I was wondering if this is possible. I've heard of people using ICS Control to turn it into a hotspot, but I no longer have a working WiFi card. I just got a new computer with Windows 7 and all I can do is use the built-in Internet Connection Sharing that comes with WinMo until I get a long ethernet cable to wire from my router to my room.
So I was wondering if it's possible to use the phone's ability to receive WiFi to share that connection with the computer. I'm sure there's some way for it to be done. Any suggestions?
I have the same question
same situation here.
After some searching, I've found a program called "Serialtunnel" and "wmtunnel" that is supposed to do just that, however I cannot find any working download link...
Let me know if you find anything.
http://www.wmwifirouter.com/
Will work as wifi to usb, making your phone a WIFI usb adapter. I use it with my desktop when hooked to my TV in the livingroom, rather than a 35 foot cord.
Its as simple as= plug in phone, start Wmwifirouter , touch wifi to usb button.
Battery charges while working so it doesn't kill it.
phone's ability to receive WiFi to share that connection with the computer can only be obtained if your phone allows to do so. check out the official site of your phone developrs. there will definitly be some considerations about this
Two solutions
Found two programs that do just this, both work on Windows Mobile (and unfortunately not on Symbian), but are supposed to do just what you're looking for.
ICS Control
Serial Tunnel
IF anyone figures out how to get this (converted) to run on a Symbian device... Thanks.
Anyone?
Bumping to re-ask question.
WIFI
i didt understand
ravichandrabr said:
i didt understand
Click to expand...
Click to collapse
I'm looking for a program that can "Wifi to USB" on a symbian (Nokia) phone.
In other words, I want to use my phone as a wireless adapter for an old pc without wifi.
would prob get more luck asking in a symbian forum
Hi
I found some topics about that but some are old ,
how can I plug ethernet cable on iconia , I was thinking about USB adaptor but I didn t find name of product wich works.
Is it a prob of iconia or andoid ?
thanks
You'd need drivers for any device. Kernel modules, dunno if the Android kernel has any built already though. Should be easy enough to get some of the most common ones compiled though.
Hi
you mean I buy one, go to website of the supplier and try to find driver for android ?
I didn t think it was so easy
the best device for this, wifi router
You just plug in the ethernet cable and than...go wireless
ah yes I tried to use USB but you are right WIFI router is an other way, and in this case probably easier thanks
an other question about this wifi router, is it possible to use with all network ?, I mean my issu is when I am at the hotel ( very often ) and have only ethernet cable to connect .
I'm going to guess this is a laptop your using. Set up internet connection sharing and establish an ad-hoc connection to the tablet....profit.
If you're at the hotel with a desktop for some reason you can always plug the wifi USB adapter into it as well.
today when I travel I have 2 laptops , company laptop which is totally locked and I can not anything and I carry my own . I wanted to avoid to bring mine and use tablet .
it s why maybe wifi touter is good idea but don t know if I can just plug on hotel network .
You should be able to, just have to config it as an access point. It will basically act as a switch with wireless.
Hi,
I am having a hard time trying to get a couple of USB devices to work properly on my headunit. One is a USB CarPlay dongle, and the other is an OTA tv tuner. Both USB devices get recognized by the headunit, however in the case of the first, it never gets passed a connection state where the dongle starts talking to the application. In case of the second, the OTA never finds TV stations after doing a complete scan.
USB devices like keyboards, mice, USB flash drives, even a webcam work fine. I contacted the manufacturer and they said they only support USB synchronous which may be the reason these devices can't work properly.
The unit is an Eonon GA7157 with the Allwinner R16 1.6GHz Cortex A7 Quad-Core CPU.
Questions:
Is it possible this is a valid claim?
My unit is rooted, can USB asynchronous be enabled via software?
I was also thinking this could be an OTG wiring issue, what do you think? I say so because the only way I could get the CarPlay dongle to work on my Samsung Tablet A, was with an OTG cable. A straight connector presented the same symptoms.
I am not too experienced with Android, so please be gentle
He was feeding you a load of horse manure.
Either that, or he meant something entirely different by "USB synchronous".
