Related
I an always overprotective of a new gadget, and the Evo I am getting tomorrow will be no exception. I was looking through a blog and I saw an image of the front glass being removed. They noted how easy it is to remove, and lauded this as a feature. When I see this, all I can think is about the horror I felt when I found a stream of dust particles between the LCD and the glass on my iPhone and my Sprint Hero (and yeah, every single other thing I ever get, somehow).
I was thinking about how much I hate this and I want to avoid it this time around. For those of you that use full body cases, have you ever had this problem? For that matter, has ANYONE ever had this problem? I wouldn't be that surprised if it turned out I am alone in my compulsiveness.
Regards!
Pick it up and blow on it....jk
I highly doubt that anyone has had this prob. The reason why on the video it was like that is because he had already taken the screen of a million time before.
there is a tiny gap in the seam between the screen and the housing and i have already seen dust get in there
however i have not seen any dust under the glass (yet) and i have definitely been watching out for it. i'm hoping my silicone skin that covers the seam will help to prevent dust seepage (like it did with my hero, though my hero eventually got dusted regardless)
The n1 had this issue but i have not seen one post about evo with dust. My evo looks and feels like it was built 10x better then my n1.
i have some dust building up on top left corner...right below the hTc logo
I've had dust under my screen on the top left underneath the htc logo for like 2 weeks. I have no idea how it got there. Very aggravating
Sent from my EVO using XDA App
I use the seidio active case and have no dust. Had the phone since launch day
Sent from my PC36100 using Tapatalk
Evos have had issues with the screen rising up due to improper adhesion.
Solution involves using a hairdryer on hot to gently heat the adhesive while pushing down on the screen.
I am uncertain whether what I stated is the correct method or not. I read it some time ago, and I cannot remember where.
Just noticed quite a bit of dust in the upper left corner of the lcd... Can't unsee it now. Seems there are a bunch of reports of this exact area being a problem.
konfuzed said:
i have some dust building up on top left corner...right below the hTc logo
Click to expand...
Click to collapse
Same here. It is way less noticeable than my hero was.
Top left corner = dust
I noticed dust in the top left corner since 6 days after getting thephone
Sent from my PC36100 using XDA App
We need some pics of phones with this effect. My screen has the dust too. Its bs. It has never been dropped in dirt or near the beach yet when the screen is off its obvious.
Sent from my PC36100
So went to Sprint one day to ask if they could clean the dust that is in the top left corner (which has been done on my previous hero phone a lot) and i was told that they didn't have too because that is normal wear and tear. Like if your car was to get dust in it the dealership wouldn't be responsible. I just laughed in his face and said are you serious. I have all the protection plans and i demanded he go and clean it. Then he tells me that he has to take off my protection screen because he claimed that there was dust under that. Which i know how to put on a screen in dust free area and it was impossible for dust to get under it when the screen is on. This guy was an idiot. So he went in the back and came out moments later saying well we moved the dust off the screen but they couldn't remove it from the phone. I looked at the phone and the dust appeared to be gone. About 15 min later the dust was back. I am not sure was is going on but it is really wierd that all of you have the same dust in the upper left hand corner like mine. Anyone else go to sprint and ask about it? I am curious to here what they have told you. I am going to another sprint store to see what they say to me this time
There is another thread about the same thing. Its probably the headphone jack.
x iFLaWz said:
There is another thread about the same thing. Its probably the headphone jack.
Click to expand...
Click to collapse
It is because of the headphone jack. Its going to happen to all EVO's, just the nature dust and having a jack near the screen like that without being fully protected from the lcd screens.. Case's do help and I've heard of plugs coming out to plug into the jack to prevent dust and moisture getting inside.
All of a sudden silicone caps for ports don't sound so 1995 anymore. Im not sure its the headphone jack, to me it looks like its getting in around the earpiece/speaker. Not sure of that though.
My first handset had dust in the upper left corner.. one of the main reasons I asked for an exchange. My second handset has dust accumulating in the same spot but I'm trying to ignore it.. =\
The Evo I have now has dust in the bottom right corner. Noticeably a large piece about 2mm from the bottom. I got sent a replacement from sprint due to another issue, and right out of the plastic packaging i noticed a LARGE piece of dust right in the middle of the screen. Very annoying, and I sent it back. I cannot believe HTC would let this get through a quality inspection.
