I had NOKIA 5 with latest pie update installed
I wanted to flash nokoa 6 ta-1021 rom in it
(I have also successfully installed ta-1000 CN rom in it)
But this this after flashing any older ota update (Dec.2017) I tried to flash with NOST
Although I have unlocked bootloader
But NOST or OST didn't flash and gave an error
Now NOST give me a message that my device is D1C and I am going to flash PLE so confirm it and all data will be erased
Now I confirmed it and it gave me a error of low battery voltage
Now I just boot the phone in recovery mode and power it off so that the phone can get charged
But now it's showing QHSB_BULK in PC
But I just launched NOST and hold the power button
Now my phone is in download mode(thanks to NOST)
BUT the problem is that PC is showing adb interface when the 0hone is in download mode and only adb commands are working
So I typed adb reboot recovery
So I booted in recovery successfully
Now from here I again went in bootloader mode
Now I tried to flash Nokia 5 (ND1) Firmware ,But NOST OR OST both gave an error
I tried ta-1000CN Firmware it also gave an error
Then I tried to flash PLE firmware which I was trying to flash before the phone went in qhsb bulk mode
Now same thing happened when I tried to flash ta-1000 CN firmware
1st-the phone went in qhsb bulk mode because I power off the phone after getting an error
2nd-then using NOST I booted my phone in download mode
Then NOST could only flash ta-1000 model ROMs
So what is it.WHY DOES NOST CAN ONLY FLASH THOSE ROMS WHICH BRICKED MY PHONE A MINUTE EARLY??
AND NOT THE STOCK ONE??
and one thing now I can changed it to Nokia 5 by just flashing any Nokia 5 ota update through applying upadte from sdcard which I downloaded from xda
And now my phone doesn't show POWER BY ANDROID logo while booting
It only shows NOKIA logo
And it doesn't show battery charging icon when the phone is switched off
Other things are working fine(TWRP,magisk)
Except fingerprint data which get lost after flashing any module .
Please read it I know it's very lengthy but suggest me what should I do
Thanks
Related
Hi i was updating my phone from Android 2.1 V20A to V20C
update finished when the phone reboots i got the error msg saying
Arm11 crashed
So tried to flash with emergency and cs_emergency mode but i am getting a error phone not found because of that flash process could not continue further..
try taking the battery out, sim card and memory card and flash it with all that out
@ eoghan2t7 : Thaks for ur response
I booted my phone to downloadmode (pressing Vol down + Power) then flashed using KDZ updater.. and now working
But the KDZ file which i used was ROM with FASTBOOT but i didnt tried with Orginal LG ROM. So i will check later and update here
Thanks
Guys,my phone shows Arm 11 crashed again on 2.1 without fastboot.
I go to the download mode and on kdz updater load kdz file and type on EMERGENCY,DIAG,CS_EMERGENCY and its say THE PHONE NOT FOUND!!!
How to fix this??
I tried to put Europe Open+Fastboot rom and its say again THE PHONE NOT FOUND!!!
EDIT:I fix it
today i want to share my sad story with u guys , i got my phone huawe mla-al10 , i flash custom rom lineage os 13.1 from xda for huawei can-11 then it got bootloop , before this i succesfully install it without bootloop , so i decide to reset , then i go to the recovery , idk how my recovery become the stock one ,then i click format data , suddenly its stuck at 61% then keep reboot , i open fastboot then get frp locked , im start panic , then i do a research how to get rid frp locked , they said relock the bootloader , then i relock booatlader , haa its getting more worse , now icant even go to fastboot or update mood , its only goes to factory reset lowlevel.... then screen becomes black with blue led , i connect to pc , i found hs-usb diagnostic 9006 ( com 3 ) thats mean i can unbrick only with 1 way , with Snapdragoon flashtool , but i cant find nowhere for the firmware that make to unbrick using flashtool for my devices , hmmm im so sad right now , is there any way i can make my own flashtool file for snapdragon flashtool ? i hope i can fix this as soon as possible
If ADB is working,just flash your original (firmware) RECOVERY,BOOT and SYSTEM.img from the update.app zip file...after flashing those 3 img file,just reboot via adb...fastboot reboot
Phone should be like new
virusdunil said:
If ADB is working,just flash your original (firmware) RECOVERY,BOOT and SYSTEM.img from the update.app zip file...after flashing those 3 img file,just reboot via adb...fastboot reboot
Phone should be like new
Click to expand...
