com/showthread.php?t=1378660
Click to expand...
Click to collapse
Thanks Friend. I got that. That was my mistake.
Unable to recognise my usb port
Hi Friend,
Am also facing the same situation am also try to flash my samsung galaxy y i have downloaded all the files from the below given link, but when am try to connect my phone to pc its not recognising my phone i have updated my usb drivers in pc and i have tried the same process by connecting my phone to other pc/laptop too but its not recognosing.
Please let me know what can i do???
Thanks in Advance.
murali5115 said:
Hi Friend,
Am also facing the same situation am also try to flash my samsung galaxy y i have downloaded all the files from the below given link, but when am try to connect my phone to pc its not recognising my phone i have updated my usb drivers in pc and i have tried the same process by connecting my phone to other pc/laptop too but its not recognosing.
Please let me know what can i do???
Thanks in Advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?5kcxc1yovvl6740 try this driver
and i suggest you to use package according to your region. to avoid any csc related problem or data connection issue
visit our development thread and find dokys post
Hi Friend,
I have installed the drivers from the mediafire link. After that when am trying to connect my device its ot detecting saying "unknown device" in device manager.
what i have to to now..??
is there any thing that i have to do special for my device.
My samsung galaxy s4 (GT-I9500) does not go past the samsong logo with the i9500 and the samsong name.
I put a new simcard in my phone, and after my phone started it asked me to update the phone to a new release. I obviusly clicked OK.
my phone started updating, just like it normally updates, but this time the screen goes black in the middle of the update. I turn on my phone, and it starts installing, then suddenly it turns off again.
when i turn it on it loads the first boot logo, then i get a black screen like the phone was never on.
i tried everything:
battery of and on
wipe data/factory reset (from - volume up, home button, and power button)
wipe cache partition
and apply update from cache has an empty recovery folder.
i tried to boot in safe mode.
and nothing worked
I want to reinstall jellybean(or any os that works) on the phone, but since i can go to settings and allow usb debbuging, my computer does not recognize it even when it is on doenloading mode (volume down, home, and power button) from my ubuntu turmenal.
I am willing to root my phone or anything to get it working without paying money.
How do i fix this? please help!
yoseph1998 said:
My samsung galaxy s4 (GT-I9500) does not go past the samsong logo with the i9500 and the samsong name.
I put a new simcard in my phone, and after my phone started it asked me to update the phone to a new release. I obviusly clicked OK.
my phone started updating, just like it normally updates, but this time the screen goes black in the middle of the update. I turn on my phone, and it starts installing, then suddenly it turns off again.
when i turn it on it loads the first boot logo, then i get a black screen like the phone was never on.
i tried everything:
battery of and on
wipe data/factory reset (from - volume up, home button, and power button)
wipe cache partition
and apply update from cache has an empty recovery folder.
i tried to boot in safe mode.
and nothing worked
I want to reinstall jellybean(or any os that works) on the phone, but since i can go to settings and allow usb debbuging, my computer does not recognize it even when it is on doenloading mode (volume down, home, and power button) from my ubuntu turmenal.
I am willing to root my phone or anything to get it working without paying money.
How do i fix this? please help!
Click to expand...
Click to collapse
Hi mate ,
Plan A
Go here
http://www.sammobile.com/firmwares/
Download an official stock rom flash with Odin , should be fine , no warranty problem
Plan B
Follow this:
http://forum.xda-developers.com/showpost.php?p=52256997&postcount=4657
I made that post for Omega rom I9500 but it should be fine for any rom of your choice
Get root method of your choice
Get the recovery of your choice
Follow procedures for above
Pull the externalSD card if you have it , if not buy one , copy into it ( pc or another phone) the custom rom of choice and flash......
yoseph1998 said:
My samsung galaxy s4 (GT-I9500) does not go past the samsong logo with the i9500 and the samsong name.
I put a new simcard in my phone, and after my phone started it asked me to update the phone to a new release. I obviusly clicked OK.
my phone started updating, just like it normally updates, but this time the screen goes black in the middle of the update. I turn on my phone, and it starts installing, then suddenly it turns off again.
when i turn it on it loads the first boot logo, then i get a black screen like the phone was never on.
i tried everything:
battery of and on
wipe data/factory reset (from - volume up, home button, and power button)
wipe cache partition
and apply update from cache has an empty recovery folder.
i tried to boot in safe mode.
and nothing worked
I want to reinstall jellybean(or any os that works) on the phone, but since i can go to settings and allow usb debbuging, my computer does not recognize it even when it is on doenloading mode (volume down, home, and power button) from my ubuntu turmenal.