My MyTouch 3G Slide has a couple defects. The bezel or plastic housing that surrounds the upper portion of the device surrounding the screen has gaps in it around the seam that allows dust or any small particulate to enter under the screen. I have looked at several of the devices and they all have it to one degree or another. For instance, on my Slide I have 3 of these holes one of which has allowed a grain of sand under my screen. My wife's Slide has 4 of these holes or gaps and they are substantial on her phone. One XDA member has had this happen in the same spot that both my wife and my Slides are collecting dust.
While the light leaks or gaps in the bezel are a problem (for me) I think the real problem lies in the adhesive strip that connects the digitizer to the LCD screen. The way the digitizer is adhered to the LCD there shouldn't be any way for dust to have gotten in between the two pieces of hardware. I'd like to believe that it was just my particular phone but my wife's phone is having the exact same issue.
The phone really is phenomenal and I'm sure it was just a fluke that I've had issues (hoping so). Just keep an eye out for any issues similar to what I've mentioned above. I have really gone back and forth with this and I am definitely disappointed with having an issue(s) right out of the gate. My wife really likes the phone and after giving it some thought I like it as well ... a lot. I will return and reorder another couple Slides because this device is that awesome. Thanks for your thoughts/contributions to the thread.
I've tried to get some photos of the gaps but they are small and hard to photograph. To inspect your device: Go into a dark area and pull up your contacts, messaging app or a white web page in the browser with full screen brightness and inspect the seam of the plastic housing surrounding the touch screen on the top half of the slide. The gaps are almost like rectangular notches just below/above the corners of the screen in the seam. My theory is that these are artifacts from the plastic molding process that were exacerbated by poor/hasty assembly. I am definitely returning my Slides.
Its all true. After reading, and seeing the image posted by another member here, I checked my phone. I went into a dark room, opened up a site that has pretty much a white page, and I too noticed a gap at the bottom right hand corner of my screen. As of right now no dust/dirt has shown up under my screen, but what's to say that it won't later on. Heck, screw dirt. What if moisture finds its way in, and starts to fog up the screen from within? This could be a major problem later on down the road.
whew... just checked mine, noticed nothing like that, thank goodness.
[email protected] said:
whew... just checked mine, noticed nothing like that, thank goodness.
Click to expand...
Click to collapse
Strange, I've confirmed with everyone I know with a Slide (only black and white thus far) and everyone is seeing the same thing. What color Slide did you get? I wonder if the red Slide is manufactured differently? Anyway, that is awesome because I think the phone is GREAT other than the small gaps in the bezel.
I will say I took some compressed air and attempted to move the artifact under my screen just to see if air was moving through those gaps. The grain of sand or whatever it is did not budge. I'm just not sure what to think. I hate the idea of returning this phone ...
Mine is like that. Not that i care much as im returning it soon. But it does have gaps and light leakage all over the bottom of the screen, near the buttons.
i just check my and maybe i cant see it but i havent found anything... i have a red one
Re: My MT3G Slides (and others) Have A Defective Touch Screen Bezel
Initialy checked mine as well, black. I don't appear to have this problem either.
I will inspect further to verify.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
The only one I have is at the very bottom of the buttons, which might even just be the light hitting the glass at a specific angle. Other than that, no light leaks/cracks/blocks/whatever you call them on my screen area. Red Espresso.
I just swapped my white MTS for a Black one with no signs of cracks or light showing threw. TMO rep did not know of this problem and said he would send out an e-mail to other reps to let them know.
My day is now ruined
Yep, both bottom sides, right at the corners, above the buttons. I will not return it though, think instead a lil duct tape and some JB weld will do (seriously, a little touch of black silicon for a good seal, still sucks though). Screen cover seems to be blocking any dirt at the moment.
woow good looking out.. i was wondering how a spec of dust got to my screen. im planning on putting a piece of scotch tape over those regions (i have a red slide btw).
