he together,
ive build a Car PC with my raspberry pi and android 7.1 on it.
I is working well, but there are twi bugs
i have an globalsat BU353S4 USB GPS mouse. i am using the pl2303 GPSinfo APP. It is working but after reboot android is asking me if these app can use the usb device and i have to enable the mock location in these app.
Is there a app that is automaticly starting after every reboot and enable the mock location automaticly ?
The second problem is, i want to create a wifi hotspot with the Raspi.
Is there a way to enable the hotspot on boot ?
I tried it with tasker but the hotspot is online but i cant connect to it ( no dhcp ) after restart the hotspot mode it can be used.
thanks
regards
christian
Related
Have been struggling with Navizon and an inability to establish a virtual comm port in the set up. has anyone actually got Navizon working on WM5?
installs and runs fine for me, version 1.4.2.1. Never really used it though.
I can install it but am unable to set up a virtual com port - I assume you could get one selected and then interface that comm port to your mapping software? Which ROM are you running if you could? This virtual com port issue is driving me nuts
It wont work if you switch run an application that uses the COM port and doesn't close the port properly when closing, and then running Navizon. Also will not work if you have Wifi and Bluetooth GPS at same time. Also wont work if either bluetooth gps or wifi is connected when in activesync.
This is dues to limitation of Pocket PC. You can get this app off the Navizon Forums to free up a COM Port (eg IR - Do you still use that!?), however use at your own risk!!
cya
Is there any way to get this phone to automatically connect as a media device when I plug it into a PC?
Also, is there an app or mod that can turn off my PIN lock when connected to trusted wifi networks or bluetooth devices?
I know there's bluetooth and wifi unlocker but it's not compatible with the note 3 as far as I know.
I know tasker can probably do it, but I just can't wrap my head around that app. None of the profiles/settings I make ever do anything.
Hi!
Has someone ever tried to start the wireless storage mode manually (commandline)? I want to use it with the application "Tasker". Now I am enabling the Wifi Hotspot, if my phone is connected to my car handsfree via bluetooth. This works really nice. I now want to start the wireless storage module after the Hotspot was enabled with Tasker.
BR
Martin
Hello all,
This post is an addon to [Tool][Windows Only][Root] Android Reverse Tethering created by capslock66 so all the credits go to him. This addon is for people who are irritated because of the wired process and want to go wireless.
Please follow all the steps mentioned in [Tool][Windows Only][Root] Android Reverse Tethering and make sure you are able to use the reverse tethering using USB cable.
Steps:
Connect your mobile to your Computer/Laptop having a Bluetooth Connection using a USB cable.
Now open command prompt and enter these commands
adb tcpip 4455 (this can be any port you want)
Then disconnect the USB and Turn On Bluetooth Tethering (Setting->Wireless & Netoworks(more)->Tethering and Portable Hotspot->Bluetooth Tethering)
Now pair your device to computer/laptop and then open the bluetooth devices window.
Now establish a connection using access point and connect the computer/laptop to your mobile
You can see a Bluetooth Connetion in the Network and Sharing Center
Now open CMD and run this command ipconfig /all
You will see all the conenction available, now search for the bluetooth connection you previously saw in the network center
Now enter adb connect [defaut gateway of the bluetooth connection]:4455(or the port that you have specified earlier)
Now run the AndroidTool.exe and refresh for the devices, you can see your device listed there
Press connect and start browsing wireless
dear sir you dont know how many hours i spent to get this working ... thank you for your guide i don't know how to express my self enough to thank you
Hi. I want to capture wifi data with my Yotaphone and for this I need to turn the WIFI antenna into monitor mode, but I think this can't be donne with our Yotaphone 2. In alternative, a developer builded up an app for letting do this without the need to root or recompile your kernel with any driver, but it will only works with wifi chipset RTL 8187, but not on every phones.
The app is called ANDROID PCAP, and I want to post the link to the web but XDA don't let me do it for being this my first post xD
I want to ask if anyone had trayed this before I buy this antenna. Someone trayed it?
Thanks
I have Root and Android 5.0 (206 version)
Installed Wi-Fi PCAP Capture, and it says No USB device present (Alpha AWUS036NEH- led turns on, USB OTG not powered cable, I have no idea where my powered cable disappeared, probably Russian hackers).
Installed WiFiKill (Yotaphone internal WiFi) and I disabled my laptop's internet connection successfully just by enabling grab. If I also enabled kill, internet was back on, but wifikill was listing some pages I went on on my laptop (some, sometimes just addresses of the adds).
If I remember correctly, you were supposed to install something else with WiFiKill, nut sure anymore.
I haven't tested zANTI.
EDIT: Tested Alpha AWUS036NEH with powered HUB and it doesn't work.
The Wifi adapter you tried doesn't have the needed chipset. Your AWUS036NEH antenna has de RT3070 and the needed is RTL 8187, so it's impossible to work. ANd also, it's neessary to have a powered USB Host for achieve a working Usb antenna
For example the Alfa AWUS036H has the correct chipset.
About the wifikill app, I only see banners and other messing things.
Keep searching