Related
As the title says, After I unlocked the bootloader, and flashed a 2.3.4 rom, My Atrix sometimes will go up to the blur phase of the boot and then it will restart, but most of the time will just do a boot loop on the Red Moto Logo at boot, I can go into fastboot and recovery no problem...
Thanks on any help...
same thing
i get the same thing every now and then but i can get fastboot and recovery so im good i guess.
Did you wipe before you installed your ROM?
Do a fastboot -w then reinstall your ROM.
also do a factory reset and make sure your on the newest recovery
quicklyspent said:
Did you wipe before you installed your ROM?
Do a fastboot -w then reinstall your ROM.
Click to expand...
Click to collapse
Did the fastboot -w and reinstalled the ROM and it is doing the bootloop the same, first boot goes up to the blur phase and reboots, and afterwards just does the boot loop up to the motorola dual core red logo.
TechnoNeto said:
also do a factory reset and make sure your on the newest recovery
Click to expand...
Click to collapse
I have the latest recovery, thanks...
Flash back to stock and follow my guide
Sent from my MB860 using XDA Premium App
TechnoNeto said:
Flash back to stock and follow my guide
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Where can I find your guide, and should I SBF 1.83 or what..
It's in general under video how to go... Sorry I'm on my phone
Sent from my MB860 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=1179506
Sent from my MB860 using XDA Premium App
Did you make sure to use tenfar's CWM instead of ROM Manager's? My 2.3.4 install also bootlooped, and that ended up being the issue.
Sent from my ATRIX running CherryBlur 1.3.
I'm still having issues, I have the latest Recovery, and I have tried to flash through Recovery and still get the boot loops...
Just Flashed via RSD the SBF 1.2.6 and still have the reboots, I think that my phone it's bricked, I can go into RSD, Fastboot, Recovery, everywere, I can flash anything, but when it boots, it does a bootloop everytime... I
If someone has an answer please help...
poorg said:
Just Flashed via RSD the SBF 1.2.6 and still have the reboots, I think that my phone it's bricked, I can go into RSD, Fastboot, Recovery, everywere, I can flash anything, but when it boots, it does a bootloop everytime... I
If someone has an answer please help...
Click to expand...
Click to collapse
Take out the battery for 30 sec and then put it back press vol up while you turn on.... can you please post what it show up in your screen after this?
Sent from my MB860 using XDA App
mramirezusa said:
Take out the battery for 30 sec and then put it back press vol up while you turn on.... can you please post what it show up in your screen after this?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Starting RSD protocol support....
poorg said:
Starting RSD protocol support....
Click to expand...
Click to collapse
Ok I will post a guide and follow up give 1 minute
Sent from my MB860 using XDA App
mramirezusa said:
Ok I will post a guide and follow up give 1 minute
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Thanks for the help, really appreciate this...
poorg said:
Thanks for the help, really appreciate this...
Click to expand...
Click to collapse
Ok maybe is time for clean starp up, DEEP CLEAN, I did this script for a friend and it help:
Need Windows PC and UNLOCKED BOOTLOADER (when I said unlocked bootloader need to be that everytime you boot you saw "unlocked" tag at the left top corner)
1. Download and extract/unzip the following file in a new folder (example C:\atrix):
http://www.filesonic.com/file/15073...signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
2. You will end after extracted/unzip the file with something like this:
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
3. Download this file "CLEAN_2.3.4_ATT.zip" and extract/unzip to the same location (example C:\atrix)
http://forum.xda-developers.com/attachment.php?attachmentid=673330&d=1312203457
5. Run the script "clean" and follow exactly all the instrucctions!
6. This will install a Pristine Official ATT GB 2.3.4/4.5.91
Done!
Hope it help
mramirezusa said:
Ok maybe is time for clean starp up, DEEP CLEAN, I did this script for a friend and it help:
Need Windows PC and UNLOCKED BOOTLOADER (when I said unlocked bootloader need to be that everytime you boot you saw "unlocked" tag at the left top corner)
1. Download and extract/unzip the following file in a new folder (example C:\atrix):
http://www.filesonic.com/file/15073...signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
2. You will end after extracted/unzip the file with something like this:
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
3. Download this file "CLEAN_2.3.4_ATT.zip" and extract/unzip to the same location (example C:\atrix)
http://forum.xda-developers.com/attachment.php?attachmentid=673330&d=1312203457
5. Run the script "clean" and follow exactly all the instrucctions!
6. This will install a Pristine Official ATT GB 2.3.4/4.5.91
Done!
Hope it help
Click to expand...
Click to collapse
Ok, but mine does not say unlocked right now, I did Unlock the bootloader but after I flashed the 1.2.6 SBF it does not say it!!!!
