recovery mode error in moto g4 plus - Moto G4 Plus Questions & Answers

Earlier it was running on custom rom then i tried to install stock rom on my device moto g4 plus...nd i successfully installed it....later an update came and as soon as phone dowoaded update nd gone to reboot doesn't turn on after that...nothing of the screen ..only charging led blinking .....nd today i tried to do blankflash nd it was successful nd something showed up on the screen for the first time
it has these options :
start
restart bootloader
recovery mode
power off
factory
barcodes
bp tools
qcom
bootloader logs
switch tools mode
when i select recovery mode..it shows up this:
------------------------------------------------------------------
Startup failed :
your device didnt start up succesfully.
use the software repair assistant on computer to repair your device.
Ap Fastboot Mode(secure)
Fastboot Reason: Failed to intialise storage partition table
ERROR : No bootaimage found . skip to fastboot
boot up failed.
---------------------------------------------------------------------
please help me through this...i want to install stock android on my phone

Try this guide https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138

Your device's memory seems to be corrupted, so it doesn't recognize a recovery being present. As pointed out above, go back to Fastboot, and install the latest stock ROM.

Related

[Q] Lg G2 Brick Security Error Bootloop No recovery, No download, PC don't recognize

Hello everyone !
I have big troubles with my Lg g2 d802.
Yesterday i want to intall crdroid 5.0 on my Lg g2 on Official 4.4.2, so i've:
Root my phone
Install CWM Manager
Set CWM Recovery
Reboot in recovery
Use ADB Mode
Use ADB on my PC to send crDroid zip by sideload
During sideload, after full download, there was an error assert failed. So installation failed, and i've decided to reboot my phone.
Problem is here, my phone boot, display LG Logo and after 5 seconds, Lg Logo with "security error" message, then stop alone and reboot again, and again.
I have tried following procedures :
Power off completely my phone and then Volume down+PWR to enter in recovery : FAIL
Volume Up and then put USB cable to enter download mode : FAIL
Connect with USB on Ubuntu to try to reset .img files : FAIL (Phone invisible on my pc, even not recognize)
So i cannot go to Recovery Mode, Download Mode and my phone isn't recognize on PC.
I don't have any other ideas and i am here to asking help .
Thxs for reading, and i pray for a miracle !
Wallouf said:
Hello everyone !
I have big troubles with my Lg g2 d802.
Yesterday i want to intall crdroid 5.0 on my Lg g2 on Official 4.4.2, so i've:
Root my phone
Install CWM Manager
Set CWM Recovery
Reboot in recovery
Use ADB Mode
Use ADB on my PC to send crDroid zip by sideload
During sideload, after full download, there was an error assert failed. So installation failed, and i've decided to reboot my phone.
Problem is here, my phone boot, display LG Logo and after 5 seconds, Lg Logo with "security error" message, then stop alone and reboot again, and again.
I have tried following procedures :
Power off completely my phone and then Volume down+PWR to enter in recovery : FAIL
Volume Up and then put USB cable to enter download mode : FAIL
Connect with USB on Ubuntu to try to reset .img files : FAIL (Phone invisible on my pc, even not recognize)
So i cannot go to Recovery Mode, Download Mode and my phone isn't recognize on PC.
I don't have any other ideas and i am here to asking help .
Thxs for reading, and i pray for a miracle !
Click to expand...
Click to collapse
Even I have suffered with same problem
Follow this thread I think you must have seen this thread it is the best solution till date from recovering the problem you are in right now.
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
But you have to mess up with your phone motherboard but its really very easy. Just follow it. I have recovered mine from this.
Ok i'll Try it ! Thx you !
I have tried your link and its working. My phone is alive ! Thx you .
I have a last problem. My phone has 2 black lines on the screen from top to bottom. This appear after i had flash new .img files. Does anyone have an idea about what i need to do to remove these ?
Thx you again

Help with rooting G906S Marshmallow 6.0.1 (tried CFire, TWRP and kingroot)

Hi, I've just recently switched over from iphone to android so I'm still new to the whole system. Anyway I've been trying to root my phone for the past 2 days to no avail so I'm at my wits end here. Before I start my phone is from korea which I don't know if whether or not impacts its ability to be rooted, I've done all the basics like enable USB debugging from dev mode, install samsung usb drivers, open ODIN in admin mode and allow MTP to computer. My Device details are below:
>Baseband version : G906SKSU1CPF1
>KERNEL : 3.10.40-8533426
>BUILD NUMBER : MMB29M.G906SKSU1CPF3
So anyway I first tried flashing using CF autoroot for sm-G906S with odin which while it said it was passed and was successful on pc it would be stuck on the samsung logo with a message at the top left that said :
>Recovery booting
>Recovery is not seandroid enforcing
>set warranty bit recovery
So then I tried flashing TWRP custom recovery and putting Super user zip in the internal storage which although got my phone back to working order still wouldnt let me root as the process required me to go to recovery mode from the fastboot mode after it was done flashing (I tried both with and without autoreboot), however once the flashing was done on fastboot I couldn't get to recovery mode no matter how long I held the Vol up/power/home button combination and when i tried it after rebooting it would show normal recovery mode hence there was no way to install the Super User. (Also attempted this with phils recovery)
I then tried to do the TWRP method using adb with command prompt however it would get stuck saying waiting for device when i tried to flash and needless to say kingroot also failed.
At this point as far I've gone through all the methods I could find for my particular device. Would greatly appreciate any insight or advice regarding this problem.
Thanks
start reading from here http://forum.xda-developers.com/gal...ner-thread-t2807639/post68725608#post68725608

