Related
Hello,
somehow I had a problem that many apps force closed after doing something, so I tried flashing opengapps - worst idea. I started the phone and nothing worked because I always get force close on Setup Assistent.
I were on Cydras Rom (https://forum.xda-developers.com/le-pro3/development/rom-google-edition-cydras-t3514742). So now I tried overflashing it again but somehow it says successfully installed and also "cant unmount system: volume not found". The system image is now about 900mb big, the zip 1.3gb - can't be possible. It doesn't but and stuck on the first Leeco screen. Now I tried sideload: failed - invalid command..
Well, I tried getting another rom and put it on phone by MTP in TWRP.. Same problem - TARS causes boot into Recovery and CM13 by Superluminal doesn't even flash: stuck on "patching system image unconditonally".
Has someone a solution or more like is there any system image I can flash through fastboot?
Or could someone make one? PLEASE!
I think somehow the system can't be mounted...
Probably flashing stock ROM jacked your phone into locked system.
Are you able to fastboot flash/boot TWRP?
If yes, try to copy the official firmware zip by renaming it to update.zip and putting it into internal storage.
Next you have to flash stock recovery from fastboot, reboot into recovery right away and then apply update. If you succeed you should have a working back-to-stock.
You didn't mention if u have x727 or x720? And you didn't mention what possible "something" u did which jacked up your apps to FCs. Looks like a kernel level modification to me...
Have u tried the bootloader unlock checking command?
Somehow I tried this twrp backup: https://forum.xda-developers.com/le-pro3/how-to/le-pro-3-lex727-twrp-backup-eui-5-8-019s-t3504761
Now I can't mount storage, because it's encrypted... -.-
I have x720 and I don't really know what caused the FCs, the last I remember was uninstalling Android WebView.
Now I have to try to get access to storage again..
## bootloader is unlocked
dark_prince said:
Probably flashing stock ROM jacked your phone into locked system.
Are you able to fastboot flash/boot TWRP?
If yes, try to copy the official firmware zip by renaming it to update.zip and putting it into internal storage.
Next you have to flash stock recovery from fastboot, reboot into recovery right away and then apply update. If you succeed you should have a working back-to-stock.
You didn't mention if u have x727 or x720? And you didn't mention what possible "something" u did which jacked up your apps to FCs. Looks like a kernel level modification to me...
Have u tried the bootloader unlock checking command?
Click to expand...
Click to collapse
Okay, my internal storage is now lost.. but idc.
I tried getting 20s stock zip and it says "apk not found" in stock recovery..?
Grossoshop ROM is fastboot installable.
Presterin said:
Grossoshop ROM is fastboot installable.
Click to expand...
Click to collapse
Link?
idragonx said:
Link?
Click to expand...
Click to collapse
Sure, here you go: http://blog.grossoshop.net/leeco-x720-grossoshop-rom-italiano-ota/
idragonx said:
Okay, my internal storage is now lost.. but idc.
I tried getting 20s stock zip and it says "apk not found" in stock recovery..?
Click to expand...
Click to collapse
Unlocked bootloader so far so good.
Flash TWRP and try to reformat partitions.
ADB side-load your favorite ROM (make sure to verify MD5 first before side-loading)...
dark_prince said:
Unlocked bootloader so far so good.
Flash TWRP and try to reformat partitions.
ADB side-load your favorite ROM (make sure to verify MD5 first before side-loading)...
Click to expand...
Click to collapse
How to reformat? I tried wiping all & make it ext4 in TWRP.
Sideload doesn't work: * failed to read command: Invalid argument
Advanced wipe > modify or repair file system?
---------- Post added at 11:50 PM ---------- Previous post was at 11:48 PM ----------
What appears if u use the 2nd wipe option instead of advanced wipe (the option other than slide to factory reset & Advanced wipe, I forgot it's name but it reformats internal storage as well)
dark_prince said:
Advanced wipe > modify or repair file system?
---------- Post added at 11:50 PM ---------- Previous post was at 11:48 PM ----------
What appears if u use the 2nd wipe option instead of advanced wipe (the option other than slide to factory reset & Advanced wipe, I forgot it's name but it reformats internal storage as well)
Click to expand...
Click to collapse
All wipes work, but sideload still doesn't work.
