Related
I have a Hipstreet W7 tablet (Windows 8.1), the model number is HS-7DTB34-16GB and it's all messed up. Apparently a clean install of Windows was a bad idea because Hipstreet doesn't provide drivers for their devices on their website or through customer support. Admittedly this is completely my fault but I think maybe one of you guys can help me... Does anyone else own this tablet, and if so, would anyone be willing to make a recovery image I can restore to? Pretty please? I've been struggling with this stupid thing since almost the day I bought it. I just want it to work again. If anyone has a system restore point or recovery image I can restore to I would be so grateful. Thanks so much for any help anyone may be able to provide.
-Alex
UPDATE
So the HP Stream 7 Tablet has almost identical drivers. They all install very nicely and make my Hipstreet W7 run almost perfectly.
Those drivers can be found right here.
I highly recommend the first two things you install (in this order) are the Intel Chipset Driver, and Trusted Engine driver. Both are available from that link.
These two drivers seem to wake up/discover a bunch of hidden/inactivated 'devices' in the device manager list. It also give you your battery meter back and starts treating your tablet like a tablet again.
If you don't do these two first the other drivers from the HP Stream 7 page probably wont install correctly..
Funny enough one of the drivers from the HP Stream 7 page is the Goodix Touch Driver, but that alone isn't enough to get your touchscreen to work. (I've tried with both MSSL and GOODIX active in the BIOS). We also need something known as the 'KMDF HID Minidriver for Touch I2C Device'. I'm pretty sure this is the driver that is keeping all of our touch screens broken. I can't seem to find a Windows version anywhere and jleech1990's driver back up INCLUDES it but has no idea what to do with it. After installing the rest of the HP Stream 7 drivers there aren't any unknown devices left so I'm not sure where this goes without an executable package to install it with so this is where I'm stuck. I hope my update helps somebody get a little further. I put a few hours into this the past couple days.
That's all I got guys, I'll keep an eye on this thread for the next week or so...
check your pm!
ANy news on the driver?
You guys have any tips or a procedure or two on how to do a clean install? A friend of mine mangled up his Hipstreet in an attempt to get around storage limitations, so any tips would be appreciated.
Ok, so mine have sorted itself out somehow - I have given up and was trying to use it with mouse and keyboard. I have used the ineternal update of windows and suddenly the toudhscreen came back to life
so here is what i did in case anyone is stuck BUT WARNING I have read thet this doesnt always work so your millage might vary... I think there might be regional differences...
anyway. I bought y hipstreet of ebay in the UK. I assume its a UK version
I have backed up reocvery disk to usb drive and foolishly tried to delete the images partition which broke my OS and it wont boot
I have downloaded from a torrent the windows with bing image (X19-57135_SW_DVD9_NTRL_Win_with_Bing_8.1_32BIT_Eng_Intl_OEM.img) and using rufus made a usb disk of it
using the tablet with a usb hub i have booted the tablet with into the USB stick (pressing DEL during boot takes you to BIOS and choosing boot device just like on any windows PC)
I have installed windows from the disk, deleting all partitions and letting windows re-partition the internal drive.
That went smoothly.
Next installed driveres from HP as per post 2 in this thread. after that I had one unidentified device in the device manager and i have used update driver option and directed it to the Backed up drivers from post 2 which i have download and unpacked ( jleech1990's driver back - link in post 2) - It updated the driver, showed it as KMDF HID Minidriver but gave me an error in device manager and the touchscreen did not work.
At that point I gave up and just got windows to do its updates and suddenly it all worked - I guess one of the updates sorted it out but have no idea
Also, I am not sure how the activation works on this but once I had internet working windows showed as activated... I know others had issues re activation...
moalem said:
Ok, so mine have sorted itself out somehow - I have given up and was trying to use it with mouse and keyboard. I have used the ineternal update of windows and suddenly the toudhscreen came back to life
so here is what i did in case anyone is stuck BUT WARNING I have read thet this doesnt always work so your millage might vary... I think there might be regional differences...
anyway. I bought y hipstreet of ebay in the UK. I assume its a UK version
I have backed up reocvery disk to usb drive and foolishly tried to delete the images partition which broke my OS and it wont boot
I have downloaded from a torrent the windows with bing image (X19-57135_SW_DVD9_NTRL_Win_with_Bing_8.1_32BIT_Eng_Intl_OEM.img) and using rufus made a usb disk of it
using the tablet with a usb hub i have booted the tablet with into the USB stick (pressing DEL during boot takes you to BIOS and choosing boot device just like on any windows PC)
I have installed windows from the disk, deleting all partitions and letting windows re-partition the internal drive.
