Hi peeps, I've asked this in a couple of threads but the posts look a little dead.
I need help which i know the answer is out there somewhere but mostly in Spanish. Thats what it seems when it comes to the ZTE devices.
Ok so i rooted my L2 and put a custom recovery on that I first come across but never used before Carliv Touch 2.2.
I made a back up and then found a KK ROM. I installed the ROM but it didn't give me any UK network, so I used my back up and all was fine.
A couple of weeks later I done a stupid thing and completely wiped my device android along with it. I can still get in to the recovery but my backup says MD5 mismatch. I downloaded a custom ROM to my desktop and tried to sideload it in but that kept on failing.
I need help please, I have no idea what is going on. I know a little about these things but not so much when it comes to MTK devices.
Can anyone help, If someone can do a lil step by step for me with links to what I would need, I would be very grateful.
There's loads of tut's on the web but all in Spanish with links to firmware for their networks.
Again...... Please and Thanks
Related
Hey guys,
I got my Hero not to long ago and realized that it has no Marketplace. I worked out that this is because the device is from South East Asia and the marketplace is unavailable. I am running 2.73.728 (typo in the title)
How can I root my device and get the Marketplace? I've tried the Unlockr's method but when using Flashrec I get an error (Backup FAILED: Image is invalid.)
If someone could point me in the right direction, and perhaps explain how I could successfuly root my phone, it would be much appreciated.
I'm quite new to HTC and am unclear on how this all works.
Thanks guys.
You will need to downgrade to flash the recovery image
I have a South East Asian device as well, although mine is the Singaporean one which came with the Market app installed. The instructions here let me downgrade to 2.73.405.5, which let me root the phone.
I've since installed MoDaCo's custom ROM on there, but if you just want to run the stock software with root, those instructions are the way to go. (Of course, you can choose to flash any ROM after following them... it's entirely up to you.)
Thanks for that. Turned out that I just had to download the same ROM from the official site, install that, flashrec and follow the instructions.
I think the main problem was that it couldn't make a back up, and I wasn't going to root it without a backup.
Try to follow the instruction from below link
http://forum.xda-developers.com/showthread.php?t=572683
Hello everyone,
I'm new to Android as well, and just like Motleymoo I'm trying to root my Hero, but before that I want to backup my original before flashing. I read instructions on many forums out there and of course everything I could find here on XDA as well but so far no way. It seems this is due to later Build Number after 2.73.4... with further protections from HTC. Couldn't find anything to backup from this build before flashing so far. Any suggestions out there?
Btw, my device is SE Asia as well, bought in Hong Kong a week ago.
High_Flyer said:
Hello everyone,
I'm new to Android as well, and just like Motleymoo I'm trying to root my Hero, but before that I want to backup my original before flashing. I read instructions on many forums out there and of course everything I could find here on XDA as well but so far no way. It seems this is due to later Build Number after 2.73.4... with further protections from HTC. Couldn't find anything to backup from this build before flashing so far. Any suggestions out there?
Btw, my device is SE Asia as well, bought in Hong Kong a week ago.
Click to expand...
Click to collapse
Didn't you read the link posted above? Use the gold card method...
hi guys,
i got an optimus 7 with a demo rom, i've read on the Mozart section that the problem was solved by flashing another rom, is there anyone who can help me flash a full operating rom on this device pls??
thanks
First of...How did you get your hands on one. Secondly, why are you still keeping it? Thirdly, I have yet to get bootloader access on my Optimus 7 like you can with the HTC phones, and there are no dumps for the LG rom yet either.
I got one for free from a vendor who cant put it in the shop-window cuz too many criminals in that district.
I just have to "unlock" it and return to the vendor so he can use it like a normal phone.
Flash it..... the flash is simple and explained here... you can also choose the vendor you like more)))
http://forum.xda-developers.com/showthread.php?t=935578
I flashed mine yesterday (from Vodafone to TIM) and now works perfectly.... the procedure on that page have kind of lack of explanations, if you need any help I can explain you better the procedure, I am trying to post a more detailed one there but it's impossible for me because I have less that 10 posts... don't believe the guy that say he fried the phone, maybe he just made something wrong
Ok, whats up guys, First off, My name is Silver, and I come to you in dire need of help.
Before I start, this is concerning the device, The Huawei Ascend (M860).
Recently, we here at myascend(dot)org have all been stuck on Android 2.1, and recently IcarusMod came out, and everyone updated to that.
