Database Users

Hipstreet W7 Windows 8.1 Tablet Help! Recovery Image?

I have a Hipstreet W7 tablet (Windows 8.1), the model number is HS-7DTB34-16GB and it's all messed up. Apparently a clean install of Windows was a bad idea because Hipstreet doesn't provide drivers for their devices on their website or through customer support. Admittedly this is completely my fault but I think maybe one of you guys can help me... Does anyone else own this tablet, and if so, would anyone be willing to make a recovery image I can restore to? Pretty please? I've been struggling with this stupid thing since almost the day I bought it. I just want it to work again. If anyone has a system restore point or recovery image I can restore to I would be so grateful. Thanks so much for any help anyone may be able to provide.
-Alex

UPDATE
So the HP Stream 7 Tablet has almost identical drivers. They all install very nicely and make my Hipstreet W7 run almost perfectly.
Those drivers can be found right here.
I highly recommend the first two things you install (in this order) are the Intel Chipset Driver, and Trusted Engine driver. Both are available from that link.
These two drivers seem to wake up/discover a bunch of hidden/inactivated 'devices' in the device manager list. It also give you your battery meter back and starts treating your tablet like a tablet again.
If you don't do these two first the other drivers from the HP Stream 7 page probably wont install correctly..
Funny enough one of the drivers from the HP Stream 7 page is the Goodix Touch Driver, but that alone isn't enough to get your touchscreen to work. (I've tried with both MSSL and GOODIX active in the BIOS). We also need something known as the 'KMDF HID Minidriver for Touch I2C Device'. I'm pretty sure this is the driver that is keeping all of our touch screens broken. I can't seem to find a Windows version anywhere and jleech1990's driver back up INCLUDES it but has no idea what to do with it. After installing the rest of the HP Stream 7 drivers there aren't any unknown devices left so I'm not sure where this goes without an executable package to install it with so this is where I'm stuck. I hope my update helps somebody get a little further. I put a few hours into this the past couple days.
That's all I got guys, I'll keep an eye on this thread for the next week or so...

check your pm!

ANy news on the driver?

You guys have any tips or a procedure or two on how to do a clean install? A friend of mine mangled up his Hipstreet in an attempt to get around storage limitations, so any tips would be appreciated.

Ok, so mine have sorted itself out somehow - I have given up and was trying to use it with mouse and keyboard. I have used the ineternal update of windows and suddenly the toudhscreen came back to life
so here is what i did in case anyone is stuck BUT WARNING I have read thet this doesnt always work so your millage might vary... I think there might be regional differences...
anyway. I bought y hipstreet of ebay in the UK. I assume its a UK version
I have backed up reocvery disk to usb drive and foolishly tried to delete the images partition which broke my OS and it wont boot
I have downloaded from a torrent the windows with bing image (X19-57135_SW_DVD9_NTRL_Win_with_Bing_8.1_32BIT_Eng_Intl_OEM.img) and using rufus made a usb disk of it
using the tablet with a usb hub i have booted the tablet with into the USB stick (pressing DEL during boot takes you to BIOS and choosing boot device just like on any windows PC)
I have installed windows from the disk, deleting all partitions and letting windows re-partition the internal drive.
That went smoothly.
Next installed driveres from HP as per post 2 in this thread. after that I had one unidentified device in the device manager and i have used update driver option and directed it to the Backed up drivers from post 2 which i have download and unpacked ( jleech1990's driver back - link in post 2) - It updated the driver, showed it as KMDF HID Minidriver but gave me an error in device manager and the touchscreen did not work.
At that point I gave up and just got windows to do its updates and suddenly it all worked - I guess one of the updates sorted it out but have no idea
Also, I am not sure how the activation works on this but once I had internet working windows showed as activated... I know others had issues re activation...

moalem said:
Ok, so mine have sorted itself out somehow - I have given up and was trying to use it with mouse and keyboard. I have used the ineternal update of windows and suddenly the toudhscreen came back to life
so here is what i did in case anyone is stuck BUT WARNING I have read thet this doesnt always work so your millage might vary... I think there might be regional differences...
anyway. I bought y hipstreet of ebay in the UK. I assume its a UK version
I have backed up reocvery disk to usb drive and foolishly tried to delete the images partition which broke my OS and it wont boot
I have downloaded from a torrent the windows with bing image (X19-57135_SW_DVD9_NTRL_Win_with_Bing_8.1_32BIT_Eng_Intl_OEM.img) and using rufus made a usb disk of it
using the tablet with a usb hub i have booted the tablet with into the USB stick (pressing DEL during boot takes you to BIOS and choosing boot device just like on any windows PC)
I have installed windows from the disk, deleting all partitions and letting windows re-partition the internal drive.
That went smoothly.
Next installed driveres from HP as per post 2 in this thread. after that I had one unidentified device in the device manager and i have used update driver option and directed it to the Backed up drivers from post 2 which i have download and unpacked ( jleech1990's driver back - link in post 2) - It updated the driver, showed it as KMDF HID Minidriver but gave me an error in device manager and the touchscreen did not work.
At that point I gave up and just got windows to do its updates and suddenly it all worked - I guess one of the updates sorted it out but have no idea
Also, I am not sure how the activation works on this but once I had internet working windows showed as activated... I know others had issues re activation...
Click to expand...
Click to collapse
Thanks dude, I'll keep that in mind in case my friend asks me to do a repair on his Hipstreet.

