can anyone confirm this pls ? is spigen case is compatible with official one plus 6t screen protector ? i purchased my phone yesterday and its arriving today ! so i wanna confirm before buying the case
Not running the that exact combo, but this time OP did make their 3D screen protector more case friendly. I'm running the SUPCase and the OP screen protector no issues. I had picked up the OP bumper case when I ordered my screen protectors just in case, but I quickly switched back to the SUPCase. No issues. Wouldn't imagine Spigen is that much different.
This is the one I'm using:OnePlus 6T Case, SUPCASE [Unicorn Beetle Style Series]
If your talking about Spigen Liquid Air then Yes I am rocking that case and stock screen protector.
It works great and the case is nice
Rocking the official tgsp and the spigen case. Works great, feel super premium.
Related
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
twodollars2 said:
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
Click to expand...
Click to collapse
As far as I'm aware, the consensus is that tempered glass protectors with the S7 Edge and the majority of cases simply don't work.
FYI, I've tried quite a few different protectors and cases here in the UK with next to no luck.
Just thought I'd inform you of my experience
So here's what I'm using.
https://www.amazon.com/gp/product/B01MZ02Y2I/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
It was easy to install and hardly noticeable.
The screen looses sensitivity and makes texting slightly difficult at times but still tolerable after you get used to it.
I also have an Otterbox Defender. I peeled the annoying screen protector off of that and installed this tempered glass protector then installed the case.
Flawless fit! Don't know anything about Zerolemon cases though.
Nevertheless, I'm very satisified with my tempered glass protector.
Also... perhaps your inquiry would have been better posted here: https://forum.xda-developers.com/s7-edge/accessories/curved-tempered-glass-screen-protector-t3320688
I used the original zagg glass and trimmed a bit off of the zerolemon case at the bottom chin.
It fits fine without modification with the new zagg glass.
I went to the extreme on this case because I been through more screen protectors than I should have. What I did was trim down the inner lip of the case that touches the screen. I used a slightly sharp exacto knife and slightly trimmed away all the hard edges surrounding the phone a little at a time. Doesn't take much trimming to get it to work. Mine looks not all that perfect but now my screen protector is good no problems
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
mine broke once & they even sent me a free replacement too!
grem323 said:
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
Click to expand...
Click to collapse
Here's a review of the GPEL one. It's not a positive one.
"Review of the GPEL Tempered Glass Screen Protector for the Samsung Galaxy S7 Edge"
https://youtu.be/FZxTsYOQdak
i've had this tempered glass for about 2.5 months now. I use it with the samsung leather case & the ringke slim case.
as long as you dont use a case that extends/overlaps over the edges this works beautifully!!
i wouldnt mind buying this again! Highly recommended!
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
the glass reviewed in the above video is gen 1 which i admit did have issues.
they had fixed most gripes with gen 2 since!
Zagg Invisible Shield glass curve for S7 Edge rocks!
mutiny said:
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
Click to expand...
Click to collapse
I ran into the same thing, but I found the Zagg Invisible Shield glass curve for S7 Edge. It is expensive, but it is a bit smaller than the others so most cases don't affect it and work fine. I'm currently using it with the SUPCASE Unicorn Beetle Hybrid case.
So far this is the only curved glass screen protector that works with anything more than a minimal case.
Here's the link to the screen protector:
https://www.zagg.com/us/en_us/invis...xy-s7-edge/glass-curve-samsung-galaxy-s7-edge
and the case:
https://www.amazon.com/SUPCASE-Unic...s=Galaxy+S7+Edge+Case,+SUPCASE+Unicorn+Beetle
Hey all, hope your day is going well.
(sorry for no links, XDA doesnt allow it)
I have bought my S8, I also have bought 2 cases and a screen protector....
The case i am CURRENTLY using Ottobox's Commuter series.
The second case i have is Spigen's slim fit case.
Now... Here is my question and problem, i know nothing much about protection and it seems i can only use a tempered glass protector on the Spigen one... As the Ottobox case doesnt allow it to fit.
