Database Users

HELP!!!!!Best tempered glass protection to use with zerolemon s7 edge case?

hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance

twodollars2 said:
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
Click to expand...
Click to collapse
As far as I'm aware, the consensus is that tempered glass protectors with the S7 Edge and the majority of cases simply don't work.
FYI, I've tried quite a few different protectors and cases here in the UK with next to no luck.
Just thought I'd inform you of my experience

So here's what I'm using.
https://www.amazon.com/gp/product/B01MZ02Y2I/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
It was easy to install and hardly noticeable.
The screen looses sensitivity and makes texting slightly difficult at times but still tolerable after you get used to it.
I also have an Otterbox Defender. I peeled the annoying screen protector off of that and installed this tempered glass protector then installed the case.
Flawless fit! Don't know anything about Zerolemon cases though.
Nevertheless, I'm very satisified with my tempered glass protector.
Also... perhaps your inquiry would have been better posted here: https://forum.xda-developers.com/s7-edge/accessories/curved-tempered-glass-screen-protector-t3320688

I used the original zagg glass and trimmed a bit off of the zerolemon case at the bottom chin.
It fits fine without modification with the new zagg glass.

I went to the extreme on this case because I been through more screen protectors than I should have. What I did was trim down the inner lip of the case that touches the screen. I used a slightly sharp exacto knife and slightly trimmed away all the hard edges surrounding the phone a little at a time. Doesn't take much trimming to get it to work. Mine looks not all that perfect but now my screen protector is good no problems

I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.

How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
mine broke once & they even sent me a free replacement too!

grem323 said:
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
Click to expand...
Click to collapse
Here's a review of the GPEL one. It's not a positive one.
"Review of the GPEL Tempered Glass Screen Protector for the Samsung Galaxy S7 Edge"
https://youtu.be/FZxTsYOQdak

i've had this tempered glass for about 2.5 months now. I use it with the samsung leather case & the ringke slim case.
as long as you dont use a case that extends/overlaps over the edges this works beautifully!!
i wouldnt mind buying this again! Highly recommended!
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
the glass reviewed in the above video is gen 1 which i admit did have issues.
they had fixed most gripes with gen 2 since!

Zagg Invisible Shield glass curve for S7 Edge rocks!
mutiny said:
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
Click to expand...
Click to collapse
I ran into the same thing, but I found the Zagg Invisible Shield glass curve for S7 Edge. It is expensive, but it is a bit smaller than the others so most cases don't affect it and work fine. I'm currently using it with the SUPCASE Unicorn Beetle Hybrid case.
So far this is the only curved glass screen protector that works with anything more than a minimal case.
Here's the link to the screen protector:
https://www.zagg.com/us/en_us/invis...xy-s7-edge/glass-curve-samsung-galaxy-s7-edge
and the case:
https://www.amazon.com/SUPCASE-Unic...s=Galaxy+S7+Edge+Case,+SUPCASE+Unicorn+Beetle

Can anyone recommend screen protectors which can be bought in the UK?

I have purchased an S8+ recently and ordered some cheap cases and screen protectors off ebay. The problem is that they pick up fingerprints and look weird around edges where the adhesive is. Can anyone recommend and good screen protectors that can be bought in the UK? I'd prefer them to be case friendly as well. Thanks.

I use these with my Spigen thin case.
They have wings so tuck under the case stopping edge lift.
Samsung Galaxy S8 Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Th https://www.amazon.co.uk/dp/B071CDJBJ1/ref=cm_sw_r_cp_apap_Jd44jGqXHOFUC
Not perfect, but best I have tried yet.

mgbosshogg said:
I use these with my Spigen thin case.
They have wings so tuck under the case stopping edge lift.
Samsung Galaxy S8 Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Th https://www.amazon.co.uk/dp/B071CDJBJ1/ref=cm_sw_r_cp_apap_Jd44jGqXHOFUC
Not perfect, but best I have tried yet.
Click to expand...
Click to collapse
Yes, I've read about these but forgot about them! Thanks for this, will definitely get them.

The tech 21 screen protectors are really really nice. I have 1 on my S8 and it's fantastic even with fingerprints. It's very case friendly I have yet to have any issues with it yet.

I use Samsungs OEM screen protector.

I bought mine in Switzerland. It is a "Panzerglass" one. The phone already fell hard on the ground and the screen protector didn't even scratched, it also doesn't catch fingerprints easily.

I've tried quite a bit of screen protectors, invisible defender, white stone, spigen etc and I ended up returning them all. It's going to be trial and error for you; it's highly subjective and what you will like compared to others.

There is an XDA forum dedicated to the S8+ (rather than the S8), and there's an Accessories sub-forum within it where there are a number of threads dealing with screen protectors for the S8+
https://forum.xda-developers.com/galaxy-s8+/accessories

Case compatibility with the Whitestone Dome Glass master list

I found this master list of cases that work and do not work with the whitestone dome glass on Reddit. I thought it would be helpful for those here as well! There seems to be a submission form for other cases that people have tested out and whether or not they fit, so it is continually updated.
Hope this helps others as it really stinks to spend so much on that screen protector only to have a case screw it up because it doesn't fit
mod edit - affiliate links list removed

Thanks,
I submitted a couple models that work using the link.

Spigen skin air works perfect with my dome protector ?

Nice! Looks like they were already added.

I pre-ordered the Moment case... it's a gamble.

Did the Moment wind up fitting? I was thinking of getting that with the Dome Glass screen protector as well. Haven't seen it on any of these lists.

I have the Spigen Neo hybrid. I noticed that the corners of the screen have a little gap between the screenprotector and the case. On the sides , the gap isnt noticable.

