Zte Nubia z17 lite - ZTE Nubia Z17 Questions & Answers

Good afternoon,
Im new to this forum im trying to get some help for my nubia z17 lite,i started a thread here because i didnt see an option for nubia z17 lite, if anyone can move my thread or direct me to something i miss i appeciate it. S
So recently i got a z17 lite and i moticed i couldnt spoof for pogo because the rom installed was constructing me, so i started my adventures for the first time on installing a custom rom on my phone, i did alot of things and in the end i think i royally messed it up because my entire intneral storage got wipped like not a single thing exists on it.
I cant even hold the volume buttons + power button to get into bootloader anymore and the last thing i tried was installing qualcomm as a port in my device manager to see if i could use nubias emergency recovery to reset back to the rom i purchased it with. My issue tho is i cant even get into bootloader. Does anyone have any guides they can point me too or is ny phone completed fried and should just use it as a paper weight

Jesi li Croat jer si Hrvat?
Here's the solution, if you run out.
https://forum.xda-developers.com/general/help/how-to-restore-hard-bricked-zte-q505t-t3625089
Download the adb drivers from these page and install them properly.
https://romprovider.com/2018/07/nubia-z17-lite-twrp-root/
Download the official ROM from this site:
http://ui.nubia.cn/rom/detail/46 (v 2.08)
You will need this tool:
https://www.aryk.tech/2016/12/toolstudio-emmc-download-tool-helps-you.html
https://freeandroidroot.com/download-emmc-dl-tool/

Jesom hrvat, ali zivim u kanadi pa onda ja to stavim na engleski "croat"

Croat25 said:
Jesom hrvat, ali zivim u kanadi pa onda ja to stavim na engleski "croat"
Click to expand...
Click to collapse
Jeli li uspio popraviti telefon?

mogu razgovarati i citati ali ne mogu pisati najbolje, I cant install the Qualcomm drivers everything i try it just refuses to be installed correctly ive tried everything running install as admin and even trying to do it manually, unless im doing something completey wrong but i doubt it, my tcp port always seems to have that little yellow warning icon over it, i feel like if i can get the qualcomm drivers installed properly i can do the rest, i even looked for other guides installing it but nothing came up

Uf, I think I can not help you anymore.
Look at this Russian forum, they are much more active there and somebody will help you.
To use a google translator, it works relatively well.
https://4pda.ru/forum/index.php?showtopic=913601
https://4pda.ru/forum/index.php?showforum=576

Related

My Optimus got messed up, please help me!

Hello I searched all over for something like what happened to me but i didn't find anything. I bought my LG gt540 in Italy, I tried to update at the android 2.1 with the LG software but at the end of the update my phone is loading, I can hear the sound of the phone loading but nothing shows up on the display. My screen is blue.
I tried to flash it again with the v20a, v20b with KDZ UPDT but nothing is solving the situation.
I live in the USA and they already told me that they don't provide any kind of support for this phone because is not sold in the USA.
What can I do?
PLEASE HELP ME because I really don't know what to do.
The phone boot in download mode and if I touch the screen seems to me working.
I tried the update with 1notebook win 7 32bits,1 with 7 64bits, 1 with XP pro (but modded version called ICE).
I'm trying to install win xp pro on a pc just to try again.
Can anybody give me an idea?
try to flash, and flash again on several roms. phone might to work these roms.
Can anybody give me a list of rom officials or not to try that should be compatible with my cell phone?
Thank you
bar1kenoby said:
Can anybody give me a list of rom officials or not to try that should be compatible with my cell phone?
Thank you
Click to expand...
Click to collapse
Just want to share bout my experience... i forgot what my firmware ver was when my gt540 still in donut (android 1.6), but then the first eclair came (baltic rom v20b) then i applied it.
After awhile a rom with my country language came, but the version is v20a.. i tried to apply it, but always get error.i tried another rom (same ver v20a), and get Linux Kernel Panic.. dont know how to fix it (cant even go to download mode), brought it to lg service centre.. only took them 20 mins to fix that, and i look the firmware ver was v20b with my country language. So i guess the ver really matter..
Now im in froyo though
Sent from my GT540 using Tapatalk
well, when you bring this kind of phones in a LG center they flash it with a box, not with the software we use...I did it like job for so many years. The problem is that here in the USA nobody has this boxes because little stores that fix phones or customer centers are not existing. The LG told me that they don't support it here in USA because they don't sell it here and then they have no idea about how to fix it. If I was in Italy I was fixing in 20 mins too but the thing is that the versions that for right now I tried...don't work, 20a,20b.
What other versions could I try?
I have some news. The phone works and I understood what that is.
When is loading the android, is showing nothing but the blue screen...no logo in the boot etc etc...
The phone will stay like that until the key lock is not kicking in putting the phone in standby...When that happen i have to push the power on like if I want to turn on the display to use the phone normally and...like magic...everything show up again.
What could that be? and how can i fix this?...seems to me the boot loader but I'm not sure.
Thank you
Hi,
Did you try reset to factory defaults now, while it's working?
If that is no answer, try this
Good luck!
that's exactly the way i flashed my phone but i can't solve the problem of the standby...I resetted everything but nothing seems to solve this little problem.
Hmmmm....
Maybe you should read and try this!
Good luck.
Please post the results! (if you fix your phone like this method)