That went smoothly.
Next installed driveres from HP as per post 2 in this thread. after that I had one unidentified device in the device manager and i have used update driver option and directed it to the Backed up drivers from post 2 which i have download and unpacked ( jleech1990's driver back - link in post 2) - It updated the driver, showed it as KMDF HID Minidriver but gave me an error in device manager and the touchscreen did not work.
At that point I gave up and just got windows to do its updates and suddenly it all worked - I guess one of the updates sorted it out but have no idea
Also, I am not sure how the activation works on this but once I had internet working windows showed as activated... I know others had issues re activation...
Click to expand...
Click to collapse
Thanks dude, I'll keep that in mind in case my friend asks me to do a repair on his Hipstreet.
Cannot even get mine to boot from USB... no idea why. I've tried using Rufus and the Microsoft Media Creation Tool....
It's a brick now... lol. Oh well.
hola tengo una Hipstreet W8 (Windows 8 totalmente brikeado
hola tengo una Hipstreet W8 (Windows 8 totalmente brikeado si alguien me puede dar orientación de que hacer los pasos a seguir y una imagen de recuperación por que no la tengo se los agradecería , no importa que tenga alguna falla de táctil lo importante es revivirla esta muerta
The hipstreet W7 has a hidden sector in its small drive. In that hidden sector are the restore to factory settings files. If your W7 unit becomes corrupted, look at the edge with the USB receptacle for a tiny hole labeled reset. Insert a thin paper clip and press. The unit will boot just like it was first booted when it was taken out of the box. Anything that was added will be gone. Keep it plugged in because it could take a couple of hours to reinstall everything.
hipstreet W8
Bobo39 said:
The hipstreet W7 has a hidden sector in its small drive. In that hidden sector are the restore to factory settings files. If your W7 unit becomes corrupted, look at the edge with the USB receptacle for a tiny hole labeled reset. Insert a thin paper clip and press. The unit will boot just like it was first booted when it was taken out of the box. Anything that was added will be gone. Keep it plugged in because it could take a couple of hours to reinstall everything.
Click to expand...
Click to collapse
Hola tengo una hipstreet W8 ese modelo tiene el agujero que tu dices por que sinceramente no se lo veo, si tienes una imagen te lo agradecería
Any chance you guys have got a reset your password tool for local users? daughters changed her password and forgot it, and i cant find a usable solution anywhere, as i cant seem to get into the bios to change the boot settings.
How frustrating!! I have a Hipstreet W8 pro tablet and the hdmi wasn't working - long story short I decided to do a factory reset. Bad idea - I left it plugged it as recommended and now it's not doing anything at all - it won't turn off or turn on. There's just a faintly lit screen when I press the power button - I've tried the power & the volume buttons but nothing is working. I tried calling Hipstreet but the number is not in service. I also checked all over the tablet and there is no small hole to reset. Help please!! EDIT: Well I don't know what I did but I kept pushing buttons and it came on saying it was loading windows!! Hopefully this works!!
compatible drivers pack
i found this driver pack, i think is the same motherboard of hipstreet w8
w w w . mvapple. com/ 117 ?category=567688
or direct download for windows 8.1
drive.google.com/file/d/0B1YZub5OaKkaWlV5ek9QNkF6ZlU
Driver booster 6 would also work nicely. no need to dig for drivers.
So i brought the phone about 3 months ago in Best Buy orlando everything was doing alright but yesterday y updated the phone, i was thinking about rooting it. I've always rooted my phones (moto g 2013, 2014, and 4g, samsung s3 s4 trend ) soo i know what i was doing, but then i downloaded the update via wifi and oficial sony notification, all worked good but then my phone restarted and then was where the problema begin, it showed me my a black page where all i can do is doing Autenticate, wifi settings and emergency call, ok they copping icloud what a pitty, everything good from that point, nice system against the thiefs but when i try to autenticate my username and all i clicked the option AUTENTICATE and a pop up show saying "My xperia helper desafortunately has stopped working" thats it, it doesnt let me do ANYTHING not even put a mail nothing i ve found some solutions but they didnt work i will leave them here so anybody can try and see if they work, no one worked for me, anybody got it ?