Cannot even get mine to boot from USB... no idea why. I've tried using Rufus and the Microsoft Media Creation Tool....
It's a brick now... lol. Oh well.

hola tengo una Hipstreet W8 (Windows 8 totalmente brikeado
hola tengo una Hipstreet W8 (Windows 8 totalmente brikeado si alguien me puede dar orientación de que hacer los pasos a seguir y una imagen de recuperación por que no la tengo se los agradecería , no importa que tenga alguna falla de táctil lo importante es revivirla esta muerta

The hipstreet W7 has a hidden sector in its small drive. In that hidden sector are the restore to factory settings files. If your W7 unit becomes corrupted, look at the edge with the USB receptacle for a tiny hole labeled reset. Insert a thin paper clip and press. The unit will boot just like it was first booted when it was taken out of the box. Anything that was added will be gone. Keep it plugged in because it could take a couple of hours to reinstall everything.

hipstreet W8
Bobo39 said:
The hipstreet W7 has a hidden sector in its small drive. In that hidden sector are the restore to factory settings files. If your W7 unit becomes corrupted, look at the edge with the USB receptacle for a tiny hole labeled reset. Insert a thin paper clip and press. The unit will boot just like it was first booted when it was taken out of the box. Anything that was added will be gone. Keep it plugged in because it could take a couple of hours to reinstall everything.
Click to expand...
Click to collapse
Hola tengo una hipstreet W8 ese modelo tiene el agujero que tu dices por que sinceramente no se lo veo, si tienes una imagen te lo agradecería

Any chance you guys have got a reset your password tool for local users? daughters changed her password and forgot it, and i cant find a usable solution anywhere, as i cant seem to get into the bios to change the boot settings.

How frustrating!! I have a Hipstreet W8 pro tablet and the hdmi wasn't working - long story short I decided to do a factory reset. Bad idea - I left it plugged it as recommended and now it's not doing anything at all - it won't turn off or turn on. There's just a faintly lit screen when I press the power button - I've tried the power & the volume buttons but nothing is working. I tried calling Hipstreet but the number is not in service. I also checked all over the tablet and there is no small hole to reset. Help please!! EDIT: Well I don't know what I did but I kept pushing buttons and it came on saying it was loading windows!! Hopefully this works!!

compatible drivers pack
i found this driver pack, i think is the same motherboard of hipstreet w8
w w w . mvapple. com/ 117 ?category=567688
or direct download for windows 8.1
drive.google.com/file/d/0B1YZub5OaKkaWlV5ek9QNkF6ZlU

Driver booster 6 would also work nicely. no need to dig for drivers.

MXQ pro 4k 1g/8g RK3229 Android 6.0

Dear Guys, my Box is stuck @Rockchip Screen.
I either need dumped or official Firmware.
Can someone help Out?
Any help appreciated
Soldiaz

Unbrick/Upgrade MX Q-4k RK3229 5.1/6.0.1 Android TV Box
First of all, Hello my friend and RELAX i guarantee you that my guide will work
How to Unbrick or Update your MX Q-4K RK3229
1. Search on Google & download : RockChip_Batch_Tool_v1.8
2. Go to mxqproject.com/files/ (its an Index of /files)
2.a Open: Rockchip-3229-Recovery-Tools/
2.b Download:
Marshmallow_Update_Files/
or
Stock_Lollipop_Recovery_Tools/
2.c Download: DriverAssitant_v4.4.7z and install it instantly!!!
3. Get a Male2Male Usb Cable
4. Open RockChip_Batch_Tool_v1.8 with Admin Rights
5. Connect the Male2Male Usb Cable on your PC
6. Locate the AV button of your Smart Box
(its a hidden reset button accessible via Toothpick!
YES toothpick ^_^ )
SO FAR: You have install the Drivers and run the Batch_Tool, your Smart TV Box is in front of you, the Male2Male cable is connected on your pc only,and you have found the AV hole and you are ready to insert the toothpick.
7. Insert the toothpick on AV hole and hold it and plug the already connected on your pc Male2Male cable on the Usb Port that is on the left side of the the AV.
8. You will see that the Batch Tool discovered the connected device.
9. On the : FW Path add your .img and after that HIT Upgrade button.
10. Wait for it to finish the proccess and you have successfully upgraded or unbroke your TV Box :angel::angel::angel::good::good::good::good:

Thank for this solution, but where can i find the latest firmaware MX Q-4k RK3229 (6.0.1)?

I guess I did something stupid...
Hi all,
First of all, I have managed to boot into recovery mode and got that menu screen, where you have the wipe data/factory defaults and wipe cache partition.
My stupid thing: I did both... (both cache and data /factory defaults.
Now, I've followed dnbsoundsgo0d guide, but my device is not being recognized by the tool... I'm currently downloading an MXQ_4k_2017.ZIP file I found for the device, but, I'm wondering if by putting this on an SD card, if I will be able to update it without connecting to a PC.
Any word of wisdom is highly appreciated. Thanks!

fbc2805
Power the box off completely.
Open the tool on computer.
Hold down toothpick button.
While still holding button, connect usb to to both computer and box.
Device recognized.