Precisely what do you mean by "get recognized by the headunit"?
What exactly *are* these two devices you are trying to use?
What *drivers* do they use?
Have you confirmed that the kernel is enumerating the devices?
Have you confirmed that the kernel is binding the proper drivers to them?
Have you confirmed that Android knows how to deal with the interfaces that the drivers are providing for these devices?
Have you confirmed that the interface permissions are such that a user application will be able to access it?
An OTG cable does two things;
1) It reverses the gender of the connector,
2) It sends a signal to the phone/tablet/whatever that it should switch its USB port from slave mode to host mode.
Nothing else.
Thanks for the tips. By recognize I mean that Android prompts me to confirm opening the accompanying apps when I plug in these devices to the USB port. E.g. I plug in the CarPlay dongle, Android prompts: do you want use Zbox (App) every time you use this device (Cancel or OK); I press OK and then the App stays in trying to connect mode forever.
The manufacturer has locked down USB debugging. Do you know of any apps (rooted or not) that will give me the information you pointed out?
thanks
It is unlikely that USB debugging is "locked down". More likely, its just because your USB device port is stuck perpetually in "host" mode on the wrong side of a USB hub, and therefore you can't connect to it. Try connecting to adb over IP instead.
I've never heard of any USB device on Android causing any kind of popup. That is very strange. Is it possible that the popup is being created by the program, i.e. "zbox"? Its possible that the system is sending a broadcast upon device enumeration, but the device access permissions are either wrong, or the kernel doesn't have the proper driver available.
luciusfox said:
It is unlikely that USB debugging is "locked down". More likely, its just because your USB device port is stuck perpetually in "host" mode on the wrong side of a USB hub, and therefore you can't connect to it. Try connecting to adb over IP instead.
I've never heard of any USB device on Android causing any kind of popup. That is very strange. Is it possible that the popup is being created by the program, i.e. "zbox"? Its possible that the system is sending a broadcast upon device enumeration, but the device access permissions are either wrong, or the kernel doesn't have the proper driver available.
Click to expand...
Click to collapse
Thanks again. I am including some pictures that may help explain the problem a little better. As far as the passcode, from what I can tell this unit has 3. One for the Advanced Car Settings, Developer Settings, and USB Debugging. The first 2 I found on another forum and are 123456 and the other 7890. The USB Debugging is an alphanumeric string which I haven't found anywhere, and the manufacturer refuses to release it. When I toggle the USB debugging on, I get prompted to input the passcode. I have tried a few codes but no go, the USB debugging switch goes back to the off position.
The other pictures show the USB port capabilities of the headunit. The unit has 3 USB ports: one is taken by the WiFi module, the other by a dashcam, and the remaining one is open and where I plugged in the CarPlay dongle. There is also another picture of the USB CarPlay dongle device plugged in and listed as Mass Storage Gadget. The dongle does have internal storage of a few MBs.
Finally, I include a picture of the application Zbox. This is the latest version and it starts automatically when I plug in the USB CarPlay dongle.
Well, I made some progress with the password for the USB debugging switch. To summarize:
Car Settings: 123456
Developer Options: 7890
USB Debugging: [email protected]
Now I just need to figure out how to make the USB port work properly. Any ideas? I have USB debugging access and the device is rooted.
Well according to your second-last picture, the device is being detected as UMS (Usb Mass Storage). I.e., like a usb flash disk.
VIDID of 0x0525:0xA4A5 looks to be an e-ink tablet called "Pocketbook Pro 903".
The problem may be that your "carplay dongle" is masquerading as something it isn't.
Well, the VIDID could be the problem; however, this same CarPlay dongle works fine on 2 other Android devices; moreover, a USB OTA tuner behaves the same way, meaning it does not work on the headunit but does on remix and a tablet.
Well guys, this unit is going back to the seller. After playing with it and not getting anywhere with customization and customer service, it’s out the door.
I am getting an xtron octacore px5 unit. It looks like these head units have better developer support.
Do you have the English version of 3.0 you can post?
bass_rock said:
Do you have the English version of 3.0 you can post?
Click to expand...
