Database Users

Best screen protector?

I really like the protection that invisible shield provides but I hate the feeling of it, kind of like the skin of an apple. On the other hand, I like the feel of the anti-glare protection but I don't like that it is prone to scratches and scuffs. What screen protectors are there that you think are great?

I've had my EVO since launch without a screen protector and I don't have any scratches. All natural is the best.

Since you're asking for opinions, I'll give mine. I've had Ghost Armour on mine for the last couple of months and really like it. If my hands are moist (sweat, water, whatever), there is increased resistance, which feels weird. I suspect, however, that would be the case with most protectors out there. And who makes a habit of handling their phone with wet hands anyway? I will also note that it took at least two weeks for it to completely dry and not look kinda foggy in places. Now however, it looks great.

The one that comes with otterbox product works great. No bubbles on installation and feels smooooth, unlike invisibleshild.

Get a seideo for the front.. It's rated for the most Glassy feel out of all of them

i got one that bestbuy sells been great no troubles

+1 for ghost armor

I got the shield by zagg. My fiancée got one for her captivate and had some fart knocker at best buy put it on and its feels really rubbery and looks hazy. i got one and put it on myself it took me awhile cause of course i had to have it perfect and after it dried it feels great. you can barely notice it.

None, have had mine since launch and don't have a single scratch. And I don't exactly baby the phone either.
Sent from my HTC Evo 4g

I got the zagg one from best buy. awesome screen protector . I actually like the feel better than without it
Sent from my PC36100 using XDA App

bender1077 said:
I've had my EVO since launch without a screen protector and I don't have any scratches. All natural is the best.
Click to expand...
Click to collapse
All natural is best, I just go to the beach way too much...that sand will wreak havoc on that glass

Steinheil AF. I like the feel of it and it really does reduce glare. My evo spends a good bit of time in a car mount where any reduction in glare is helpful.

Martin fields screen protector. Works pretty well for me. If its dirty you can wash it under the tap (seriously) and it will stick back again. Quite thick but has got a nice feel. Installation is do easy that monkey could do it. If you fail un peal it and stick it back again and again and again. (washed mine about 10 times and it still sticks like brand new). They don't use glue on it...
Sent from my HTC Desire using XDA App

Steinheil AF.
This one seems great but I'm alsao wondering about how it lowers the display quality because my friend has an anti-glare protector and it is noticeable that the quality is not as good as the invisible shield.
Also, the feel of the ghost armor looks similar to the invisible shield

chaoszepp said:
Steinheil AF.
This one seems great but I'm alsao wondering about how it lowers the display quality because my friend has an anti-glare protector and it is noticeable that the quality is not as good as the invisible shield.
Also, the feel of the ghost armor looks similar to the invisible shield
Click to expand...
Click to collapse
Anti-glare will do that.
www.MeanCanary.com

I went straight from the Sprint store to the ghost armor kiosk. It's barely visible, def recommend it.

MattSkeet said:
Martin fields screen protector. Works pretty well for me. If its dirty you can wash it under the tap (seriously) and it will stick back again. Quite thick but has got a nice feel. Installation is do easy that monkey could do it. If you fail un peal it and stick it back again and again and again. (washed mine about 10 times and it still sticks like brand new). They don't use glue on it...
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I've tried all of them; I recommend that you get Clarivue.
Best:
Martin Fields (Best by far, no comparison, way too expensive at $27 shipped per screen protector)
Good:
Steinheil
Clarivue (Best value)
Garbage: Don't bother with these
Invisibleshield
Ghostarmor
DCMUGEN

Stealth Guards

tonyz2897 said:
Steinheil AF. I like the feel of it and it really does reduce glare. My evo spends a good bit of time in a car mount where any reduction in glare is helpful.
Click to expand...
Click to collapse
I do prefer anti-glare, anti-fingerprints & less sweat resistance so that sounds like what I'm looking for, it still looks good on the EVO (any application issues, how long has it been on)?
Did you get it from:
http://cretouch.com/steinheil-anti-fingerprint-protection-film-p-732.html (2 for $12)
Sprint sells Custom Screen Protectors shields (Pack includes 2 regular and 1 anti-glare screen protectors) curious if anyone tried that anti-glare?

I just went from a zagg (very rubbery until a lot of use) to the one that came with my otterbox commuter. The one included is immensely more glassy with the downside of less anti glare. Either way much easier to apply then the zagg.
Sent from my PC36100 using XDA App

Looking for a High quality Case........

Hey guys whats going on, Well Looking for a new case for my galaxy s5.
What do you guys recommend?????
Right now I have a OtterBox Defender case, it is a lil Big and already Broke on me, and the Silicone also has ripped.
Trying to see what everyone is using and what has the best protection. Im a construction worker so I like sumthing really durable. Thanks guys

UAG.

i also have the otterbox but i think it's horrible.. makes the phone twice as thick and much bigger.
now i ordered the ringke slim case, i also had a ringke on my nexus 4 and that one was fantastic.

Might want to check out thewirecutter's guide (no link because I'm new )
thewirecutter.com/reviews/best-samsung-galaxy-s5-cases/

Spigen
Slim Armor

Spigen

Yeah I was looking at the spigen tough armor. Looks good. But I also want something to protect the Glass of the phone.

