Related
Hello,
I´ve got some big problem wth my P8.
I rooted and flashed TWRP some days ago.
Yesterday and I wanted to install an update, OTA isn´t workng with root and TWRP, so I extracted the B170 update for my GRA-L09 with HuaweiExtractor and flashed the built zip, but now my P8 keeps on getting bootloops at huawei-startscreen.
Every try to restore an TWRP-backup ands up with the same sh*t and installing the update from dload on the SD with booting per volume up + down also ends with an error.
When I connect the phone in TWRP to an PC it also didn´t recognize the size of internal memory at all.. it only says internal memory.. for the SD it keeps saying me it has around 59GB..
and TWRP only says the internal memory is around 4GB, but it has to be around 11GB belive
I think something destroyed the internal partitions on my phone.
Is there a way to flash an update.app direct from pc or to restore faulty partitions?
Hope someone couldhelp me, the phne is only 3weeks old
try the three bottoms way update
but the dload file is formated sd card and shut down the phone and use the volume down and up and power at the same time and it will install the update.app but you must have stock recovery
raider2k9 said:
Hello,
I´ve got some big problem wth my P8.
I rooted and flashed TWRP some days ago.
Yesterday and I wanted to install an update, OTA isn´t workng with root and TWRP, so I extracted the B170 update for my GRA-L09 with HuaweiExtractor and flashed the built zip, but now my P8 keeps on getting bootloops at huawei-startscreen.
Every try to restore an TWRP-backup ands up with the same sh*t and installing the update from dload on the SD with booting per volume up + down also ends with an error.
When I connect the phone in TWRP to an PC it also didn´t recognize the size of internal memory at all.. it only says internal memory.. for the SD it keeps saying me it has around 59GB..
and TWRP only says the internal memory is around 4GB, but it has to be around 11GB belive
I think something destroyed the internal partitions on my phone.
Is there a way to flash an update.app direct from pc or to restore faulty partitions?
Hope someone couldhelp me, the phne is only 3weeks old
Click to expand...
Click to collapse
Can you still enter TWRP? Have you tried doing a Factory Reset?
I try one more time with dload on formated sd and three buttons.. we will see
and yes, I can enter twrp and can flash all sort of img´s in fastboot and switch between twrp and stock recovery.. but installing an full rom isn´t working.. factory reset and so on were done countless times..
Edit: now it´s getting worse.. twrp is still working, BUT after last attempt with 3-button-method I can´t touch anything, only power-button is working, no unlock or so on
is there some possibility to flash the phone with SPFlashTool to recreate partitions?
is it possible to get this repaired at a huawei-center? i´ve only unlocked bootloader and flashed twrp, but did not install root.. should relock bootloader be enough?
raider2k9 said:
I try one more time with dload on formated sd and three buttons.. we will see
and yes, I can enter twrp and can flash all sort of img´s in fastboot and switch between twrp and stock recovery.. but installing an full rom isn´t working.. factory reset and so on were done countless times..
Edit: now it´s getting worse.. twrp is still working, BUT after last attempt with 3-button-method I can´t touch anything, only power-button is working, no unlock or so on
Click to expand...
Click to collapse
Try to "factory reset" in TWRP and then install the stock recovery via fastboot again. I had the same problem like you before, but this fixed it. If it doesn't we could speak on Skype, if you want too.
R0flC0pt3r said:
Try to "factory reset" in TWRP and then install the stock recovery via fastboot again. I had the same problem like you before, but this fixed it. If it doesn't we could speak on Skype, if you want too.
Click to expand...
Click to collapse
This isn´t possible at all anymore.. fastboot always ends up saying "FAILED (data transfer failure (unknown error))"
Seems my phone phone now is not only bricked, after all these trys it is really bricked
raider2k9 said:
This isn´t possible at all anymore.. fastboot always ends up saying "FAILED (data transfer failure (unknown error))"
Seems my phone phone now is not only bricked, after all these trys it is really bricked
Click to expand...
Click to collapse
Don't you have any insurance, return policy or so?
