Hello, I am new here, but problem is huge! I switched off OEM Unlock and forgot to switchit on again, when I switched my phone off again. I have huge problem, because I can't get new ROM. I can only enter DL mode and Odin can't read a file! I clicked "Start" few times, but:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> J320FNXXU0AQE3_J320FNTMS0APJ1_J320FNXXU0AQC7.tar.md5 is valid.
<OSM> Checking MD5 finished successfully..
<OSM> Leave CS..
<ID:0/003> Odin v..3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
I may have USB Debugging disabled too. Is there any hope to resurrect my phone?
EDIT: I've done it, but it still has FAP Lock.
Edit1: I did it, it works again, but I got bootloop :/
Related
Hi guys yestarday i was try to get back to stock firmware after i have flashed a custom rom ([ROM][ICS][4.0.3][BUILD23][BETA2.02][add ons]AOKP-android open kang project) and from that moment when i turned on odin and started it, it all went wrong! Odin dosent not do his job!
yestarday odin did this
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5 is valid.
<OSM> MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Today i downloaded the sam firmware (because i have been told that the firmware i have is bad) so i downloaded another one.
put my mobile in downloade mod, set the files where they belong, connected the phone with my usb, and started.
this is what odin did
<OSM> GT-I9000-CSC-MULTI-OXAJVU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1684)
<OSM> All threads completed. (succeed 0 / failed 1)
I need wxperienced people to anserw me this or anybody who had something like thhis kind of a problem!
Pls help!
I dont know what to do anymore
I want my phone back!!!
Untick re-partition.
+1
Alson try to install any ROM with diff. versions of ODIN.
I am trying to flash 4.3 firmware onto my S4 using odin but get the following error, any ideas? I have the de bugger selected, all drivers installed as far as I am aware of?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506DTMBNA1_I9506XXUBML2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Thanks
Rotagirl2002 said:
I am trying to flash 4.3 firmware onto my S4 using odin but get the following error, any ideas? I have the de bugger selected, all drivers installed as far as I am aware of?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506DTMBNA1_I9506XXUBML2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Thanks
Click to expand...
Click to collapse
Try a different cables/ports
Have noticed that my phone does not connect to samung kies does even though when I plugg my phone in windows says drivers installed? If not connecting to kies could this be the issue.
Repulsa said:
Try a different cables/ports
Click to expand...
Click to collapse
Thanks, just tried using a different port and seems to be working now.
Repulsa said:
Try a different cables/ports
Click to expand...
Click to collapse
Okay so my S4 was just fine until an update broke the wifi usage. I tried doing what I was told would probably help by trying to flash it back to how it was, but that didn't work, and I ended up with a warning message each time I power on my S4 "System Software not authorized by Samsung has been found on your phone."
It won't boot past this, and when powered off, and plugged into my computer it constantly vibrates, on and off.
I've tried flashing the Sprint Stock S4 rom, but that only leaves me with a failure message in Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope you guys can help me.
Gentooman said:
Okay so my S4 was just fine until an update broke the wifi usage. I tried doing what I was told would probably help by trying to flash it back to how it was, but that didn't work, and I ended up with a warning message each time I power on my S4 "System Software not authorized by Samsung has been found on your phone."
It won't boot past this, and when powered off, and plugged into my computer it constantly vibrates, on and off.
I've tried flashing the Sprint Stock S4 rom, but that only leaves me with a failure message in Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope you guys can help me.
Click to expand...
Click to collapse
Try KIES recovery mode
Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
blackyto1995 said:
Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
Click to expand...
Click to collapse
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
GDReaper said:
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
Click to expand...
Click to collapse
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
Oh, hai!
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
GearCM Recovery
Unofficial TWRP 3.0.2-1
Sent from my ASUS_Z00A using XDA Labs
Im trying to downgrade back to Marshmallow so i can spoof on pokemon go and it seemed to run better and take up less battery. I downloaded the stock images but i keep getting an odin fail
On the phone it says SW REV FAIL: [aboot] Fused 5 > Binary 1
and this is the error on odin
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help