CaptainBenSisko said:
fbc2805
Power the box off completely.
Open the tool on computer.
Hold down toothpick button.
While still holding button, connect usb to to both computer and box.
Device recognized.
Click to expand...
Click to collapse
Thanks, CaptainBenSisko! I'll try to do that in this way and get back with outcome.

i have android 7.1.2 for this device , I am not sure how can I share it

Hi,
I just buy rk3229, mxq pro 4k, rk322x-box. I have download some firmwares from many locations
My questions :
- Which is the best permormance firmware? I need to choose one for my device
- How can i modify the system? Is there any guide to modify the firmware or root/twrp etc?
Thnks

ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB

ROM / Firmware/ Brick Recovery for 7" Android Head Unit AC8227l YT9217 YT9218 1/16GB
Thanks everyone who contributed in my effort to fix my bricked device. Here is all that I have found useful in successfully reviving my device.
The files shared here are the ones that worked on my unit (see specs and pictures below) If your device is different, it may or may not work.
If the device has dedicated radio chip inside, the Firmware number will show as YT9218, if no radio chip, then it will show as YT9217
Note: if your device is not bricked, Make a full backup before trying another firmware.
I hope it helps. (donations are always welcome )
Memory dump:
firmware 20181222 HiFi: (Link) (thanks mazepa2000) (May 2019 update below)
Rooted TWRP firmware 20190523 HiFi: (Link)
Preloader (Boot_1) from other Similar Firmwares: (Link) <- Click again if it doesn't lead to the relevant post.
Download the one similar to your device's version.
Firmware via flash tool: Rooted TWRP 20190523 (Link) Thanks Maxkir
(You may need to remap side touch buttons in Factory settings (code 8888) -> Touch settings -> Click start -> Name of the button -> The button itself ->Repeat for all the buttons -> close -> ok).
Firmware for YT9213 Device: (Link) (Thanks pajurpl)
Update / Upgrade Files USB flash drive:
Firmware 20190522 HiFi: (Link) (Thanks foxgiggle , iSevenAuto)
Firmware 20190906: (Link)
MCU 3.1 (Link)(Thanks foxgiggle )
MCU 2.8 (Link) (Thanks lemmon and foxgiggle)
I hope it helps. (donations are always welcome )
Memory Dump Procedure via flashtool:
(Memory dump is only needed if you need full recovery from a backup. Otherwise you may only need to do the next part.)
Download and install MTK drivers. (Link)
Load scatter file and preloader (Link) in spflashtool. Press Ctrl Alt V , then go to Window and select "write memory". In file path select "user", in begin address put 0x0, In Region select the partition named "EMMC_USER". Hit Write memory. After that plug in the usb cable (connected to usb1 port). If the device is not detected, you need to power it on. If still not detected then you might need to short the two test points (see picture) (without power this time) and then plug in the usb cable. Remove the short when write process starts. Check if the issue is fixed. If its not fixed, then do the same to write boot2 and boot1 partitions as well. You may need to download Boot_1 specific to your original firmware from the link above.
Uploading Firmware (full or parts) via flashtool:
If you are uploading the firmware available in parts, you only need to upload "BOOTIMG" and "ANDROID" (SYSTEM).
You may also need to flash "RECOVERY". Remember to uncheck the preloader. Here is a nice instructions file. (Link) (thanks Maxkir)
There is more info and firmwares to chose from at 4pda forum.
Update / Upgrade Procedure via USB flash drive:
Copy the zip file (do not extract) to usb drive or microSD card, (formatted by SD Card Formatter). Connect to usb port 1 or 2. Go to Car Settings, System info. Click Android Upgrade.
--OR--
Extract the zip into a folder named XYAUTOUPG into the flash drive or microSD card, connect to usb port 1 or 2 and then reboot. Upgrade should start automatically. You might need to try with different USB drives or sd cards. For some reason this only works with certain usb and cards.
I hope it helps. (donations are always welcome )
MCU Upgrade Procedure via USB flash drive:
Extract the mcu file into flash drive or microSD card. Connect to usb port 1 or 2. Go into system info and update mcu.
Make a Full Backup/Memory Dump:
Open SPFlashtool, Select Memory Test Tab, Select only RAM Test (uncheck the rest), push start, and connect the unit. Save the information appeared, in a text file for later. (Read above "Memory dump procedure" for the usb connection setup).
Now go to ReadBack Tab, Double click on empty space next to tick mark, Select a folder where you want to store the dump file, and Type a name for the dump file you are going to creat, (ie. Boot_1, Boot_2, USER). Click Save. In next window "Readback block start address", select the region you want to make backup of (ie. EMMC_BOOT_1, EMMC_BOOT_2, EMMC_USER).
Start address is 0x0000000000000000
Length copy and paste from the text file you created earlier.
typically for Boot_1 and 2 the length is 0x0000000000400000
and for USER (16GB models) the length is 0x00000003a8000000
Click OK.
Now click on Readback and then connect the unit via usb cable. and Read process will start.
Do the same to make backup of all three partions. USER will take long time because its the largest partition.
RDS FM Radio:
Radio app with fixed RDS, channel names on buttons and HiFi: (Link) (thanks sjguk)
Copy to FMRadio directory /system/priv-app/FMRadio, rename to FMRadio.apk and change permission 764. (or 755 ?).
Channel name Editor: (Link) (thanks mclaught)
install as normal. You may need to install GalaPublicResources. Click top right dots.
I hope it helps. (donations are always welcome )
Multi Window Mode:
Go to root folder, look for build.prop. Open in text editor. Change the line ro.build.type=user to ro.build.type=userdebug.
If no such line is there, then simply add the line at the end. Save and exit. Go to Android settings, Developer options, look for multi window mode and enable it. Swipe down from the top of the window, Click on recent apps tile. You'll see the new multi window option there.
Subwoofer output Pin:
The default AUX_out pins are for mid range audio and is controlled by Mid slider in the mixer. The subwoofer output is on another pin (See Picture).
it is easy to remove one of the AUX_out pin and install it at the Sub output. this pin is controlled by Subw slider in the audio mixer.
Launchers UI1, UI2, UI4, UI5 (Link) (Thanks Maxkir)
Boot animation: (Resolution is 1024x600)
eg. (Link)
The animation preview didn't work for me, but I installed it anyway and it worked fine.
OBD Dongle Bluetooth Setting:
Open Bluetooth app, Click on settings, tap on the pin code "0000" and type in "1234" instead. Save settings.
Now search and connect the OBD dongle normally.
I hope it helps. (donations are always welcome )
Unit Specs:
motherboard marking YT9217 VER1.5 XY AUTO also 9218 VER2.4 XY AUTO near the antenna
Model no 8227L_demo android 8.1
Android YT9217C_00005_V003_20191402_HIFI
Kernel 3.18.22
DDR 1GB FLASH 16GB
CPU A7 1.3GHzx4
Amplifier AC7315 mos bile duct 45Wx4
AutoChip ARM AC8227L
Mediatek MT6323LGA
Kingston EMMC 16G