Also, did you started fastboot via "CMD" with elevated rights ( Admin ) ?
R0flC0pt3r said:
Don't you have any insurance, return policy or so?
Also, did you started fastboot via "CMD" with elevated rights ( Admin ) ?
Click to expand...
Click to collapse
I have insurance.. but will they repair it, after all I have tried?!?
fastboot is working for example "fastboot devices" or so on.. only flashing ends up giving errors
So now my P8 was repaired because of damaged mainboard..
the situation now is, I have a full twrp-backup of my old device, but of course with the old IMEI.. now with a new mainboard it also has a new IMEI..
so can I restre my old backup, when keeping the EFS with the new IMEI or wont this work, because the backup was made with another IMEI?
can somebody tell me, if this is going to work?
hi
i same problem way ?
Try to flash this custom rom via recovery "do full wipe" , when your device work, then you can go back to stock rom via updater app. Or you can stay in this custom rom If you like it.
Here is the link for the custom rom :
http://forum.xda-developers.com/android/development/rom-huawei-p8-fromfuture-1-0-t3175436
Hi Guys
Is there posibility to flash stock rom via TWRP ?
thnx
for me the only way was to send it for a repair and get the mainboard exchanged.. flash via TWRP should work, if you have a rom in zip-format.. the huawei-roms itself aren´t compatible!
raider2k9 said:
for me the only way was to send it for a repair and get the mainboard exchanged.. flash via TWRP should work, if you have a rom in zip-format.. the huawei-roms itself aren´t compatible!
Click to expand...
Click to collapse
but twrp supports flashing .zip and .img too there is toggle button.. I have flashed B170 bootloader.img and stock recovery ,.. and phone is even more bricked..
There is no TWRP anymore and goes straight to Rescue Mode.. but I can still boot to fastboot but it says phone unlocked but in reality phone is not unlocked because when I tried to flash recovery via fastboot flash recovery recovery.img it threw at me ''not allowed ??? so why phone says unlocked then ??
how much did u have to pay for motherboard ?
XDADEVX said:
but twrp supports flashing .zip and .img too there is toggle button.. I have flashed B170 bootloader.img and stock recovery ,.. and phone is even more bricked..
There is no TWRP anymore and goes straight to Rescue Mode.. but I can still boot to fastboot but it says phone unlocked but in reality phone is not unlocked because when I tried to flash recovery via fastboot flash recovery recovery.img it threw at me ''not allowed ??? so why phone says unlocked then ??
how much did u have to pay for motherboard ?
Click to expand...
Click to collapse
you even seem to have bricked your flash-memory.. it´s something I got with my O8.. but it got repaired under warranty, because of faulty flash / mainboard.. so luckely I got a brandnew mb with new IMEI
raider2k9 said:
you even seem to have bricked your flash-memory.. it´s something I got with my O8.. but it got repaired under warranty, because of faulty flash / mainboard.. so luckely I got a brandnew mb with new IMEI
Click to expand...
Click to collapse
how much did u pay ?
as I said.. it got repaired under warranty, so I had nothing to pay
raider2k9 said:
as I said.. it got repaired under warranty, so I had nothing to pay
Click to expand...
Click to collapse
even if u messed it up ? they didn't tell you that u modified phone ? what did u tell them ? are you in UK ? I just sent it to huawei today mornning
raider2k9 said:
as I said.. it got repaired under warranty, so I had nothing to pay
Click to expand...
Click to collapse
how long did u have to wait ? when they sent it back to you ?
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
shubhambhise said:
Go with qpst/qfil method to recover your phone
And did you tried changing the USB port or cable while side loading cos ROM .. Cause most of issues are solved by the changing USB port or cable.. So try this.. Or else qfil is the option
Click to expand...
Click to collapse
Hello,
I got help on the telegram group, we try many thing, the result is that I can only get ZUI working, if flashing COS via QFIL, I get the same result, if I flash ZUI, unlock bootloader, flash TWRP, wipe everything, then sideload CM13, TWRP say that no os is installed and I get a bootloop at the bootloader ...
