Hi Guys
i'm new here, so thanks a lot.
Soo the question, i've been here for 2 days, trying to find an answer to my problems.
A friend of mine gave a Huawei Y625-U51, but it had some problems with it.
The phone would reboot from nowhere, and always freezing, not having the correct hours, crashing everything, rebooting the inicial page.
I tried to update the Phone, my version is Y625-U43V100R001C464B103, tried by SD, the roms that i got ir, where older, or it dind't worked, then i tried from a post here to update from HQXA, had a tutorial and was kinda cheezy.
Some problems got away, but still the phone doesn't look 100%.
Could u give me heads up, where can i find roms to this, and how to do it?
I've tried here, but many of you, already knows this, and can't explain that well, to someone who doesn't get it easily.
Thanks in advance
Related
It seems like it doesn't show 64K colors anymore.
I tried to hard reset several time, but no luck.
it happend just like that, I didn't install anything new .
Anyone ? Anything ?
I have the latest firmware.
PLEASE !
thanks,
Numnum
no idea.
have you tried downgrading the firmware to a previous version?
sounds like you're a bit buggered mate.
Thanks...
No, I didn't downgrade it yet.
I will try to do it ...but I ahve been working with the new FW for 2 weeks or so ...
Do you have any clue where I can find the old Firmware ?
Thanks.
old firmware
if you hunt arround the forums there are usually a lot of different versions lurking. just make sure you read the entire thread so you know about any problems.
i'll admit i've never actually done a downgrade but i'm sure if you read the instructions carefully it'll be easy. i'm sure i've seen somewhere on here how to do it. its definately worth a try. i's the first thing i'd do if I had your problem.
good luck.
me again ...
Downgraded...no luck.
Upgraded again, same $hit.
I'll post photos of the problem soon .
thanks for yor advice.
ND.
oh well
sounds like it might be a hardware problem then. is your phone still under warranty?
If it is then I'd put the original software back on and get it sent back.
mm...
I bought it month ago from Cingular.
Should I contact Cingular ? HTC ?
Thanks,
N.
Ignore me, I misread it...
I just tride the romupdate DopodD800W on my MDA compact 111 T-Mobile en my little frend is dead as a rock!! no responce with activesync what so ever. It freezes at start. Please help me!!!
Put in bootloader and run the official T mOb update..it will b alive
how do I put it in bootloader?
Do a search on this forum!
I did and found it but still no connection what so ever so I can not install a new ROM.
monja72 said:
I did and found it but still no connection what so ever so I can not install a new ROM.
Click to expand...
Click to collapse
There are a lot similar messages in the forums at this site, all from people with bricked phones and waiting for a solution that is not here (yet). The easiest and quickest way to have your phone up and running again is to send it to either you provider or imei-check. But this will cost time and money. In the meantime, there are a lot of tips and tricks (not allways working though) in the various threads, you might give that a chance. What is the risk? I would say, there is not any, since your phone is allready dead and the warranty went out the window the moment you tried to flash another ROM.
I took the risk and went to the store and told them that my phone was dead after installing a program, they looked at it and just send it for repair, so far so good. hope it will come back alive. From now on no more risks!! thanks for your tips people!! Let you know when phone is back and fixed...
Hi guys
I am having my friends Artemis in my hand. I never used this phone. But because my friend knew that I am a member of XDA he has challenged me to solve this problem. I have been trying hard to really make it work but somehow or the other its just not working. I tried microsd way, official ROM way, radio upgrade way but its just not working. Its showing update 300 error on all such attempts. Here is the technical information.
ipl 3.07.0001
spl 1.11.0000
I think its CID unlocked but yet its not taking any ROM.
It just gets me greenblack screen other than the bootloader whenver I try to switch it on.
Would love to know why is it happening as soon as possible, or else it will be shame for me inspite of being member of such a smart community.
Looking forward...
hi all friends, i came to this forum after looking for solution to similar problem in my phone. i download a rom from another site - and tried updating after following proper process. but it is showing error 300. i have tried many times. but no result.
corepda you find any solution to the problem? which rom you tried to update? plz help me. the phone costed me a lot in islamabad. i don't want to lose it.
hi all friends, i came to this forum after looking for solution to similar problem in my phone. i download a rom from another site - and tried updating after following proper process. but it is showing error 300. i have tried many times. but no result.
corepda you find any solution to the problem? which rom you tried to update? plz help me. the phone costed me a lot in islamabad. i don't want to lose it.