I noticed you posted that you actually have unlocked bootloader just make sure that when you turn on the phone it said in the left top corner "unlocked", if it is not that case just follow intructions on this post:
http://forum.xda-developers.com/showpost.php?p=15930466&postcount=1
download the script and select option 1 from the main menu and then option 3 and complete all the steps
so you can re unlocked the bootloader
then follow the instrucionts that I posted before here
mramirezusa Thank You.... As you stated, everything went smoothly and my phone it's perfect again, something I noticed, when it boots, it's does not say unlocked anymore shoul'd I do the procedure with the the script that you sent posted above...
i tried to instal a modified build.prop using root explorer but if i start me phone it just flashes black white black white....
Tried to connec the phone to odin and it doenst work
pleaseeeeeeeeeeee heeeeeelp ;(
Logcat please
Sent from my HTC Desire Z using XDA App
did you try booting in recovery?
RafayelG said:
did you try booting in recovery?
Click to expand...
Click to collapse
yep i get a messange that says: forced upload by key pressing
then it freeze
mintaeroboy said:
Logcat please
Sent from my HTC Desire Z using XDA App
Click to expand...
Click to collapse
how i do a logcat i can start me phone...
clarkkov said:
Your phone is fine, you just effed up your os. Boot to download mode and flash a clean firmware.
Sent from cramped soft keyboard!
Click to expand...
Click to collapse
Download yes -> connecting the phone nothing happens i flashed roms before so i know how to flash them
help plz
Edite: Hmm i started clicking crazy in download mode and my phone found it is now downloading the rom i hope it works....
Edite2: phone is now on boot logo i hope it works...
Edite3: Yihaaaaaaa he works again
Do i need to do a factory reset now?
Lol! They totally owned you. Correct solution is to pull the build.prop using adb when your phone is flashing black and white, remove the edits you made to it, then push it back. Reboot and its fine. And yes, you can use adb when its flashing black and white
Sent from my GT-I5800 using XDA Premium App
tanyh said:
Lol! They totally owned you. Correct solution is to pull the build.prop using adb when your phone is flashing black and white, remove the edits you made to it, then push it back. Reboot and its fine. And yes, you can use adb when its flashing black and white
Click to expand...
Click to collapse
Well that s a clever solution.
tanyh said:
Lol! They totally owned you. Correct solution is to pull the build.prop using adb when your phone is flashing black and white, remove the edits you made to it, then push it back. Reboot and its fine. And yes, you can use adb when its flashing black and white
Sent from my GT-I5800 using XDA Premium App
Click to expand...
Click to collapse
dude you are to slow
But with reflashing me phone it is faster
Hey guys, i have a few weeks experience flashing and all that leet stuff, but it seems i have a problem! I started to modify my ATRIX on 2.3.4, i unlocked sim, rooted, unlocked bootloader, and flashed custom recovery. I played around with a few roms, then i decided to update my fw to 2.3.6, well before i could do that i had to undo all mods so i ended up flashing a stock 2.3.4 fw and upgraded OTA. Im pretty sure that was my mistake... i may have needed an unlocked 2.3.6 sbf.. i re-rooted, and flashed cwm with rom manager, now when i go to boot in recovery mode i get failed to boot 2 starting rsd protocol. Everything is fine i just need to know where i messed up and how to get cwm running again. P.S. ive also been having an issue with my camera! I open the cam app and i get black screen, factory reset does NOT fix! Ive seen post's saying that the module is bad if that does not work BUT, when using flashlight app the flash lights up for a sec and then shuts off. When i switch to front camera it will stop responding, i'll click wait and after a min it will show image and i can take a pic(only with front cam). If i could get both issues solved i would be very grateful! If any other info is needed ill be sure to respond asap! Thank you in advanced for reading and assisting with my issues!
Sent from my MB860 using XDA
Get the cwm recovery img & flash with Fastboot and that should fix your recovery.
Sent from my MB860 using Tapatalk 2
Thanks for a reply but I did that as well and ended up getting an error. "Failed to process command flash:recovery error(0x180002)". I tried this method at first, received that error then tried to flash cwm through rom manager and recieved failed to boot2 starting rsd protocol.
Sent from my MB860 using XDA
Try unlocking bootloader again just to make sure ... Maybe that factory firmware closed hole on you when flashed.. Then flash cwm image ....
xRawwRRRRx said:
Thanks for a reply but I did that as well and ended up getting an error. "Failed to process command flash:recovery error(0x180002)". I tried this method at first, received that error then tried to flash cwm through rom manager and recieved failed to boot2 starting rsd protocol.
Sent from my MB860 using XDA
Click to expand...