ZUI is good, but I get some error regarding notification.
If you have any other idea ?
wackou said:
Hello,
Ok, here is the situation
I have a Zuk Z1 with last COS update 12.1 with locked bootloader, no root etc ... (I didn't touch anything).
Yesterday, it reboot by itself but I got bootloop (starting apps then again lenovo boot image ...)
I try to factory reset by using the recovery metohd, it's start normally (optimizing apps ...) but then reboot and again bootloop ...
So I try to sideload the official COS ROM from Cyanogen Support (cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394.zip), but the sideload stuck at 47% and saying total xfer: 1.00x and the phone go back to recovery but still have boot loop ...
I try to boot in fastboot and use the All In One tool to flash official ROM but didn't work (Its say that the bootloader is lock)
I find without knowing this menu a debugging hardware tool test, and then I run the test, its say SD : Fail and in another I got SD : Fail and no sd fuse in dir
I saw many thread here and on google, and some say that we have to use qfil/qpst method, and find this which seems complete : http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/
But as I don't know if its hardware issue or soft brick ...
Could someone help me to recover my phone to COS or CM by using the right method ?
Thank you !
Click to expand...
Click to collapse
Hope this will help you
Check this out
http://forum.xda-developers.com/zuk-z1/help/helpppp-t3505990
http://forum.xda-developers.com/zuk-z1/general/guide-how-to-unlock-root-install-twrp-t3394037
This will help you
i have tried every twrp but phone stucks on galaxy s7edge screen when trying to access recovery ? plz anybody ?
i have done many posts related to my s7edge g935f , its just kept in the cupboard and cant use it from several months because of the dmverity error , i need to root it and use custom rom plz ?
Put the phone in download mode, use Samsung Smartswitch to reinstall stock rom
surfer3000 said:
Put the phone in download mode, use Samsung Smartswitch to reinstall stock rom
Click to expand...
Click to collapse
i have already done that , it stuck on modem part , secure check radio fail and when i flash without modem , it successfully flashed but root issue , when i flash twrp , it doesnt boot into into twrp and stuck on logo?
I do not believe that you see a "modem" part when using smart switch? Otherwise use Samsung Kies for S7 edge. And do the Firmware Upgrade and Initialization menu item
surfer3000 said:
I do not believe that you see a "modem" part when using smart switch? Otherwise use Samsung Kies for S7 edge. And do the Firmware Upgrade and Initialization menu item
Click to expand...
Click to collapse
i have done every try , it doesn't accept the modem part , i am teally confused about it , so much long time passed and just kept the phone useless, samsung switch is showing it g935f o2u model but not accepting o2u firmware too
suhaibahmad said:
i have done every try , it doesn't accept the modem part , i am teally confused about it , so much long time passed and just kept the phone useless, samsung switch is showing it g935f o2u model but not accepting o2u firmware too
Click to expand...
Click to collapse
Mmmm, before u flash TWRP, u should enable oem unlock on developer option
aditia581999 said:
Mmmm, before u flash TWRP, u should enable oem unlock on developer option
Click to expand...
Click to collapse
yes i have enabled that and also usb debugging
What to do : Reflash the stock firmware , after that is completed , turn off the phone , and install on your pc : the No verify Opt encrypt 5.0 from here:
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.0.zip
And the SuperSu file from here :
https://download.chainfire.eu/supersu
Now go download the latest Odin, and connect your phone.
Flash the Twrp 3.1.0.0 ( be aware to choose the file for Hero2lte) and reboot to recovery.
DO NOT LET IT BOOT INTO THE SYSTEM.
IF IT DOES , IMEDIATLEY CLOSE THE PHONE AND BOOT INTO RECOVERY .
Once you are in recovery , firstly go to wipe and do a factory reset .
Then connect your s7E to the PC while you are in the TWRP , and copy the SuperSu file and the verity opt oncryption to the storage.
Note: if you have an SD card inserted , copy the files to the SD not the internal storage.
Now , pay attention , If you don't do the next steps in the right order , you may brick your beautiful 800$ phone.