Here you can see your device but you cant locate it, nor play a sound, not anything ( coppying icloud and failing at it) https://myxperia.sonymobile.com/
First "solution" you would need the PC companion
"Para hacer una reparación de software usando una computadora con Windows (To make a software repair using a PC with Windows)
1 Make sure not to have your device connected to your PC and make sure it's charged, it's preferable being 100% charged. Go to http://support.sonymobile.com/global-es/xperiam/tools/pc-companion/ and install PC Companion in your PC.
2 Disconnect your device from the computer. Ignore any instruction of connecting your device to the PC until step 11.
3 Hit "Update Mobile/Cell phone or Tablet. Select "Start"
4 You'll read "The device coluldn't be found". Select "Repair my phone/tablet.
5 If asked, select your device and click on Next. if not, go to step 7.
6 You'll read a warning about losing your personal data. Accept that all data is going to be overwritten. Select "Next"
7 Mark the box to confirm that you have understood that you're going to lose all personal data, next, click Next. The application is going to prepare the update and, if necessary, download information from Internet. (This step took me ages, so try using a wired connection for making it faster, it's tons of info downloaded)
8 You are asked to follow instructions and, if necessary, make the poper steps to update the software of your device. DON'T CONNECT THE DEVICE YET! Mark the verification box and click Next.
9 Make sure your device is not connected to the PC. Verify that your device battery is at least 80%. Click Next.
10 If asked, select your device from the list and click Next. If it's not on the list, go to step 12.
11 Make sure your device is turned off and disconnected from the PC.
12 Connect ONLY the USB wire to the PC.
13 While you keep the indicated key, connect the USB to the device (it's the volume down key... KEEP IT PRESSED!!!) and keep the key pressed until you see the following message "The update for your device has started)
14 When the update has started, you'll read "stop pressing the key" indicated in step 14.
15 If you don't follow the step correctly, your device is going to turn on. If this happens, disconnect the device from the computer and start all over again from step 13.
16 Wait until the fixing procedure finishes. When it's finished, disconnect the device and turn it on again.
17 On your PC, click Next. If the fixing was correctly done, you'll read the following message "Your device has been updated". Click "End".
Second solution you would need Flashtool witch comes with xperifirm you have to download flashtool from here (it has to be the last version) download the firmware in xperifarm and then proceed to flash it
Last solution ONLY FOR US RESIDENTS, talk to the support of sony and they will tell you to deliver it to a Tecnic service
FOUND THE SOLUTION
Ok as i say in second solution, you would need Xperifirm downloading version 27.1.a.1.106, then dowload it and let it create a bundle HERE COMES THE TRIKY PART you have to choose the MAX USB BUFFER to the lowest *128K*, push flash and you are ready to go, dont panic it will take a time to restart the cellphone after you do it, glad to see sony doesnt care about their customers. Cheers for your phone again back at use!
Friends; I got the Abardeen V116 intelligent watch from China.
MT6735 processor, 512 mb ram 4 gb memory features such as.
However, the device is entirely in Chinese. I got English stock software from company. They sent a file and driver files to the SP Flash Tool, indicating that they can be installed.
However, how much did he try; In the off state, when I plugged the device into a computer, I could not show it to the computer.
I installed all the MTK Drivers. I even removed all USB drives in the system and installed only the MTK drivers. When I look through the device manager; There is an exclamation point on all of them. I update all the drivers manually but it does not change again.
But unfortunately, I open the SP Flash Tool, show the scatter file, select Firmware Upgrade option, click Download and install the Smart off clock on the computer but there is no movement.
My Computer - Manage - Device Manager does not move, so the exclamation point on the MTK PreLoader USB VCOM remains the same.
When the device was powered on, I tried to plug in the computer and install it, but it did not happen again.
In the open state; When I plug it into the computer, it loads the driver, it can see the programs in the clock.
Could you please HELP?
How do I upload this stock rom?
gostaria de saber se tem alguma maneira de salvar nossos Relógios Celulares dm 98.