Why would you 50$ for a phone case? On chinese webshops you can get cases like those for around 3-7$. They may not be of the same quality but in combination with a tempered glass protector you will get protection of around the same level!

Anyone find a good screen protector film or glass?

Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case

flimflam06 said:
Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case
Click to expand...
Click to collapse
I try using the screen protector that came with the ghostek case I bought install it cover the entire front area of phone plus edges let set for about an hour try to put case on but everytime I did it would lift off the sides of the screen protector so I just took off the screen protector till I find that works. Also try the supershieldz ones same thing.

This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6

Omega Ra said:
This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6
Click to expand...
Click to collapse
I was thinking about that one but im not sure about the wet install. I'm good at putting screen protectors on but I've never did a wet install before...i May have to check it out

If you have some time and patience go for the Invisible Shield hd dry full body coverage. I originally ordered a Naked skin from slickwraps but its been processing since the 18th. So when my N7 arrived today I went on the search around town and ended up in a Verizon store. They kindly put it on for me, took two tries lol. Mid-install the Verizon guy just rips it and balls it up and went to grab another. When I got home I went through the packaging and noticed he skimmed me on the install. and didn't install the back.. I tell you what that was the worst torture in my life but hey pics below! Came out beautiful. +extra dbrand lens laying around conveniently . :good: winning

I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.

Phredeee said:
I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.
Click to expand...
Click to collapse
I ended up buying the skinomi matte screen protector which stuck on the edges perfect. Went without a case for a week and then put the spigen neo hybrid on which is my favorite case of all time and it peeled the corners still. I warmed the screen protector and was able to reform the corners a bit and it helped but i still want a problem free combination

This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17

duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Without clicking the link I'm gonna guess that's the unicorn beetle case. I have that myself and love it. I use the holster while at work

Great case. It works well with a glass screen protector.

I have an armorsuit on this phone, as well as several tablets and phones prior. Was originally skeptical of the curved edge, but it is working great so far. In the past 6 years armorsuits and common sense have kept me from having any cracked screens. And when I upgrade and sell the old phones, removing the armorsuit has always left a perfect as-new screen (but the housings usually have suffered damage from drops, etc.).

Skinomi

duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Is your tempered glass screen protector any good? How is the clarity? Sensitivity?

The clarity and sensitivity is great. I have one on my phone and my fiances phone. This is the third one we bought and its pretty close to the flat ones. Just line it up because the cut outs are exact. No room for error.

[Question] What is a good brand of tempered glass that works and effective?

So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!

Not the Whitestone then? I was almost about to pull the trigger on getting one for the S9+ but I'm hesitant now.

I've been using Whitestone for myself and my kids, although it has it's fragilities (cold, an snow can alter it) its the best i've tried. I've already ordered mine for the S9+... If i were you get a couple... just in case. As once you've tested it, you won't go back on the side glued ones. You just need to glue it well, and don't be in a hurry.
I've never had issues with touch sensitivity or peeling off (that's even nuts as it's literally glued to the screen, if you break the dome and need to peel it off you should be careful as it's glued it shatters and pieces can jump).

There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.

I have tried almost 5 brands but still did not get satisfactory result.

Just pre ordered the white stone. It was the best on the note 8.

Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
I have used Zagg's Invisible HD shields on all my smartphones. I found them to be durable and compatible with many cases. Including cases for the S7 edge.Installing them is a little complex and you need to get it right the first time in order to avoid bubbles and the edges from lifting. I had to return the one that I installed on my wife's S7 edge once because a corner kept lifting and getting dust under it. All I had to do was return the old one and they send me a new one. Once I installed the replacement correctly, it has stayed on her phone for over a year without any issues. I'm waiting for it to be available in Amazon as they're usually discounted. The Zagg website indicates that they're sold out of their Invisible HD shield for the S9+

tamanaco said:
Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
Click to expand...
Click to collapse
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.

Peanuttree said:
There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.
Click to expand...
Click to collapse
Will be interested to hear how this full adhesive version stacks up against the LOCA types.
Sent from my SM-G935F using Tapatalk

n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
Thanks for your reply... The complains put "some doubt" in my mind about the protector, I had not concluded that there was something inherently wrong with the OTAO. I posted here because I wanted to hear comments from other folks before I made my decision.
I didn't know that OTAO also made a protector that fully covers the screen, but after you mentioned it... I searched further and also found the OTAO Full Screen Coverage - Double Strong 3D in Amazon. At the same $12 price as the Case Friendly. At this price point, I might get one of each and test them with the case I'm going to use. I'm looking for a slim TPU cases from Spigen, EasyAcc, ESR and Caseologic. Currently, I use a Ringke Slim case with my S7 edge, but given the larger screen size of the S9+; I'd like a more protective setup. What case are you using on your S8 with the OTAO case friendly protector?... Thanks again.

xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk

optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Click to expand...
Click to collapse
https://www.zagg.com/us/en_us/invis...protector/glass-curve-elite-samsung-galaxy-s9

optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk
Click to expand...
Click to collapse
How's the adhesive on the OTAO full adhesive for the s8+ that u got?