So pay attention , you have to firstly run the No verity encrypt file.
After it's done, go back >reboot>reboot in recovery.
Now search the file and run it (the SuperSu file)
It will take a bit longer to flash the SuperSu.
After it's done , reboot
Note: your phone should reboot 2 times , If it doesn't or it reboots more than 3 times, CLOSE your phone , and repeat the whole process.
IF your phone reboots 2 times , your are good to go .
The first BOOT May take some time (usually around 6 minutes) and it may loop a couple times, DO NOT INTERRUPT THE PROCES !
IF your phone boots up successfully, configure it and run a root checker , it should say : congratulations your device is rooted.
IF IT doesn't, well you have had to mess something up during the process.
Hope that helped , let me know if it did
allahTch said:
What to do : Reflash the stock firmware , after that is completed , turn off the phone , and install on your pc : the No verify Opt encrypt 5.0 from here:
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.0.zip
And the SuperSu file from here :
https://download.chainfire.eu/supersu
Now go download the latest Odin, and connect your phone.
Flash the Twrp 3.1.0.0 ( be aware to choose the file for Hero2lte) and reboot to recovery.
DO NOT LET IT BOOT INTO THE SYSTEM.
IF IT DOES , IMEDIATLEY CLOSE THE PHONE AND BOOT INTO RECOVERY .
Once you are in recovery , firstly go to wipe and do a factory reset .
Then connect your s7E to the PC while you are in the TWRP , and copy the SuperSu file and the verity opt oncryption to the storage.
Note: if you have an SD card inserted , copy the files to the SD not the internal storage.
Now , pay attention , If you don't do the next steps in the right order , you may brick your beautiful 800$ phone.
So pay attention , you have to firstly run the No verity encrypt file.
After it's done, go back >reboot>reboot in recovery.
Now search the file and run it (the SuperSu file)
It will take a bit longer to flash the SuperSu.
After it's done , reboot
Note: your phone should reboot 2 times , If it doesn't or it reboots more than 3 times, CLOSE your phone , and repeat the whole process.
IF your phone reboots 2 times , your are good to go .
The first BOOT May take some time (usually around 6 minutes) and it may loop a couple times, DO NOT INTERRUPT THE PROCES !
IF your phone boots up successfully, configure it and run a root checker , it should say : congratulations your device is rooted.
IF IT doesn't, well you have had to mess something up during the process.
Hope that helped , let me know if it did
Click to expand...
Click to collapse
thanks for such a nice tutorial , the problem is my phone is o2u and flashing issue in the modem part even i have tried with samsung switch , anyhow that is not a big issue now whenever i only flash ap , the phone boots successfully and i can enable oem unlocking and developer option and when i flash twrp and wants to boot into it , the phone stuck there
suhaibahmad said:
thanks for such a nice tutorial , the problem is my phone is o2u and flashing issue in the modem part even i have tried with samsung switch , anyhow that is not a big issue now whenever i only flash ap , the phone boots successfully and i can enable oem unlocking and developer option and when i flash twrp and wants to boot into it , the phone stuck there
Click to expand...
Click to collapse
I had the same issue to fix.
open smart switch and use the emergency initialization and recovery feature.
it will ask for your model and serial number which is on a sticker on the back of your phone.
Cosmic Blue said:
I had the same issue to fix.
open smart switch and use the emergency initialization and recovery feature.
it will ask for your model and serial number which is on a sticker on the back of your phone.
Click to expand...
Click to collapse
I have tried that , that also stucks in the modem part and give radio fail secure check error , i cant even flash it , i was thinking i will root it and install a custom rom but it cant boot to twrp , and if i just flash the AP part then the device boots successfully and the imei and baseband everything ok . Just the hidden codes not work , its really a weird issue , im really confused about it
suhaibahmad. When you refer to "whenever I only flash AP"you are referring to using ODIN, NOT SMARTSWITCH. There is a difference.
surfer3000 said:
suhaibahmad. When you refer to "whenever I only flash AP"you are referring to using ODIN, NOT SMARTSWITCH. There is a difference.