T-mobile move balance

I was looking for a cheap phone when i noticed this phone in the t-mobilie macedonia catalog.Now i've been doing some research and it turned out that this is actually a branded huawei u8600.But all the info i found on the huawei phone is in chinese , so if anyone knows any detailed specs like cpu , ram , screen size , anything please tell me.Also if there are any roms available even in chinese.And can we also add this phone to the list
Quick google search of the device brought up these specs
Some specs (all i know)
Processor at 800MHz (ARMv6)
512MB of RAM
Screen: 3.7'', 480x800px, unfortunately not multitouch
Camera: 5Mpx, AF, Flash
Battery: 1800 oreven 2000mAh embeded
WiFI, Bluetooth, GPS, HSDPA
Dimensions: 118,5x59,5x10,5mm
Android 2.3.5 Gingerbread
Click to expand...
Click to collapse
I just root it with SuperOneClick.
First i also found those specs but i wanted to know if anyone owned the phone and could tell me for sure(the guy that posted those specs says that he doesn't actually own the phone), second does anyone know if there are custom roms available , and third is it possible to upgrade to 4.0. the huawei phone is capable of running 4.0 but would the same roms(if there are any) work on this branded version
The phone is good,very good for that money... but unfortunately there r few bad sides like the phone doesnt have multi touch, very low internal memory and the camera isnt perfect but it satisfactory , furthermore the phone has AWESOME battery..
So PLEASE someone if knows how to root move balance pm me .. the root thing is only option for the phone cuz it has very low internal memory so with the root i can install and move things to the sd card.
btw the sepcs r like the guy said in the second post , also u can check in gsmarena about details
cipjanin said:
So PLEASE someone if knows how to root move balance pm me .. the root thing is only option for the phone cuz it has very low internal memory so with the root i can install and move things to the sd card.
Click to expand...
Click to collapse
I just say it couple posts above. I rooted my move-balance with SuperOneClick. Read the theme here at xda-developers
are there any overclocked kernels available
also any bugfixes or updates
.
Thread moved. Would advise you to read forum rules and post in correct section.
why no replies
someone knows how to reflash the rom on this phone?
stefan p said:
why no replies
Click to expand...
Click to collapse
Probably because it is a cheap phone that no developers are working on.
any one knows how to root this device? or enable multitouch?
cheers
Crap phone, just get one that already has multi touch enabled.
theking_13 said:
Crap phone, just get one that already has multi touch enabled.
Click to expand...
Click to collapse
gee thanks, you are very helpfull :facepalm:
pomos
dino_mk said:
I just root it with SuperOneClick.
Click to expand...
Click to collapse
dino_mk pozdrav
Mi treba malku pomos, pa bi te zamolil ako moze da se slusneme na nekoe drugo mesto ( fasebook, e-mail, i.t.n. )kako bi mi pomognal okolu root na mojot telefon
move balance. Znaes jas sum laik okolu ovaa rabota ,pa za da ne ostanam bez telefon.....hahahahaha
pozdrav
facebook....cakalov petar
[email protected]
071 223020
Vi blagodaram
Hey. Its impossible root with superonclick,z4roo,ginger,. ect. ect. ect..
i try ALL Progs,apps. NOTHING..
he give not the boot.img from
Adb pull dev/mtd/mtd0/Boot.img..
so watt ? mfg
can you me give your Driver from this phone pleace..
my driver say
? devices..
any port rom for this dev...
Please help
Anyone got lucky to root this? SuperOneClick 2.3.3 does not work for me. Stuck ton step #7
T-mobile move balance (huawei u8600)
hello! i dont know if im making the question in the right place but i need help!!! my phone known as t-mobile move balance (huawei u8600) its wifi doesnt want to turn on.. when i check the box to turn on the wifi it says WIFI CANNOT TURN ON !!!! i need help .. thank you

[Q] bricked??????