Same is the case here, I am not so well versed with this old p series phones. I am still waiting for some solution to this grave problem. I took it to some technician but he said its motherboard problem which is something I am not convinced of.
I tried mtty being in bootloader but nothing happening. No support for the same problem is there anywhere. Looking forward to have someone with same problem experience.
Plz guyz this phone is dead,help us to make it alive. Cheers.
so sad. what we do now?
Actually my friend(my cousin) got this device from a scammer & I being the one who bought on this behalf has to make it right. It was just a few days old & here I am with this dead device.
I will disclose the name of that scammer so everyone at xda should beware from indulging in any transaction from him.
I got this deal from some other India forum.
Regards
Corepda
I had a similar problem before when my orbit locked during a flash, from my knowledge your only way to fix this is by using an sd card, I used the sd card method with my carriers wm5 rom.
Note i had some problems with the SD Card flash method at first until i eventually used an old 256mb card, try a few different ones, borrow a card if yo need to and remember not sdhc and format it fresh. I wish you luck
Since you guys can´t enter bootloader, u may have a brick, .
Have u tried to get in contact with the QMAT guys?
Maybe they know how to fix it.
http://revskills.de/index.html
Cheers.
please help im wishing to upgrade my offical rom from 1.43 to 1.48 but says my phone is not suitable??????im totally thick coming from nokia to windows,i did use search but was unable to find the answer.
thanks phil
Hello and welcome on board,
Can you post up the exact error message you are getting please?
Also read this thread...http://forum.xda-developers.com/showthread.php?t=609477 which you will fond useful and come back with any questions.
Incidentally you are not a fool for asking as long as you have searched first.
WB
hi mate thanks for the reply,when i go to the htc offical rom download,i'm asked to enter my serial number,which i do but says my device is not suitable and won't let me proceed any further??
cheers phil
got a major problem now ive tried to update to 1.48 but it crashed now i get a warning traingle on start up,and can go into bootloader screen and it says upgrade rom code error please try again???someone please help.i hope i havent bricked my phone
Is your HD2 branded? (bought it in combination with a contract?)
hi mate its on vodafone contract buts its not branded.
Hi again,
Have you tried to hard reset your phone to see if the old rom boots up again?
If it does not then you might want to reflash your existing rom onto your phone using the SD card method (look at the threads at the top of the Rom Development page to find what you are looking for).
If it works and you are still keen to upgrade the rom you need to read the threads on using either the Goldcard or HardSPL methods to upgrade.
Come back and let us know how you got on.
WB
hi mate i was having the exact same probs as the chap in the hd2 bricked thread,same messages etc and stopping at 9% i took there advice and reflashed the hpsl again which has worked a treat,i'm now a little dubious bout trying to upgrade as i don't fancy bricking it.
ive emailed htc to see why i cant upgrade from 1.43 to 1.48 seems odd it says my phone isnt suitable.
p.s thanks for the help mate much appreciated
OK, wait until you hear back from them. However if you are now up and running and have installed HardSPL, I think you will find that flashing a new radio on its own might help solve your problems.
I think if you look at the thread you were referring to (this one...http://forum.xda-developers.com/showthread.php?t=618084), IIRC, MysticGenius runs through a procedure for doing this that helped him sort out a similar problem.
Good luck with it.
WB
PS: Lesson learned here though is to read exhaustively on the topics on here BEFORE jumping in as fixing problems later can be both time consuming, if you are lucky, and a pain in the rear. As for that horrible sick feeling you get when you think you have bricked £500 worth of phone....wouldn't recommend it to my worst enemy!
WB
Hi peeps, I've asked this in a couple of threads but the posts look a little dead.
I need help which i know the answer is out there somewhere but mostly in Spanish. Thats what it seems when it comes to the ZTE devices.
Ok so i rooted my L2 and put a custom recovery on that I first come across but never used before Carliv Touch 2.2.
I made a back up and then found a KK ROM. I installed the ROM but it didn't give me any UK network, so I used my back up and all was fine.
A couple of weeks later I done a stupid thing and completely wiped my device android along with it. I can still get in to the recovery but my backup says MD5 mismatch. I downloaded a custom ROM to my desktop and tried to sideload it in but that kept on failing.
I need help please, I have no idea what is going on. I know a little about these things but not so much when it comes to MTK devices.
Can anyone help, If someone can do a lil step by step for me with links to what I would need, I would be very grateful.
There's loads of tut's on the web but all in Spanish with links to firmware for their networks.
Again...... Please and Thanks