Im looking for the same ROM. Let me know if you find some info. Also Im looking for the AirRadio App. so I can use a Launcher.
Thanks

viktorsaari said:
the link takes me to the main page. and then its like finding needle in a haystack.
Click to expand...
Click to collapse
All relevant info about ROMs and flashing you can find in top header of this russian forum.
Look at the spoilers in the gray header layer and use Google translate to understand what is written there.
There are 3 ROM versions for the 8227L based head units. I downloaded and installed the oldest of the 3 (rooted and TWRP IMG included). Copy all files from the RAR to a flashdrive in root folder.
Turn off the head unit.
Connect the flashdrive to USB 1 slot of the head unit.
Turn on the the head unit.
The install process starts immediately after turning on.
It takes about 10 minutes.
When install process is ready, turn off the head unit.
Detach the flashdrive.
Turn on the head unit and it will boot with factory settings like a new device....
Note that there are also ROMs for flashing wit MTC flash tool downloadable.
But the versions for installing from USB sticks ( po russki - dla flashky) are more comfortable to install and I don't own a Windows pc. So this variant was my favorite method...
Regards and good luck...
Edit: if your unRAR program asks for a password for unpacking the RAR file, then use Eazy unRAR app from Playstore on your Android device - it ignores password lock in RAR file ...
Edit2: the 5th gray spoiler in the top header of the Russian forum hosts the links to the ROM RAR files...

The USB flash drive method didn't work for me, Device doesn't detect USB while booting up. I tried everything, connecting the test points, pushing reset button etc. to no avail.
SP flash tool does seem to work, I have tried uploading several available roms, only these three uploaded successfully,
full_8227L_demo-userdebug 6.0 MRA58K 1534513814 test-keys
Заводская прошивка под флештул от 09.11.2018 UI1 с переводом
20181224 TWRP ROOT перевод и эквалайзер от ноябрьской
but didn't turn on the device. Device turns on but I get a black (backlit) screen. What else is there to try?
bitstra said:
All relevant info about ROMs and flashing you can find in top header of this russian forum.
Look at the spoilers in the gray header layer and use Google translate to understand what is written there.
There are 3 ROM versions for the 8227L based head units. I downloaded and installed the oldest of the 3 (rooted and TWRP IMG included). Copy all files from the RAR to a flashdrive in root folder.
Turn off the head unit.
Connect the flashdrive to USB 1 slot of the head unit.
Turn on the the head unit.
The install process starts immediately after turning on.
It takes about 10 minutes.
When install process is ready, turn off the head unit.
Detach the flashdrive.
Turn on the head unit and it will boot with factory settings like a new device....
Note that there are also ROMs for flashing wit MTC flash tool downloadable.
But the versions for installing from USB sticks ( po russki - dla flashky) are more comfortable to install and I don't own a Windows pc. So this variant was my favorite method...
Regards and good luck...
Edit: if your unRAR program asks for a password for unpacking the RAR file, then use Eazy unRAR app from Playstore on your Android device - it ignores password lock in RAR file ...
Edit2: the 5th gray spoiler in the top header of the Russian forum hosts the links to the ROM RAR files...
Click to expand...
Click to collapse

No idea, what else you can try
If you can connect a PC to headunit and flashed a ROM with TWRP, may be you can use adb reboot recovery and clear data and cache via TWRP?
Hope you find a solution to boot your HU...
viktorsaari said:
The USB flash drive method didn't work for me, Device doesn't detect USB while booting up. I tried everything, connecting the test points, pushing reset button etc. to no avail.
SP flash tool does seem to work, I have tried uploading several available roms, only these three uploaded successfully,
full_8227L_demo-userdebug 6.0 MRA58K 1534513814 test-keys
Заводская прошивка под флештул от 09.11.2018 UI1 с переводом
20181224 TWRP ROOT перевод и эквалайзер от ноябрьской
but didn't turn on the device. Device turns on but I get a black (backlit) screen. What else is there to try?
Click to expand...
Click to collapse

No luck with adb either.
seems like my only option is if I could get the exact ROM for this device and flash it. The seller was less than helpful, so Aliexpress refunded me in full.
bitstra said:
No idea, what else you can try
If you can connect a PC to headunit and flashed a ROM with TWRP, may be you can use adb reboot recovery and clear data and cache via TWRP?
Hope you find a solution to boot your HU...
Click to expand...
Click to collapse

Received firmware files from seller, but its probably the update files, not the complete firmware. Unable to flash it via sp flash tool. (copy and paste the whole link until the .zip part)
http://download.seicane.com/doc/80/H5 Android 8.1 updated file.zip
Any ideas ???? my device is a brick at the moment, and doesn't recognise usb flash drive for updating.