I am willing to root my phone or anything to get it working without paying money.
How do i fix this? please help!
Click to expand...
Click to collapse
You can't just use downloade mode in Ubuntu. You need to download Heimdall to use download mode. You can use this guide for flashin the stock rom.
http://forum.xda-developers.com/showthread.php?t=2317311
MAX 404 said:
Hi mate ,
Plan A
Go here
http://www.sammobile.com/firmwares/
Download an official stock rom flash with Odin , should be fine , no warranty problem
Plan B
Follow this:
http://forum.xda-developers.com/showpost.php?p=52256997&postcount=4657
I made that post for Omega rom I9500 but it should be fine for any rom of your choice
Get root method of your choice
Get the recovery of your choice
Follow procedures for above
Pull the externalSD card if you have it , if not buy one , copy into it ( pc or another phone) the custom rom of choice and flash......
Click to expand...
Click to collapse
for plan A, i am confused, should i put that in my sdcard, and open the recovery menu?
and for plan B, inorder for me to root my device i need to enable usb debugging, i cant do that, but will putting the phone in download mode and not enabelling usb debugging work?
yoseph1998 said:
for plan A, i am confused, should i put that in my sdcard, and open the recovery menu?
and for plan B, inorder for me to root my device i need to enable usb debugging, i cant do that, but will putting the phone in download mode and not enabelling usb debugging work?
Click to expand...
Click to collapse
Hi ,
Plan A
If for flashing stock rom , stock rom can only be flash by Odin
You need to be in download mode ( Turn off the Galaxy S4 and boot it into Download Mode by pressing and holding Volume Down, Home and Power buttons together. Once you see the Galaxy S4 Logo, release the Power button and continue holding the other two buttons. Click Volume Up to continue into Download Mode), have USB drivers installed in your PC , have the stock rom of choice in your PC ( what version you had before the problem?) and Odin program
See Odin Procedure
https://www.youtube.com/watch?v=bkonj2dICq8
Example of settings when flashing a stock rom
Country: Unknown
Version: Android 4.4.2
Changelist: 875187
Build date: Fri, 28 Feb 2014 12:23:39 +0000
Product Code: PNT
PDA: I9500UBUFNC1
CSC: I9500PNTFNC1
MODEM: I9500UBUFNA2
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Also read this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Plan B
No need for debbuging , you have to root ( using Odin) and you have to install a custom recovery ( using Odin) ...then after that you copy in your SDcard ( take SD card out , use your pc or other phone) the custom rom of choice , insert SD card again in your phone , enter recovery , go to the menu , choose install zip from SD card select custom rom and flash.
Either plan A or Plan B you do not have to enter in OS of the phone ( you cant anyway)
Read well all the threads before you do anything , you must be 100% clear , ask all the questions you need BUT read first until you have an idea of what you want to do
MAX 404 said:
Plan B
No need for debbuging , you have to root ( using Odin) and you have to install a custom recovery ( using Odin) ...then after that you copy in your SDcard ( take SD card out , use your pc or other phone) the custom rom of choice , insert SD card again in your phone , enter recovery , go to the menu , choose install zip from SD card select custom rom and flash.
Either plan A or Plan B you do not have to enter in OS of the phone ( you cant anyway)
Read well all the threads before you do anything , you must be 100% clear , ask all the questions you need BUT read first until you have an idea of what you want to do
Click to expand...
Click to collapse
Just a sidenote:
You don't need to root if you want to use a custom recovery. You can just flash the recovery and flash the rom you want.
please anyone help me
i was tying to install latest firmware G935FXXS1APG3 through odin
i got this messafe on me screen please check photo
Use the emergency recovery function in the smart switch pc software
i cannot boot into download mode
smart switch doesnt recognize samsung g7 edge nor does kies
thank you
alleshi said:
please anyone help me
i was tying to install latest firmware G935FXXS1APG3 through odin
i got this messafe on me screen please check photo
Use the emergency recovery function in the smart switch pc software
i cannot boot into download mode
smart switch doesnt recognize samsung g7 edge nor does kies
thank you
Click to expand...
Click to collapse
you need to reinstall the samsung drivers on your computer then plug in your phone, open smart switch and follow instructions.
Previously your phone installed the drivers, since you have a problem with your phone, you need to install the driver on your computer to recognize the phone not the other way around.