Click to collapse
to make adb working i need to enable usb debugging bla4 but my phone is totally dead , no fastboot nothing i can do except go to edl modee
shazlieyazizan1 said:
to make adb working i need to enable usb debugging bla4 but my phone is totally dead , no fastboot nothing i can do except go to edl modee
Click to expand...
Click to collapse
same problem adb is also not working did you find any solution?
I am having a problem i didnt do anything with my phone its huawei nova plus just 1 or 2 day ago open the boxed and try to update it using firmware finder app after downloading the full ota phone automatically restart and stuck on installing update 5% and its still on boot loop am not able to flash any firmware using sd card or update.app just because it always failed on 5 % even though am not able to wipe factory/reset it also failing. Can you guys please help me? to solve the problem?
abuapka said:
same problem adb is also not working did you find any solution?
I am having a problem i didnt do anything with my phone its huawei nova plus just 1 or 2 day ago open the boxed and try to update it using firmware finder app after downloading the full ota phone automatically restart and stuck on installing update 5% and its still on boot loop am not able to flash any firmware using sd card or update.app just because it always failed on 5 % even though am not able to wipe factory/reset it also failing. Can you guys please help me? to solve the problem?
Click to expand...
Click to collapse
try get correct model from huawei updater finder ..
if dload method not work then try to go to fastboot mode by tgis way >> Turn off your mobile and just click and hold on DOWN vol then connect it with usb it should work !
Earlier it was running on custom rom then i tried to install stock rom on my device moto g4 plus...nd i successfully installed it....later an update came and as soon as phone dowoaded update nd gone to reboot doesn't turn on after that...nothing of the screen ..only charging led blinking .....nd today i tried to do blankflash nd it was successful nd something showed up on the screen for the first time
it has these options :
start
restart bootloader
recovery mode
power off
factory
barcodes
bp tools
qcom
bootloader logs
switch tools mode
when i select recovery mode..it shows up this:
------------------------------------------------------------------
Startup failed :
your device didnt start up succesfully.
use the software repair assistant on computer to repair your device.
Ap Fastboot Mode(secure)
Fastboot Reason: Failed to intialise storage partition table
ERROR : No bootaimage found . skip to fastboot
boot up failed.
---------------------------------------------------------------------
please help me through this...i want to install stock android on my phone
Try this guide https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Your device's memory seems to be corrupted, so it doesn't recognize a recovery being present. As pointed out above, go back to Fastboot, and install the latest stock ROM.
I tried to root android 8.1, then it came up with a error message on startup saying:
This device has loaded a different operating system
ID: (serial number)
This device will shut down in 30 seconds
and it also has an unlock icon.
But I managed to boot to TWRP and I tried flashing the ota itself but it still wouldn't work so I flashed the Nougat OTA and it now boots to recovery instead of the error message. Now I tried to sideload the OTA but it will come up with the error " failed to read command: No error"
By the way I did try OST LA but it was stuck on checking device status.
Use OST LA version 6.0.4. That works. If I understood correctly, you flashed official ROM and OTA through TWRP. You can't do it. ROMs are installed only through OST and OTAs only through official recovery (which TWRP isn't)
Benderisas said:
Use OST LA version 6.0.4. That works. If I understood correctly, you flashed official ROM and OTA through TWRP. You can't do it. ROMs are installed only through OST and OTAs only through official recovery (which TWRP isn't)
Click to expand...