I have a red one and didn't see any leaks bottom or top. Thank goodness!
mtjnkee said:
seriously, a little touch of black silicon for a good seal
Click to expand...
Click to collapse
I hear you; I've been trying to find a way to keep the bezel sealed until I can get a case/cover for the phone. I literally have one tiny grain of sand at the bottom left hand corner of my screen. I so don't want to return the phone; I'm in love with the thing.
Glad to hear some of you have a better seal on the bezel.
I have some small light leak on the bottom, not an issue yet and I'm still within my 14 days so I might stop by the t mobile store tomorrow and try to get a replacement.
1. slight curved gaps at the corner edge where the top of the plastic curves down to turn into the sides. check
2. vertical rectangular light leak above home and genius keys. check
3. these lights only light up when hard keys are lit..when screen first lights up...light leaks are not there...once keys light up, light in the gaps light up. doesnt this mean the screen is sealed and there is no leak from the screen itself?
4. however, if you have a creaky top plastic housing, the seam running along the edge of the white plastic and grey plastic is not flush...on my 1st slide, i could see the screen light up in these 'cracks' of the seam...could debris get into screen this way then?
5. for those with debris already at lower left part of screen: pls do me a favor:
hold phone (sideways with back cover facing the ground) at just below eye level and try to see that left corner that is underneath the painted black surround of the screen..do you see white light when the screen is lit? if you look along the 'inside' edges along the rest of the phone, you will see that there should not be white light emitting out and should have a 'clean' look...there should basically be a solid black border...perhaps, if you guys have this white lighting show through, that could mean a separation of the screen somehow? btw, you do not have to be in a dark room to see this light along the inside edge....it is very noticable as the light comes thru where i think there should be no light. ps: when looking at the phone screen normally (ie from top down), screen looks perfect and this issue doesnt affect actual picture on screen.
my first slide had the light leaks but i didnt think anything of them as i thought they were related to the buttons only...but the issue i had spoke of in #5 above, i had this light coming thru along the whole edge of the bottom of the screen plus creaky top plastic housing.
I have dust under the entire screen of 2 Slides (Espresso), I couldn't notice it indoors but it is glaringly apparent when in the sun. The phones go back tomorrow. I've had my G1 for a year and a half with not a single spec of dust under the screen. I've had 2 MT3G Slides (Espresso) for 6 days and dust is under both screens; these devices are very cheaply made. Phone is lightning fast, screen size is great, physical keyboard is great, UI has some excellent features you can find nowhere else ... too bad I won't be keeping them. Been nice knowing you guys.
Seriously everyone be lucky that this is the only problem that people are having with this phone. You want to talk about shoddy build quality on first run devices, lets not even mention what the original PSP was like. If all that's wrong is that a few people have a bad bezel, then I'd say you made out well with the phone. NJAZ, just exchange them and have the employee test them at the store before you walk out with it, problem solved.
xenoletum said:
NJAZ, just exchange them and have the employee test them at the store before you walk out with it, problem solved.
Click to expand...
Click to collapse
Well I have to send them back as I ordered them online. 2 phones plus about 5 other people I know with these phones have dust blowing in under the defective bezel. It's unacceptable. Like I care about a PSP. What the hell does a PSP have to do with this? You didn't even comment on your phone having the light leaks/gaps or not. What is your point? You think folks should settle for inferior builds of an expensive phone? You can ignore whatever you'd like. I will wait for a better phone.
Wanted to add to my previous post about mine not having the leak... I have the red one.
Hello all,
I've got a week old Desire Z and the only thing thats bothering me is a few bits of dust in various corners of the screen, tiny bits not too large, other than this the phones perfect. I'm contemplating returning the device, however I'm worried the next one maybe worse off, and eventually dust is going to get under the screen it being a HTC, my previous Nexus One had the problem so did 3 other friends and a Desire, all which use similar sealing mechanisms.
Do any of you chaps suffer from the same problem?
Regards,
Akshay
I haven't noticed any dust in mine -- but I did in one of my previous phones.
