Help, My 8125 Screen display 256 colors. - 8125, K-JAM, P4300, MDA Vario General

It seems like it doesn't show 64K colors anymore.
I tried to hard reset several time, but no luck.
it happend just like that, I didn't install anything new .
Anyone ? Anything ?
I have the latest firmware.
PLEASE !
thanks,
Numnum

no idea.
have you tried downgrading the firmware to a previous version?
sounds like you're a bit buggered mate.

Thanks...
No, I didn't downgrade it yet.
I will try to do it ...but I ahve been working with the new FW for 2 weeks or so ...
Do you have any clue where I can find the old Firmware ?
Thanks.

old firmware
if you hunt arround the forums there are usually a lot of different versions lurking. just make sure you read the entire thread so you know about any problems.
i'll admit i've never actually done a downgrade but i'm sure if you read the instructions carefully it'll be easy. i'm sure i've seen somewhere on here how to do it. its definately worth a try. i's the first thing i'd do if I had your problem.
good luck.

me again ...
Downgraded...no luck.
Upgraded again, same $hit.
I'll post photos of the problem soon .
thanks for yor advice.
ND.

oh well
sounds like it might be a hardware problem then. is your phone still under warranty?
If it is then I'd put the original software back on and get it sent back.

mm...
I bought it month ago from Cingular.
Should I contact Cingular ? HTC ?
Thanks,
N.

Ignore me, I misread it...

Related

Freezing problem

hi there, i was wondering if you can help me solve my problem. im new to the o2 xda mini s phone. i just got this phone and its been flashed to wm 6. it keeps on freezing when i try to log onto msn or move items frmo my pc to the wizard.
is there anyway to fix it or better of to downgrade to its proper version. please reply promptly. thanks TIA
do you need any info on the phone? ill be happy to provide you if u can help me out !
jst a thought
one reason that you phone is freezing basically is that the wizards motherboard is not made to handle the wm6. its just like installing windows xp into a very old computer, the whole system lags down.
there is a way to downgrade it if you are interest. jst let me know.
I and a couple hundred or more people on here would probably beg to differ you on that opinion. I've been using windows mobile 6 on mine since just after it came out and I can't say as I've ever had a hardware related issue because of it. There have been a few software issues here and there, but they've always been fixed by someone on here.
I would guess that you may have an issue with an older version of WM6 and would probably be easily fixed with a newer version that you can find in the WM6 area of the wizard section. Before you go flashing anything though, do some reading in the stickies in the WM6 section to make sure you're flashing a new ROM correctly. There are 2 different versions of a wizard, a G3 and a G4 and each has it's own way of flashing. If you flash it incorrectly you could end up ruining your phone.

*Urgent*Artemis Update 300 Error with no solution in sight*Urgent*

Hi guys
I am having my friends Artemis in my hand. I never used this phone. But because my friend knew that I am a member of XDA he has challenged me to solve this problem. I have been trying hard to really make it work but somehow or the other its just not working. I tried microsd way, official ROM way, radio upgrade way but its just not working. Its showing update 300 error on all such attempts. Here is the technical information.
ipl 3.07.0001
spl 1.11.0000
I think its CID unlocked but yet its not taking any ROM.
It just gets me greenblack screen other than the bootloader whenver I try to switch it on.
Would love to know why is it happening as soon as possible, or else it will be shame for me inspite of being member of such a smart community.
Looking forward...
hi all friends, i came to this forum after looking for solution to similar problem in my phone. i download a rom from another site - and tried updating after following proper process. but it is showing error 300. i have tried many times. but no result.
corepda you find any solution to the problem? which rom you tried to update? plz help me. the phone costed me a lot in islamabad. i don't want to lose it.
hi all friends, i came to this forum after looking for solution to similar problem in my phone. i download a rom from another site - and tried updating after following proper process. but it is showing error 300. i have tried many times. but no result.
corepda you find any solution to the problem? which rom you tried to update? plz help me. the phone costed me a lot in islamabad. i don't want to lose it.
Same is the case here, I am not so well versed with this old p series phones. I am still waiting for some solution to this grave problem. I took it to some technician but he said its motherboard problem which is something I am not convinced of.
I tried mtty being in bootloader but nothing happening. No support for the same problem is there anywhere. Looking forward to have someone with same problem experience.
Plz guyz this phone is dead,help us to make it alive. Cheers.
so sad. what we do now?
Actually my friend(my cousin) got this device from a scammer & I being the one who bought on this behalf has to make it right. It was just a few days old & here I am with this dead device.
I will disclose the name of that scammer so everyone at xda should beware from indulging in any transaction from him.
I got this deal from some other India forum.
Regards
Corepda
I had a similar problem before when my orbit locked during a flash, from my knowledge your only way to fix this is by using an sd card, I used the sd card method with my carriers wm5 rom.
Note i had some problems with the SD Card flash method at first until i eventually used an old 256mb card, try a few different ones, borrow a card if yo need to and remember not sdhc and format it fresh. I wish you luck
Since you guys can´t enter bootloader, u may have a brick, .
Have u tried to get in contact with the QMAT guys?
Maybe they know how to fix it.
http://revskills.de/index.html
Cheers.