Fixed.:victory:
Check the first post for detail.

So you flashed via sd card or flashtool?

viktorsaari said:
Fixed.:victory:
Click to expand...
Click to collapse
Hi How did you manage to fix it I have the same problem?
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
viktorsaari said:
Received firmware files from seller, but its probably the update files, not the complete firmware.
http://download.seicane.com/doc/80/H5 Android 8.1 updated file.zip
Any ideas ???? my device is a brick at the moment, and doesn't recognise usb flash drive for updating.
Click to expand...
Click to collapse
The link is dead!

SP Flash tool.
ric69 said:
So you flashed via sd card or flashtool?
Click to expand...
Click to collapse

Thanks but flashtool is impossible to me as I don't have any USB recognition on my pc

Please see the original post, I added the things I did to fix it.
the link is not dead, copy and paste complete until the .zip part
anyway this zip file didn't help.
Check the first post for helpful material.
coffer said:
Hi How did you manage to fix it I have the same problem?
---------- Post added at 03:47 PM ---------- Previous post was at 03:46 PM ----------
The link is dead!
Click to expand...
Click to collapse

ric69 said:
Thanks but flashtool is impossible to me as I don't have any USB recognition on my pc
Click to expand...
Click to collapse
Did you get your connection to the PC yet?
---------- Post added at 03:28 PM ---------- Previous post was at 03:25 PM ----------
viktorsaari said:
Please see the original post, I added the things I did to fix it.
the link is not dead, copy and paste complete until the .zip part
anyway this zip file didn't help.
Check the first post for helpful material.
Click to expand...
Click to collapse
Thanks for that, wow the memory dump is massive more than 4Gb! Did you use format and download or just download in the Flash tool? Do you know the files the scatter file took from the memory dump? So, you didn't use any files from the first download where you took the scatter file from? I'm still having a problem connecting to my PC may have to use the hardware forced (testpoint) method!

You need usb male to male cable, attach it to usb1 on the device. but not yet connect to pc. Run the sp flash tool. and select the correct scatter file. Then run which ever function you need. after that connect the usb cable to pc while connecting these two test points (picture) with a small piece of wire to each other. After it is recognised and operation starts, you can release the jumper wire.
ric69 said:
Thanks but flashtool is impossible to me as I don't have any USB recognition on my pc
Click to expand...
Click to collapse

viktorsaari said:
You need usb male to male cable, attach it to usb1 on the device. but not yet connect to pc. Run the sp flash tool. and select the correct scatter file. Then run which ever function you need. after that connect the usb cable to pc while connecting these two test points (picture) with a small piece of wire to each other. After it is recognised and operation starts, you can release the jumper wire.
View attachment 4769616
Click to expand...
Click to collapse
Thanks, when I use the scatter file from the first download and put it with the files in the second download it only picks up the preloader file nothing else?

Hi, Scatter file is only needed to make sp flash tool recognise the partition table on the device. no need to download anything via scatter file. press Ctrl Alt V , then go to Window and select "write memory". Set start address to 0x00 Use this to write Boot_1 , Boot_2 and User, to EMMC_Boot_1, EMMC_Boot_2 and EMMC_User respectivly. thats it.
I hope it helps.
Thanks for that, wow the memory dump is massive more than 4Gb! Did you use format and download or just download in the Flash tool? Do you know the files the scatter file took from the memory dump? So, you didn't use any files from the first download where you took the scatter file from? I'm still having a problem connecting to my PC may have to use the hardware forced (testpoint) method!
Click to expand...
Click to collapse

Hi, yes, I fixed it. Check the first post for details.
NicoApple said:
Im looking for the same ROM. Let me know if you find some info. Also Im looking for the AirRadio App. so I can use a Launcher.
Thanks
Click to expand...
Click to collapse

Thanks but for most of us , we don't have any USB recognition to pc (or android devices) there is any sounds when plug

ric69 said:
Thanks but for most of us , we don't have any USB recognition to pc (or android devices) there is any sounds when plug
Click to expand...
Click to collapse
have you tried the test point method yet, I will try it tomorrow or Monday?

