Hi got the xda1 rom/radio upgrade from o2 web site.
installed radio upgrade first, it then asked me to remove ac power, i took it off dockign station, it rebooted, asked me for a simlock.. to which there was no mention of in the upgrade instructions.. i turned it off and on, and now it wont even boot up.. comes on with 02 logo.. then a white screen with blue banner at top..
what can i do to fix it??
i cant even see it on the pc!!!
please advise, i really hope i have not broken it.
can o2 do anything?
i can get to the bootloader by holding down power when soft resetting phone.. comes up with gsm error...
then nothing....
i can get to other menu about sd backup ect if i hold down the two buttons at top of unit when in bootloader.
how do i go about repairing the radio and rom ??
is it possible?
bootloader
ok, i can copy the rom ect from xda to sd card... and even copy it back over again.. so if i put the sd card in a reader on the pc.. and put a good rom and radio on it.. will it work ok booting off the sd card?
i can get to that menu from the bootloader..
You need to get a working rom installed then try to address the gsm error, I never heard of an xda asking for sid code when doing an official upgrade. Did you leave your sim card in the xda when it was updating the radio stack? You may be aware from reading on the forum that radio stacks once corrupted are very difficult if not impossible to rectify. I would suggest unpacking the rom you downloaded, burn just the ce part to rom using sd/bootloader method, then try to install gsm again, this time without sim inserted, you will find here on the forum the instructions to burn gsm from sd card, do this after you have a working bootable system. Good luck.
yes., the sim card was in the system at the time.. its an 02 sim card however, so i guessed this was ok.
printed out the 10 page instructions on how to upgrade s.ware so there was no problems (like this)
the radio stack was installed before the rom if that makes any difference?
is it possible for the xda1 just to lock up like this without having done it the way i did?
perhaps it would have done this anyway??
just thinking i could bring it back to place i got it at and not inform them of the s.ware upgrade that caused the problem to see if they can replace it or something...
just an idea, coz at the moment im kind of stuck.
Hi ...
If you managed to reinstall the ROM through SD card, does it mean you have a bootable system but the RSU doesn't work ?
If so and you can access the XDA from Activesync, then you may locate the 4 files of the RSU upgrade from the \windows\startup directory ... delete them then a hard reset may flash the original RSU back if it's not screwed up.
it should be possible to flash the rom via sd, as i can dump the faulty one to sd and then back over.. so, that part of the bootloader works.
ill ring the place ig ot it at and see what they can do, as it just "went off, all by itself"
i would try the sd flash myself but i aint got a card reader for sd.. just smart media.. lol
it doesnt sound as bad as some peoples s.ware problems however, as the bootloader seems to work ok.,. so fixing it may be possible, but ill give place i got it off a ring first.
thanks for all the info.
If it is under warranty and using the official flash upgrade destroyed the gsm radio stack then O2 should repair or replace. Radio stacks are very difficult to repair and people have asked about getting it fixed only to be told the mainboard needs replacing at huge cost.
thanks for the info, i got a sd card reader, but when i put the thing into pc it asks to format it so it wont read the stuff ive dumped from xda to the card..
oh well, ill give these guys a ring to see what they can do.
where can i get hold of the files to put to the sd card?
ive got the rom/radio files, but they are pc exe`s and not seperate files..
well, i got it flashed ok using official 3.17 s.ware via sd card..
on powering up, it still fails, just white screen with blue top, although there is a keyboard icon on the bottom right which was not there before.
still get gsm error on bootloader..
if only there was a way to put new radio stack on it via sd
djkus said:
well, i got it flashed ok using official 3.17 s.ware via sd card..
on powering up, it still fails, just white screen with blue top, although there is a keyboard icon on the bottom right which was not there before.
still get gsm error on bootloader..
if only there was a way to put new radio stack on it via sd
Click to expand...
Click to collapse
Dead phone, you need send service center to repair, or to me
I tried to downgrade my 5600 to wm2003se that was the original os and I had upgraded it to wm6 but want to go back and since I didnt make a backup of the rom I used the updater from Orange to try and downgrade it after following some instructions I saw on a website.