I tried now downloading the grossoshop zip and there is no batch like in the screenshots, so I tried flashing system.img manually out of the zip and I get:
fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
Elaborate side load doesn't work.... Is it an error on TWRP? Or you just can't find device while doing "ADB devices"?
Is ADB correctly installed? Is ur device correctly recognized drivers-wise ? Check device manager after enabling side load while ur device is connected via USB....
Which device is it? 720 or 727?
Drivers? Check in device manager after "Swipe to enable side load"
idragonx said:
All wipes work, but sideload still doesn't work.
I tried now downloading the grossoshop zip and there is no batch like in the screenshots, so I tried flashing system.img manually out of the zip and I get:
fastboot flash system system.img
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
Click to expand...
Click to collapse
That's weird, I downloaded it couple of days ago, and it has batch file. Corrupted download?
Presterin said:
That's weird, I downloaded it couple of days ago, and it has batch file. Corrupted download?
Click to expand...
Click to collapse
I used this from the post: https://mega.nz/#!tUkUQJwZ!h3tniWVWlSiYJICadW7MuEdYLDFKfNmNcEOBQ-eL1JM
dark_prince said:
Elaborate side load doesn't work.... Is it an error on TWRP? Or you just can't find device while doing "ADB devices"?
Is ADB correctly installed? Is ur device correctly recognized drivers-wise ? Check device manager after enabling side load while ur device is connected via USB....
Which device is it? 720 or 727?
Drivers? Check in device manager after "Swipe to enable side load"
Click to expand...
Click to collapse
It's x720.
Drivers seems to work in device manager, I can use adb, but on sideload it goes to ~3% and the the error I mentioned comes with invalid argument.
Can I change somehow the maximum system.img size for device? Somehow I need to flash it with fastboot
#####
I GOT IT.
Finally - https://mega.nz/#!VEM1QIYL!HwT9hk7-GA6KZBTRMv0IQ9kleYaG-el63UF21S6P0us
It could do it using fastboot - oh god thanks. Now I try to flash my custom rom.
idragonx said:
It's x720.
Drivers seems to work in device manager, I can use adb, but on sideload it goes to ~3% and the the error I mentioned comes with invalid argument.
Can I change somehow the maximum system.img size for device? Somehow I need to flash it with fastboot.
Click to expand...
Click to collapse
mD5 verified?
Alright try this. Get latest CM13 build from teamsuperluminal website and also get the x720 patch from there too. Then in TWRP (while connected to USB) go to advanced wipe > cache + system + dalvik + data.
Open downloaded CM13 zip in 7-zip file manager, go to META-INF > Android folder and extract only the updater_script file. (Should be in that or in a subwoofer). Keep the 7-zip opened and dont close it.
Open the updater_script file in notepad++ and remove first line which starts with "assert". Save
Then drag drop it back into 7-zip( in the same folder structure.) Close 7-zip after
Enable side load in TWRP
Now side load x720 patch first
Then side load CM13 ROM file u just modified into your phone.
dark_prince said:
Enable side load in TWRP
Now side load x720 patch first
Then side load CM13 ROM file u just modified into your phone.
Click to expand...
Click to collapse
Thank you very much for your help, but finally I found the 18s from grossoshop with the BATCH - it could fastboot load the system.img partially and now it boots <3
Ah sweet. Lol
I couldn't flash CM13 until I tried 5 different methods to get Round patching system lockout...
dark_prince said:
Ah sweet. Lol
I couldn't flash CM13 until I tried 5 different methods to get Round patching system lockout...
Click to expand...
Click to collapse
Well, but I can't flash back my cydras ROM
Imho it should work now to go back to stock. Download official Chinese firmware zip file (not OTA) and rename it to update.zip
Put it in internal storage (not into any folder)
Go to fastboot and flash stock recovery.
Then boot into stock recovery and apply update.zip
Result should be profiting.
idragonx said:
Well, but I can't flash back my cydras ROM
Click to expand...
Click to collapse
If so, how? Thanks!
magicmanfk said:
If so, how? Thanks!
Click to expand...
Click to collapse
This was totally bugging me too but after a whole day of trying I've finally managed it.
