Hello
Im going to buy a S10+ soon but I need to get the screen protector and case before hand...
The screen protector is obvious: Whitestone Dome Glass
The case not so much...I wanted the Spigen Thin Armor but it doesnt seem to be compatible with the Whitestone Dome Glass
I used in the past: https://www.amazon.com/gp/product/B00OSS12Z2 and it was great and worked for me.
Suggestions?
Have you looked at Armadillo Tek cases? I have one for my S10 and it works with glass screen protectors. Otterbox commuter I think it is works too as I have it on my S10+ with a hybrid glass screen protector. Finally Pelican brand cases are also glass screen protector friendly as I got one for my S10+ as well.
Tech 21 Pure Clear....10 ft drop protection and ultra slim.... I've dropped my phone many times now on various hard surfaces and no cracks or scratches....and I also have a 5 and 2 year old.....and those kids have also dropped tested my phone many times as well.....
Sent from my SM-G975U1 using Tapatalk
Related
I recently purchased some Spigen Glas.TR Slim screenm protectors for my Moto Z Force (https://www.amazon.com/Spigen-Force...485543990&sr=8-3&keywords=spigen+moto+z+force) but despite being advertised as "9H Hardness", there are scratches all over it from the metal on my jeans. Are there any other full coverage tempered glass screen protectors that don't have this issue?
I kept having issues with various tempered glass screen protectors....Instead, I went with the "flexible screen protector" that is sold directly through VZW as a VZW product. These have been great and even less expensive than most tempered glass options.
Hope this helps. Regards.
i also got the VZW flexible glass, works great
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
twodollars2 said:
hi guys,
was wondering if anyone has found a good tempered glass to use with the s7 edge zerolemon case. all the one's i have tried keep peeling up once i place the phone back into the case. Please help if anyone has successfully been able to use tempered glass with this case. Thanks in anvance
Click to expand...
Click to collapse
As far as I'm aware, the consensus is that tempered glass protectors with the S7 Edge and the majority of cases simply don't work.
FYI, I've tried quite a few different protectors and cases here in the UK with next to no luck.
Just thought I'd inform you of my experience
So here's what I'm using.
https://www.amazon.com/gp/product/B01MZ02Y2I/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
It was easy to install and hardly noticeable.
The screen looses sensitivity and makes texting slightly difficult at times but still tolerable after you get used to it.
I also have an Otterbox Defender. I peeled the annoying screen protector off of that and installed this tempered glass protector then installed the case.
Flawless fit! Don't know anything about Zerolemon cases though.
Nevertheless, I'm very satisified with my tempered glass protector.
Also... perhaps your inquiry would have been better posted here: https://forum.xda-developers.com/s7-edge/accessories/curved-tempered-glass-screen-protector-t3320688
I used the original zagg glass and trimmed a bit off of the zerolemon case at the bottom chin.
It fits fine without modification with the new zagg glass.
I went to the extreme on this case because I been through more screen protectors than I should have. What I did was trim down the inner lip of the case that touches the screen. I used a slightly sharp exacto knife and slightly trimmed away all the hard edges surrounding the phone a little at a time. Doesn't take much trimming to get it to work. Mine looks not all that perfect but now my screen protector is good no problems
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
mine broke once & they even sent me a free replacement too!
grem323 said:
How is it that no one has ever heard of GPEL tempered glass
(GEN 2) for the s7 edge. its amazing!!!
Click to expand...
Click to collapse
Here's a review of the GPEL one. It's not a positive one.
"Review of the GPEL Tempered Glass Screen Protector for the Samsung Galaxy S7 Edge"
https://youtu.be/FZxTsYOQdak
i've had this tempered glass for about 2.5 months now. I use it with the samsung leather case & the ringke slim case.
as long as you dont use a case that extends/overlaps over the edges this works beautifully!!
i wouldnt mind buying this again! Highly recommended!
---------- Post added at 08:44 AM ---------- Previous post was at 08:42 AM ----------
the glass reviewed in the above video is gen 1 which i admit did have issues.
they had fixed most gripes with gen 2 since!
Zagg Invisible Shield glass curve for S7 Edge rocks!
mutiny said:
I'm on the same boat and unless there's a screen protector that only covers the screen and doesn't go up to the four corners, I don't think there are any screen protectors out there right now that won't get pushed in by a case.
Click to expand...
Click to collapse
I ran into the same thing, but I found the Zagg Invisible Shield glass curve for S7 Edge. It is expensive, but it is a bit smaller than the others so most cases don't affect it and work fine. I'm currently using it with the SUPCASE Unicorn Beetle Hybrid case.
So far this is the only curved glass screen protector that works with anything more than a minimal case.
Here's the link to the screen protector:
https://www.zagg.com/us/en_us/invis...xy-s7-edge/glass-curve-samsung-galaxy-s7-edge
and the case:
https://www.amazon.com/SUPCASE-Unic...s=Galaxy+S7+Edge+Case,+SUPCASE+Unicorn+Beetle
I have purchased an S8+ recently and ordered some cheap cases and screen protectors off ebay. The problem is that they pick up fingerprints and look weird around edges where the adhesive is. Can anyone recommend and good screen protectors that can be bought in the UK? I'd prefer them to be case friendly as well. Thanks.