Help for flash with USB-Key YT9216B Chinese Android Head Unit

Good morning all.
I'm trying to flash my firmware but it doesn't work.
I tried more configuration for the usb reader: reader or host but the result is the same.
I reboot with the small reset button and a wooden pick.
here are the pictures of my process:
1: I format the USB-KEY
2: I choose the Firmware and EXTRACT in the USB-KEY
3: I take out the XYAUTO-UPDATE.bin file from the XYAUTOPG file and I put it in the ROOT of USB-KEY.
4: I put the USB-KEY in the reader and I do RESET with the wooden pick.
I get the rebbot but no change to programming the HU and the HU turns on normally then
sets the time ...
5: when I place my USB-KEY in my PC I check the USB-KEY and I see the files "LOST.DIR and Android"?
Can you help me please
I try to redo the firmware of this thread:
https://forum.xda-developers.com/android-auto/android-head-units/everything-yt9216b-t4007063
My pc does not recognize the HU when I connect the usb cable A-A, I don't know why, nothing happens,
then I cannot do the procedure indicated with ATC Flash-tool...
I d'ont remember if there is an USB 4 pin or an USB 6 pin behind the unit, does it matter?
I've been looking for a week on this forum as well as the Russian forum and I can't find the solution

Boubou.co said:
Good morning all.
I'm trying to flash my firmware but it doesn't work.
I tried more configuration for the usb reader: reader or host but the result is the same.
I reboot with the small reset button and a wooden pick.
here are the pictures of my process:
1: I format the USB-KEY
2: I choose the Firmware and EXTRACT in the USB-KEY
3: I take out the XYAUTO-UPDATE.bin file from the XYAUTOPG file and I put it in the ROOT of USB-KEY.
4: I put the USB-KEY in the reader and I do RESET with the wooden pick.
I get the rebbot but no change to programming the HU and the HU turns on normally then
sets the time ...
5: when I place my USB-KEY in my PC I check the USB-KEY and I see the files "LOST.DIR and Android"?
Can you help me please
I try to redo the firmware of this thread:
https://forum.xda-developers.com/android-auto/android-head-units/everything-yt9216b-t4007063
My pc does not recognize the HU when I connect the usb cable A-A, I don't know why, nothing happens,
then I cannot do the procedure indicated with ATC Flash-tool...
I d'ont remember if there is an USB 4 pin or an USB 6 pin behind the unit, does it matter?
I've been looking for a week on this forum as well as the Russian forum and I can't find the solution
Click to expand...
Click to collapse
it this problem solve sir..if solve can u tell me how.. i have a problem with cable usb AA

Boubou.co said:
Good morning all.
I'm trying to flash my firmware but it doesn't work.
I tried more configuration for the usb reader: reader or host but the result is the same.
I reboot with the small reset button and a wooden pick.
here are the pictures of my process:
1: I format the USB-KEY
2: I choose the Firmware and EXTRACT in the USB-KEY
3: I take out the XYAUTO-UPDATE.bin file from the XYAUTOPG file and I put it in the ROOT of USB-KEY.
4: I put the USB-KEY in the reader and I do RESET with the wooden pick.
I get the rebbot but no change to programming the HU and the HU turns on normally then
sets the time ...
5: when I place my USB-KEY in my PC I check the USB-KEY and I see the files "LOST.DIR and Android"?
Can you help me please
I try to redo the firmware of this thread:
https://forum.xda-developers.com/android-auto/android-head-units/everything-yt9216b-t4007063
My pc does not recognize the HU when I connect the usb cable A-A, I don't know why, nothing happens,
then I cannot do the procedure indicated with ATC Flash-tool...
I d'ont remember if there is an USB 4 pin or an USB 6 pin behind the unit, does it matter?
I've been looking for a week on this forum as well as the Russian forum and I can't find the solution
Click to expand...
Click to collapse
You just have to boot the os with the usb stick(ota zip file and XYAUTO-UPDATE.bin) inserted. It will reboot spontaneously and install the new firmware. You don't have to use the reset.
I wanted to use the pc with spflashtool to upgrade the firmware to android go 9. I don't know if this is possible, cause my device only has 1 gb of ram. I do know if you want to use spflashtool(under download options select both checksums), you have to set it on download, connect the usb and press the reset button. it will start flashing at boot of the device.
A lot of parsing errors, so time for upgrading the firmware.
*edit: systempartition of android 8.1 go seems to be 1.5GB, so the 1200MB of android 9.1 go could very well fit with the 'Download only'-mode.
*edit2: to answer the original poster, there is this topic with a rooted, twrp real android 8.1 rom.
The way to install it is to use spflashtool, connect it through usb with the radio and flash the new rom. So first you have to install the usb drivers(driving signing turned off), then you have to run spflashtool, pick the scatterfile from the rom, and either choose 'wipe and download' or 'upgrade'. Then you select download, the spflashtool vagues, then you have to connect the usb with the radio usb. It should install without the radio turning on. So the radio can be left without power connection.
Just, there might be differences between the yt9216b and yt9216c revisions.

mark-1978 said:
You just have to boot the os with the usb stick(ota zip file and XYAUTO-UPDATE.bin) inserted. It will reboot spontaneously and install the new firmware. You don't have to use the reset.
I wanted to use the pc with spflashtool to upgrade the firmware to android go 9. I don't know if this is possible, cause my device only has 1 gb of ram. I do know if you want to use spflashtool(under download options select both checksums), you have to set it on download, connect the usb and press the reset button. it will start flashing at boot of the device.
A lot of parsing errors, so time for upgrading the firmware.
*edit: systempartition of android 8.1 go seems to be 1.5GB, so the 1200MB of android 9.1 go could very well fit with the 'Download only'-mode.
*edit2: to answer the original poster, there is this topic with a rooted, twrp real android 8.1 rom.
The way to install it is to use spflashtool, connect it through usb with the radio and flash the new rom. So first you have to install the usb drivers(driving signing turned off), then you have to run spflashtool, pick the scatterfile from the rom, and either choose 'wipe and download' or 'upgrade'. Then you select download, the spflashtool vagues, then you have to connect the usb with the radio usb. It should install without the radio turning on. So the radio can be left without power connection.
Just, there might be differences between the yt9216b and yt9216c revisions.
Click to expand...
Click to collapse

Как мне узнать, какой файл подходит для моего Media Center? Мой медиацентр: с доской:
XY Auto / YT9218 VER: 2.51 2018-11-30 ( BC-2 E466435.
Como faço para saber qual arquivo é o correto para minha central Multimidia?
Minha Central multimídia é: com a placa: XY Auto / YT9218 VER: 2.51 2018-11-30 ( BC-2 E466435.