1) Go to this thread here
2) Boot into fastboot and flash the boot.img and system.img as suggested in the thread
3) Also flash the original recovery using "fastboot flash recovery recovery.img"
4) Go to the official asus support site here and download the update files you need, the last two
5) Download Version V11.41.87.2 and place the file in the internal storage of your sd card, once you pull the cable out your phone the phone should detect a update file and ask if you want to install it. Click OK.
6) The phone will unpack the update and reboot and install it
7) Delete this update file and then add the latest Nougat update file (Version V20.31.49.2)
8) Do the same again and install it and there you have it... the key is that you have to install each incremental update rather than go straight to the latest.
Oh and I don't know if it makes any difference, but I decided to turn off adb debugging once I'd flashed the various boot, system and recovery images before I started to update using the Asus method.
Also I have successfully re-flashed TWRP through fastboot on Nougat.
Hope this helps.
worked for me perfectly
pjcarrmole said:
This was totally bugging me too but after a whole day of trying I've finally managed it.
1) Go to this thread here
2) Boot into fastboot and flash the boot.img and system.img as suggested in the thread
3) Also flash the original recovery using "fastboot flash recovery recovery.img"
4) Go to the official asus support site here and download the update files you need, the last two
5) Download Version V11.41.87.2 and place the file in the internal storage of your sd card, once you pull the cable out your phone the phone should detect a update file and ask if you want to install it. Click OK.
6) The phone will unpack the update and reboot and install it
7) Delete this update file and then add the latest Nougat update file (Version V20.31.49.2)
8) Do the same again and install it and there you have it... the key is that you have to install each incremental update rather than go straight to the latest.
Oh and I don't know if it makes any difference, but I decided to turn off adb debugging once I'd flashed the various boot, system and recovery images before I started to update using the Asus method.
Also I have successfully re-flashed TWRP through fastboot on Nougat.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the instructions; worked for me. Were you able to re-root? I tried to by following this guide: https://www.reddit.com/r/zenfone/comments/6gqha5/zenfone_3_ze553kl_z01hd_root/
But on step 8 of the supersu website, my phone gets stuck on "starting adb sideload feature." I had already tried installing supersu via twrp, but still no root.
Devalorize said:
Thanks for the instructions; worked for me. Were you able to re-root? I tried to by following this guide: https://www.reddit.com/r/zenfone/comments/6gqha5/zenfone_3_ze553kl_z01hd_root/
But on step 8 of the supersu website, my phone gets stuck on "starting adb sideload feature." I had already tried installing supersu via twrp, but still no root.
Click to expand...
Click to collapse
I flashed TWRP from one of the other threads on here filename twrp-3.1.0-0-Z01H-20170408.img to be precise.
I then flashed the latest version of magisk the zip found here
Then selecting core files only and magisk hide options I have root that passes the latest safetynet checks. No problem.
pjcarrmole said:
I flashed TWRP from one of the other threads on here filename twrp-3.1.0-0-Z01H-20170408.img to be precise.
I then flashed the latest version of magisk the zip found here
Then selecting core files only and magisk hide options I have root that passes the latest safetynet checks. No problem.
Click to expand...
Click to collapse
This worked for me, thanks. It's too bad Xposed doesn't support Nougat yet. Missing my Xposed modules.
Devalorize said:
This worked for me, thanks. It's too bad Xposed doesn't support Nougat yet. Missing my Xposed modules.
Click to expand...
Click to collapse
Magisk has a few modules for it but nothing like Xposed.
I'm going to do a full back up and then see how well ZenUI plays with Substratum as most of the ZenUI Themes are pretty poor and I want an all black theme. I'll let people know how it goes if anyone is interested in using substratum.
---------- Post added at 10:28 AM ---------- Previous post was at 09:32 AM ----------
pjcarrmole said:
I flashed TWRP from one of the other threads on here filename twrp-3.1.0-0-Z01H-20170408.img to be precise.
I then flashed the latest version of magisk the zip found here
Then selecting core files only and magisk hide options I have root that passes the latest safetynet checks. No problem.
Click to expand...
Click to collapse
Oh, if you're having trouble getting TWRP to stick don't reboot the system but reboot back into Recovery, by holding the Vol - & Power together and using the Volume buttons to select Recovery.
After this you can then reboot normally.
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Worked !!!
Thank you dear. Its worked for mine in p585 oreo android....