[bricked][help] bricked nokia

so this is status of my device
bootloader ...locked
recovery....ok
fastboot mode .....ok
so i tried two options make ota zips and flash them via stock recovery (i coded update script and signed it but it says verfication failed ).
and i tried all fastboot options.
i tried flashing with ost.
i tried QFIL but it dosent recognize my devize .
edl cable just boots device in download mode,

QHUSB_BULK mode HELP..HELP

I had NOKIA 5 with latest pie update installed
I wanted to flash nokoa 6 ta-1021 rom in it
(I have also successfully installed ta-1000 CN rom in it)
But this this after flashing any older ota update (Dec.2017) I tried to flash with NOST
Although I have unlocked bootloader
But NOST or OST didn't flash and gave an error
Now NOST give me a message that my device is D1C and I am going to flash PLE so confirm it and all data will be erased
Now I confirmed it and it gave me a error of low battery voltage
Now I just boot the phone in recovery mode and power it off so that the phone can get charged
But now it's showing QHSB_BULK in PC
But I just launched NOST and hold the power button
Now my phone is in download mode(thanks to NOST)
BUT the problem is that PC is showing adb interface when the 0hone is in download mode and only adb commands are working
So I typed adb reboot recovery
So I booted in recovery successfully
Now from here I again went in bootloader mode
Now I tried to flash Nokia 5 (ND1) Firmware ,But NOST OR OST both gave an error
I tried ta-1000CN Firmware it also gave an error
Then I tried to flash PLE firmware which I was trying to flash before the phone went in qhsb bulk mode
Now same thing happened when I tried to flash ta-1000 CN firmware
1st-the phone went in qhsb bulk mode because I power off the phone after getting an error
2nd-then using NOST I booted my phone in download mode
Then NOST could only flash ta-1000 model ROMs
So what is it.WHY DOES NOST CAN ONLY FLASH THOSE ROMS WHICH BRICKED MY PHONE A MINUTE EARLY??
AND NOT THE STOCK ONE??
and one thing now I can changed it to Nokia 5 by just flashing any Nokia 5 ota update through applying upadte from sdcard which I downloaded from xda
And now my phone doesn't show POWER BY ANDROID logo while booting
It only shows NOKIA logo
And it doesn't show battery charging icon when the phone is switched off
Other things are working fine(TWRP,magisk)
Except fingerprint data which get lost after flashing any module .
Please read it I know it's very lengthy but suggest me what should I do
Thanks

Zenfone 3 Brick

I was using Lineage OS on my Asus Zenfone 3 (ZE552KL). When my battery was empty it's stucks on fastboot mode. Got stuck unlocking my bootloader via adb. Phone is detecting in ADB. The phone is getting stuck at ASUS logo and I cant boot to recovery either. It does get detected by fastboot but nothing more. I have tried :-
(1) It only seems unlocked boot screen and the choices is start volume up countinue boot but isn't any happening.
(2) I used Asus flashtool (various versions- 1.0.45). The latest one says battery is -1% while the earlier version returns various errors including "ftp request server log access is denied" and "failed to write partition".
(3) I have (seemingly) couldn't recovery and boot images.
(4) I flash factory RAW rom, and then Stock Rom but It's stuck on Fastboot Mode.
Read a lot of threads but not much seems to be working.
Help please !
Thanks
1st Try to Flash with latest RAW,
If fail, Try with CSC
If still fail try with EDL File (Unbrick) - ZE552KL Libra_QFIL_8953_01020_20170714_Aboot.7z
eemmiirr said:
I was using Lineage OS on my Asus Zenfone 3 (ZE552KL). When my battery was empty it's stucks on fastboot mode. Got stuck unlocking my bootloader via adb. Phone is detecting in ADB. The phone is getting stuck at ASUS logo and I cant boot to recovery either. It does get detected by fastboot but nothing more. I have tried :-
(1) It only seems unlocked boot screen and the choices is start volume up countinue boot but isn't any happening.
(2) I used Asus flashtool (various versions- 1.0.45). The latest one says battery is -1% while the earlier version returns various errors including "ftp request server log access is denied" and "failed to write partition".
(3) I have (seemingly) couldn't recovery and boot images.
(4) I flash factory RAW rom, and then Stock Rom but It's stuck on Fastboot Mode.
Read a lot of threads but not much seems to be working.
Help please !
Thanks
Click to expand...
Click to collapse
I have this problem too. How did you fix it ?

Resources