please help total thicko

please help im wishing to upgrade my offical rom from 1.43 to 1.48 but says my phone is not suitable??????im totally thick coming from nokia to windows,i did use search but was unable to find the answer.
thanks phil
Hello and welcome on board,
Can you post up the exact error message you are getting please?
Also read this thread...http://forum.xda-developers.com/showthread.php?t=609477 which you will fond useful and come back with any questions.
Incidentally you are not a fool for asking as long as you have searched first.
WB
hi mate thanks for the reply,when i go to the htc offical rom download,i'm asked to enter my serial number,which i do but says my device is not suitable and won't let me proceed any further??
cheers phil
got a major problem now ive tried to update to 1.48 but it crashed now i get a warning traingle on start up,and can go into bootloader screen and it says upgrade rom code error please try again???someone please help.i hope i havent bricked my phone
Is your HD2 branded? (bought it in combination with a contract?)
hi mate its on vodafone contract buts its not branded.
Hi again,
Have you tried to hard reset your phone to see if the old rom boots up again?
If it does not then you might want to reflash your existing rom onto your phone using the SD card method (look at the threads at the top of the Rom Development page to find what you are looking for).
If it works and you are still keen to upgrade the rom you need to read the threads on using either the Goldcard or HardSPL methods to upgrade.
Come back and let us know how you got on.
WB
hi mate i was having the exact same probs as the chap in the hd2 bricked thread,same messages etc and stopping at 9% i took there advice and reflashed the hpsl again which has worked a treat,i'm now a little dubious bout trying to upgrade as i don't fancy bricking it.
ive emailed htc to see why i cant upgrade from 1.43 to 1.48 seems odd it says my phone isnt suitable.
p.s thanks for the help mate much appreciated
OK, wait until you hear back from them. However if you are now up and running and have installed HardSPL, I think you will find that flashing a new radio on its own might help solve your problems.
I think if you look at the thread you were referring to (this one...http://forum.xda-developers.com/showthread.php?t=618084), IIRC, MysticGenius runs through a procedure for doing this that helped him sort out a similar problem.
Good luck with it.
WB
PS: Lesson learned here though is to read exhaustively on the topics on here BEFORE jumping in as fixing problems later can be both time consuming, if you are lucky, and a pain in the rear. As for that horrible sick feeling you get when you think you have bricked £500 worth of phone....wouldn't recommend it to my worst enemy!
WB