xterminater07 said:
How's the adhesive on the OTAO full adhesive for the s8+ that u got?
Click to expand...
Click to collapse
I'm using this one:
EyeO2 Screen Protector for Samsung Galaxy S8 Plus 9H Full Adhesive 3D Curved Tempered Glass Guard High Sensitivity HD Full Cover Edge Protector S8+ Protective Film Replacement Accessories Black 2 Pack https://www.amazon.com/dp/B074QN6ZB5/ref=cm_sw_r_cp_apa_jPHNAbDN9V2VR
And it's good.
Sent from my SM-N910C using Tapatalk

Well I've gambled on the zagg + defender combo, I hope they play nice.....
Will report back......

i've just ordered this can anyone recommend a decent case please.
https://www.amazon.co.uk/Protector-...=merchant-items&ie=UTF8&qid=1520177568&sr=1-3

I just ordered the Zagg. Saved £4 using promo code zagg10 at checkout. £36 felt easier to swallow then £40!
Sent from my SM-G935F using Tapatalk

n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.

Geekser said:
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.
Click to expand...
Click to collapse
What version of the OTAO are you using on your Note 8 [Case Friendly] or [Full Screen Coverage]? Are you using the "Updated" version that I believe has "full-adhesive"? Are you also using a case and if so... which one?

xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
I'll be working on a buyers guide today and tomorrow it will be on my channel.. In the mean time I posted a thread about a 10 dollar dome glass copy from the supplying factory and their are a few full adhesive glass protectors I'm tested.. All the others are the same generic ones just like the S8/N8

Cheap Aliexpress Loca Screen Protectors

I ordered a $2.15 LOCA tempered glass screen protector on Aliexpress. Purchased 08/28 and received it today 09/17. I live in San Francisco. Overall the quality of the screen is pretty much the same as the Whitestone. This one doesn't come with the plastic alignment case that the Whitestone comes with, but you get a UV light and single bottle of glue. I used the same procedure as Whitestone but just without the guide. Also you don't get any tapes to protect the USB ports, etc. I just cut some packing tape and covered those up. I did ok, there is a small air bubble at the bottom. I hope it slowly cures over time. My experience with Whitestone is that you don't want to push and squeeze too hard. You can barely notice it when screen is on, but I'm kind of OCD so I ordered another and may swap it.
So if you have experience and can wait (Note 10/10+ comes with a screen protector), save some money. BTW, finger print works just fine.
Aliexpress Link

is that an Spigen tough armor case?
cheers

Same experience. Nothing fancy, but it gets the job done. Just tape over the speakers. There are some on ebay for a similar price if you don't like using Ali for some reason.
Whitestone and AMFILM are good if you need to be spoon fed.

*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.

Mr. Orange 645 said:
*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.
Click to expand...
Click to collapse
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk

gordec said:
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.

Mr. Orange 645 said:
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.
Click to expand...
Click to collapse
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk

gordec said:
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.

Thanks. Bought one to try.
Sent from my SM-N975U using Tapatalk

Mr. Orange 645 said:
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.
Click to expand...
Click to collapse
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.

gordec said:
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.
Click to expand...
Click to collapse
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.

Mr. Orange 645 said:
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.
Click to expand...
Click to collapse
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.

gordec said:
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.
Click to expand...
Click to collapse
I installed Whitestone on my N10+, but bought a pack of Ringke as a back up. Crack the Whitestone, I can install the Ringke while waiting on a replacement.
But, I think what I'll do is next paycheck, I'm going to order the AmFilm LOCA screen protector and run a little comparison.
I've used Whitestone for a month now and am pleased, but I do think it made the FP sensor less accurate But I'll remove it and install the Ringke and see how I like it, especially with the fingerprint sensor.
I'll use that for a couple weeks then install the AmFilm tempered glass one and compare it to the others.
It means a waste of $40, but in the name of inaccurate anecdotal science, why not? And if I decide I prefer Whitestone after all, it's just a $10 replacement under warranty to go back to it. I'll post my results in a thread here, maybe with some pictures.
Sorry, I know that had nothing to do with your lifting edges. Just thinking out loud. And by out loud, I mean in silence and just typing it.

The lifting edges of ringke, when I installed on my s10+, I found it best to work them down initially then just wait a while before trying again. I waited around 30 mins to 1hr after fitting it and found they stuck down easily.
I struggled with the 1st protector so discarded it but using the waiting method, the 2nd protector sides stayed down.

If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.

Just installed one myself that came from aliexpress. It turned out fine but was a bit disappointed that the glass is curvy on the edges like an s10 rather than being "boxy" so the edges are a bit exposed. Can't be bothered though to buy another one and go through the installation again as it took quite some time to get it done. Fingerprint is working fine, just press the fingerprint area while curing for the first time.

ajsmsg78 said:
If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.
Click to expand...
Click to collapse
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?

fusiondynamics said:
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?
Click to expand...
Click to collapse
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.

what is the price this protector?
protector price,?

ajsmsg78 said:
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.
Click to expand...
Click to collapse
What do you use, just water or lightly soapy solution?