Anyone can search mcmilk 7zip in google and download program to extract boot.img.lz4 and get boot.img :good:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Latest twrp dose not worked on my device but this solution work fine
I can confirm that this method does work. I used it on my SM-P580 yesterday. I would suggest that you first backup your all of your apps, contacts, photos, etc using SmartSwitch. You will need to restore everything after the tablet tells you that it needs to be reset because it wipes everything. After the restore, you will need to enter all of your accounts and passwords again but at least all of the data will be back.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
Im not sure if this post belongs here, you link to the T580 TWRP, not the P580.
Is that one compatible with P580?
nill3bor said:
use the last TWRP for Oreo.
old version makes black screen or red stripes.
go in download-mode (power+home+vol-) and install the last TWRP over with Odin.
for Oreo use the last Odin 3.13
it tested, i had the same problem :fingers-crossed:
Click to expand...
Click to collapse
If I do this, will I be able to mount my SD Card as internal storage? 16gb just isnt enough on this tablet.
Do you have to be on oreo already for this to work I'm still on 7.0 and with my system modified I can't upgrade normally
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
This one worked for me on a P585Y. You just have to skip the steps below.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
Click to expand...
Click to collapse
It will also show on the Device Maintenance, just ignore the warning.
You can freeze some of the system apps to prevent it from showing on the notification again.
amosdinh said:
I found a solution if you don't need TWRP, only Magisk or Root. (Using sm-p580 german version P580KXU1CRJ7)
Short Version:
Install Magisk without TWRP with odin in AP section(google it)
Problem is: Once booted up it will tell you that you have to reset your device because the system recognizes that you modified something.
Solution: Just click on the reset button( Magisk will still be there afterwards).
Long Version
Flash the Oreo firmware onto your device.
Set it up (turn on USB debugging) (or dont, I believe you dont need it for download mode ?)
Unzip the AP part of the firmware you have flashed. You may need a modified version of 7-zip, I needed it, because it couldn't unzip lz4.
Google mcmilk 7 zip and download the github release (I hope I'm allowed to reference it, CREDIT goes to MILKY)
You need the boot.img.
Now install Magisk Manager apk.
Under its settings check " .img.tar" under "return of patched boot-images" (Something like that, mine is german)
Click on install in Magisk Manager apk.
Select make thing with boot img, use the boot.img you have extracted and copied onto your phone.
Magisk will create new patched boot img automatically, copy the finished one u find under your main storage in downloads to your pc.
Go into download mode and flash new boot.img with odin using the AP tab.
Now do the things I described in the Short Version
Afterwards install Magisk Manager Apk.
You need internet connection, because it will prompt you to allow installing additional stuff.
A message from some Security App will appear, that something is wrong.
And your device will get laggy and restart.
After that the lag will disapear
I like to use Bk disabler to remove bloatware/ other stuff to flash or back up your device
(Please dont remove any of the 3 phone apks, on Nougat it worked to remove two of them, but oreo will continuously give an error message <- I found out that you can uninstall two of them, but dont uninstall the storagedial-programm thats what gives the errormessage.)
Hope it will help you!
Click to expand...
Click to collapse
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Hello Gyus,
I managed to root the device with the method posted by @amosdinh (Thank you so much). Now I'm trying to configure adoptable storage. So far I didn't achieve this goal. ADB commands doesn't work and I can't install the ASPlugin.zip needed by Root Essentials to set adoptable storage by the app.
TWRP for P585 is corrupted, gives blue/red lines screen. The dev that maintains the code is absent since march. I'm out of luck on this. If anyone have a idea to get adoptable storage on this device while using Oreo, please comment.
Thanks!
---------- Post added at 11:17 AM ---------- Previous post was at 11:11 AM ----------
artaeun said:
this works great! thanks!
2 side notes on the process:
1. Magisk no longer provides " .img.tar" patched files, so a tool like "Tar-tool" is required to convert the file from the ".img" type. The patched file should be renamed "boot.img" before conversion in order to be succesfully flashed by Odin.
2. like f4vr said, freeze the apps that give the error notification or just disable the specific notification. Hiding them in Magisk Hider does not seem to work
Cheers, and thanks again for the guide!
Click to expand...
Click to collapse
Just renaming magisk_patched.img to boot.img and adding to .tar file by 7zip worked for me.