Android 5.0.2 update problem

Hi Guys ! Ireally hope you can help me !!! I purchased a lg g2 d802 on a website in germany (where i live). I updated my phone to lolipop. the update process finished without problem. now when i turned the phone on and wanted to use it, the touch screen was not properly working making the phone unusable. i processed a hard reset with the power and volume buttons but it didn t fix the problem. I messaged lg germany, with the imei number they found out that the phone is actually a version for the asian market, thing that i didn t know when i purchased the phone. i tried to get in touch with the website that sold me the phone but i can't. i don t get any answer from them. I guess the problem with the phone is that it was not made to work with the european lolipop update. does any one know, how i could fix that ? i am still a beginner with android. But i can understand technical stuffs quiet good.
ultimat971 said:
Hi Guys ! Ireally hope you can help me !!! I purchased a lg g2 d802 on a website in germany (where i live). I updated my phone to lolipop. the update process finished without problem. now when i turned the phone on and wanted to use it, the touch screen was not properly working making the phone unusable. i processed a hard reset with the power and volume buttons but it didn t fix the problem. I messaged lg germany, with the imei number they found out that the phone is actually a version for the asian market, thing that i didn t know when i purchased the phone. i tried to get in touch with the website that sold me the phone but i can't. i don t get any answer from them. I guess the problem with the phone is that it was not made to work with the european lolipop update. does any one know, how i could fix that ? i am still a beginner with android. But i can understand technical stuffs quiet good.
Click to expand...
Click to collapse
you need to open the phone and look at motherborad to be 100% sure about wich model/variant you have d802/d800/ls980 ect.
read the entire thread here. theres a video on how to.
http://forum.xda-developers.com/lg-g2/general/warning-to-people-bought-phones-ebay-t2991195
raptorddd said:
you need to open the phone and look at motherborad to be 100% sure about wich model/variant you have d802/d800/ls980 ect.
read the entire thread here. theres a video on how to.
http://forum.xda-developers.com/lg-g2/general/warning-to-people-bought-phones-ebay-t2991195
Click to expand...
Click to collapse
Thanks Buddy,
I followed the last tipp of the publisher of the thread you forwarded to me and try to get my money back. It turned up that the Company who sold me the phone finally answered after i reported them to paypal. And now we found a solution to the problem.
Thanks a lot for your help still. I appreciate it.
ultimat971 said:
Thanks Buddy,
I followed the last tipp of the publisher of the thread you forwarded to me and try to get my money back. It turned up that the Company who sold me the phone finally answered after i reported them to paypal. And now we found a solution to the problem.
Thanks a lot for your help still. I appreciate it.
Click to expand...
Click to collapse
you welcomed, you could use that phone just had to flash the correct variant. unless you wanted what you pay for
raptorddd said:
you welcomed, you could use that phone just had to flash the correct variant. unless you wanted what you pay for
Click to expand...
Click to collapse
Yeah exactly ! I don't like to be cheated out
ok, i have another question : now i got another lg g2 on android 4.4.2, it was working perfectly, this time i made sure that it was an european variant before i process any update then i did update the phone and i had exactly the same problem like i had with the other phone. after the update is completed, the phone has touch screen problem. i read a lot of infos on internet and learned how to flash firmwares. i first flash my lg to android 5.0.2, it succeeded but still this screen problem, then i flashed it back to android 4.4.2 and still have this touch screen problem. i wonder now if it s not because i use windows 10 !!! could it be ??
ultimat971 said:
ok, i have another question : now i got another lg g2 on android 4.4.2, it was working perfectly, this time i made sure that it was an european variant before i process any update then i did update the phone and i had exactly the same problem like i had with the other phone. after the update is completed, the phone has touch screen problem. i read a lot of infos on internet and learned how to flash firmwares. i first flash my lg to android 5.0.2, it succeeded but still this screen problem, then i flashed it back to android 4.4.2 and still have this touch screen problem. i wonder now if it s not because i use windows 10 !!! could it be ??
Click to expand...
Click to collapse
am not sure and i dont think it matters . since i dont kow much about KK post this in the help thread in general.

Huawei Y625-u51 rom firmware what?

Hi Guys
i'm new here, so thanks a lot.
Soo the question, i've been here for 2 days, trying to find an answer to my problems.
A friend of mine gave a Huawei Y625-U51, but it had some problems with it.
The phone would reboot from nowhere, and always freezing, not having the correct hours, crashing everything, rebooting the inicial page.
I tried to update the Phone, my version is Y625-U43V100R001C464B103, tried by SD, the roms that i got ir, where older, or it dind't worked, then i tried from a post here to update from HQXA, had a tutorial and was kinda cheezy.
Some problems got away, but still the phone doesn't look 100%.
Could u give me heads up, where can i find roms to this, and how to do it?
I've tried here, but many of you, already knows this, and can't explain that well, to someone who doesn't get it easily.
Thanks in advance

Categories

Resources