As long as its not a big flake of dust right in the middle, I wouldn't sweat it. Like you said, the next one could be worse (unless you can go into a store and they'll let you open boxes and look)
Mine came with what appears to be a very slight scratch bottom right, but when the phone's on you cant see it at all
I have one on my screen too. It's not small, it's on the edge of the screen, right on top, below the HTC logo. When I pick up the phone, it's not visible much, but when you look at the phone lying on your desk then I see it and it bugs me.
I was hoping there is a way to get rid of it. Like turn the phone upside down and switch on vibration, or shake the phone. Any ideas?
schriss said:
I have one on my screen too. It's not small, it's on the edge of the screen, right on top, below the HTC logo. When I pick up the phone, it's not visible much, but when you look at the phone lying on your desk then I see it and it bugs me.
I was hoping there is a way to get rid of it. Like turn the phone upside down and switch on vibration, or shake the phone. Any ideas?
Click to expand...
Click to collapse
Anything in there is probably sandwiched in pretty good. Some things to consider trying are giving the phone some hard taps on the edge, to try to dislodge the dust and move it to a non-visible area (this could also shatter your screen or dislodge some important component) or maybe try dissembling the phone till you can get to the edge of the screen and try some high-pressure air...
aksd said:
Hello all,
I've got a week old Desire Z and the only thing thats bothering me is a few bits of dust in various corners of the screen, tiny bits not too large, other than this the phones perfect. I'm contemplating returning the device, however I'm worried the next one maybe worse off, and eventually dust is going to get under the screen it being a HTC, my previous Nexus One had the problem so did 3 other friends and a Desire, all which use similar sealing mechanisms.
Click to expand...
Click to collapse
I got dust in the bottom left hand corner of my screen. I went to sleep with a clear screen and woke up with a good portion of the corner pretty well dusted, about the diameter of a dime.
I sent it in for a warranty replacement, and it hasn't happened again with the new one in 5 months.
I'm done with HTC phones for now. Two of my last high end HTC phones had either dust or stuck/bad pixels and while materials seemed high quality, build quality was really poor. That dust was not there when I bought it, it must have made it in there, this should never be allowed to happen.
it had dust under the screen? As I was cleaning my screen today, I noticed two minuscule particles of dust under the screen. They are very close to the right and left edges of the screen, so Im assuming they somehow got through the small gap on those sides of the screen (if you look at the G2 on a flat plane, you notice a small gap between the screen and the side of the phone. The side is slightly more elevated than the screen at the center of the phone.). Im just worried about more dust getting under there, so should I exchange it under warranty. Other than that the phone has been flawless except for the typical "loose" hinge.
BTW the gap Im taking about is not a horizontal gap. Its a vertical gap, like the screen doesnt sit flush with the casing. Its noticeable on both sides, more towards the center of the device. If someone could verify with their phone it would be helpful.
Probably wouldn't bother me. I haven't had the issue of anything getting under my screen and I've had the phone since it was released. You can always have tmobile send you a replacement however there probably only going to send you a refurb G2. Some times it just pays to leave well enough alone but when its something that annoys you I can certianly understand.
Sent from my CM7 powered G2
I've accumulated quite a few dust particles under my screen. They're mostly collected in the bottom left corner but more are picking up on the right. Apparently this is a well known issue because of the gap between the screen and the housing.
I'm gonna line up a replacement for mine because its starting to get on my nerves. One of those things that once you know its there, all you do is look at it lol.
If I were you and its only two or so specs of dust, I wouldn't really wanna go through the hassle of an exchange until it got worse.
Decided Im not gonna exchange it over 2 small pieces of dust (the size of a thin pencil tip). Especially considering everything else is working fine and I will possibly get a refurb replacement.
I just went through a replacement nightmare all because of having dust under the screen.. Within the first couple weeks of me getting the phone, I started noticing a bunch of dust particles accumulating in the lower left corner of the screen. After a month, there was a noticeable line of dust, in a 1 inch x 1 inch square at the far bottom left. After the 2nd month, it was starting to be noticeable while the screen was on too, and was starting to make it tough to read that lower corner.
I went to a T-Mobile store, just to make sure that it would be covered under warranty. They said absolutely, and offered to swap it out in the store - I had a ton of data and text messages not backed up, so I said I'd be back once I backed everything up.