Hi folks need a little help,
I bought a defy and had cm7 on it and I wanted stock rom so I got the uk rom 2.2 I wanted then I sorted drivers out got latest rsd lite and flashed it. It said complete and passed.
The phone didnt re boot it was compleatly un responsive.
My thoughts was oh s**t so I flashed it with a difrant rom I got one from xda.
I flashed it then it all of a sudden rsd lite wont find phone.
Phone is un responsive. Tried turn on with vol + - both usb in out put battery in with vol + & - all sorts.
Only bit of life is if I put battery in then plug usb in the charging light comes on so I left it over night.
Any idears people. Im stuck and need help
Thanks.
Ive the same problem... :/
Im sure somebody will have an answer for us my friend.
Battery is empty.
Charge it with external charger or another defy.
O use this.
rsd lite will find the phone after that.
I think your defy originally flashed with a leaked 2.3.4 or higher stock rom so you can't use lower flashfile.
Ask the first owner for information.
(I think that defy is quite "unbrickable" , just find the right rom for it.
Thanks for that. I will give it a try.
buruss said:
Battery is empty.
Charge it with external charger or another defy.
O use this.
rsd lite will find the phone after that.
I think your defy originally flashed with a leaked 2.3.4 or higher stock rom so you can't use lower flashfile.
Ask the first owner for information.
(I think that defy is quite "unbrickable" , just find the right rom for it.
Click to expand...
Click to collapse
thank you so much for pointing me in the right direction it worked a treat,
thanks again.

ZTE Blade L2 UK

Hi peeps, I've asked this in a couple of threads but the posts look a little dead.
I need help which i know the answer is out there somewhere but mostly in Spanish. Thats what it seems when it comes to the ZTE devices.
Ok so i rooted my L2 and put a custom recovery on that I first come across but never used before Carliv Touch 2.2.
I made a back up and then found a KK ROM. I installed the ROM but it didn't give me any UK network, so I used my back up and all was fine.
A couple of weeks later I done a stupid thing and completely wiped my device android along with it. I can still get in to the recovery but my backup says MD5 mismatch. I downloaded a custom ROM to my desktop and tried to sideload it in but that kept on failing.
I need help please, I have no idea what is going on. I know a little about these things but not so much when it comes to MTK devices.
Can anyone help, If someone can do a lil step by step for me with links to what I would need, I would be very grateful.
There's loads of tut's on the web but all in Spanish with links to firmware for their networks.
Again...... Please and Thanks

Y5p DRA-LX9 problems installing GMS

I got this device from a friend to play with it. I tried every tutorial to install GMS on it, but without any success.
I could manage to install LZPLAY on it, but when I open it, I get an error box in chinese (something like the device is not supported).
I couldn't find any other method to install GMS without LZPLAY.
I am pretty upset about this problem and that the ONLY solution is this software. Previously (in the Android 2.2 era) any problem could be solved by rooting the device and installing a custom ROM.
Sadly, I see that this isn't an option anymore.
Did somebody manage to install somehow GMS on a Y5p? Are there any other methods to do that?
Any answers will be appreciated!
szilard1996 said:
I got this device from a friend to play with it. I tried every tutorial to install GMS on it, but without any success.
I could manage to install LZPLAY on it, but when I open it, I get an error box in chinese (something like the device is not supported).
I couldn't find any other method to install GMS without LZPLAY.
I am pretty upset about this problem and that the ONLY solution is this software. Previously (in the Android 2.2 era) any problem could be solved by rooting the device and installing a custom ROM.
Sadly, I see that this isn't an option anymore.
Did somebody manage to install somehow GMS on a Y5p? Are there any other methods to do that?
Any answers will be appreciated!
Click to expand...
Click to collapse
use new firmfinder to install 10.1.0.109 and then try lzplay
Huawei lover said:
use el nuevo firmfinder para instalar 10.1.0.109 y luego intente lzplay
Click to expand...
Click to collapse
te funciono ??
Hi, did anyone succeed with firmware downgrade to install Lzplay?
Before trying it myself
Thanks a lot!

Categories

Resources