But now the phone just show the orange uk startup screen then goes into the bootloader I tried using the imate wm2003se update it updated successful but when I start the phone a get the imate startup screen and then it goes into the bootloader again. Another thing is that the updaters when I ran them (I reran the orange uk updater so the orange rom is now on the phone again) both show that there was no rom loaded to the phone, all the information the phone model and the other info are completely blank.
I've tried looking up how to fix it but the only solution all the sites give me I cant do cause I dont have a sd card and even if I did my computer cant read sd cards and I dont have a sd card reader either.
I'm sure your wondering about the version of my bootloader it version 1.x, sorry I cant be more specific cause the phone screen does work properly and the only way to get it to show properly most of the time is to push the end call button up and hold it there. A solution to that would appreciated as well but right now I'm more wanting a solution for the bootloader problem I'm having.
hi all i dont seem to be able to put any other roms onto my xda now i have got the htc rom on at min but i dont get any signal with a sim card in, when i try to uspl it, it doesn't go the full length, then if i try to put any other rom onto it, it comes back with the error saying the image is corrupt i am using xp so i dont know what else i can try really any help would be gratefull,
UPDATE
can some one help me with this
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.
ok i had this problem and fixed it.
You need to install the original rom.
do you have a SD mem card?
sorry didnt read ur post properly.
Can you get into bootloader
try this. do the factory reset on this thread. it worked for me.
if you cant get it working PM me
http://forum.xda-developers.com/showthread.php?t=306904
bootloader problem
hi there thanks for ur help i cannot get (upgrade tool) the link isnt working so not sure what else to try so any help would be greatfull yeah i have a micro sd card its a 1 gig is that too big as its the smallest i have got thanks
i have just managed to install the stock o2 firmware onto the orbit but when i go to switch it on the screen fades away and goes different colours, what does it mean ????
hmm ok the screen fades away and goes into different colours.
is the screen blue/red/green stripes or does it crash into a white screen?
screen problem
i have managed to get the stock o2 rom on now and i think there could be a problem with the battery as it doesnt always switch on so i have ordered a new battery and i am hoping it will work as good as new once the new battery is in so thanks for all ur help
it could be the battery.
but in my case it was the internal clock battery that was leaking,
it could be the battery.
but in my case it was the Rechargeable Reflow Backup Capacitor that was leaking,
"it could be the battery.
but in my case it was the Rechargeable Reflow Backup Capacitor that was leaking, "
I have the same problem (new phone now but still want my p3300 to work)
is it possible to repair/change that part? could someone provide a picture or explain to me hoe to see if i got the same fault (my phone is opened)
hello guys
today i bought the optimus gt540, and played with it for a while without a sim card in it. later when i inserted a brand new sim card, the phone didnt recognise it, says invalid card. the card works on other phones, and other cards work in the optimus.
i also put a pin code protection on the sim, and when optimus starts up it asks for the pin code.
please help
If you got an garanty for the mobile, take it to the service, if not, flash your mobile with mur4iks latest swiftdroid and i think it would work !
wish u luck !
It doesn unlock phone when you put murik's swift.....
Any other pin unlocker-generator ?
Hello guys,
im facing a problem with my samsung a300h ,after i installed this rom :https://forum.xda-developers.com/samsung-a-series/development/rom-lineageos-14-1-unofficial-samsung-t3532574 at the begining every thing was ok i can use both sims without any issue for a long time untill i changed network mod from lte only to 3g then the phone stoped recognise the sim slots and shows no sim card i tryied to flash the stock rom but it didnt fix , when trying to remove sim 1 the phone starts recognise sim 2 but when i put the sim 1 back again the problem shows again "no sim card" i still can recive sms but when i trying to make a call it shows "no network" and when i make a call from another phone to my number it rings but my phone doesnt show any incomming call .
i'd be really thankful if someone can help me with this problem
logcat file:https://drive.google.com/uc?authuser=0&id=1-bUYlE25Q58vP9AUKf6WXTNOZQCZdvBi&export=download
excuse my english :cyclops:
Flash stock rom
Flash official stock rom via odin..
I think after flashing stock rom on your device you will fix this bug...