Well, I should have gone to the store again, instead I called customer service and processed it over the phone. They mailed me a replacement phone ASAP, actually got it the next day. I packed up the old phone, sent it back, and thought everything was done. 2 weeks later, I got a letter saying that it's not under warranty, that the phone had physical damage, and they had charged my account $295 for the new phone.. After a very frustrating hour on the phone with customer service, and going through the following: They wouldn't send me the old phone back, wouldn't let me talk to anyone who had access to look at the phone, wouldn't/couldn't even give me a description of what physical damage there was - they finally agreed to credit me back the $295.
Sorry for the long post, just getting all the info in there.
Short version - If you have a warranty issue, bring it to a store!
I had this problem with my first phone, Lots of dust under the bottom left corner. I called tmobile and they swapped it out with another phone no question. Its been over a month and I havent seen got anything saying the phone was not covered by the warranty. This phone seems much better than the first one so im being more careful with where I put it and how I handle it to minimize the chances of dust invading it.
Gap between the screen and the housing... Huh? Its sealed tight. No gap, no dust. Yours has obviously been bashed up.
dhkr123 said:
Gap between the screen and the housing... Huh? Its sealed tight. No gap, no dust. Yours has obviously been bashed up.
Click to expand...
Click to collapse
I could tell you for a fact this phone is not bashed up, its been babied since I got it (couple days before Christmas). As soon as I got it a Otterbox case was placed on it. Phone sits in my jacket pocket. So how it would get bashed up is beyond me.
BTW the gap Im taking about is not a horizontal gap. Its a vertical gap, like the screen doesnt sit flush with the casing. Its noticeable on both sides, more towards the center of the device. If someone could verify with their phone it would be helpful.
i will not change it
rtrtrtrtrtrtrtrtrtrtrtrtrtrtrtrtrtrtrt
Has anyone else noticed this? On the bottom right corner of my GS2 (Just next to the back key) the glass is visibly raised, In the other three corners the glass sits about .5mm below the bezel, in this corner however it sits about .5mm above it.
Light from the back key bleeds across the screen very noticibly, and is also visible around the bezel. I can press it back down into the correct position, but it usually rises back up within moments.
I'd rather not have to send it back given it was bought in the UK and I'm from Australia.
I have not noticed anything like what you have described so I think it's a bit faulty. I would suggest you return it!
Aired from my SGSII using XDA App.
After I reading this thread I started pushing at the area where the OP said was loose.
It does kind of feel flimsy at that area. This might be a design flaw.
That area feels fine here, i would defo send it back for repairs if you can.
Sent from my GT-I9100 using xda premium
In my case the bottom right corner is nor raised, it looks like the other three.
With my previous screen, it seemed to be a bit raised but the new screen is perfect (Knock On Wood)
Service Center is always the last option. Post a pic here before that.
Mine is not raised anyway.
Hi had the same issue with my screen, bottom right was lifting. I think the glue sticking the screen down weakens. I got a case so it's not that much of a issue.
AussieHusky said:
Has anyone else noticed this? On the bottom right corner of my GS2 (Just next to the back key) the glass is visibly raised, In the other three corners the glass sits about .5mm below the bezel, in this corner however it sits about .5mm above it.
Light from the back key bleeds across the screen very noticibly, and is also visible around the bezel. I can press it back down into the correct position, but it usually rises back up within moments.
I'd rather not have to send it back given it was bought in the UK and I'm from Australia.
Click to expand...
Click to collapse
I have the same problem here, and i saw a tutorial to replace the screen to check where it has been detached, but its too complex to disassemble. And i dont wanto send to service center and stay 1 month without the phone
I took a couple pics
shellshok said:
I have the same problem here, and i saw a tutorial to replace the screen to check where it has been detached, but its too complex to disassemble. And i dont wanto send to service center and stay 1 month without the phone
I took a couple pics
Click to expand...
Click to collapse
Samsung Germany didn't replace it because of that, so the only option is the Service Center and 1 Month no Cellphone
Or you really disassemble it yourself ^^
I experienced it with my i9003.. Only it raised on the top right corner.. Sent it to service center and got it back exactly 5 days later..
Sent from my GT-I9100 using xda premium