Im trying to downgrade back to Marshmallow so i can spoof on pokemon go and it seemed to run better and take up less battery. I downloaded the stock images but i keep getting an odin fail
On the phone it says SW REV FAIL: [aboot] Fused 5 > Binary 1
and this is the error on odin
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help
Related
I got my Samsung galaxy S4 GT-i9505 with build number I9505XXUEMK9.
After I got it, I noticed the LTE option is not available and after some research, I found out I have to edit one file with rooting.
So I went to try rooting with KingoRoot APK, and eventually got KNOX warning everywhere, I edited the file that hides the LTE network option and tried to remove root from the app but failed. I didn't really care because KNOX eventually stopped appearing and I can use LTE just fine.
I noticed an update for this phone around December 2015 which is Lollipop 5.0.1 from the internet and want to revert it back to official ROM.
At the moment, the phone's current status is "Custom".
My phone has been factory reset because of some reason and the LTE option is gone again. The status is still custom and KingoRoot SuperUser is still there.
I finally tried to root it for real this time by following this guide http://www.teamandroid.com/2013/11/30/root-xxuemk9-android-43-galaxy-s4-lte-i9505-firmware/
As I try it, the Odin give me FAIL status and I don't know what to do so I just put out the battery.
After trying to boot, the screen shows me "Firmware upgrade encountered an issue"
Then I tried to just flash everything to stock and upgrades to the lollipop instead so I went following this guide : http://forum.xda-developers.com/showthread.php?t=2265477
I downloaded new Odin3 v3.10 and Latest lollipop 5.0.1 I9505XXUHOA7_OXAHOA7.zip from above link
I browsed BL, AP, CP, CSC without PIT file in odin and tried to flash it, FAIL occured
I tried again with PIT file, same FAIL
this is the screenshot
https://www.dropbox.com/s/p9cmlval55sexcd/2016-04-18 21_18_36-Greenshot.png
The odin log shows this
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9505OXAHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
The phone however, only shows :
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM (it was official before I tried rooting)
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
START [224,1440]
START [224,1440] (2nd attemps with PIT file)
Please help, I really need to fix this soon. Thanks!
FIXED
I just switched to my laptop and try flashing via laptop and it works without problem!
Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
blackyto1995 said:
Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
Click to expand...
Click to collapse
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
GDReaper said:
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
Click to expand...
Click to collapse
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
Oh, hai!
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
GearCM Recovery
Unofficial TWRP 3.0.2-1
Sent from my ASUS_Z00A using XDA Labs
Hi. Recently i've updated my Note 5 to Nougat and trying to root my phone. At first when i flashed TWRP is successful.
But after that my phone just bootloops endlessly. I tried flashing back to the stock but my device says SYSTEM REV. CHECK FAIL. DEVICE:1 BINARY: 0
please help me as im in need of my phone and all my important datas is inside my device :crying::crying::crying:
and here i include odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Now I have this problem with my galaxy s8 SMG950FD
When it tryes to turn on it gets the following message: "Custom binnary blocked by FAP Lock."
I can't go in the TWRP, It just turn on with thee menssage above every time.
When I tryed Entering the Download mode to flash the original ROM, it enters, but when I upload the files and press start, Odin show a "FAIL!"
Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> param.bin
<ID:0/006> userdata.img
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 4162 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> up_param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And apear the flowing message on the phone: SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY:5
I'm stuck, someone please help me!!
Sasuke1013 said:
Now I have this problem with my galaxy s8 SMG950FD
When it tryes to turn on it gets the following message: "Custom binnary blocked by FAP Lock."
I can't go in the TWRP, It just turn on with thee menssage above every time.
When I tryed Entering the Download mode to flash the original ROM, it enters, but when I upload the files and press start, Odin show a "FAIL!"
Odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Removed!!
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> param.bin
<ID:0/006> userdata.img
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 4162 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> up_param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And apear the flowing message on the phone: SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 6, BINARY:5
I'm stuck, someone please help me!!
Click to expand...
Click to collapse
Your flashing a firmware with an older bootloader! Device 6 binary 5. Flash the latest firmware, one with U6 bootloader and it will work
I did the whole conversion (minus Magisk) and was wondering if I am able to restore th eoriginal Samsung firmware? I tried using Odin with the last official firmware for gts4lvwifi from SamMobile, but it fails. I was wondering if I had to Odin a different VBmeta.img first, or something.
Thanks.
Here is the Odin log when I try to flash original firmware.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 7098 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> abl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Download screen has red warning text
SW REV CHECK FAIL : [ab] Fused 3 > Binary 2