We should ask a dev to update twrp for android 8.1
khatkhatik said:
This method root my P585 device but the sim card not working anymore until I odin official rom
also twrp-3.2.3-4-gtaxllte-OMNI6 not work and freeze on Samsung logo
there is no method to root android Oreo P585 Realllllly????
Click to expand...
Click to collapse
Same freeze for me with the Omni - can't do anything outside of access download mode
Same Problem
cmzizi said:
Is anyone able to run TWRP on P580 running Oreo?
Im having problems with my Tab stuck on a black screen instead of recovery mode.
Please help.
Thanks!!
Click to expand...
Click to collapse
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
Really wish this wasn't the case. I'd actually keep this thing if it had a working TWRP.
On my SM-P580 I used Odin and TWRP I don't get the black screen but when I reboot to get into TWRP recovery mode it shows the padlock and says swipe to unlock. Tried many times bit cannot swipe and cannot get past this. All I want is to be able to use the SD card as internal storage. HELP???? Thanks!!
luinkazofeifa said:
I have the same problem. It just keep getting to the bad TWRP, it seems that it does not work with the SM-P580. I had to flash stock firmware to get it back to work.
Click to expand...
Click to collapse
thanks in advanced
where can i find stock firmware?
I've just installed magisk using TWRP via command line. P580
I've just installed magisk using TWRP via command line.
Read the entire post before trying this yourself.
I installed the latest TWRP, the one that bugs and doesn't display anything, this allows to root without wiping data. I'm running the latest korean firmware for P580.
Just do this:
1. Launch TWRP and INMEDIATELY LOCK YOUR SCREEN. (I got ghost stripes that disappeared after 2 days when testing this, work with low light so you can notice your screen whenever it tuens on) Please don't forget this point, don't [temporarily] damage your screen as I did.
2. adb push Magisk-v[Current version].zip external_sd
3. adb shell
4. twrp install external_sd/Magisk-v[Current version].zip
After this you just need to install MagiskManager-v[Current version].apk and you will be all done.
But there is one thing...
If you ever get into recovery mode, there is no way out without using adb as far as I know. You can launch download mode and cancel it but you'll boot back to TWRP.
When in twrp touching your screen or any button will wake the device up and will start burning the ghost image to your screen.
So if you know of a method for rebooting to system without using adb, please let me know.
Also a solution for this would be to flash back the stock recovery, wich may or may not force to wipe system, that something that needs to be tested tho.
Update: Ok so, you can use a handy tool called MTKroot on recovery.img.lz4 to get recovery.img, then use 7z to pack it into a tar file and flash that tar file with odin (AP, same as TWRP)
This way you will not have a 0.001% chance of random boot into recovery mode and damage your screen
Hi guys,
Easy way to flash TWRP from computer for Mi 8 SE.
Download suitable file from below.
Twrp 3.2.3-1227 Compatible with Android 9 (Beta v8.12.27 and upper versions)
https://www.mediafire.com/file/qtdm3qlivcn4gmw/MI8_SE_TWRP_Yukleme_Araci_81227.zip/file
Twrp 3.2.3-1102 Compatible with Android 8.1 (Lower versions than Beta v8.12.27)
https://www.mediafire.com/file/bsvuaxcg1vghayz/MI8SE_TWRP_Yukleme_Araci.zip/file
1. Your phone bootloader should be unlocked.
2. Make sure USB drivers are installed to PC.
3. Turn on USB Debugging. Settings - More - Developer Options - Usb debugging
4. Press Volume down + power button and reboot to fastboot mode.
5. Connect your USB cable to PC
6. Unzip downloaded package and run twrp-yukleme.bat file.
7. Press enter to continue. When it's done enter to exit program.
8-For steady TWRP install Magisk16.4 when you boot into TWRP.
Thanks to by.Trabzonlu from miuiturkiye
downloaded multiple times
unpacking gives a bug
I tried both links
olinen said:
downloaded multiple times
unpacking gives a bug
I tried both links
Click to expand...
Click to collapse
Thanks for your report.
Links and zips are updated. It should unzip fine now :good:
it's ok, just that I had to run the program first and only after that I joined the mobile in the fastboot. Otherwise, he made a mistake
Thx :good:
9
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me
Alimataei said:
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me
Click to expand...