Junsun V1/Pro Megathread

This thread is consolidating all the information of Junsun V1 and V1Pro devices scattered in the Android Head-Units forum. I want to write and extend this to make it easier for new people. It's sometimes difficult to find the right information.
Warning: Some of these commands are altering the system. If something goes wrong you can brick your device. Be sure you know what you're doing. I'm not responsible for any damages!
General Other Threads​Junsun V1​Junsun V1 Pro​Junsun V1 Pro Firmware (8259)​Junsun V1 Pro Firmware (8227L)​Junsun V1 (8667Q)​Firmware​Updating the device firmware​Junsun V1 Pro firmware files​Root​ADB connection​Root with Magisk​Writable System​

Updating Firmware​Preparation​
USB drive formatted as FAT32
Files for update (*.bin, *.upd) need to be in the root directory of the USB drive
Starting the Update​The update should start automatically when the USB drive is plugged in. A pop-up appears that says that an update will start. After a few seconds the device will reboot and install the update.
If this doesn't work, plug in the USB stick and restart the device with a needle in the reset button. When the device starts up move one finger on the touchscreen around and wait for a green detected message at the top of the screen. The update will start.
Problem solving​I don't have a *.upd file
That is OK, the file does mot contain any information. Just create a new empty file and rename it like the *.bin file. As example, if you have a 8259.bin create a 8259.upd file.
The device doesn't recognize my USB thumb drive
There are 2 USB connectors on the back of the device. If one does not work, try the other. Make sure your thumb drive is formatted as FAT32.
Firmware Files​This list is made by taking links from different firmware threads (found in first post). Every entry has a link to the original posts. Please be careful when flashing, the files need to match the correct CPU and screen resolution. If you have files for the normal V1 or different screen resolutions you can send me a PM.
Junsun V1 Pro | 8259 | 1280 x 720:​
DownloadOriginal PostVerified8259P_军灿UI02v1280x720-国外_v20_20210907.ziphere8259P_军灿UI02v1280x720-国外_v27_20211201.ziphere8259P_军灿UI02v1280x720-国外_v31_20220225.ziphere8259P_军灿UI02v1280x720-国外11_v1_20220323.ziphere8259P_军灿UI02v1280x720-国外11_v3_20220422.ziphere8259P_军灿UI02v1280x720-国外_v44_20220920.ziphere8259P_军灿UI02v1280x720-国外_v50_20221226.zipheremopfi
Junsun V1 Pro | 8227L:​
DownloadOriginal PostVerified8227L_8军灿UI03-国外10_v7_20210814.ziphere8227L_8军灿UI03-国外10_v21_20211130.ziphere8227L_8军灿UI03-国外11_v3_20220714.ziphere
Junsun V1 | 8667Q | 720 x 1280:​
DownloadOriginal PostVerified8667Q军灿UI02-国外-VHD720x1280_v11_20211207.ziphere8667Q军灿UI02-国外-VHD720x1280_v12_20220214.ziphere8667Q军灿UI02-国外-VHD720x1280_v13_20220510.ziphere8667Q军灿UI02-国外-VHD720x1280_v23_20220801.ziphere
Factory Reset​Settings -> Car Infotainment -> About Device -> Settings Icon -> Code 8878 -> Erase all Content

ADB Connection​Preparation​
Activate Developer options. You have to click a few times on the build number until you are a developer: Settings -> System -> About Car -> Build number
Activate USB debugging. Settings -> System -> Developer options -> USB debugging
Use the 4-pin USB connection on the back of the device. Connect with a USB A <-> USB A cable. My device had a female Mini USB adapter for using a Mini USB cable.
Connect​Use adb to connect to the device
Bash:
adb shell
Problem solving​ADB can't find any devices
It could be that the ADB connection with the device is not working. This means that the corresponding option is not set. This can be done temporary or permanent.
Temporary Connection
To make the connection with adb work temporary we can change the USB setting of the device. To do that we need to set Settings -> USB Preferences -> USB controlled by -> This device. No it should be possible to connect via ADB. The connection is temporary, because after a reboot it is gone and has to be set again.​
Permanent Connection
We can enable the connection permanently by changing a value in the secret menu. Go to Settings -> About Device -> Cogwheel (top right) -> Code 8878 -> Others -> USB2 Debug -> Enable​
Can't find USB Preferences
Go to Settings and click the search icon in top right corner. Type in usb and then click USB controlled by.

