Hi guys yestarday i was try to get back to stock firmware after i have flashed a custom rom ([ROM][ICS][4.0.3][BUILD23][BETA2.02][add ons]AOKP-android open kang project) and from that moment when i turned on odin and started it, it all went wrong! Odin dosent not do his job!
yestarday odin did this
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5 is valid.
<OSM> MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5 is valid.
<OSM> GT-I9000-CSC-MULTI-OXAJVU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Today i downloaded the sam firmware (because i have been told that the firmware i have is bad) so i downloaded another one.
put my mobile in downloade mod, set the files where they belong, connected the phone with my usb, and started.
this is what odin did
<OSM> GT-I9000-CSC-MULTI-OXAJVU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 1684)
<OSM> All threads completed. (succeed 0 / failed 1)
I need wxperienced people to anserw me this or anybody who had something like thhis kind of a problem!
Pls help!
I dont know what to do anymore
I want my phone back!!!
Untick re-partition.
+1
Alson try to install any ROM with diff. versions of ODIN.
Related
Hey guys,
I think I bricked my phone beyond repair! I attempted to use Odin to Restore my phone to MF3 stock using the tar files that were generously provided. During the Odin restore it failed, not sure what exactly happened. I have used the same files to restore the same mf3 phone on two other occasions. Now my phone won't boot to recovery or Odin mode and just says that firmware update encountered an issue. Please select recovery mode in Kies and try again. The Kies recovery never works and I am left with a phone that is a brick. Will bestbuy be able to do anything through the smart tool? Or anything I can do?
Thanks!
Sent from my iPhone using Tapatalk
You could try here...
http://forum.xda-developers.com/showthread.php?t=2360859
or pull the battery, wait a minute, and put it back and see if you can use the correct key combination to get back into download mode and try ODIN again.
Thanks for the suggestions. But nothing seems to kick it out of this Kies recovery mode. I'm sending it back to samsung. Hopefully they can repair or ship me a new device as I am still under warranty.
Sent from my iPhone using Tapatalk
dtruong23 said:
Thanks for the suggestions. But nothing seems to kick it out of this Kies recovery mode. I'm sending it back to samsung. Hopefully they can repair or ship me a new device as I am still under warranty.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Same thing happened to me.. I worked for hours and finally about gave up, but tried flashing the I337 PIT file thru Odin in the Pit option.. It said failed but I pulled the battery and rebooted into recovery then restarted.. Google for the pit file.. It's on my computer but if you can't find it I can upload it for you.. Good luck!
Btw, the screen that says "firmware has encountered an issue" should still be able to be recognized in Odin..
I had to get on my computer anyway, so here is the file I used for the PIT box in Odin 3.09.. Hope it works for you!
https://www.dropbox.com/s/fptxnxsqevjhnt9/SGS-I337_16GB.pit
im having a simular problem. I keep getting this error when i try to use odin to restore back to stock.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
iammeHD said:
im having a simular problem. I keep getting this error when i try to use odin to restore back to stock.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Did you do the latest update to MK2?
nerdyblonde said:
Did you do the latest update to MK2?
Click to expand...
Click to collapse
Im not sure what that is, i just wiped my phone and now im stuck at a boot loading screen and i can get recovery/download, and i was told to use odin to flash back to stock
So i purchased my s4 today at a best buy, and i followed the following guides to root my phone and now im stuck at the boot logo screen. I can access recovery (i used Safe Strap, but it wont let me get to it as i have to get past this screen im stuck at) and download mode. Any help will be great as, im really new at all of android rooting and dont know much about it.
I have been told to use odin to flash back to stock, but i get the following error on odin 1.85
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I would try Odin again. Sometimes it can take multiple attempts
And you're sure you're on MF3? just checking
Okay so my S4 was just fine until an update broke the wifi usage. I tried doing what I was told would probably help by trying to flash it back to how it was, but that didn't work, and I ended up with a warning message each time I power on my S4 "System Software not authorized by Samsung has been found on your phone."
It won't boot past this, and when powered off, and plugged into my computer it constantly vibrates, on and off.
I've tried flashing the Sprint Stock S4 rom, but that only leaves me with a failure message in Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope you guys can help me.
Gentooman said:
Okay so my S4 was just fine until an update broke the wifi usage. I tried doing what I was told would probably help by trying to flash it back to how it was, but that didn't work, and I ended up with a warning message each time I power on my S4 "System Software not authorized by Samsung has been found on your phone."
It won't boot past this, and when powered off, and plugged into my computer it constantly vibrates, on and off.
I've tried flashing the Sprint Stock S4 rom, but that only leaves me with a failure message in Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope you guys can help me.
Click to expand...
Click to collapse
Try KIES recovery mode
Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
blackyto1995 said:
Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
Click to expand...
Click to collapse
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
GDReaper said:
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
Click to expand...
Click to collapse
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
Oh, hai!
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
GearCM Recovery
Unofficial TWRP 3.0.2-1
Sent from my ASUS_Z00A using XDA Labs
I need to make this SM-J530F work again in a day, I've tried installing supposedly OEM Stock, because all custom roms have had issues, either terrible sound issues, lock due to aosp and samsung payment app missing. random semi bricks. I don't need this ****e right now. I hope someone can recommend a rom which wouldn't have any bugs, or help me install the stock OEM rom, which i then hopefully can MicroG, and OpenGapps, supersu.
I've tried two different files now through odin and they both failed. I'm not sure what's wrong, device is wiped, put in download mode and connected to odin. Blue checks out it seems to start. But ultimately fails. The firmware files were zip files, I tried chaning it to .tar, and tried loading in AP alone, and AP, and all the others, alternating between two csc files which were included inside the .zip.
Re partitioning is not on.
Twrp 3.3
SM-J530F
Odin 3.13
Here's what happens when I first tried to just use the AP, and then all the files inside the OEM ROM file.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 2909 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:13130560/000> Odin engine v(ID:3.1301)..
<ID:13130560/000> send REBOOT_ODIN command (COM:6)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 2983 M
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
second attempt
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 2909 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 2983 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Device purchased from Sweden.
ClownWorld said:
I need to make this SM-J530F work again in a day, I've tried installing supposedly OEM Stock, because all custom roms have had issues, either terrible sound issues, lock due to aosp and samsung payment app missing. random semi bricks. I don't need this ****e right now. I hope someone can recommend a rom which wouldn't have any bugs, or help me install the stock OEM rom, which i then hopefully can MicroG, and OpenGapps, supersu.
I've tried two different files now through odin and they both failed. I'm not sure what's wrong, device is wiped, put in download mode and connected to odin. Blue checks out it seems to start. But ultimately fails. The firmware files were zip files, I tried chaning it to .tar, and tried loading in AP alone, and AP, and all the others, alternating between two csc files which were included inside the .zip.
Re partitioning is not on.
Twrp 3.3
SM-J530F
Odin 3.13
Here's what happens when I first tried to just use the AP, and then all the files inside the OEM ROM file.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 2909 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> boot.img
<ID:0/006> __XmitData_Write
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:13130560/000> Odin engine v(ID:3.1301)..
<ID:13130560/000> send REBOOT_ODIN command (COM:6)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 2983 M
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
second attempt
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 2909 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 2983 M
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Device purchased from Sweden.
Click to expand...
Click to collapse
Did you start Download mode throught TWRP or button combination?
(It didn't work for me if I rebooted to download mode throught TWRP)
EDIT: Another thing that poped up in my mind is launching ODIN in administrator mode.
EDIT: You might have the wrong version of bootloader