Click to expand...
Click to collapse
on smartswitch it stucks in the modem part and flash radio fail error on the screen . and now come to odin , if i just flash AP in odin then the phone boots successfully but not good performance and cant even root it
Plz anybody help , my phone is just a piece of .....
i cant root my s7edge , the latest nougat february patch installed ? am i the only one ? i untick the auto reboot in odin and manually boot into twrp after flashing it but its stucked thereand not booting into it , it is the latest twrp hero2lte 3.1.0.
i cant even flash rom on odin or through smart switch , it fails in the modem part . when i flash without the modem then flash successfully but after flash reboot and for a minute NO COMMAND screen appears , after a minute goes into recovery and saying DM VERIFICATION FAILURE .after this when i flash the csc again , the no command prompt disappear telling NO SINGLE SKU SUPPORT and dm-verity error...., then when i reboot it , the phone boots normally but keeps on crashing the applications and force closed and sometimes reboot.
The imei is normal and signals of sim works fine. On PHONE INFO application it shows that the csc is missing . The hidden codes are not working like *#0*# , *#06# etc etc .
plz someone tell me whats the issue is ? is it a hardware or software ? will jtag resolve the issue ? i dont even know about wat is jtag , i have just heard about it . Long time passed the device price decreased in the market about 200 dollars and no solution , kept in the cupboard. I hope i can get info atleast ,i have many posts here but nobody responses . maybe i am the only one who is facing this issue .
I've had that kind of problems with other samsung phone. I had to use adb and fastboot to get recovery working.
so you still have stock recovery? have you tried factory reset?
yaro666 said:
I've had that kind of problems with other samsung phone. I had to use adb and fastboot to get recovery working.
so you still have stock recovery? have you tried factory reset?
Click to expand...
Click to collapse
yes i am on stock recovery , also tried factory reset .
tell me how did u do with fastboot ? i think fastboot works on rooted phone right ?
I'm not 100% sure, it was in bootloader mode and I don't know if s7 has the same procedure. you should start with enabli g usb debugging and unlocking bootloader.
are you sure you have exynos version?
yaro666 said:
I'm not 100% sure, it was in bootloader mode and I don't know if s7 has the same procedure. you should start with enabli g usb debugging and unlocking bootloader.
are you sure you have exynos version?
Click to expand...
Click to collapse
usb debugging is enabled , it is g935f model , on samsung smartswitch it is detected as o2u model
suhaibahmad said:
i cant root my s7edge , the latest nougat february patch installed ? am i the only one ? i untick the auto reboot in odin and manually boot into twrp after flashing it but its stucked thereand not booting into it , it is the latest twrp hero2lte 3.1.0.
i cant even flash rom on odin or through smart switch , it fails in the modem part . when i flash without the modem then flash successfully but after flash reboot and for a minute NO COMMAND screen appears , after a minute goes into recovery and saying DM VERIFICATION FAILURE .after this when i flash the csc again , the no command prompt disappear telling NO SINGLE SKU SUPPORT and dm-verity error...., then when i reboot it , the phone boots normally but keeps on crashing the applications and force closed and sometimes reboot.
The imei is normal and signals of sim works fine. On PHONE INFO application it shows that the csc is missing . The hidden codes are not working like *#0*# , *#06# etc etc .
plz someone tell me whats the issue is ? is it a hardware or software ? will jtag resolve the issue ? i dont even know about wat is jtag , i have just heard about it . Long time passed the device price decreased in the market about 200 dollars and no solution , kept in the cupboard. I hope i can get info atleast ,i have many posts here but nobody responses . maybe i am the only one who is facing this issue .
Click to expand...
Click to collapse
I flashed the firmware all back to stock then i flashed twrp in odin and you need to use the supersu beta sr3 (you need to see if it is the sr3 supersu beta), only this work in nougat. follow the steps to root like always
GuevaraJezuss said:
I flashed the firmware all back to stock then i flashed twrp in odin and you need to use the supersu beta sr3 (you need to see if it is the sr3 supersu beta), only this work in nougat. follow the steps to root like always
Click to expand...