Click to collapse
TWRP 3.2.3 12-17 works for android 9 ?
TacoNikky said:
TWRP 3.2.3 12-17 works for android 9 ?
Click to expand...
Click to collapse
1102 also works for Pie.
I try to install this recovery but nothing happens at all I have installed the rom miui.eu 10.2.2.0 apparently this rom mr deleted the recovery that had already installed before installing this rom:crying:
Have someone trying treble gsi rom? How to proper install? Thanks in advance.
TWRP-3.3.0-0423 whit magisk 19.0 root For Xiaomi mi8 SE
Download Link:
https://mega.nz/#!CrhTmKgY!PE7lXdLtCzPqYO55ulCx2faFLVqPi6mpXXaYOnbbB8s
Could it be possible that this TWRP will work on mi 9 se, too?
Sent from my [device_name] using XDA-Developers Legacy app
putti71 said:
Could it be possible that this TWRP will work on mi 9 se, too?
Click to expand...
Click to collapse
This is mi8se forum!! TWRP is specific for each phone (different kernel, processor...) so there's no way you could install this TWRP img on another phone than Sirius
Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?
Hi! Is there an updated twrp for miui 11 android 10. First time to install this.
greendra8 said:
Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?
Click to expand...
Click to collapse
Same as mine. How's your device now?
---------- Post added at 08:16 AM ---------- Previous post was at 08:13 AM ----------
Hi guys. Im getting the error after flashing twrp. At first it works. I will flash rom so i reset it and wipe al data. But it didn't boot into recovery mode. It stays at fastboot. I just dl this installer from somewhere here in xda so i didint know thatmagisk should be flashed afterward. Pls help. I . getting error authentication failed
Trojan00 said:
Same as mine. How's your device now?
Click to expand...
Click to collapse
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.
greendra8 said:
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.
Click to expand...
Click to collapse
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?
Trojan00 said:
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?
Click to expand...
Click to collapse
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.
greendra8 said:
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.
Click to expand...
Click to collapse
Bro i downloaded the stock fastboot firmware. But in mi flash it says can not found file flash_all.bat
Today I updated my Asus Zenfone max Pro M2 to pie via fota update.
After successful installation the phone rebooted,
And then the thing happened, screen keeps blinking.
Any suggestions? I have 6gb varient
Fix for screen blinking after pie stable fota update
Vikassir33 said:
Today I updated my Asus Zenfone max Pro M2 to pie via fota update.
After successful installation the phone rebooted,
And then the thing happened, screen keeps blinking.
Any suggestions? I have 6gb varient
Click to expand...
Click to collapse
1.First unlock the bootloader of your phone.
2.Download Oreo fastboot rom raw zip file.
3.Install the necessary drivers and platform tools in your laptop.
4. Extract the rom zip file.
5. Copy all contained files in the rom file and paste in the platform tools folder.
6.Now enable usb debugging and connect phone to the laptop.
7.Enter the platform tools folder and open cmd and write "adb reboot bootloader"
8. Now once you are in fastboot mode double click on Flash_All.cmd in platform tools.
9.After that you will boot your system in oero build .
10.Now final stem check for system updates and you will get a fota update arround 800mb
11.After the update done you are good to go.
12. For further any quarry you can contact me(Whatsapp+call) : 8670647386 Gmail: [email protected]
WARNING!! : 1. DO NOT UPDATE IN PIE AFTER 800mb UPDATE UNTILTHE NEXT PIE UPDATE IS COMMING.
2. ANY MISTAKE CAN BRICK YOUR DEVICE I WILL NOT BE RESPONSIBLE FOR THIS.
All the links and screenshots will be given tomorrow.
subhojit2016 said:
1.First unlock the bootloader of your phone.
2.Download Oreo fastboot rom raw zip file.
3.Install the necessary drivers and platform tools in your laptop.
4. Extract the rom zip file.
5. Copy all contained files in the rom file and paste in the platform tools folder.
6.Now enable usb debugging and connect phone to the laptop.
7.Enter the platform tools folder and open cmd and write "adb reboot bootloader"
8. Now once you are in fastboot mode double click on Flash_All.cmd in platform tools.
9.After that you will boot your system in oero build .
10.Now final stem check for system updates and you will get a fota update arround 800mb
11.After the update done you are good to go.