O imei deles vão parar de funcionar aqui no Brasil por causa da Lei 9.472 da anatel
I have been trying for months to install a new ROM with the help of amazing XDA users such as @gouster3 @viktorsaari @Blefish YT9216B_00002_V004_20191012_HIFI_V3.zip on my head unit and not getting very far. I am hoping someone has had similar trouble to me and can assist. I think the breakdown is something to do with SP Tools and the drivers.
I have installed the recommended drivers from MediaTek SP Drivers v2.0 signed.zip, installed the cdc-acm.inf via device manager and the preloader driver.
Attempted Flashing Process
Installed Signed Drivers
Reboot
Open SP Tools (administrator permissions)
Select Download-Agent MTK_AllInOne_DA.bin from ATC_Flash_Tool folder
Select Scatter-loading File AC8227L_Android_scatter.txt from Firmware folder
Select BOOTIMG RECOVERY ANDROID
Click Download
Plug into USB Port 1
Reboot the HU
It just boots like usual, with the android logo. No activity in SP tools. Nothing downloaded, no flash progress at all. I am running Windows 10 64 Bit.
Other Methods
• XYAUTOUPG method with an SD Card and USB stick (been mentioned in another thread that this doesn't work with YT9216s)
• Android Upgrade is greyed out in settings
Cable Methods
• Purchased a Male A to A cable 4 Pin
• Home Made Cable
USB Ports
• USB 1
• USB 2
Rebooting
• Disconnected the battery
• Reboot with the reset button
• Reboot via car 'settings'
• Boot into recovery via Terminal
Windows Systems
• Laptop (Win 10 64 Bit)
• Desktop (Win 10 64 Bit)
Threads Exhausted
• ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB
• [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit
Developer Settings
• OEM Unlocked
• USB Debugging
• MTP Enabled
OK finally fixed. It was the USB cable that was faulty
Glad you got it working. Note for others, I had to take out the SD card on my HU, for some reason I could not flash it properly when it was inserted.
wooldogsinc said:
OK finally fixed. It was the USB cable that was faulty
Click to expand...
Click to collapse
Hi brother am happy you were able to solve the problem.
I have similar configuration. See this...
https://forum.xda-developers.com/an...-firmware-android-vers6-t4003935/post82805913
I am interested in taking a full system backup using SP FLASH tool. But I have tried almost everything you did but my SP FLASH TOOL doesn't detect it. However, MTK DROID TOOL detected it. Also it is detected as adb device not com port.
What am I doing wrong. Should I be in fastboot mode or switch off mode. I tried with normal ON condition.
Can you explain the complete process
@Smarty_009 if you can connect via adb, why not backup from adb?
I would trust that over a system dump from SPtools....seems so finicky.
BTW, I assume you are trying this with the unit disconnected from power...I lost mind before trying that.
Ipse_Tase said:
@Smarty_009 if you can connect via adb, why not backup from adb?
I would trust that over a system dump from SPtools....seems so finicky.
BTW, I assume you are trying this with the unit disconnected from power...I lost mind before trying that.
Click to expand...
Click to collapse
Hey. Thanks for your advice bro.
I tried with unit totally disconnected. Only usb connected to desktop. But com port appeared and disconnected immediately repeatedly in device manager. So I connected the head unit to car power supply and kept the car off so that only 12V supply and ground will be available and acc will be 0V. But it didn't detected at all. So I switched on the head unit and in factory settings changed between host and device alternatively then for short time it was shown in device manager but disconnected again.
So I can't use Sp FLASH TOOL.
Well I didn't knew that full system backup is possible from adb.
I will search on google.
If you have any details please help. Adb is working so I will do that.
@Smarty_009 you likely found this by now:
https://android.stackexchange.com/questions/28296/how-to-fully-backup-non-rooted-devices
Sorry, was busy fking up my perfectly working system :crying:
Ipse_Tase said:
@Smarty_009 you likely found this by now:
https://android.stackexchange.com/questions/28296/how-to-fully-backup-non-rooted-devices
Sorry, was busy fking up my perfectly working system :crying:
Click to expand...
Click to collapse
That's ok. We all get in to this once at least. Even I have done it many times. Without messing around you won't learn new things. I read your post what you did to your system.
Smarty_009 said:
That's ok. We all get in to this once at least. Even I have done it many times. Without messing around you won't learn new things. I read your post what you did to your system.