Root​Create boot.img​Connect via adb to the device and find the location of the boot partition. The star '*' has to be replaced according to your device. For my Junsun V1Pro it is bootdevice. In the next step we will create a copy of the boot partition. Please be careful with dd command. It will overwrite wrong files or partitions if you do a mistake.
Bash:
adb shell
su @#zxcvbnmasdfghjklqwertyuiop1234567890,.
ls -l /dev/block/platform/*/by-name/
dd if=/dev/block/platform/*/by-name/boot of=/sdcard/boot.img
Patch boot.img​Install Magisk apk on your device. I used Magisk v23.0 from here: https://github.com/topjohnwu/Magisk
Open the app and click on top right Install button
Then click next and choose Select and Patch File
Select your boot.img and let Magisk patch it.
Copy the new created file to your computer. The filename will be similar to magisk_patched_23000_***_boot.img
Bash:
adb pull /sdcard/magisk_patched_boot.img <older_on_your_computer>
Flash magisk_patched_boot.img​
Bash:
adb reboot bootloader
fastboot flash boot magisk_patched_boot.img
fastboot reboot
Writable System​To make the system writable we need to remount the partitions.
Bash:
adb shell
su @#zxcvbnmasdfghjklqwertyuiop1234567890,.
remount
Now we need to reconnect and then we can write to the system (i.e. copy a file)
Bash:
adb shell
cp /sdcard/myapp.apk /system/app

Reserved

Reserved

Hey all, I need help with my junsun v1 pro 4gb +64gb-mtk8259- I just had it installed and everything works except Bluetooth. I can make calls from unit and or my cell phone. Apparently the people I call can hear me but I can't hear them. On occasion as it dialing I hear the ringing for a second then it cuts out. Is this a hardware issue, install issue, or something I need to change in secret menu?? I've reached out to junsun with no luck. I fixed the issue with the swc thanks to this forum!! Hoping someone can help me. Car is chrysler 300c and phone is samsung galaxy note 20.

Cubanlink81 said:
Hey all, I need help with my junsun v1 pro 4gb +64gb-mtk8259- I just had it installed and everything works except Bluetooth. I can make calls from unit and or my cell phone. Apparently the people I call can hear me but I can't hear them. On occasion as it dialing I hear the ringing for a second then it cuts out. Is this a hardware issue, install issue, or something I need to change in secret menu?? I've reached out to junsun with no luck. I fixed the issue with the swc thanks to this forum!! Hoping someone can help me. Car is chrysler 300c and phone is samsung galaxy note 20.
Click to expand...
Click to collapse
Hi, I have the same problem, if you have found a solution to the problem please share it with me! Thanks!

I am trying to mess with the secret menu. Like bt sync type, volume, three is various options in there related to Bluetooth just don't want to screw it up worse. Hopefully someone can shed some light cuz if not I'm returning it. I'll have to pay to take it out....ughh...I love the look though, if not I would just get pioneer but it don't look stock like this

So I Brought it back to my installer and he fixed it. Apparently in my car the speaker inputs were reversed, that why I couldn't hear anyone through speakers. He told me some cars with 6 plus speakers have this problem when installing these type of units. Loving the unit now that's its all fixed.

Hello
I have Junsun V1 pro 4/64g and my unit is hanging on Google boot logo (Android 9).
Does some one know how to get to recovery to do wipe cash / do factory reset?
Thanks

I have the junsun v1 1gb, it does not enter the google play services.
I would like you to provide me with a ROOM image to update or factory reset.
Thanks!

bartekm01 said:
Does some one know how to get to recovery to do wipe cash / do factory reset?
Click to expand...
Click to collapse
I'm actually also looking for a way how to boot into the recovery. Haven't found one at the moment.
For your problem you could try and flash an update (or same version again). Description is in this thread.

Hi
Unfortunately updates are also not booting / updating while reseting. Plugging USB pendrive with update files to second USB port and against resting button still can't manage to update - radio is botting "normally" and ends up with bootloop

Try both USB ports.
Plug the drive in turn the device on and then move a finger on the touchscreen. I do a left right movement. If that doesn't work you will need to do it with the mtk tools and a scatter file.

Hi!! Are there any way to disable calls from SIM card ? Thanks

Hi, I purchased the Junsun V1 pro 6gb/128gb and am pretty happy with it. All the important things connected and worked straight away which was grand. One thing I wanted to check is the battery draining problem and the cutting of the 2 wires to prevent this. I found the Junsun diagram and on there it seems it's the red and orange wires (that "look" to run from the main black block to the black power block for the head unit). The query I have is those wires on my loom run from the canbus white block to the black power block in the head unit. Pictures attached to hopefully show this a bit better. Excuse the terminology Has anyone had any experience with this at all? TIA

Hi Everyone,
Can someone please help me how to factory reset code or the new firmware my Junsun v1 pro 9 inch 8G + 128 GB Radio chip MS98. i tried 8888 or 8878 but i can see no factory reset only factory setting.
thank you advance.

Hey does anyone know how to completey reset the AutoLink app? I tried disabling and enabling again but. Nothing works. I just want to get ride of Android auto activated from AutoLink.

Sowmaxwel said:
Hi Everyone,
Can someone please help me how to factory reset code or the new firmware my Junsun v1 pro 9 inch 8G + 128 GB Radio chip MS98. i tried 8888 or 8878 but i can see no factory reset only factory setting. View attachment 5572199
thank you advance.
Click to expand...
Click to collapse
I have the 6gb, not sure what chip. When you go into the menu after code 8878 it should say on the right in the middle "Erase All" I think. Then it asks you if you want to factory reset.