I use these with my Spigen thin case.
They have wings so tuck under the case stopping edge lift.
Samsung Galaxy S8 Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Th https://www.amazon.co.uk/dp/B071CDJBJ1/ref=cm_sw_r_cp_apap_Jd44jGqXHOFUC
Not perfect, but best I have tried yet.
mgbosshogg said:
I use these with my Spigen thin case.
They have wings so tuck under the case stopping edge lift.
Samsung Galaxy S8 Screen Protector, Invisible Defender [Full Coverage][2-Pack] Edge to Edge Curved Side Coverage Guaranteed [Case Compatible] Super Th https://www.amazon.co.uk/dp/B071CDJBJ1/ref=cm_sw_r_cp_apap_Jd44jGqXHOFUC
Not perfect, but best I have tried yet.
Click to expand...
Click to collapse
Yes, I've read about these but forgot about them! Thanks for this, will definitely get them.
The tech 21 screen protectors are really really nice. I have 1 on my S8 and it's fantastic even with fingerprints. It's very case friendly I have yet to have any issues with it yet.
I use Samsungs OEM screen protector.
I bought mine in Switzerland. It is a "Panzerglass" one. The phone already fell hard on the ground and the screen protector didn't even scratched, it also doesn't catch fingerprints easily.
I've tried quite a bit of screen protectors, invisible defender, white stone, spigen etc and I ended up returning them all. It's going to be trial and error for you; it's highly subjective and what you will like compared to others.
There is an XDA forum dedicated to the S8+ (rather than the S8), and there's an Accessories sub-forum within it where there are a number of threads dealing with screen protectors for the S8+
https://forum.xda-developers.com/galaxy-s8+/accessories
Bought the Whitestone Dome protector after hearing rave reviews about it. Paired it with the Spigen slim armor in all black, which is probably the most beautiful Spigen case in years.
Unfortunately, after a few hours I notice "spider cracks" forming at the bottom edge, and this morning a couple bubbles at the top edge. Turns out the lips on the slim armor is pushing against the protector ever so slightly. The sides are fine as far as I'm concerned. Just afraid that this is a "plague" that will eventually detatch the screen protector.
Other than that, it's a great screen protector and miles better than the ones I used to try on my s7 edge.
I've ordered the spigen air skin for my s9+ I hope it fits with my phone with my dome protector on.
Get the Spigen 593CS22943 Galaxy S9 Plus Case Neo Hybrid from Amazon. Works fine with the whitestone
welshandy2322 said:
Get the Spigen 593CS22943 Galaxy S9 Plus Case Neo Hybrid from Amazon. Works fine with the whitestone
Click to expand...
Click to collapse
Thanks for the suggestion, but I don't quite like the Neo hybrid series. Prefer something with a hard back. Used an ultra hybrid for my s7 previously but it turned yellow easily. Might consider cutting a little bit of the silicon on the slim armor instead...
I also purchased this whitestone some protector and a spigen air liquid case for a S9 plus.
Didn't applied the screen protector yet.
Now I am afraid of wasted my money with this expensive screen protector...
Enviado do meu SM-G965F através do Tapatalk
I have the Whitestone Dome glass on my Note 8 with the Spigen Armored clear case and it fits just fine. I'm hoping this holds to be true for the S9+ with that same case and glass.... I'll keep you guys posted. I'm thinking it should be fine though...
trenzterra said:
Bought the Whitestone Dome protector after hearing rave reviews about it. Paired it with the Spigen slim armor in all black, which is probably the most beautiful Spigen case in years.
Unfortunately, after a few hours I notice "spider cracks" forming at the bottom edge, and this morning a couple bubbles at the top edge. Turns out the lips on the slim armor is pushing against the protector ever so slightly. The sides are fine as far as I'm concerned. Just afraid that this is a "plague" that will eventually detatch the screen protector.
Other than that, it's a great screen protector and miles better than the ones I used to try on my s7 edge.
Click to expand...
Click to collapse
Hy Friends,
Here is The List !!! of compatibles cases with Whitestone Dome Glass.
https://forum.xda-developers.com/ga...s/case-compatibility-whitestone-dome-t3770259
Maybe help some of you!
Bye
Hello.
For the last 3-4 months I've been using an Unicorn Beetle pro case and I love it.
https://www.amazon.com/SUPCASE-Designed-Full-Body-Kickstand-Protector/dp/B07TR4N14N
I tried two cheap glass protectors, but both of them peeled from the front plastic part of the case.
Do any of you use this specific case with a glass screen protector(with fingerprint usage also)?
If i get links, i would like something which ships in eastern EU (I am from Romania).
Thank you
If the case is contacting the protector this will probably make it fail no matter what brand.
The curved screen makes finding a good case and screen protector solution quit a pain.
I've been using Gorilla IQ Sheild, a wet apply urethane plastic protector. Got 3+ months on the current one at about $5 a pop. Good scratch protection and limited impact protection but probably enough with a good case.