Click to expand...
Click to collapse
Well if you saw my post then you saw that I was able to push an image only AFTER shorting the test pins. Pics attached for 3 MB designs (9216,17,18)
If you wanna do a quick test, try a "Readback" first.
wooldogsinc said:
OK finally fixed. It was the USB cable that was faulty
Click to expand...
Click to collapse
Hello, i have the same unid 'yt9216C' could you install the "B" firmware on "C" unid versión? All is working fine? I just did a post looking for the firmware "C" version
wooldogsinc said:
I have been trying for months to install a new ROM with the help of amazing XDA users such as @gouster3 @viktorsaari @Blefish YT9216B_00002_V004_20191012_HIFI_V3.zip on my head unit and not getting very far. I am hoping someone has had similar trouble to me and can assist. I think the breakdown is something to do with SP Tools and the drivers.
I have installed the recommended drivers from MediaTek SP Drivers v2.0 signed.zip, installed the cdc-acm.inf via device manager and the preloader driver.
Attempted Flashing Process
Installed Signed Drivers
Reboot
Open SP Tools (administrator permissions)
Select Download-Agent MTK_AllInOne_DA.bin from ATC_Flash_Tool folder
Select Scatter-loading File AC8227L_Android_scatter.txt from Firmware folder
Select BOOTIMG RECOVERY ANDROID
Click Download
Plug into USB Port 1
Reboot the HU
It just boots like usual, with the android logo. No activity in SP tools. Nothing downloaded, no flash progress at all. I am running Windows 10 64 Bit.
Other Methods
• XYAUTOUPG method with an SD Card and USB stick (been mentioned in another thread that this doesn't work with YT9216s)
• Android Upgrade is greyed out in settings
Cable Methods
• Purchased a Male A to A cable 4 Pin
• Home Made Cable
USB Ports
• USB 1
• USB 2
Rebooting
• Disconnected the battery
• Reboot with the reset button
• Reboot via car 'settings'
• Boot into recovery via Terminal
Windows Systems
• Laptop (Win 10 64 Bit)
• Desktop (Win 10 64 Bit)
Threads Exhausted
• ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB
• [ROM] [ROOT] [TWRP] [GUIDE] YT9216B Chinese Android Head Unit
Developer Settings
• OEM Unlocked
• USB Debugging
• MTP Enabled
Click to expand...
Click to collapse
Hi I have made a video tutorial on how to make stock ROM backup
Mod edit: inaccurate video link.removed.
Hi friends,
Have you are observed overheating of touch panel of your car stereo or hangs in your Android car stereo or system not responding or application keep crashing etc.
Then this video is for you. I have done this small modification in my car.
I made a small hole on sides of AC vents such that cool air blows over the heat sink of Android car stereo and two cpu fans of 12V take power supply from same connector.
Whenever the car stereo is turned ON the fans also turn ON and blow cool air over the heat sink to keep it cool.
Hi I have made a updated video tutorial with added info on how to make stock ROM backup.
[UPDATE][ROM Dump] Stock ROM backup of Android Car Stereo | Memory Dump Procedure via flashtool
Smarty_009 said:
Olá, fiz um vídeo tutorial sobre como fazer backup de estoque de ROM
[MEDIA = youtube] _CDmSDhpJcw [/ MEDIA]
Click to expand...
Click to collapse
Estou tendo o mesmo problema, tentei várias roms e não inicia, antes que o logotipo do android aparecesse no bootloop depois de tentar restaurar da fábrica, então tentei reinstalar com algumas roms aqui via usb e agora é só uma tela preta. Alguém pode me ajudar?
good evening .
after a fail update the head unit power on and black screen , can i somehow wake it up?
maybe have some way to recovery it with pc?
its was mcu v:T3L.3.19-100-501-A49311-210322-ts(MM030)
android 9 -v8.1.1_20210430.162039_theme1.
how to starty update with brick black screen?