Click to collapse
You mean the Zbox firmware and software? if so, pm me, and I'll forward it to you.
isisyodin said:
You mean the Zbox firmware and software? if so, pm me, and I'll forward it to you.
Click to expand...
Click to collapse
Yea, and actually I was able to use the version on their site. It was al in English when I installed it and I’m now on version 3.0.2
bass_rock said:
Yea, and actually I was able to use the version on their site. It was al in English when I installed it and I’m now on version 3.0.2
Click to expand...
Click to collapse
Whats new on 3.0.2 compared to 3.0.0? Do you know what was updated?
isisyodin said:
Whats new on 3.0.2 compared to 3.0.0? Do you know what was updated?
Click to expand...
Click to collapse
According to Google Translate:
1. Optimize U disk upgrade USB recognition rate is higher
2. Optimize the phone connection, mobile phone recognition rate is better
3.carlife in the help page to add download guide
I was able to get it from here: https://translate.google.com/transl...=en&ie=UTF-8&u=http://zjinnova.com&edit-text=
bass_rock said:
According to Google Translate:
1. Optimize U disk upgrade USB recognition rate is higher
2. Optimize the phone connection, mobile phone recognition rate is better
3.carlife in the help page to add download guide
I was able to get it from here: https://translate.google.com/transl...=en&ie=UTF-8&u=http://zjinnova.com&edit-text=
Click to expand...
Click to collapse
My new Xtrons recognizes the Zbox dongle very quickly. I think it is now as quick as some of the dedicated Alpine and Pioneer units.
As far as software, crisper icons and bypassing the connection window would be nice option. It should only display when a problem occurs. One thing that is flimsy is the USB connector but no software upgrade will fix it. I am considering opening it up and soldering a better connector. Also, heat dissipation is an issue. It needs a heatsink. I may just add one when I crack it open.
I am looking forward to the next iteration with wireless CarPlay. Someday.
isisyodin said:
My new Xtrons recognizes the Zbox dongle very quickly. I think it is now as quick as some of the dedicated Alpine and Pioneer units.
As far as software, crisper icons and bypassing the connection window would be nice option. It should only display when a problem occurs. One thing that is flimsy is the USB connector but no software upgrade will fix it. I am considering opening it up and soldering a better connector. Also, heat dissipation is an issue. It needs a heatsink. I may just add one when I crack it open.
I am looking forward to the next iteration with wireless CarPlay. Someday.
Click to expand...
Click to collapse
Yea the update definitely enhanced it a lot. I used to have a pioneer and it feels close to the same now.
bass_rock said:
Yea the update definitely enhanced it a lot. I used to have a pioneer and it feels close to the same now.
Click to expand...
Click to collapse
Prior to 3.0.2, what firmware/software where you running?
he together,
ive build a Car PC with my raspberry pi and android 7.1 on it.
I is working well, but there are twi bugs
i have an globalsat BU353S4 USB GPS mouse. i am using the pl2303 GPSinfo APP. It is working but after reboot android is asking me if these app can use the usb device and i have to enable the mock location in these app.
Is there a app that is automaticly starting after every reboot and enable the mock location automaticly ?
The second problem is, i want to create a wifi hotspot with the Raspi.
Is there a way to enable the hotspot on boot ?
I tried it with tasker but the hotspot is online but i cant connect to it ( no dhcp ) after restart the hotspot mode it can be used.
thanks
regards
christian
I want to enable USB tethering on my Samsung Tab S6 Lite Wi-Fi (SM-P610) to create LAN with laptop so I can let SpaceDesk run with better stability. However after enabling USB tethering, Windows shows the LAN card (Samsung Mobile USB Remote NDIS Network device) as "cable not plugged", as opposed to my phone, Google Pixel 3, on which tethering and screen sharing work properly.
Is there any trick to enable proper USB tethering on this tablet?
I'll just reply to this in case anyone comes across it in the future through a search.
I found that Samsung Flow was interfering with being able to use USB tethering, and I had to force stop it to get it to work, I also installed the Samsung USB driver on my laptop but not sure if that made a difference.
However, I found the spacedesk connection worked better on wifi, not sure why, I might have to play around with it a bit.