Is the Samsung Alcantara case definitely compatible? Anyone have this case with the whitestone dome?

redeus said:
Is the Samsung Alcantara case definitely compatible? Anyone have this case with the whitestone dome?
Click to expand...
Click to collapse
Yes I have that case for my S9+ and whitestone dome glass.
Sent from my Samsung SM-G965U1 using XDA Labs

Warning about the Moment case. The bottom 2 lips of the case touch the glass (the sides and top are fine). I don't know if I want to keep it on long enough to see if the bottom of the glass lifts....
Edit: The Moment case is not compatible with the Whitestone.

Your list says the OtterBox Pursuit series does not fit, this is false. I would say it is an exact fit with only a few millimeters of "wiggle room" but it does fit with no glass touching or conflicts with the case.

Anyone tried the Youmaker? https://www.amazon.com/gp/product/B07BMSMFC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Looks similar to the Unicorn Beetle and was wondering if it worked. I just ordered that and The Unicorn Beetle Hybrid: https://www.amazon.com/gp/product/B079BSJH8M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Figured Ive never really had a problem except when I had my S7 Edge that the screen shattered twice. Hoping cause its not as curved that itll be less likely to break as long as I have a decent case on it. But still want a screen protector.

Anyone have Vena vArmor case?
https://www.ebay.com/itm/Vena-vArmo...er-Shockproof-Stand-Case-/312153941342?_ul=HR
Poslano sa mog SM-T555 koristeći Tapatalk

https://forum.xda-developers.com/ga...innest-minimalist-case-kevlar-aramid-t3780879
pitaka case also works well

xbmoyx said:
Your list says the OtterBox Pursuit series does not fit, this is false. I would say it is an exact fit with only a few millimeters of "wiggle room" but it does fit with no glass touching or conflicts with the case.
Click to expand...
Click to collapse
It fits with pursuit? Mind sharing pics with it?

Whitestone Dome glass fits Galaxy S9+ perfectly with Incipio Dual Pro case ?
Sent from my Galaxy S9+ using XDA Labs

infamousvincci said:
It fits with pursuit? Mind sharing pics with it?
Click to expand...
Click to collapse
No problem, here ya go. Been installed for almost a month now with no issues, definitely the best combo for overall protection IMO.

xbmoyx said:
No problem, here ya go. Been installed for almost a month now with no issues, definitely the best combo for overall protection IMO.
Click to expand...
Click to collapse
I just went with this combo as well. Whitestone said that they haven't had any problems so far with this case so I got it. Now that both are in my hands, it seems initially that it might cause problems... However I don't think the case bezel actually sits fully flush with the glass. There's a soft, flexible barrier used to keep dust out, and I think this is what keeps the comparability. I can try posting a picture if needed but from what I'm reading around I haven't seen anybody claiming incompatibility with the Pursuit so far.
Of course, I just installed my Dome today so I'll let you guys know how the pursuit goes for me.
EDIT: Fits perfectly fine. No part of the case is really touching the glass. Just be careful when putting the case on is all.

Radboy16 said:
I just went with this combo as well. Whitestone said that they haven't had any problems so far with this case so I got it. Now that both are in my hands, it seems initially that it might cause problems... However I don't think the case bezel actually sits fully flush with the glass. There's a soft, flexible barrier used to keep dust out, and I think this is what keeps the comparability. I can try posting a picture if needed but from what I'm reading around I haven't seen anybody claiming incompatibility with the Pursuit so far.
Of course, I just installed my Dome today so I'll let you guys know how the pursuit goes for me.
Click to expand...
Click to collapse
Yes it seems like the case come close to the screen, but there is a gap with a barrier which is raised off the glass letting the WhiteStone dome fit.

I have Spigen Liquid Armor, Slim Armor, Ultra Hybrid Clear, and Air Skin.
I'm very sure Air Skin can fit, and also Slim Armor cannot fit.
I need to verify Liquid Armor and Ultra Hybrid can fit. Anyone also using the same type?
Master list indicate Liquid Armor cannot fit, and Ultra Hybrid can fit. But I need a review from the users direct if there's any.

Spigen case with offical 1+ screen protector

can anyone confirm this pls ? is spigen case is compatible with official one plus 6t screen protector ? i purchased my phone yesterday and its arriving today ! so i wanna confirm before buying the case

Not running the that exact combo, but this time OP did make their 3D screen protector more case friendly. I'm running the SUPCase and the OP screen protector no issues. I had picked up the OP bumper case when I ordered my screen protectors just in case, but I quickly switched back to the SUPCase. No issues. Wouldn't imagine Spigen is that much different.
This is the one I'm using:OnePlus 6T Case, SUPCASE [Unicorn Beetle Style Series]

If your talking about Spigen Liquid Air then Yes I am rocking that case and stock screen protector.
It works great and the case is nice

Rocking the official tgsp and the spigen case. Works great, feel super premium.

Whitestone Dome Glass screen protector with what slim case?

Hello
Im going to buy a S10+ soon but I need to get the screen protector and case before hand...
The screen protector is obvious: Whitestone Dome Glass
The case not so much...I wanted the Spigen Thin Armor but it doesnt seem to be compatible with the Whitestone Dome Glass
I used in the past: https://www.amazon.com/gp/product/B00OSS12Z2 and it was great and worked for me.
Suggestions?

Have you looked at Armadillo Tek cases? I have one for my S10 and it works with glass screen protectors. Otterbox commuter I think it is works too as I have it on my S10+ with a hybrid glass screen protector. Finally Pelican brand cases are also glass screen protector friendly as I got one for my S10+ as well.

Tech 21 Pure Clear....10 ft drop protection and ultra slim.... I've dropped my phone many times now on various hard surfaces and no cracks or scratches....and I also have a 5 and 2 year old.....and those kids have also dropped tested my phone many times as well.....
Sent from my SM-G975U1 using Tapatalk