Firmware download V8.1.1-20211022
1) Unzip the file first, open the folder, and get the detailed firmware file
2) Copy the file to an empty U disk (there is no folder in the U disk), insert the U disk into the machine 6pin usb
3) Ground the square control wire (key1 or key2) on the power cord, press the RST button of the machine to restart the machine, and disconnect the ground after the update appears
I have an allwinner quad-core t3 p1, it's supposed to be Android 9 but one of the device info apps I had downloaded said it was 8.1(fake 9). I was trying to update to Android 10 and something happens during the update and now I only have a blank screen. It turns on and the screen comes on but it's blank. I tried doing what you explained up above, but it did not work for mine. When I plug in a flash drive to the USB the light on the flash drive only comes on for a second. How can I fix it?
localos said:
Firmware download V8.1.1-20211022
1) Unzip the file first, open the folder, and get the detailed firmware file
2) Copy the file to an empty U disk (there is no folder in the U disk), insert the U disk into the machine 6pin usb
3) Ground the square control wire (key1 or key2) on the power cord, press the RST button of the machine to restart the machine, and disconnect the ground after the update appears
Click to expand...
Click to collapse
I have an allwinner quad-core t3 p1, it's supposed to be Android 9 but one of the device info apps I had downloaded said it was 8.1(fake 9). I was trying to update to Android 10 and something happens during the update and now I only have a blank screen. It turns on and the screen comes on but it's blank. I tried doing what you explained up above, but it did not work for mine. When I plug in a flash drive to the USB the light on the flash drive only comes on for a second. How can I fix it?
same problem thanks
bittermeister said:
good evening .
after a fail update the head unit power on and black screen , can i somehow wake it up?
maybe have some way to recovery it with pc?
its was mcu v:T3L.3.19-100-501-A49311-210322-ts(MM030)
android 9 -v8.1.1_20210430.162039_theme1.
Click to expand...
Click to collapse
localos said:
Firmware download V8.1.1-20211022
1) Unzip the file first, open the folder, and get the detailed firmware file
2) Copy the file to an empty U disk (there is no folder in the U disk), insert the U disk into the machine 6pin usb
3) Ground the square control wire (key1 or key2) on the power cord, press the RST button of the machine to restart the machine, and disconnect the ground after the update appears
Click to expand...
Click to collapse
no working the screen still black and nothing happen after put usb stick and key 1 shorted to gnd after push on restart key
i have this problem too... black screen
localos said:
Firmware download V8.1.1-20211022
1) Unzip the file first, open the folder, and get the detailed firmware file
2) Copy the file to an empty U disk (there is no folder in the U disk), insert the U disk into the machine 6pin usb
3) Ground the square control wire (key1 or key2) on the power cord, press the RST button of the machine to restart the machine, and disconnect the ground after the update appears
Click to expand...
Click to collapse
Hi please reshare link V8.1.1-20211022 on page not found ..Thanx have a good day
Яндекс
Найдётся всё
disk.yandex.ru
localos said:
Firmware download V8.1.1-20211022
1) Unzip the file first, open the folder, and get the detailed firmware file
2) Copy the file to an empty U disk (there is no folder in the U disk), insert the U disk into the machine 6pin usb
3) Ground the square control wire (key1 or key2) on the power cord, press the RST button of the machine to restart the machine, and disconnect the ground after the update appears
Click to expand...
Click to collapse
Which pin should I ground ? Thanks
4. Green: steering wheel 1
or
11. Green: steering wheel 2
Please see the steps
localos said:
Please see the steps
Click to expand...
Click to collapse
Thanks brother.. I did everything as you advised... Still its NOT working.. Any other option ? Through keyboard or software or through reset button ?? or any combination ?
localos said:
Яндекс
Найдётся всё
disk.yandex.ru
Click to expand...
Click to collapse
Hi . Is this firmware match to my hu. My hu is T3-P1
Hola, en mi caso se instala la actualización, pero se queda en el logo android ..
Que debo hacer.?
Hello, in my case the update is installed, but it stays in the android logo ..
What should I do.?
Erre_c said:
Hola, en mi caso se instala la actualización, pero se queda en el logo android ..
Que debo hacer.?
Hello,
What should I do.?
Click to expand...
Click to collapse
in my case the update is installed, but it stays in the android logo ..
Hi, can anyone help me to get the AW_Driver.zip file
i need that file to install android device driver on my computer.
if anyone knows the link to download the file, please share it with me here.
Thank you
Fabian392 said:
i have this problem too... black screen
Click to expand...
Click to collapse
Dear friend,
do yo have android 12 update for android 11 car player of t3L.