Emergency Recovery function with Smart switch
Hi
I got the same blue screen but my smart switch program doesn't recognise the model number and S/N.
The phone was purchased in India.
I disconnected, updated drivers and reconnected.
I have SM-J500F and it has Marshmallow 6.0.1
hsd1 said:
Hi
I got the same blue screen but my smart switch program doesn't recognise the model number and S/N.
The phone was purchased in India.
I disconnected, updated drivers and reconnected.
I have SM-J500F and it has Marshmallow 6.0.1
Click to expand...
Click to collapse
It doesn't have to recognize your model and s/n, just write them yourself.
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Caezer99 said:
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
Thank you... I'll try that once again.
sajjid_9 said:
Thank you... I'll try that once again.
Click to expand...
Click to collapse
If you still need help you can PM me... Make sure to keep trying because sometimes people cannot get the timing correct!
Hi, i have a question. My phone don't show me the option software installation when I connect it with my pc or Mac, and I have some other issues with my firmware. Can I reinstall the stock firmware with Odin without rooting my device and without tripping the knox?
My phone is: sm g935f
caezer99 said:
i have actually encountered this before.
Just do this:
• hold power & volume down until the phone turns off ( assuming that there is no way for you to battery pull )
• immediately without letting go of the power & volume down button, press the home button as well.
• if the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
thank you so much!!!!!!!! I thought my tablet died. Thanks so much!!!
Caezer99 said:
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
Thank you i can atleast boot into download mode thanks to your tutorial. now i have to get through a succesfull odin stock firmware instalation. which failed me before.
Caezer99 said:
I have actually encountered this before.
Just do this:
• Hold Power & Volume Down until the phone turns off ( assuming that there is no way for you to battery pull )
• Immediately without letting go of the Power & Volume Down button, press the home button as well.
• If the timing is not correct just retry.
Once you can get into download mode, you don't need the samsung software anymore. Just go online and find your default stock rom & bootloader etc and flash em'
Click to expand...
Click to collapse
Hi so i have this issue on my s8 but ive had it the BL and it still errors out on me have you got any other ideas of it do it.
I found a way you wouldn't expect. Run odin, flash a recovery, flash stock rom, and you good to go. Odin acctually find the device. .
sebbialsvikk said:
I found a way you wouldn't expect. Run odin, flash a recovery, flash stock rom, and you good to go. Odin acctually find the device. .
Click to expand...
Click to collapse
This worked for me on a SM-T510 (2019) tablet.
I was rooting to get snaptools, everything went good till i got xposed and now its stuck on the "powered by android" screen. Can someone help/
Press all buttons on your phone at the same time for a while. It will be off.
Download latest firmware for your phone from sammobile. Download Odin and tap AP ( or PDA ) and find your firmware.
Hold Volume down + Menu button + Power button for 3 seconds and u will see a download mode. Press volume up button then your odin's ID.Com box will be blue or yellow ( it changes with odin versions). Then press start and wait for 3 to 5 mins. It will be boot. Good luck.
Note : Make sure u have samsung drivers installed on your pc first.
senemir said:
Press all buttons on your phone at the same time for a while. It will be off.
Download latest firmware for your phone from sammobile. Download Odin and tap AP ( or PDA ) and find your firmware.
Hold Volume down + Menu button + Power button for 3 seconds and u will see a download mode. Press volume up button then your odin's ID.Com box will be blue or yellow ( it changes with odin versions). Then press start and wait for 3 to 5 mins. It will be boot. Good luck.
Note : Make sure u have samsung drivers installed on your pc first.
Click to expand...
Click to collapse
tried this already, getting "failed" in odin screen. I have the Samsung Galaxy A5-SMA500W ...
solved it , can someone link me a xposed framework for my version? so i dont go through this lol
i used kingo root to root my phone and originally encounted the back button s only works with spen issue , but about an hour later after restarting my phone and trying to unroot none of my buttons would work even using my s pen , now my power button no longer will lock my phone or bring up the restart /powerdown option, my volume buttons are unresponsive , my home button does nothing when powered on , and my back and menu buttons still dont respond , but the buttons work to do system commands , (ex:restore mode, or odin mode) so i know they dont need replacing, and phone is not in a case, idk anyone can help would be awesome
see your other post .
Please don't use very old stuff read first .
If you can get into download mode, verify the model # and flash the latest stock ROM from sammobile.com, updato.com, or Samsung-firmware.org using Odin.