Click to collapse
the supersu can be flashed in twrp and i cant boot into twrp ?i have tried couple of times , flash firmware through odin and then untick auto reboot and flash twrp by enabling developer oem unlock option , everything i have tried ,
Try to use superman rom. It support root inside
ledanh89 said:
Try to use superman rom. It support root inside
Click to expand...
Click to collapse
to flash superman rom , i need twrp but the main problem ia i cant boot into twrp ?
suhaibahmad said:
i cant root my s7edge , the latest nougat february patch installed ? am i the only one ? i untick the auto reboot in odin and manually boot into twrp after flashing it but its stucked thereand not booting into it , it is the latest twrp hero2lte 3.1.0.
i cant even flash rom on odin or through smart switch , it fails in the modem part . when i flash without the modem then flash successfully but after flash reboot and for a minute NO COMMAND screen appears , after a minute goes into recovery and saying DM VERIFICATION FAILURE .after this when i flash the csc again , the no command prompt disappear telling NO SINGLE SKU SUPPORT and dm-verity error...., then when i reboot it , the phone boots normally but keeps on crashing the applications and force closed and sometimes reboot.
The imei is normal and signals of sim works fine. On PHONE INFO application it shows that the csc is missing . The hidden codes are not working like *#0*# , *#06# etc etc .
plz someone tell me whats the issue is ? is it a hardware or software ? will jtag resolve the issue ? i dont even know about wat is jtag , i have just heard about it . Long time passed the device price decreased in the market about 200 dollars and no solution , kept in the cupboard. I hope i can get info atleast ,i have many posts here but nobody responses . maybe i am the only one who is facing this issue .
Click to expand...
Click to collapse
anybody got the same issue , plz ?
However, if you are watching this, it means ur phone is bricked with huawei p10 lite/p10/p10 plus
Read the replies and follow the instruction noted by @Blackball and his links.
Then you will find you self a way to restore the phone.
Thanks again to @Blackball and rest of you guys, much appreciated for your help.
What on earth is Yoroot?
So, You can't enter fastboot mode am i right ?
Do you connect usb cable to your devices before press Vol- and Power button ?
Current Situation
After the battery was dead, i actually can enter the fastboot and i used TWRP 3.1.1 for huawei P10 Plus from github. double wiped my device and by far i have entered the system normally.
However, the ROM wasn't official and i lost my warranty for unlock my huawei phone. And the custom service from Huawei said that they don't provide any official ROM Since it's Android 7.0 .
This ROM is really crappy that i can't delete/uninstall any Application i installed.(It gets reboot everytime i try to and the Application is still there even i just tried to Delete/Uninstall).
Worst of all, some options does not work properly in "Option" menu . (For example i can't access to "Developer mode" that everytime i press it it tabbed back to the former menu.)
I really hate this crappy menu so i tried to search on the internet for P10 Plus ROM so far i get B133 update ROM i can find and i tried to install it from SDcard by pressing VOL - and VOL + and Power buttom.
It says failed to update system at 5% while updating/recoverying the system.
and the ROM which i'm using was found in HUAWEI's official fan forum from Club.Huawei.com a forum belongs in china.(Rooted rom B140).
Right now seems the only option for me is to find a better ROM than this .(At least won't get me so many bugs like this one .:crying: )
and Thanks for your comment "Bigbearxl" it worked as normally it should after the battery was dead then i recharged it.
Yet Right now the PC doesn't recognize the device though Via-Usb because it's not Huawei official ROM and Hisuite helper only recognize their own ROM and the rest Phone helper or ADB can't recognize the device while The Phone is Booting normal .
And Reply to "Craphead" Yoroot is a special Root tool for Huawei P10/P10 plus made by chinese from Huawei Fan Club forum.
New Update
After rewrited boot.img though fastboot mode from https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946 thanks to "yury_z, " i can start to delete files with current system, but it's still crappy that it doesn't even have camera
So i think i will try dload method to recovery my phone with firware that i found in forum.