Click to collapse
XRange said:
Try unlocking bootloader again just to make sure ... Maybe that factory firmware closed hole on you when flashed.. Then flash cwm image ....
Click to expand...
Click to collapse
+1. You'll always need to re-flash pudding BL after using an .sbf.
ghost_og said:
+1. You'll always need to re-flash pudding BL after using an .sbf.
Click to expand...
Click to collapse
Would you happen to have the file? 2.3.6
Sent from my MB860 using XDA
xRawwRRRRx said:
Would you happen to have the file? 2.3.6
Sent from my MB860 using XDA
Click to expand...
Click to collapse
Think what you seek lies here in Puddling thread..
http://forum.xda-developers.com/showthread.php?t=1136261
XRange said:
Think what you seek lies here in Puddling thread..
http://forum.xda-developers.com/showthread.php?t=1136261
Click to expand...
Click to collapse
adding to this: the automatic unlocker should work for you too. I had to re-unlock my phone after Motorola upgraded it when it was out for repairs. Worked like a charm.
(IF you're on AT&T)
ghost_og said:
adding to this: the automatic unlocker should work for you too. I had to re-unlock my phone after Motorola upgraded it when it was out for repairs. Worked like a charm.
(IF you're on AT&T)
Click to expand...
Click to collapse
Thank you soo much! I had to "re-unlock" bootloader! Now i have my custom recovery! One more thing have you or any other reader out there figured out a solution to my camera problem?
Sent from my MB860 using XDA
Try one custom roms see if that fixes camera, if not you might have carry phone for bad camera...
First, this is the thread in question Link
I ended up using this method to unbrick. I can now boot to recovery mode, however, twrp is unresponsive or the touch itself is just off, as in I'll click something, and itll click another thing. I cant swipe to do anything, etc. If the screen goes off, a giant twrp lock pops up asking me to swipe, and I cant really swipe, it's just frozen. For reference, I used this method Link
Any ideas? You guys have been awesome so far, btw. Totally gonna donate if my phone gets back on, regardless .
P.S- My twrp version is 2.6.3.2
I think its stuck, I minds well go and sell it -_-.
Have you tried using this method? http://forum.xda-developers.com/showthread.php?t=2667258
This will help you return to stock,
Or try this? http://forum.xda-developers.com/showthread.php?t=2432476
Sent from my LG-D802 using XDA Premium 4 mobile app
theDroidfanatic said:
Have you tried using this method? http://forum.xda-developers.com/showthread.php?t=2667258
This will help you return to stock,
Or try this? http://forum.xda-developers.com/showthread.php?t=2432476
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have everything ready to return to stock, but when I enter download mode, it flashes off and displays
Fastboot mode started
udc.start()
-- reset --
-- port change --
-- reset --
-- port change --
Fastboot: processing commands
Click to expand...
Click to collapse
bumpā¼
my phone was in my pocket and when i took it out it was just bootlooping. it bounces between google logo and the screen that tells you your device software cant be checked for corruption. not sure what happened. i cant get into recovery either. ive tried several toolkits with no luck. ive also tried using the flash all option when you download a factory image. is anyone able to help? phone is rooted and using stock 7.0
blankit said:
my phone was in my pocket and when i took it out it was just bootlooping. it bounces between google logo and the screen that tells you your device software cant be checked for corruption. not sure what happened. i cant get into recovery either. ive tried several toolkits with no luck. ive also tried using the flash all option when you download a factory image. is anyone able to help? phone is rooted and using stock 7.0
Click to expand...
Click to collapse
Can you flash recovery? I'd wait to see what others say possibly
Sent from my Nexus 6P using Tapatalk
We have a very similar issue. Have a look at my post and see if those tips help. I'm going to try them later on today. Good luck to both of us. Can you boot into fastboot?
Sent from my ONE A2003 using Tapatalk
im_Zak said:
We have a very similar issue. Have a look at my post and see if those tips help. I'm going to try them later on today. Good luck to both of us. Can you boot into fastboot?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
yes im on fastboot nowm running out of ideas.
Can you boot into your recovery from there?
Sent from my ONE A2003 using Tapatalk
---------- Post added at 04:04 AM ---------- Previous post was at 04:02 AM ----------
AuSSiELaMbChOpS said:
I would suggest you flash the factory stock system image using fastboot to get your 6P back up and running.
If you don't have the factory image they can be downloaded from here
Extract the factory image then use fastboot to flash
Code:
fastboot flash bootloader C:\angler\images\bootloader-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash radio C:\angler\images\radio-angler-angler-xx.xx.img
fastboot reboot-bootloader
fastboot flash boot C:\angler\images\boot.img
fastboot erase cache
fastboot flash cache C:\angler\images\cache.img
fastboot flash recovery C:\angler\images\recovery.img
fastboot flash system C:\angler\images\system.img
fastboot flash vendor C:\angler\images\vendor.img
Check out this guide which has all the information you need, especially around device encryption and flashing roms. Lastly gaining root is as simple as flashing SuperSU or Phh's SuperUser in TWRP.
