Hi there!
I have a p9 lite ds vns-l21. I have succesfully install nougat (c432b336) on it but I want to upgrade to the latest n build. Updater app doesn't show any downloadable version says that I already on latest firmware. So I find a thread to make it work by install c185 oeminfo and firmware c185b360. I succesfully manage to install it, but I want to go back to c432 oeminfo and than istall c432b370 or b380. After install oeminfo c432 I can't install b370 so decided to start from original firmware so put update.app on sd card (b130), it install as it should and when it reaches 100% it goes to black screen. I waiting for it to boot up, but it isn't.
The device doesn't react any button press. It's not boot (long press power), not enter recovery (Vol up + power), no fastboot (Vol dwn + power) and no 3 button method.
I try to charge it, but its completly unresponsive.
Any ideas guys?
You cooked your motherboard.
Can i have a slice too?
Let the phone charge for a night and see what happens
Thanks for trying to help!
I left it on chaeger over the night but at morning it won't turn on.
I try another method from this thread:
https://forum.xda-developers.com/hu...hed-black-screen-bip-green-t3485836?nocache=1
but linux doesn't see my device too, so I will use my warranty (this device is only 6 month old) and see what will happen.
cheers
Hi,
Same problem here. how did you finally solved it ?
Sry about my english
I tried to unlock bootloader using srktool and its done,
then i tried to install TWRP recovery using srk tool, but it's not done. after trying several time i got same result. finally I tried to lock bootloader. then its shows
< ERROR MODE
Attention!
please update system again .
Error!
Funk NO :11 (recovery image)
Error NO : 2 (load failed!) >
Phone not connected with pc and or turn off either. when press power button its also restart and show same screen
plz help me to resolve this problem.
(huawei VNS-L31)
Thazla said:
Sry about my english
I tried to unlock bootloader using srktool and its done,
then i tried to install TWRP recovery using srk tool, but it's not done. after trying several time i got same result. finally I tried to lock bootloader. then its shows
< ERROR MODE
Attention!
please update system again .
Error!
Funk NO :11 (recovery image)
Error NO : 2 (load failed!) >
Phone not connected with pc and or turn off either. when press power button its also restart and show same screen
plz help me to resolve this problem.
(huawei VNS-L31)
Click to expand...
Click to collapse
put you last version on dload past and force installacion
Also, to get out of that mode in your situation you'll need to wait for the battery to run out so the phone turns off, then you can use button combinations to enter the other modes again and use the traditional methods of recovery.
stuck on error mode
Hi everybody, I have the same problem. I unlocked the bootloader, and after a month I tried to re lock the bootloader because I couldn't update to a higher version of EMUI. I can't switch off the phone, I even opened it and switched off by pull off the electric connections of the battery. Then I dowloaded update.app and put it into a folder named dload on my sdcard, then I pressed together the up, the down volume and the power buttons, but I came back to the error mode display. Elsewhere here someone suggested to quickly plug the usb cable with volume down after restart, but for me nothing worked. I'm a newbie, so a lot of terms I don't understand.
Hi to everyone ^^
I have here a P8, stuck on boot with the "TIM" logo (operator). I can't even shutdown it.
Is not mine and I still need to know more information about which firmware it had before get this sort of brick, anyway...
I can't enter in recovery (Power-vol+)
I can't enter in EMUI mode ( Power- Vol+ - Vol -)
....BUT I can enter in fastboot&rescue mode.
I've already unlocked the bootloader and I can flash everything....but still, I can't get access to the recovery or EMUI mode T___T
Does exist a "Generic" firmware that works for unbrick this phone?
Do you have any suggest or link for some Recovery/Boot/Cust file?
Thanks in advance for any answers.
Hello , You are in hard step !
Install HiSuite on your PC and use Recovery Tools official Method from Huawei.
NAViDArt said:
Hello , You are in hard step !
Install HiSuite on your PC and use Recovery Tools official Method from Huawei.
Click to expand...
Click to collapse
Already tried.
This is the result...The device doesn't support system recovery.
Sorry for the multi-post T__T
Anyway this is my situation...I can just use the fastboot, or see the "Bootlogo" for the rest of my life......(or battery )
Have you tried a forced update by placing a full ROM named "Update.app" in a folder called "DLOAD" on the external SD card and then pressing and holding all three buttons ?
Yep, already done...
No response.
SD ready, power on the phone holding all three buttons, but nothing to do... it just start normally and get stuck on logo. =(
Softtm17 said:
Yep, already done...
No response.
SD ready, power on the phone holding all three buttons, but nothing to do... it just start normally and get stuck on logo. =(
Click to expand...
