I have read a no. of posts regarding the subject problem but found no solution. My O2 Exec is not connecting to PC with USB. Even in Bootloader, it shows usb on top when connected to the cable but is not detectable to even MaUpgradeUt_noID.
One other thing is that when its connected to PC through USB and switched on, it stop the charging and only resumes if switched off again.
Can any body tell me how to know whether USB port is working properly and solve this problem.
Hi All,
Does anyone have any idea why my phone is not charging when I plug the USB cable to phone.
Earlier it use to charge.
Now I am able to sync the phone / transfer the data but not able to charge the phone.
is any setting changed? as generally I am online with my IM's so my battery drains early so when I am infront of my PC I plug it to USB, but from today onwards its not charging strange.
Need help
battery settings have you ticked the bock to not charge when connected to a pc??
to wisechap - usb to pc
wisechap said:
Hi All,
Does anyone have any idea why my phone is not charging when I plug the USB cable to phone.
Earlier it use to charge.
Now I am able to sync the phone / transfer the data but not able to charge the phone.
is any setting changed? as generally I am online with my IM's so my battery drains early so when I am infront of my PC I plug it to USB, but from today onwards its not charging strange.
Need help
Click to expand...
Click to collapse
dear wisechap
2 possibilities - if your wire has 2 cables, then one is for charging and one is for data.
the other option is that you have to terminate your relationship with the phone and establish a new one. if this is possible, then likely you will be asked wehther to delete sync files between the two or not. you may choose not to delete.
hope this helps.
regards
o2-lover said:
dear wisechap
2 possibilities - if your wire has 2 cables, then one is for charging and one is for data.
the other option is that you have to terminate your relationship with the phone and establish a new one. if this is possible, then likely you will be asked wehther to delete sync files between the two or not. you may choose not to delete.
hope this helps.
regards
Click to expand...
Click to collapse
This has NOTHING to do with charging.
Yes, check you didnt tick the box "do not charge when connected to a PC" in the power options.
If your battery is sufficiently depleted them the low output from your USB port may be too low to start the charging process.
Attempt the charge from wall charger and then try not to let the battery drain too much.
It is also posible that the power output from your USB port on your PC is defective, Usualy there is a fuse somewhere mounted on the mainbord and looks like a resistor. You can easy check this by using an other PC and connect the phone to that one. You don't need to intsall the ActiveSync on that PC to check. When that one is charging your batery..... Well you know.....
Oh, there is an other posible selution. Turn on your PC Joking
Are you plugging your phone into an external usb hub or directly into a usb port on the back of your computer?
I recently upgraded from an old tmo Wing and it would charge just fine off a port on my external usb hub. When I plugged my HD2 into the same port, it would not charge. If I connect my HD2 directly into the back of my computer, it charges just fine.
I'll be looking for differrent hub that provides more power and will allow for better charging.
if you POWER OFF the phone and it dose charge (orange led should appear near earpiece)
then your pc's usb and your usb cable are fine.
to fix,
go to 'SETTINGS'
and then at the bottom tap on 'ABOUT PHONE'
then tap on BATTERY'
then 'un-tick' the box that says "When the phone is on, do not charge the battery when connected to a PC"
USB Debugging mode might be on. I rooted my phone and forgot to uncheck that box and once I did, it started charging again.
How do I Stop it charging from the computer on Gingerbread Hyperdroid
Does anyone very kindly know how to stop my phone charging when it is connected to the computer with the Gingerbread Hyperdroid. Thank you.
Cgarging inducator but percentage stuck
My phone shows charging when connected to pc but the percentage doesnt move
Anyone else having the following issue:
When I connect via USB to something other than a wall outlet (e.g. PC, USB port in Car, etc.), sometimes it seems my wifi or 3g connections stop working. They display like they are working, but none of my apps are able to get anything from the net.
Any ideas what could cause this?
The only way I can recover from the situation is to reboot.
I have only noticed this when connecting the USB to my PC. I had assumed it was due to my tethering that the data was restricted to just the PC. If I notice the same issue when not tethering, I'll update the thread.
having the same issue..
Samsung Vibrant
Rooted
Frankin-Twiz (Eugene373) ROM
lose connection every couple of min when the phone is plugged into the computer via USB. If its plugged into the wall, no problems.
Anyone have any ideas?
When i connect my sgs2 to my pc through usb to access my files the kies screen comes on the phone and it says its connected, every other 5-10 seconds the connection gets reseted like if i am removing the cable and putting it back in.
any solutions to that?
Is it just me?
My computer will only see my phone if I plug it in while it (phone) is turned on. If I power on or reboot the phone (while connected via USB) it never shows up. I have to pull the USB cable and plug it back in. I tried multiple computers JIC and same results.
I AM rooted (systemless) if that makes a difference. I guess I'll unroot to see if it has any affect. Hopefully I don't have a bad device.
Rooting shouldn't have any impact. I have to toggle the USB connection type every time I plug into my PC. PTP seems to be the only one that recognizes for ADB. Fastboot works fine.
Thanks Fury, I did notice that as well. MTP would get toggled @ each plug in, but I'm talking actual connection detect not type of connection detected.
Can someone confirm normal operation on their 6P for me. I contacted Google and they are telling me it is working as designed. This would be the first phone that I have owned that is not recognized by a computer during reboot or power on. Charging seems not to be affected, only "data" connectivity...