What happens is that I format my moto e4 and start in the boot loop and from there I do not pass, moving it to the mobile enter this code dd if = / dev / zero of = / dev / block / platform / msm_sdcc. 1 / name / recovery by mistake and now my phone only turns on the Motorola screen and then it shuts down and repeats itself and does not let me get into the recovery I can do?
Download the original stock firmware and flash it using the scatter file and SP flash tools
Related
Dear Readers,
I recently bought my Samsung Galaxy A5 2016 and its an excellent phone, although, I rooted it quite soon after purchase.
Used CF-Autoroot and everything worked just fine,
Now today I wanted to get Xposed up and running on my phone, and I wanted to back up everything first.
I installed Flashify and downloaded a TWRP img, I flashed it and rebooted my phone.
Heres some info now:
Normal boot: Kernel is not seandroid enforcing
What comes next: Bootloaded exception
[RST_STAT = 0x10000]
ASV TBL VER = 32768
LOT_ID = N469X
-Some useless CPU heat info etc-
Exception: do_handler_sync: UNKNOWN
pc : 0x40205000 l r : 0x43e07c68 sp:"0x43f07f40
Now after that I shut down with vol down+main menu+power button
And I boot again with vol up+main menu+power button
First comes up:
Installing system update...
Then:
On the bottom of the screen: dm-verity verification failed. . .
And ofcourse in the middle the basic options
On the top
Android System Recovery <e3>
PLEASE help me out cause I really dont know what to do now..
Greetings from The Netherlands
Edit: I get different text on the first normal boot every time it seems, some weird letters and numbers etc.
Example: B f $ AFA G $ AFB p G @F H1 G pl
Edit2: I cannot acces download mode and factory reset doesnt work.
You try to run the manufacturer's software with Samsung's Kies3 then follow the ROOT and install TWRP back through Odin Dowload mode Mode.
1-Phone Reciving 06/April/2017 after unboxing power on and update 8.1.2 stable rom finish update >lost imei phone
2-You are using program (Maui META ver 9.1604.02.00) after finish edit Imei phone is dead >>>show mi logo and restart
3-i did something flash via sp flash version (5.1636 / 5.1708 / 5.1648 / 5.1632 / 5.1620) stable rom and dev rom
still finished wait 10-15 minute i am running phone >show logo and restart (boot-loop) .
4-Now Xiaomi Sent me Code Unlock Bootloader But, its failed. Due to this message
current account is different from the account info on the device . "
5-used mi unlock other version (2.2.406.5_2 / 1.0.1225.2 / 1.1.0317.1 / 1.1.1111.11231 )
and download latest firmware used sp flash ( stable / dev) download only / format all+ download / upgrade only)
justmpm
eagleeyetom
gregbradley
engloa
kwoktopus
Art Vanderlay
v7
What should i do now bro>?
Hi,
I tried to install custom rom from site LineageOS from below site but failed to install due to some error.
www . lineage osrom . com/ 2017/01 /download-lineage- os-for-coolpad .html
(Remove spaces)
After failed to install custom rom, I have restore my phone as I took backup of User data.
After restoring data, I found that It's looping in recovery mode only after restarting it.
I tried to format with dalvik cache clear and restore user data but not working
also tried to install "360 OS" but android still boot loop in recovery mode only.
Plz help me to get back my phone as it was before or with Lineage OS or any other rom.
Information :
- TWRP version is 2.8.7.0
- After click on power button, Coolpad logo showing and below logo it is showing "=> RECOVERY MODE..."
- Power-up button working properly, No issue of buttons.
(Some Screenshot attached for reference)
Img 1 : drive . goo gle.com/ open?id= 0B0yo9L8bqU4lWXBabFBlMnZzcWc
Img 2 : drive . goo gle.com/ open?id= 0B0yo9L8bqU4lNHJIM2J2N19RbmM
Img 3 : drive . goo gle.com/ open?id= 0B0yo9L8bqU4lN3pjd1ZVSEVFdlU
(Remove spaces)
Download and Install Stock Marshmallow with SP Flash tool , or extract it and get System.img and boot.img and flash them using TWRP
Earlier it was running on custom rom then i tried to install stock rom on my device moto g4 plus...nd i successfully installed it....later an update came and as soon as phone dowoaded update nd gone to reboot doesn't turn on after that...nothing of the screen ..only charging led blinking .....nd today i tried to do blankflash nd it was successful nd something showed up on the screen for the first time
it has these options :
start
restart bootloader
recovery mode
power off
factory
barcodes
bp tools
qcom
bootloader logs
switch tools mode
when i select recovery mode..it shows up this:
------------------------------------------------------------------
Startup failed :
your device didnt start up succesfully.
use the software repair assistant on computer to repair your device.
Ap Fastboot Mode(secure)
Fastboot Reason: Failed to intialise storage partition table
ERROR : No bootaimage found . skip to fastboot
boot up failed.
---------------------------------------------------------------------
please help me through this...i want to install stock android on my phone
Try this guide https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Your device's memory seems to be corrupted, so it doesn't recognize a recovery being present. As pointed out above, go back to Fastboot, and install the latest stock ROM.
BOOT LOGO FOR A5 & A7 ALL VARIENTS!
I AM NOT RESPONSIBLE FOR BRICKED DEVICES OR DESTROYED SD CARDS WHEN FLASHING THIS BOOTLOADER MODIFICATION!
Flash the A5 All Folder Files if your device is a A5 2017 Any Varient
Flash the A7 All Folder Files if your device is a A7 2017 Any Varient
Installation
Make sure you have a UNLOCKED bootloader
Make sure you have installed TWRP
Flash the ZIP File in TWRP
Reboot to System
Downloads
Mega : https://mega.nz/folder/nPJ0HKYJ#twsEO1FB00549wvAyhuY6A
Folder Status
Green = Tested
Blue = Untested
Custom Requests? Join Our Telegram!
https://t.me/splashaseries2017
How to revert to previous boot logo?
Flash the Uninstall ZIP to revert back to the original bootlogo. If your bootlogo looks different this was built on a newer version
of your current bootloader. This is normal.
My Device is bricked, What do i do now!?!?
Calm Down, We've done a lot of testing your device is not permanantly bricked!
Install Odin
Boot into Download Mode (Even if screen is black)
Flash your BL File into the BL slot in Odin
Reboot and Fixed!
Report the Error in this Thread!
Credits
Splashs By : Tek Xylo
Boot Logo Changer By : Aquib132
Preview Picture & Testing By : Lucas Bergia
Mega links empty
why MEGA links are empty?