Click to collapse
Thanks a lot, now my phone is working after flashing nougat with OST LA 6.0.4 instead of 6.1.2. Now my phone will probably explode with notifications .
nintendobuster420 said:
I tried to root android 8.1, then it came up with a error message on startup saying:
This device has loaded a different operating system
ID: (serial number)
This device will shut down in 30 seconds
and it also has an unlock icon.
But I managed to boot to TWRP and I tried flashing the ota itself but it still wouldn't work so I flashed the Nougat OTA and it now boots to recovery instead of the error message. Now I tried to sideload the OTA but it will come up with the error " failed to read command: No error"
By the way I did try OST LA but it was stuck on checking device status.
Click to expand...
Click to collapse
hi
can i ask how did u flash while theres no download mode working
hammohammo said:
hi
can i ask how did u flash while theres no download mode working
Click to expand...
Click to collapse
download mode did work i just held the power button and volume down and it booted up into download mode
I had NOKIA 5 with latest pie update installed
I wanted to flash nokoa 6 ta-1021 rom in it
(I have also successfully installed ta-1000 CN rom in it)
But this this after flashing any older ota update (Dec.2017) I tried to flash with NOST
Although I have unlocked bootloader
But NOST or OST didn't flash and gave an error
Now NOST give me a message that my device is D1C and I am going to flash PLE so confirm it and all data will be erased
Now I confirmed it and it gave me a error of low battery voltage
Now I just boot the phone in recovery mode and power it off so that the phone can get charged
But now it's showing QHSB_BULK in PC
But I just launched NOST and hold the power button
Now my phone is in download mode(thanks to NOST)
BUT the problem is that PC is showing adb interface when the 0hone is in download mode and only adb commands are working
So I typed adb reboot recovery
So I booted in recovery successfully
Now from here I again went in bootloader mode
Now I tried to flash Nokia 5 (ND1) Firmware ,But NOST OR OST both gave an error
I tried ta-1000CN Firmware it also gave an error
Then I tried to flash PLE firmware which I was trying to flash before the phone went in qhsb bulk mode
Now same thing happened when I tried to flash ta-1000 CN firmware
1st-the phone went in qhsb bulk mode because I power off the phone after getting an error
2nd-then using NOST I booted my phone in download mode
Then NOST could only flash ta-1000 model ROMs
So what is it.WHY DOES NOST CAN ONLY FLASH THOSE ROMS WHICH BRICKED MY PHONE A MINUTE EARLY??
AND NOT THE STOCK ONE??
and one thing now I can changed it to Nokia 5 by just flashing any Nokia 5 ota update through applying upadte from sdcard which I downloaded from xda
And now my phone doesn't show POWER BY ANDROID logo while booting
It only shows NOKIA logo
And it doesn't show battery charging icon when the phone is switched off
Other things are working fine(TWRP,magisk)
Except fingerprint data which get lost after flashing any module .
Please read it I know it's very lengthy but suggest me what should I do
Thanks
Can you share guide of install nokia 6 ta1021 rom on nokia 5 running android pie
Jitender Baloda said:
Can you share guide of install nokia 6 ta1021 rom on nokia 5 running android pie
Click to expand...
Click to collapse
Mandatory ---Unlocked Bootloader
1st -download any monthly ota update of Nokia 6
Flash it ,it will be aborted
2nd -download Nokia 6 pie ota update from Nokia 6 forum
Flash it
(Both ota updates should be placed on external sdcard)
If this doesnt work then
Flash your phone with Nokia 6 fastboot firmware provided by hikari calyx
It will be done
If it gives an error then boot your phone to recovery
Shutdown from recovery
Now imp.thing is that your phone may be hard bricked at this time
So pc will show it as qhsb_usb bulk
Don't panic
Just open Nost or ost
And press power button
Your phone would boot into download mode
Now you can flash it with ta-1021
Give me your telegram profile name i need to talk on this