I hope that helps, let me know if you get stuck.
Click to expand...
Click to collapse
I'm going to try this later. You should have a go too
Sent from my ONE A2003 using Tapatalk
im_Zak said:
Can you boot into your recovery from there?
Sent from my ONE A2003 using Tapatalk
---------- Post added at 04:04 AM ---------- Previous post was at 04:02 AM ----------
I'm going to try this later. You should have a go too
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
nope recovery doesnt work ive even tried flashing it with toolkits and no luck.
Try fastboot flash recovery and add the twrp file to terminal. Then press enter. It should flash the recovery.
Sent from my ONE A2003 using Tapatalk
my issue is that when im on command prompt and i type fastboot devices a serial number shows up, then when i try and type to fastboot commands i keep getting error like its not finding it. im not really good with fastboot thats why i always use toolkits. how do i get it to work?
blankit said:
my issue is that when im on command prompt and i type fastboot devices a serial number shows up, then when i try and type to fastboot commands i keep getting error like its not finding it. im not really good with fastboot thats why i always use toolkits. how do i get it to work?
Click to expand...
Click to collapse
If it is returning a serial number then you should be good. Are you sure you aren't making an error in the commands? Easy to do and would produce errors.
Sent from my Nexus 6P using Tapatalk
ultyrunner said:
If it is returning a serial number then you should be good. Are you sure you aren't making an error in the commands? Easy to do and would produce errors.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Exactly what I'm thinking..
Sent from my ONE A2003 using Tapatalk
ultyrunner said:
If it is returning a serial number then you should be good. Are you sure you aren't making an error in the commands? Easy to do and would produce errors.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
not sure. im typing exactly whats in that context box a few posts up and keep getting error message
What error do you get?
Sent from my ONE A2003 using Tapatalk
im_Zak said:
What error do you get?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
sys
it says error cannot load system.img
Seems like you could be running an older version of ADB, be sure to be running the latest version
Sent from my ONE A2003 using Tapatalk
im_Zak said:
Seems like you could be running an older version of ADB, be sure to be running the latest version
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
im downloading android sdk now to see if that helps
blankit said:
not sure. im typing exactly whats in that context box a few posts up and keep getting error message
Click to expand...
Click to collapse
Update your drivers, but also go to the linked guide and, aside from the filename, copy/paste the commands and follow the guide to the letter.
Sent from my Nexus 6P using Tapatalk
ultyrunner said:
Update your drivers, but also go to the linked guide and, aside from the filename, copy/paste the commands and follow the guide to the letter.
Click to expand...
Click to collapse
I swapped the phone I had warranty on it. According to google the phone was hard bricked and couldn't be fixed. If you guys are on the beta program do not update. Apparently when you update it, it will brick your phone.
blankit said:
I swapped the phone I had warranty on it. According to google the phone was hard bricked and couldn't be fixed. If you guys are on the beta program do not update. Apparently when you update it, it will brick your phone.
Click to expand...
Click to collapse
Good thing its sorted.
blankit said:
my phone was in my pocket and when i took it out it was just bootlooping. it bounces between google logo and the screen that tells you your device software cant be checked for corruption. not sure what happened. i cant get into recovery either. ive tried several toolkits with no luck. ive also tried using the flash all option when you download a factory image. is anyone able to help? phone is rooted and using stock 7.0
Click to expand...
Click to collapse
This issue...mostly happens when EFS partition gets corrupt.
EFS partition stores EFS data in 2 different blocks...if any of those block malfunctions..your phone wont boot up even if u flash stock firmware. The only way to fix it is restore the EFS partition backup...properly back to those respective partitions. Even service centre associates can't fix it. They'll offer u a replacement.
If anyone needs any help how to get a RMA under warranty using this EFS partition issue..PM me..haha.
StariX37 said:
This issue...mostly happens when EFS partition gets corrupt.
EFS partition stores EFS data in 2 different blocks...if any of those block malfunctions..your phone wont boot up even if u flash stock firmware. The only way to fix it is restore the EFS partition backup...properly back to those respective partitions. Even service centre associates can't fix it. They'll offer u a replacement.
If anyone needs any help how to get a RMA under warranty using this EFS partition issue..PM me..haha.
Click to expand...
Click to collapse
Yes! That's what happened to me. Luckily another XDA member helped restore my partition and now my phone works like its new