12. For further any quarry you can contact me(Whatsapp+call) : 8670647386 Gmail: [email protected]
WARNING!! : 1. DO NOT UPDATE IN PIE AFTER 800mb UPDATE UNTILTHE NEXT PIE UPDATE IS COMMING.
2. ANY MISTAKE CAN BRICK YOUR DEVICE I WILL NOT BE RESPONSIBLE FOR THIS.
All the links and screenshots will be given tomorrow.
Click to expand...
Click to collapse
Fastboot ROM?????? Where can we get fastboot ROM from? I am searching from last few days, but I didn't get the fastboot ROM.
nice_guy75 said:
Fastboot ROM?????? Where can we get fastboot ROM from? I am searching from last few days, but I didn't get the fastboot ROM.
Click to expand...
Click to collapse
Download This Version WW-15.2016.1812.179 OR WW-15.2016.1901.186 (revert back to oreo from android p)
RedRobbin said:
Download This Version WW-15.2016.1812.179 OR WW-15.2016.1901.186 (revert back to oreo from android p)
Click to expand...
Click to collapse
@RedRobbin
There are no active links,
The blinking problem solved by itself, I don't know what changed, but now no blinking any more
Vikassir33 said:
The blinking problem solved by itself, I don't know what changed, but now no blinking any more
Click to expand...
Click to collapse
Sadly my phone is still giving me this screen blinking issue.
Anything you remember particularly doing before your phone was fixed?
nice_guy75 said:
@RedRobbin
There are no active links,
Click to expand...
Click to collapse
You can download from official website its size around 1.7 gb
RedRobbin said:
You can download from official website its size around 1.7 gb
Click to expand...
Click to collapse
Official site does not have fastboot ROM, those zips are meant to be flashed via stock recovery.
Sent from my ASUS_X01BDA using Tapatalk
Is there a technical reason why you can rollback to the last month's ROM from the Asus website with the stock recovery? Has the filesystem changed or something?
nice_guy75 said:
Official site does not have fastboot ROM, those zips are meant to be flashed via stock recovery.
-- Flash stock recovery
-- Put downloaded zip file into external SD
-- Boot into stock recovery
-- Apply update from external storage and locate file
-- done
Click to expand...
Click to collapse
RedRobbin said:
nice_guy75 said:
Official site does not have fastboot ROM, those zips are meant to be flashed via stock recovery.
-- Flash stock recovery
-- Put downloaded zip file into external SD
-- Boot into stock recovery
-- Apply update from external storage and locate file
-- done
Click to expand...
Click to collapse
That I know, I wanted to have Fastboot ROM, which can be flashed via PC.
Click to expand...
Click to collapse
I tried to install the laat Oreo ROM from the Asus website using stock recovery but it failed with a message something like, you can't flash an older version than the one installed.
damole said:
Is there a technical reason why you can rollback to the last month's ROM from the Asus website with the stock recovery? Has the filesystem changed or something?
Click to expand...
Click to collapse
Dear simply visit any Asus service center they will downgrade it to Oreo, I visited today, and one interesting thing is they don't have any stable update for now . Soon a newer fota update will release.
damole said:
I tried to install the laat Oreo ROM from the Asus website using stock recovery but it failed with a message something like, you can't flash an older version than the one installed.
Click to expand...
Click to collapse
First flash twrp then wipe everything except sd card and then flash stock recovery and try again
I posted here about the issues I had. I know that at first the problem is the old firmware can't be installed over newer firmware, when I fix that problem the zip package is no longer signed correctly.
Please could you explain why the method you suggest will work.
Yes it's work i done with 2 max pro m2
damole said:
I posted here about the issues I had. I know that at first the problem is the old firmware can't be installed over newer firmware, when I fix that problem the zip package is no longer signed correctly.
Please could you explain why the method you suggest will work.
Click to expand...
Click to collapse
In case of system update failure the zip file you are trying to flash will be corrupted. (Happened with me many times as i renamed the oreo stock rom to above the build number of the pie update so my phone would treat the downloaded oreo rom to be new .but during the system update after reaching aroung 25 % it displayed an error and the next thing i remember is the zip file getting corrupted) so always keep a backup!
On 25th of april new pie update was released which fixed screen blinking issue.