Failed
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:
This work for P10plus too
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
WackyJoker said:
Looks like i have to stock with that bit longer
dload with update.app method failed. and recovery TWRP install missing md5.
Unless i get System.img or i guess i can't get another system.:crying:
Click to expand...
Click to collapse
Maybe you could also try installing stock firmware with funkyhuawei, it's not for free though. But dload method never works on P10/plus unfortunately.
thanks @Blackball and @Craphead. i checked both of your method but didn't work and this new twrp 3.1.0 i downloaded displayed sd card 0mb. and i followed poster's step and missing one file.
However i might found a useful Thead that might work and i'm gonna try tonight.
http://www.stechguide.com/huawei-p10-plus-b133-nougat-update/
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
@Blackball not sure you what you mean by that, do you mean that you can actually use it to install firmware on p10/p10 plus now? If so how did they manage to get around the authentication issue?
I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.
Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well i tried your method but there were some file that can't be downloaded from that post so i used another and,eventhough with complete files, the method i posted and i was going to use it tonight. Failed.
did all the steps from update.bat indicated and all worked fine till the last step that it says " automaticly install system" and the phone shows error at recovery.(similar to dload method because it automaticly create dload and exact those ROM files)
it indicates a big red " ! " sign and stopped. basicly i'm back to "No System Status"
The only method wowrks for my "P10 Plus" is " flash system system.img " method.
yet i don't know how to exact system.img boot.img recovery.img etc from those stock firmware like those chinese.
i have some of their rewrote roms (it's crappy because i has no default camera and it's for chinese P10 Plus A.K.A VKY_L29) .
Yet i can't find any System.img on google by far.
Blackball said:
I debranded my phone from L09 to L29 DualSim with this guide. It work with moded stock recoverys.
Click to expand...
Click to collapse
I haven't tried your Firmware Finder method , i think i can install crappy system.img then try your Firmware Finder method.
Because right now i wiped my system and i'm without system :crying:
Guys This Thead https://forum.xda-developers.com/showthread.php?t=2315547
tells you how extract flashable rom files from firmware update.app.
It should work but i only made to Unknownfile XX .img and i can't download his script "HuaweiFinder" from his google drive.
Holy Crap it worked, i Extracted system.img and other img from update.app by some Chinese scripted unpack script. and I'm trying to restore my device though fastboot mode with adb.
Blackball said:
That is what I wrote.
It seems that firmware finder work for P10/plus now.
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Click to expand...
Click to collapse
well just tried your method and at last step it says installing failed. then i reboot entered rec mode choose wipe/factory reset
wiped till 50% and stopped, it can't factory reset.
Before this method fastboot mode was " Phone unlock " " Bootloader unlock."
Now it's just "Phone unlock"
now i'm stuck at boot loop "your device is booting now" then it rebooted and back to "your device is booting now" again then automaticly goes to Erecovery mode. I have to shutdown device for now and hope i can find some solution tomorrow :S
When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.
Blackball said:
When you try this :
https://forum.xda-developers.com/showthread.php?t=3593108
It's important that you have the 3 zip files from your wanted firmware and rename them correctly. Don't mix with another firmwares.
Click to expand...
Click to collapse
i did this method yesterday and, well, i can't get update_full_VKY-L09_hw_eu.zip from the link : http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1475/g104/v85029/f1/full/filelist.xml . only Update.zip and Update_full_data.zip . the other one "update_full_VKY-L09_hw_eu.zip" i had to get it from another webside (it's also b133)
it shows a big "!" sign at the last step . i did everything it tells and tried both sdcard&script way to flash twice both rebrand&same brand update.
after the failure i can't enter "Vol +" and "Vol -" and "Power button" to do dload method . When i try to do that it just goes in Recovery mode.
In recovery mode i tried to wipe data/factory reset. It stopps at 50% which is after wipe and starting to factory reset at 50% it failed.
i try to flash in system.img and boot.img yet i still can not enter the system and stuck at bootloop.