Should I use the Spigen Case + Glass together? Or would it be better just to go without the tempered glass and use the Ottobox one.
OR should I get the RhinoShield? Just purchase the back and front tempered glass they provide.
Hey mate, here is my honest opinion.
I bought a Poetic slim case for my S8 and I couldn't be happier. It actually protects the edges cuz of the frame being a bit high. However, I bought a glass screen protector and unfortunately didn't sit flat on the screen. I had to press on hard to get it to work. I ended up taking the screen protector off and let be without it. Now, I'm telling you this because you might face the same issue with screen protector. Somehow these screen protectors aren't quite 100% designed to fit perfectly for these new devices. If I were you I would stick with something that will provide the best protection for you device. I will eventually buy a more rugged case for it, but for now this case it's more than enough. You said you bought a screen protector for the front and back? Let me know how the front glass works for you. If it works fine and it fits properly I might buy one too.
Protect your device mate and take care of it. ? cheers.
Bought the Whitestone Dome protector after hearing rave reviews about it. Paired it with the Spigen slim armor in all black, which is probably the most beautiful Spigen case in years.
Unfortunately, after a few hours I notice "spider cracks" forming at the bottom edge, and this morning a couple bubbles at the top edge. Turns out the lips on the slim armor is pushing against the protector ever so slightly. The sides are fine as far as I'm concerned. Just afraid that this is a "plague" that will eventually detatch the screen protector.
Other than that, it's a great screen protector and miles better than the ones I used to try on my s7 edge.
I've ordered the spigen air skin for my s9+ I hope it fits with my phone with my dome protector on.
Get the Spigen 593CS22943 Galaxy S9 Plus Case Neo Hybrid from Amazon. Works fine with the whitestone
welshandy2322 said:
Get the Spigen 593CS22943 Galaxy S9 Plus Case Neo Hybrid from Amazon. Works fine with the whitestone
Click to expand...
Click to collapse
Thanks for the suggestion, but I don't quite like the Neo hybrid series. Prefer something with a hard back. Used an ultra hybrid for my s7 previously but it turned yellow easily. Might consider cutting a little bit of the silicon on the slim armor instead...
I also purchased this whitestone some protector and a spigen air liquid case for a S9 plus.
Didn't applied the screen protector yet.
Now I am afraid of wasted my money with this expensive screen protector...
Enviado do meu SM-G965F através do Tapatalk
I have the Whitestone Dome glass on my Note 8 with the Spigen Armored clear case and it fits just fine. I'm hoping this holds to be true for the S9+ with that same case and glass.... I'll keep you guys posted. I'm thinking it should be fine though...
trenzterra said:
Bought the Whitestone Dome protector after hearing rave reviews about it. Paired it with the Spigen slim armor in all black, which is probably the most beautiful Spigen case in years.
Unfortunately, after a few hours I notice "spider cracks" forming at the bottom edge, and this morning a couple bubbles at the top edge. Turns out the lips on the slim armor is pushing against the protector ever so slightly. The sides are fine as far as I'm concerned. Just afraid that this is a "plague" that will eventually detatch the screen protector.
Other than that, it's a great screen protector and miles better than the ones I used to try on my s7 edge.
Click to expand...
Click to collapse
Hy Friends,
Here is The List !!! of compatibles cases with Whitestone Dome Glass.
https://forum.xda-developers.com/ga...s/case-compatibility-whitestone-dome-t3770259
Maybe help some of you!
Bye
Hey guys,
I am looking for the best display protection film for my S10+.
I don't think it should cover the selfie cameras because of quality loss. Also it should be compatible with a case.
There are always so many of them and it takes hours to compare the reviews on amazon to find the best one.
If you know any good cases I would be very thankful for sharing. I need a thin and simple one.
Greez, skrippi
skrippi said:
Hey guys,
I am looking for the best display protection film for my S10+.
I don't think it should cover the selfie cameras because of quality loss. Also it should be compatible with a case.