Click to collapse
Have a look at Dc Phoenix :-
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
https://forum.xda-developers.com/huawei-p8/how-to/guide-how-to-unbrick-huawei-p8-failed-t3260704
Hey all,
I received a huawei p9 lite (VNS-L31) from a friend of me. He asked me if i could take a look at it as he said he updated it and now his phone is broken.
I was taking a look at it but as soon as i want to power it up it don't respond, as soon as i put it on a charger (Phone or usb)
A red light is blinkin, then i can hold the power button. Then the red light is blinking 3 times very fast and then it just go's back to blinking.
I tried also some other things but none of them work.
- Wont boot into recovery mode
- Will boot into fastboot
; Phone Locked
; FRP Locked
- Tried the 3 button download mode (Wont do anything to sadly...)
Anyone got a suggestion what else i can try to do to make the phone work again if its not perma broken yet?
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you
zgfg said:
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you
Click to expand...
Click to collapse
Moved from P9 forum.
Mike
michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
tried unlock service? I recommend this.
RyotaGamer said:
tried unlock service? I recommend
Click to expand...
Click to collapse
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me
michel_duenas said:
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me
Click to expand...
Click to collapse
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".
RyotaGamer said:
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".
Click to expand...
Click to collapse
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo
michel_duenas said:
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo
Click to expand...
Click to collapse
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.
RyotaGamer said:
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.
Click to expand...
Click to collapse
1- No, I don't have bootloader unlock code.
2- In fastboot mode it appears to unlock FRP and unlock bootloader ... but when trying commands from fastboot mode I get an error: FAILED (remote: command not allowed). I found the phone with the fastboot devices command. The mobile shows on the fastboot screen that Phone unlocked but I sincerely believe (by not admitting any code for fastboot) that the bootloader is locked.
3- The Huawei logo lasts forever ... until it has finished with the battery capacity. And I can not charge the battery because whenever I put the USB charger the phone is fixed and stays in the Huawei logo for centuries and centuries.
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
5- In fastboot mode, it launched the "fastboot restart recovery" command but does not restart in recovery mode, it restarts but shows the Huawei logo. Tried the command "fastboot flash recovery recovery.img (TWRP)" but it does not flash and throws the FAILED error (remote: command not allowed)
6- All the commands and tests I do without SD card and without SIM card
7- Tried by pressing the power button 10 seconds (9 seconds, 15 seconds, 30 seconds, 5 seconds .... etc) There is no way always fix showing the Huawei logo and it does not leave there. Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Thank you for your interest. But I'm still trying to find a solution.
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option
michel_duenas said:
2- In fastboot mode it appears to unlock FRP and unlock bootloader
Click to expand...
Click to collapse
how did you unlock without code?
michel_duenas said:
Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Click to expand...
Click to collapse
you can't boot recovery while charging.
michel_duenas said:
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option
Click to expand...
Click to collapse
yes. it is final option.
btw, did you flashed oeminfo before?
RyotaGamer said:
how did you unlock without code?
No, no, nooooo ... it's not unlocked. Apparently it is unlocked (it shows it like this) but when entering the codes by fastboot it does not admit them and the error that I told you comes out
you can't boot recovery while charging.
While charging I can't do anything. No recovery, no flash (3 buttons)., No boot ... ONLY fastboot
yes. it is final option.
Ok, I guessed it ... and I don't rule it out given the case I'm in.
btw, did you flashed oeminfo before?
Click to expand...
Click to collapse
The steps I have flaseado have been ROM for the three buttons and dload folder on SD card from here:
1- HUAWEI P9 LITE ROLLBACK PACKAGE (VNS-L31, FROM ANDROID 7.0 EMUI 5.0 TO ANDROID 6.0 EMUI 4.1, C900B300, ENGLISH)
2- VNS-L31C432B210-FULL, Region - Europe, State - Official, Type EMUI 4.1.3 Android 6
3- VNS-L31C432B371-FULL, Region - Europe, State - Official, Type EMUI 5.0 Android 7- Full Firmware
4- SUPER BRICKKK !!
PS I don't know anything about oeminfo, as such I haven't flattered any of this ... but I don't know anymore
michel_duenas said:
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
Click to expand...
Click to collapse
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.
RyotaGamer said:
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.
Click to expand...
Click to collapse
Thank you for everything and sorry for the inconvenience ..... I don't know if someone else offers me any more solution if I'm not forced to DC-Phoenix
did you find solution? i'm in the same boat and can't get unlock code. I don't mind paying for it even. Huawei F'ed us all with their latest stunt