But upon looking farther, I came across an 2.2 update that was released in China for the C8600 (The China Version of the M860). We tested it, and BAM! it worked...but with 2 problems. The Data Service and Wi-Fi did not work. Phone Calls and Text worked fine, but no Data. One of the Developers was able to crack the thing open and Deodex it and load it using Clockwork v2.5.1.8 (Which is how we got the phone calls working)
Apparently there are no APNs
I started doing some research and I thought that maybe if i transfer some of the system files like APN-Configs.xml into the zip, it might work. But alas, I failed.
MY QUESTION IS...Would a developer be nice enough to take this signed Froyo port and possible help make the Data work and Wi-Fi work. Here is the download for the Froyo Update(C8600)
(Note: FLASH USING CLOCKWORK v2.5.1.8)
Apparently, I cant post outside links, so if you could, please go to the site MyAscend(dot)org and you'll find my forum post under Development...Thanks...
Wrong forum I think.
bump?? This plox?
Check the build.prop for something like:
"rild.libpath=/system/lib/libhtc_ril.so"
Data wont work if it's pointing to the wrong, or a non-existent, file (correct me if i'm wrong).
Check your working ROMs and see what file it's pointing to, it might be different in the Chinese version.
Not got a clue about wifi though i'm afraid.
Ill do that! thanks, Ill talk to my friend about developing it....meh, this is gonna be a long project
Hi Guys
i'm new here, so thanks a lot.
Soo the question, i've been here for 2 days, trying to find an answer to my problems.
A friend of mine gave a Huawei Y625-U51, but it had some problems with it.
The phone would reboot from nowhere, and always freezing, not having the correct hours, crashing everything, rebooting the inicial page.
I tried to update the Phone, my version is Y625-U43V100R001C464B103, tried by SD, the roms that i got ir, where older, or it dind't worked, then i tried from a post here to update from HQXA, had a tutorial and was kinda cheezy.
Some problems got away, but still the phone doesn't look 100%.
Could u give me heads up, where can i find roms to this, and how to do it?
I've tried here, but many of you, already knows this, and can't explain that well, to someone who doesn't get it easily.
Thanks in advance
Hello there. As always, I've got this weird thing for unpopular devices, and mostly breaking them.
This time it's about an Evolio X-Watch M ... or actually it is called Y1 (Yeah, it's another one of the Chinese Rebrands)
Anyway, many of the functions were broken from stock so I tried to install a few different firmwares on it. Most of them were acting weird but after a lot of work I managed to get my hands onto an Y1 firmware. Problem is that after flashing it my touchscreen stopped working.
Now, I guess my best chance would be to get my hand on the files needed to rebuild/build a MTK6261 firmware. So I was wondering if anyone around here could guide me around a bit since it's kinda hard to find stuff for MTK systems. Most of the things I found are mostly outdated.
Anyway, I was wondering if anyone could help me troubleshoot the touchscreen problem, or guide me around to the materials needed to cook my own MTK6261 firmware.
If you need more info please tell me and I'll try to provide anything I can.
Below you can find the files I used to install the firmware. It's mostly scatter-file stuff so I don't know it'll be much help to you. I was wondering if I could use those in any way to rebuild the firmware.
Help me!
ZeroTheScyther said:
Hello there. As always, I've got this weird thing for unpopular devices, and mostly breaking them.
This time it's about an Evolio X-Watch M ... or actually it is called Y1 (Yeah, it's another one of the Chinese Rebrands)
Anyway, many of the functions were broken from stock so I tried to install a few different firmwares on it. Most of them were acting weird but after a lot of work I managed to get my hands onto an Y1 firmware. Problem is that after flashing it my touchscreen stopped working.
Now, I guess my best chance would be to get my hand on the files needed to rebuild/build a MTK6261 firmware. So I was wondering if anyone around here could guide me around a bit since it's kinda hard to find stuff for MTK systems. Most of the things I found are mostly outdated.
Anyway, I was wondering if anyone could help me troubleshoot the touchscreen problem, or guide me around to the materials needed to cook my own MTK6261 firmware.
If you need more info please tell me and I'll try to provide anything I can.
Below you can find the files I used to install the firmware. It's mostly scatter-file stuff so I don't know it'll be much help to you. I was wondering if I could use those in any way to rebuild the firmware.
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------------------------------------------------
Please, doesn´t work in my Y1 smartwatch.
My version it´s a k10-cob.. and a MT6261. Do you have this version? I can´t find...
Thanks!