There are always so many of them and it takes hours to compare the reviews on amazon to find the best one.
If you know any good cases I would be very thankful for sharing. I need a thin and simple one.
Greez, skrippi
Click to expand...
Click to collapse
Screenprotector: InvisibleShield Ultra HD Dry
Case: Pitaka Magcase
For a case I have been using the unicorn beetle $20-$25 on amazon. Ive been using these cases for my last few phones and love them, very durable.
And for screen protecter I'm using the one that came with the phone but i just got in a tempered glass one i will be installing soon. Ill let you know how it works out.
thearmeddiyer said:
For a case I have been using the unicorn beetle $20-$25 on amazon. Ive been using these cases for my last few phones and love them, very durable.
And for screen protecter I'm using the one that came with the phone but i just got in a tempered glass one i will be installing soon. Ill let you know how it works out.
Click to expand...
Click to collapse
I don't know in what universe your case is slim and simple Look to the attachment; that is whats simple and slim. Yours is more like surviving a worlwar
The problem with tempered glass covers for rounded phone displays is always that the glass doesn't fit 100% to the screen so they put 2 lines of glue on it instead of using adhesion & cohesion like the films do.
Don't get me wrong, I like glass more than films but there are no good glasses for phones with rounded edges.
But thank you very much for your help
For screen protecter i use Alien Surface™
Anyone have any feedback on the R-Just or Gundam cases?
https://www.ebay.com/itm/R-JUST-Gun...hash=item1ef52bc018:m:mUSJdrXQrxJGTAhdPszWIQQ
With regards to display protection I would strongly recommend these I had the stock screen protector till it got too scratched then I got this one looks just as good no bubbles don't even notice it on there most of the time. The installation is a bit complicated but well worth the extra effort.
LK [3 Pack] Screen Protector for Samsung Galaxy S10 Plus, [In-Display Fingerprint Support][Case Friendly] [Bubble Free] HD Clear Flexible TPU Film with Lifetime Replacement Warranty https://www.amazon.co.uk/dp/B07PPLG1NW/ref=cm_sw_r_cp_apa_i_QXXnDb4N5X0RH
Ringke onyx our fusin x, our speck candyshell.
Screen protector, zagg invisible shield fusionguard our Ringke dual layer
It would be great to know what Samsung puts on it. The OEM screen protector works well. The reviews on Amazon for every one of the protectors are awful. The IQ Shield has the best reviews of the bunch, but I am hesitant based on the negative ones.
I figure I'll use the OEM one until it is too scratched and then live dangerously with it naked.
Regarding thin cases - I've liked the Spigen Thin Fit - but it breaks easily. The Spigen Rugged Armor is a bit thicker but much more durable. For the s10, I am using a UAG - but it feels more like a tank - which strangely enough I am liking. Not too bulky and it gives a good grip.
Try Whitestone Dome Glass.. I heard its good.
I'm using my S10+ without any case and screen protector just like my old iphone x and s8..
DO you use them on the original screen protector?
Hello
Im going to buy a S10+ soon but I need to get the screen protector and case before hand...
The screen protector is obvious: Whitestone Dome Glass
The case not so much...I wanted the Spigen Thin Armor but it doesnt seem to be compatible with the Whitestone Dome Glass
I used in the past: https://www.amazon.com/gp/product/B00OSS12Z2 and it was great and worked for me.
Suggestions?
Have you looked at Armadillo Tek cases? I have one for my S10 and it works with glass screen protectors. Otterbox commuter I think it is works too as I have it on my S10+ with a hybrid glass screen protector. Finally Pelican brand cases are also glass screen protector friendly as I got one for my S10+ as well.
Tech 21 Pure Clear....10 ft drop protection and ultra slim.... I've dropped my phone many times now on various hard surfaces and no cracks or scratches....and I also have a 5 and 2 year old.....and those kids have also dropped tested my phone many times as well.....
Sent from my SM-G975U1 using Tapatalk